Posting with MM Movement Type 309 material to material: Error in WM

Hello,
i post an MM-Movement type (Bewegungsart) 309 (material to material).
The MM-goods movement works, but then in warehouse mangagement there is a problem:
The creation of the transfer order (Transportauftrag) stops in many cases.
The aim is to post Material A to the same storage bin in Warehouse Management where Material B was before.
I programmed this in user-exit (ZXLToU03) that by movement type 309, always taking same storage bin. But then I often get the error: transfer order could not be created. Then I have to do the creation of tranfer order in foreground and then I get an error like this:
capacity of the bin location is not enough.
The Problem is that I do a posting for example:
001 010101                   to     922 Umbuchungzone    -->  Transfer order Pos 1
922 Umbuchungszone  to    001 010101                    --> Transfer order Pos 2.
And so the first transfer order position is not confirmed when I do the transfer order Pos 2.
How can I confirm Pos 1 by batch-input? The Programm to do 309 should posting 1000 materials in one step. But in Warehouse management I get those problems?
Is it possible to increase the capacitiy of the storage bin and then decrease it after creation of transfer order(where can I do this and when)???
I hope anybody can help me.
Thanks.

Hello Kevin,
I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
Success and thanks beforehand for any credits!
Kind regards,
Bart

Similar Messages

  • BORGR 649 error message while posting with 105 mov type

    Hi Gurus,
    I faced a problem when I try to post with 105 mov type, when material doc is related to Inbound delivery.
    Explained better:
    I did a purchase order with inbound delivery confirmation.
    I carried out Good Receipt (related to Inb delievery) with mov type 103 (blocked stock from PO)
    When I try to post stock with 105 mov type, the following error appear:
    "Movement type 105 not allowed as it is not assigned to item category"
    Msg ID: BORGR
    Msg no: 649
    I already checked delivery item category configuration, movement types involved and transactions allowed for each mov types.
    Take care that the error mentioned doesn't occur if posting is related directly to purchase order, instead of inbound delivery..
    Thanks in advance
    Regards
    Ale

    Hi Sandra_PF
    in the inbound delivery the mov type is not 105, but 101 (correct, it's the default value for Inb delivery)
    With transaction MIGO I do 2 different operations (in 2 different moments):
    1°) Good Receipt referred to Inbound delivery (103 mov type - Blocked stock from PO)
    2°) Stock posting with 105 mov type, to transfer stock from Blocked to Unrestricted
    Here the system notice me that is not possible, because the mov type 105 is not assigned to the delivery inboud category.
    Please note that we did the same thing in another system with the same configuration, without any problems..
    Cheers,
    Ale

  • Post with 561 movement type without affecting MAP

    Hi all,
    I have a scenario for Raw Material with Moving Average Price.
    When posting inventory with movement type 561 we are able to enter the Amount in LC.  I have set the value here as 0.01 but once I post the document the Moving Average Price in MM03 changes with respect to this value.
    I would like to ask is there any way to book stock into inventory without affecting the Moving Average Price.
    Thanks.

    >
    jamison2004 jordan2004 wrote:
    > Hi,
    >
    > Sorry, let me elaborate my requirement.
    >
    > For example :
    > Current Moving Average Price is 1.5
    > Current Inventory Quantity is 1000
    > Current Inventory Value = 1.5 x 1000 = 1500
    >
    > Requirement :
    > Posting excess stock using 561
    > Receipt Quantity : 500
    >
    > After posting, I want the Moving Average Price to remain as 1.5
    >
    > Can you please tell me the solution for this?
    >
    > Thanks
    Do not enter any external value, just post the quantity, and SAP will not change the MAP.
    But of course your stock value will increase by 500 x 1,5
    there is NO WAY to post a quantity of 500 with no value   for a valuated stock managed material and keeping the MAP uneffected.
    if you post with value,  then the MAP keeps constant but your total stock value goes up.
    if you post with zero value, then the MAP goes down.
    OF course you can then change the MAP again with MR21, this will create the next accounting document then.

  • Change the behavior for movement type 309 - Account post PRD

    Dear friends ,
    We need to transfer material to material using movement type 309.
    These material are using price control "S".
    When we transfer from material A to material B the price difference stay stopped in the PRD account.
    We need to revaluate the material B automatically and not let the price difference stopped in the PRD... when we run the Material Costs..via Material ledger.
    Does anyone knows a way to change this behavior ?
    best regards,
    Alessandro

    Dear Revi thanks for your answer !
    One more thing...
    We cannot change the valuation from S to V in the material B.
    Regarding the PRD postings... when the Controlling team runs the Material Ledger the price for material B should be changed/updated automatically, Am I right ?
    And then the PRD account must be cleared...
    Or I continue to do the MR22 manuall...or better... create an Abap program to run automatically clearing the PRD posting agains't the material via MR22 to correct the cost of this material.
    thanks once more.
    Ale

  • Post extra goods recieved with 501 movement type

    Hello experts,
    I have a requirement that after PO, at the time of MIGO if extra quantity is received from vendor then that extra quantity should automatically get posted in background with movement type 501 and the actual quantity will work as normal.
    Like: if purchase order is of 100 quantity and quantity received from vendor is 150 then at present when i am trying to post error message is coming "quantity exceeded by 50 quantity" but I want this 50 quantity should get posted with 501 movement type automatically in background.
    How should I do this??
    Please help.

    HI
    Hi,
    Is it possible if I ask abaper to debug the code and insert some code within.
    Is it the right solution to insert programming lines within standard sap transaction code???
    NOT possible
    I have some question for you
    1) What will be accounting posting for 501 it will same as 101 or different
    it will different
    2) system will generate two accounting document or one
    If two how you will post MIRO ,because 501 not link with PO
    Regards
    kailas Ugale

  • Error in Standard SAP movement type 309?

    Path: SPRO > Logistic execution > Warehouse Management > Interfaces > Inventory Management > Define
    Movement type > Assign WM Movement Type References to IM Movement Types
    IM Movement type 309 has as Reference Movement types WM 301, 302 and 309.
    IM Movement type 311 has as Reference Movement types WM 311, 312 and 309.
    Path: SPRO > Logistic execution > Warehouse Management > Interfaces > Inventory Management > Define
    Movement type > LE-WM Interface to Inventory Management
    Reference Movement type 301 has WM Movement type 301.
    Reference Movement type 302 has WM Movement type 302.
    Reference Movement type 309 has WM Movement type 309.
    Reference Movement type 311 has WM Movement type 311.
    Reference Movement type 312 have WM Movement type 312.
    Path: SPRO > Logistic execution > Warehouse Management > Activities > Transfers > Define Movement
    types
    WM Movement type 301 has Destination Storage type 920.
    WM Movement type 302 has Source Storage type 920.
    WM Movement type 309 has Source and Destination Storage type 922.
    WM Movement type 311 has Destination Storage type 9210.
    WM Movement type 312 has Source Storage type 921.
    In my opinion this means that if I make an IM movement with movement 309 the material will be picked from a Storage
    bin and moved to Storage type 920. After the change the material will be brought back from Storage type 920 to the same Storage bin.
    The change will be done with WM Movement type 309 in Storage type 922.
    This creates negative stock in both Storage type 920 and 922.
    In my opinion this means that if I make an IM movement with movement 311 the material will be picked from a Storage
    bin and moved to Storage type 921. After the change the material will be brought back from Storage type 921 to the same Storage bin.
    The change will be done with WM Movement type 309 in Storage type 922.
    This creates negative stock in both Storage type 920 and 922.
    Is this an error in SAP standard? Should I Change the Source and Destination Storage types of Movement types 301,302,311 and 312 to 922?

    Hi,
    Please check wheather the material type of the material belongs to NLAG/UNBW or any other type which will not have qty/value updations for that plant at Attributes of the material type at SPROlOGISTICS GeneralMaterial mastermaterila types
    Or take the question  mark which is there on the error screen so that the information will become self explanatory.
    Please reply back with your info.

  • Where to configure which stock type to post in a movement type?

    Hi,
    As we know , when we carry out a posting with a movement type, e.g. mvt. typ. 261, system will automatically post to unrestricted-use stock. And if mvt.typ. 331, system will post to QI stock.
    I'd like to ask where to configure movement type to let it know which kind of stock type(not special stock, like E,K,etc.) to post.
    i.e. if I create a new mvt. typ. , where can i set it to post to unrestricted-use , QI or Blocked stock?
    I can find T156M-BUSTM and T156M-ZUSTD are relevant to stock type posting, but i don't know where to connect these fields to movement types.
    Thanks in advance!
    Wesley

    Hi,
    Normally there will be two types of  moments available broadly.Material inflow and material outflow moments.During outflows we tell the system to take the stocks from which stock type and storage location and during inflows we tell to post to which stock type and sorage location.
    The moment type 261 is a issue against an order and which has always to be from unrestricted .
    and 331 is to issue towards stock to Quality inspection.
    During inflows we can tell to the system through material master,vendor,or purchasing document to get posted to which stock.
    For outflows system always takes from unrestricted and issues and if there is no stock in the storage location unrestricted , system provides a error message.
    But however you can create a moment type at SPROMMIMMoment typescreate (OMJJ).
    Regards,

  • Movement Type 309 Not posting to the correct Cost Center

    Hi,
    We have changed the field status group for movement type 309 to be able to enter profit center. We maintained a cost center determination in OKB9 based on the profit center. However the system is ignoring the profit center entered in the MIGO (309) and picking the profit center from the material master.
    Material Master has Profit center 40000.
    MIGO posting has Profit Center 43005 which in turn has a cost center assigned to 100143005 cost center.
    When we do MIGO 309, with the profit center 43005, the accounting document is posted with profit center 40000 and cost center 100140000. Can anyone tell why is it ignoring the profit center maintained in the transaction?
    I also checked OMJJ and checked the "Account Assignment" box for transaction type AUM.
    Thanks and Regards
    Madhu Vutukuri

    HI,
    check SAPNET note 105024.
    Best regards, Christian

  • Transfer posting mov type 309

    Dear friends,
    Please help me in following scenario,
    In MIGO, I want to do transfer posting from one material to another .using mov. type 309.
    My problem is that, my destination material batch number is comming same as sender material batch number. I want system to automatically create new internal batch number for destination material.
    Please guide.
    Regards,
    Amit Shirsath

    Dear Madam,
    I have done the same using MB11, but i am not able to do the same with MIGO, and my clients requirement is to do with MIGO only..
    Regards,
    Amit Shirsath

  • Problem on mb1b with Movement type 309

    when I use the t-code mb1b to transfer posting with Movement type 309,the system give a hint 'Account 40000000 requires an assignment to a CO object'. I checked the configuration of omwb and obyc.It seems no problem.
    So can anyone tell me how to solve the problem? Thanks!

    Hi
    Alternative to the above solution will tell u which should work,it seems from the error that you need to put the Cost Center or G/L account. But if you don't want
    the system to ask you everytime you do the goods transfer, you have to setup
    your Cost Element / CO object. Go to transaction KA02 and put the
    appropriate CO or Cost Element (when the system gave you the warning,
    normally it gives you the CO object that need account assignment) and
    assign the Default Acc.Assigment to the CO/Cost Element.
    But before you do that, I suggest you to contact your FICO people.
    Good luck
    Regards,
    Susi

  • Material to Material Transfer using Movement Type 309

    Hi,
    We have activated the material ledger.
    Issues:
    When we transfer material A to Material B using Movement Type 309 the price difference from Material A was not allocated to Material B after executing CKMLCP.
    But the another company who using the materail to material transfer, the price difference was allocated to receiving material.

    Hi,
    Please check SAP Note 167722 to able to do multi-level price determination for material transfer with using modification.
    best regards, Takashi

  • Costing implications with movement type 309

    Hi all,
    Is there any costing implications with movement type 309-material to material transfer within the plant.
    Thanks in advance.

    Jyotishman,
    The cost complication exists if there is price difference between the original material and the converted material. This is a highly risky movement type
    Example:
    Material A costs $100  - Quantity : 10 - Inventory cost = $1000
    Material B costs $1000 - Quantity: 10 - Inventory cost = $10000
    Total Inventory cost: $11000
    If material A 10 qty is converted to Material B then,
    Material B costs $1000 - Quantity: 20 - Inventory cost = $20000
    Total Inventory cost: $20000($9000 increase in value)
    If material B 10 qty is converted to Material A then,
    Material A costs $100 - Quantity: 20 - Inventory cost = $2000
    Total Inventory cost: $2000($9000 reduction value)
    In Indian scenario - This movement type will be monitored by the audit team so generally access to this movement type is highly restricted.
    Regards,
    Prasobh

  • Finish good material not showed with 131 movement type in mfbf code in REM

    Hi experts,
    I am working in Repetitive manufacturing process, I have 6 operations in rate routing from which 6th operation is mile stone.
    When i confirm last operation through MFBF, system shows components list with movement type 261 but finish material is not showing with movement type 131. The document no. is generated at the time of saving but in displayed document FG shows with 131mov. type and component list with 261.
    Setting for REM are as follows
    1. control key- pp03
    2. production versions- maintained with standard REM profile
    So my question is how can i see FG material in MFBF screen along with componets list ? What is the settings for this or any development is there ?
    Regards,
    Nitin Nerkar

    Nitin,
    System behavior is not wrong. What i understand from  Backflush is, Back flushing is nothing but automatic goods issue. System will automatically posts the goods issue when you confirm the operations.You have no need to make manual issue. It will reduce the effort.
    Backflushing is automatic accounting (Goods issues - 261 mvt) of material consumed for production, at the time of confirmation.
    When you use auto goods receipt indicator then at the time of confirmation system will do auto GR. In normal discrete mfg scenario, when you are doing confirmation when you click on GOOD MOVEMENT tab you will get GI as well as GR with movement type.
    But in REM scenario you doing MFBF (REM Backflush) means This activity executes multiple activities in a single step, such as: finished product goods receipt, backflush of component materials, posting of costs to cost collector and creation of material and accounting documents. When you are doing MFBF and clicking on post with correction tab it will show you what are the components going to backflush, and that is ok. Here you are not going GOODS MOVEMENT tab to display GR.
    I think this SAP system std behavior.
    Tara

  • GL A/C for movement type 309

    How to find GL account (tcode..) for movement type 309

    The way to check the G/L accounts getting hit is to check the material document's FI document. To look for this document, use TCode MB51 with search selection as movement type 309 and execute, it will bring up all material documents created with this movement, double click on any material document No. will take you to display material document, there in header under DOC INFO tab, you will see FI document button click on that, and you can see the G/Ls and the accounting entry getting generated for the said movement.
    Sometimes you will not see any FI document generated for movement 309. The reason is when doing variant adjustment of same price, no accounting document is generated as the prices are same. If the prices are different accounting document is generated.
    Edited by: Afshad Irani on Apr 14, 2010 5:16 PM

  • How to clear open posting change notices (Movt type 309)

    Hi,
    I want to clear the open PCN's created with mov type 309 (Posting change, general) being shown in LL01.
    All these posting change quantity are positive. I am not able to nullify them because there is no stock of those materials.
    Whenever I try to create a TO from LU04, the system is unable to take a storage type because of no stock.
    Whenever I try to change the PCN;s status to :U", the system says that the souce data and dest data is same (both sloc's are same).
    Please suggest an alternative to clear these PCN's.
    Thanks in advance.
    Regards
    Gaurav

    Hi,
    Pls check the below.
    -Any open transfer orders for the posting change notice exists,once they confirmed the PCN will be cleared.
    -Use LU02 to set a deletion status on the PCN.
    Posting change notices can be created for same sloc's but the stock category of the source and destination will be different i.e. unretstirced to quality, unrestriced to blocked etc ....
    Hope this helps you.
    Rgds,
    Kris.

Maybe you are looking for

  • UI Issue in Column View

    In column view, I often find that I need to expand the column view to read the file names. I do know the nice little trick to double click the vertical bars at the BOTTOM of the column to auto-expand the view. On a large monitor this maneuver becomes

  • What we need creation of new movement type ? when will be used?

    Dear guru, pls clarity

  • Unable to syn - no space ... but there should be

    Hi, I went to sync this morning and it said not enough space available. It said it needed 7GB and only 500MB free. When I checked my iPhone I noticed that it only had about 4 podcasts (video) on there, but it must think they are all still on there us

  • LiveCycle Form Timer Example Needed

    Does anyone have a LiveCycle form count up timer example they can share? The timer needs to have a start and stop buton and a reset/clear button. I have seen an example in an Acrobat form but do not know how to create one in LiveCycle. Thank you

  • TREX initial Indexing

    Hi, I am trying to index about 12mio datasets. I changed the queue parameters according to a PerformanceHowTo: Parameter Schedule Type: Count Schedule Max Documents: 100000 Index Bulk Size: 50000 Optimize Bulk Size: 400 Initial Indexing Mode: On From