Postings with Alternative Reconciliation Accounts with Customer Invoice

Hi Experts,
In customizing i have defined Alternative reconcillation account for a Reco Account of customer.
When i post 2 line items in customer invoice,it is picking recon account from customer master for 1st line item and alternative recon account for 2nd line item .
But it should pick Alternative Reco Account for both line items.
Kindly guide me which setting should be checked for this ?
Regards
Amit

Hi,
You defined alternative reconciliation account for customer but you still have some customizing points to check in addition for that.
Please check OV64 ( IMG -> Sales and Distribution -> Basic Function -> Account Assignment/Costing -> Reconciliation Account determination -> Assign GL Accounts )
And additionnally: IMG -> Sales and Distribution -> Basic Function -> Account Assignment/Costing -> Reconciliation Account determination -> Define Access Sequence
In OBXY transaction, you define alternative rec. accounts per special G/L indicatoris, for example in the case of A/R doubtful / bad debt , system will not pick up rec. account from customer ùmaster record, but the one defined in OBXY. This is for FI part
Hope this can help you
Regards
Tarek
Edited by: Tarek AYACHI on Oct 7, 2011 5:56 PM

Similar Messages

Alternative reconciliation account

Hi,
we have a following requirement from the client:
The business process is the following:
approx.10.000 Retail beer customers in dist. channel X and Y. We would like to invoice a so-called rent fee with sundry invoicing for the equipments they use. (In the future we will create other kind of sundry invoices for them too.) Depending on the category of the equipment we will invoice 3 different amounts per equipment.
These customers will issue towards us an invoice with the same amount as a marketing contribution.
Incoming and outgoing invoices have to be settled against each other. This is not a onetime action. We must repeat this process year by year.
Business process:
1.     Outgoing invoices have to be created for customers about the annual rent fee
2.             Mass creation of sales orders and invoices using LSMW.
3.     Customer issues an incoming invoice in the same value about marketing cost contribution ( with LSMW for FB01 transaction ).
4.     Outgoing and incoming invoices have to be settled (zero settlement)
4.     If customer doesnu2019t issues invoice, he has to be dunned
My questions are:
1) our client has asked to Make settings for u201CPosting with alternative reconciliation accountu201D: allow for G/L account ABC to post with alternative reconciliation account Nr. DEF.
we can not change the recon. account to alternative recon. account here, when the customer invoices are get created from VF01, so what is the purpose of alternative recon. account here ?
2) How to carry out Automatic Zero settlement of incoming and outgoing invoices using automatic payment program?
Thanks,
Vidya

Answer 1
=======
During document entry, you use the reconciliation account to define the G\L account in which the transaction figures are to be updated. You determine which G\L account is to be used using:
The special G\L indicator or
The reconciliation account which is defined in the master record (default) and, if relevant, any additional alternative reconciliation accounts which you can define per reconciliation account in Customizing
Define accordingly for customers and vendors
Answer 2
=======
The is no automatic scheduling of Payment Run in F110
However, you can schedule the proposals in F110S. Make you use of this.
Create a variant and schedule them in background.
Regards,
Ravi

Alternative reconciliation account in MIRO

We defined alternative reconciliation accounts in FI and in the FI transactions we can overwrite the normal reconciliation account with the defined alternative rec. account (also using the short key).
Now we would like to use this feature also from out MIRO, but the field is not open.
Is it possibe to open the reconciliation account for the vendor in transaction MIRO?

Hi Kuntal,
you can define per reconciliation account 1 - n alternative reconciliation accounts.
(SPRO: Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Postings with Alternative Reconciliation Account - Define Alternative Reconciliation Accounts.)
Only those defined accounts can be used for customers / vendors with this default rec.account.
The master data of all reconciliation accounts must be similiar and marked in field
KNB1-XMITK for "Reconcil.acct ready for input" (FS00 Create/Bank/Interest), both the default and the alternative rec.accounts.
There is no programming to do.
Coming from SD there is a special menu in customizing to assign alternative
rec.accounts:
Sales and Distribution - Basic Functions - Account Assignment/Costing - Reconciliation Account Determination
Prerequisite is the FI definition as described above for FI.
Then you have to define a determination procedure ex. KOFIAB with a account determination ex. KOAB.
The procedure has to be assigned to the billing types you want to work on.
Further you need a decision table and rules to assign finally the reconciliation accounts for the determination (KOAB) and the rules given.
Hope I could help you.
Kind regards,
Theresia

Define Alternative Reconciliation Accounts

Dear All,
What is the use of ID field, when we are assigning GL account with Alternative GL account.
IMG Path: SPRO --> Financial Accounting (New) --> Accounts Receivable and Accounts Payable --> Business Transactions --> Postings with Alternative Reconciliation Account --> Define Alternative Reconciliation Accounts.
i repeat my question what is the use of ID field

Hi Ranjit:
First of all, this setting requires GL account (reconciliation account) should be ready for input. You can check that in the GL master (and if that is suppress, you can open that field in the account group definition).
Then, when you maintain the ID in the alternate reconciliation account, it is a short cut key to use for the alternate account during document entry. So at the time of document entry, instead of entering the alternate reconcilation account, you can enter this ID and system would bring the account number. And for this to work, ID should be uniquely assigned to a combination of reconcilation and alternate reconciliation account.
So , basically ID is short cut key (for alternate reconciliation account) during document entry.
Hope this helps.
Thanks.
Rahul

Postings to G/L accounts with open item management are not permitted in ASKB

Hi Gurus,
I have the error FAGL_POST_SERVICE012 'Postings to G/L accounts with open item management are not permitted' when i run the transaction ASKB. The very strange thing is that in table APERB_ITEMS for this company code there isn't any record. My questions are:
1. The ASKB posts only if the APERB_ITEMS is populated?
2. If yes, Why the ASKB wants to create postings on this company code?
3. If no, which are the logic conditions that include a asset in the ASKB execution?
4. If the logic is correct, how i can to run the ASKB on OI accounts?
Thanks in advance,
Best Regards,
Emanuele

Hi ,
I believe you know why do you run transaction code ASKB if not please see below
The report evaluates all asset transactions since the last run. Unlike the periodic depreciation posting program, the APC posting run is not tied to a certain accounting period. It generates one document per posting period and depreciation area. That means that asset values are summarized for various account groups in one document. Document number assignment is external. You have to enter the document type in Customizing for Asset Accounting.
There are various possible ways of posting APC values:
To an account set within the original company code
To an account set of an alternative company code
To an account set directly in a special ledger
The account set can be determined from a different depreciation area.
Derived depreciation areas can be treated as real depreciation areas. This means that the system posts APC differences rather than special reserves, as was the case up to now.
During a test run, the system completes all accounting checks (for example, budgetary control of objects belonging to Funds Management).
While doing above system reads and update table APERB_ITEMS . If you look to Program for ASKB is RAPERB2000 and if you take your ABAper help to under the coding he will tell you that is program use APERB_ITEMS to update and read.
MANY THANKS
REGARDS
Preeti Agarwal

Postings to G/L accounts with open item management are not permitted Messag

HI All,
Me activiated New GL. and when I am trying to post the
document, I am getting the below error.
The GL used 200100 is Cash A/c (40)
Cr Eq Share Capital A/c (50)
As Cash A/c requires Clearing, I have activated "Open Item Management".
Can you advice me why Its giving me the below mentioned error.
Thanks
Postings to G/L accounts with open item management are not permitted
Message no. FAGL_POST_SERVICE012
Diagnosis
You use G/L account 200100 in company code RLIF with open item
management. However, postings are not permitted to G/L accounts in
individual ledgers with open item management.
Procedure
If you have not yet made any postings to this account and if the
account is to be used for closing processes in non-leading ledgers,
deactivate the Open Item Management indicator in the company code data
for the G/L account.
Thanks,
Niranjan Yandamuri

Hi,
Please, refer to note 1646466 for the info on this message.
Regards,
Eli

FB50L error: Postings to G/L accounts with open item management are not permitted

Dear All
I need your help.
I am trying to do some adjustment to GR/IR clearing account in Non-leading ledger. Since for this account open item management is ticked, I am getting an error message 'Postings to G/L accounts with open item management are not permitted'.
Now I have checked the forum to find some solution...but does not fit my requirement.
I cannot create a new account. I cannot change the existing account. I tried OBA5, but the message persists.
I also checked the notes.
Appreciate a response on how the post to open item managed accounts in non-leading ledger.
Regards
Kunaal

Hi Kunaal
Usually, OIM accounts are not allowed for Non Leading Ledger postings... With EhP4 or 5, i guess, a new feature is added in GL Master whereby you can specify that a GL will be OIM for Leading Ledger and Not OIM for a Non Leading Ledger
Regards
Kavita Agarwal

ASKBN - Postings to G/L accounts with open item management are not permitte

Hi All!
I have a problem: I run the transaction ASKBN (periodic asset postings) and receive the message about error: "Postings to G/L accounts with open item management are not permitted".
Please let me know how correctly run the transaction?
Thank.

Hi,
if you would have posted this information with your opening post, it would have been more helpful. How should the community know this detail?
Regards,
Markus

Define alternative reconciliation account in MIRO

hI
It's possible to define alternative reconciliation accounts for vendors/ customers in MIRO (Invoice verification).
Or
Any form to do FB60 with reference to P.O
Thanks in advance
Regards

Hi,
Reconciliation account is defined per Vendor/Customer. It is standard that you can not post directly to reconciliation account, and this is for security purposes. I suggest that you change the reconciliation account of your Vendor/Customer before transacting in MIRO or FB60 so amounts will be posted to their proper accounts. Please use Transaction XK02/XD02, for changing reconciliation accounts.
Hope this helps.
Thank you,
Mik

Alternative Reconciliation Account for Customers

Dear all,
I have to define Alternative Reconciliation Account for Customers but I don't understood relationship between Reconciliation Account for Customers and Special GL account.
Please give a detail example about business scenanio that use these account.
Thanks so much
Minhtb

Hi,
Normally a ledger of any party will have two balances
- Normal balances-
- Balances with Special GL Postings
Items like Down Payment request, Down Payments, Security Deposits etc., are treated as special GL Postings for ease of understandability.
However a link has to be maintained between recon accounts (for the party) and the SP GL Indicator.
Hence we assign an alternative recon account also for the main recon account for sp GL postings
Cheers
Points Please!

MIRO and alternative reconciliation account?

Hi all,
is it possible to have the possibility to post to an alternative reconciliation account of a vendor when posting in MIRO? I know that in FI when I set in spro an alternative reconciliation account for some account and then mark that this account is ready for input I can choose, when posting a vendor invoice for example, a different reconciliation account. In MIRO this field is grey and I can not input anything (change it). Does anyone have any idea about that?
Thanks a lot!
D.

Hi ,
Check this tcode - OBF4 or try with OLMRLIST . In OLMRLIST you have to define screen variants there u try enabling the GL field .
Check this out . Though I haven't check this ....
Update us if it helps .
Thanks
Dipak

MIRO and change Alternative Reconciliation Account

Hi Experts:
I'm trying to change the account on MIRO Tx. wich a Alternative Reconciliation account. I was testing LMR1M001 User Exit but It didn't work.
Do you know any way that it can work?
Thanks in advance.

Hi ,
Check this tcode - OBF4 or try with OLMRLIST . In OLMRLIST you have to define screen variants there u try enabling the GL field .
Check this out . Though I haven't check this ....
Update us if it helps .
Thanks
Dipak

Reconciliation account for customer

Hi Experts,
While creating customer in customer master ,the system asks for " Reconciliation account".Can anyone explain how to create " Reconciliation account" for customer?
Regards,
Randhir

Hi Randhir,
Use Tcode FS00 to create a reconciliation account, just as you create a normal GL account.
Reconciliation account is a balance sheet account.
Under the Control Data tab Update the field Recon.account for acct type with customers.
Use this Reconciliation account in Customer master data..
Hope this helps you..
Regards,
Praisty

Change of Reconciliation account for Customer/Vendor.

Dear All,
I need to change the reconciliation account for customer, after changing recon account i want the balance from the old recon account to be transfered to new recon accont.
Please suggest.
Thanks & Regards

Hello,
Once you made any change of reconciliation account in customer master, you are required to execute F.5D.
Please read the documentation available on this.
This will adjust the postings made to old reconciliation account to new reconciliation.
Hopefully, it should solve your problem.
Thanks,
Ravi

Alternative reconciliation account and special GL indicators

Hello,
A tricky one. Your help would be very appreciated !!!
We are facing a problem when using special gl indicators for the clearing of vendor postings that did use an alternative reconciliation account. We face it during a bill of exchange posting. The posting is cleared but the target account determined by the SGI is not the correct one. It is as if the SGI target account was not determined based on the reconciliation account maintained in the vendor posting, but by the reconciliation account maintained in the vendor master data.
In order to be clear:
In table THKON (alternative rec account) we have:
account A >> account B
In table T074 (special GL) we have:
account A >> account C
account B >> account D
The idea is simple: we can have different reconciliation accounts in the vendor posting (A & B) and for the SGI we want to have also different target accounts (C and D).
Our vendor posting use the alt rec account, so account B is used in the posting while account A is maintained in the master data. We trigger our Bill of exchange posting using special GL indicator; the posting on account B is cleared but the target account to which the amount is moved is C while it should be D.
To me this is a major problem and completely annihilates the use of alternative reconciliation account, as the initial distinction cannot be maintained all the way.
Did anyone already face this issue ? Is there an OSS note on this issue ?
Thank you very much for your answer.

Dude,
i suspect meanwhile logde a OSS message to SAP.
Alternatively, try to use substitution ( i know as per your config system should work) but try substitution, if possible.
<b><u>OR</u></b>
Configure these SPL GL accounts also in Alternative Recon config against each other

Postings with Alternative Reconciliation Accounts with Customer Invoice

Similar Messages

Maybe you are looking for