Postoffice-startup-file not copied from SYS-volume
We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server to a
SLES10-SP1-server with the Novell GroupWise Migration Utility.
When we started gwpoa the postoffice-startup-file was not
in /opt/novell/groupwise/agenst/share/
We looked in the migration-logfile and we saw these messages
10/27/07 02:32:23 Configuring agent(s)...
10/27/07 02:32:23 Running remote command:
sh /tmp/groupwise/software/addagent.sh -
b /opt/novell/groupwise/agents/bin/gwpoa -
s /tmp/groupwise/software/p006.poa -h /var/opt/novell/groupwise/mail/p006 -
v 7
/tmp/groupwise/software/addagent.sh: line
135: /tmp/groupwise/software/p006.poa: No such file or directory
mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
directory
cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
or directory
10/27/07 02:32:25 Remote command failed (1)
This is were our sourcefiles were:
Post Office:
Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
Destination path: /var/opt/novell/groupwise/mail/p006
Agents:
Post Office Agent:
Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
As you see, our startup-file was on another volume then the postoffice.
In the migration-log we only saw a mount of the postoffice-volume, so we
think there is a bug in the migration utility. It does not copy the
startup-file if it is on another volume (in this case on the SYS-volume).
Or did we something wrong?
At last we solved our problem by copying (and editing) a startup-file
to /opt/novell/groupwise/agenst/share/
Regards,
Jeroen van der Klaauw
It happens between the full dbcopy and the incremental dbcopy, when the
agent is configured.
Jeroen van der Klaauw
> When the migration agent finishes the migration of the data there are
> the second and third phases that the application runs through - 2) to
> install the agents and 3) configure them. If you bombed out before
> that third phase then I would understand...
>
>
>
> On Mon, 29 Oct 2007 15:55:53 GMT, [email protected] wrote:
>
> >We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server
to a
> >SLES10-SP1-server with the Novell GroupWise Migration Utility.
> >When we started gwpoa the postoffice-startup-file was not
> >in /opt/novell/groupwise/agenst/share/
> >We looked in the migration-logfile and we saw these messages
> >
> >10/27/07 02:32:23 Configuring agent(s)...
> >10/27/07 02:32:23 Running remote command:
> >sh /tmp/groupwise/software/addagent.sh -
> >b /opt/novell/groupwise/agents/bin/gwpoa -
> >s /tmp/groupwise/software/p006.poa -
h /var/opt/novell/groupwise/mail/p006 -
> >v 7
> > /tmp/groupwise/software/addagent.sh: line
> >135: /tmp/groupwise/software/p006.poa: No such file or directory
> > mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
> >directory
> > cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
> >or directory
> >10/27/07 02:32:25 Remote command failed (1)
> >
> >This is were our sourcefiles were:
> >
> >Post Office:
> > Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
> > Destination path: /var/opt/novell/groupwise/mail/p006
> >
> >Agents:
> > Post Office Agent:
> > Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
> >
> >As you see, our startup-file was on another volume then the postoffice.
> >In the migration-log we only saw a mount of the postoffice-volume, so
we
> >think there is a bug in the migration utility. It does not copy the
> >startup-file if it is on another volume (in this case on the SYS-
volume).
> >Or did we something wrong?
> >
> >
> >At last we solved our problem by copying (and editing) a startup-file
> >to /opt/novell/groupwise/agenst/share/
> >
> >Regards,
> >
> >Jeroen van der Klaauw
> Tim
> ___________________
> Tim Heywood (SYSOP)
> NDS8
> Scotland
> (God's Country)
> www.nds8.co.uk
> ___________________
>
> In theory, practice and theory are the same
> In Practice, they are different
Similar Messages
-
How to open files (NOT copy) from external hard drive
Hello there,
I have a Western Digital My Passport external harddrive. I bought the hard drive so I could take stuff like my music off my laptop harddrive, free up space and make it run smoother.
Problem is, every time I select a music file on the ex harddrive to play in itunes, the file is copied to the laptop harddrive! Completely defeats the purpose.
Does anyone know how to stop my laptop from copying music files and just get it to play files from the external hard drive? I have looked and looked but to no avail - this is my first Mac and it is the one issue that really bugs me.
Any help will be much appreciated!
N.B. it doesn't seem to do this with other file types (documents etc.) just music files/files supported by itunes.How are you selecting the music files? I have my entire music library on an external drive. If you go to preferences in iTunes, their is an option to select where your music library resides. I think it is under advance but I'm not sure since I don't have access to my mac.
Glor -
My computer was stolen with all my iTunes on it. However, my iPod was not stolen. How do I transfer all files from my iPod to my new computer (purchased files and files I copied from CDs)?
http://www.wideanglesoftware.com/touchcopy/index.php
-
Photoshop Elements 9 won't open blank files or copy from clipboard
PE9 for Macwon't open blank files or "copy from clipboard." I get error messages that say, "Could not complete the command because of a problem using the Adobe color engine," when I try to create a new blank file, and "Could not place because of a program error" when trying to "copy from clipboard." I tried reinstalling the software, but that didn't help.
Are you still facing the same problem ?
can you try it after resetting your preferences.
To reset your preferences at the time of launching PSE press command+option+shift key combination untill following pop up comes.
Addi -
Letter of Credit not copying from Quotation to Sales order
Hello,
I have attached a LC to a Quotation. When i am making an order with reference to the Quotation, the LC is not copying from Quotation to the Sales order. Kindly help.
Regards,
ShahzadHi,
Did you want to say that you have maintain some text in quotation and that text is not copying to the sales order some thing like that?
So I suggest you to check your setting by going to the following Tcodes.
VOTXN over there you can define the text types.
And you have to assign you text determination procedure to the order also.
If you want that text to be copied to the billing also then assign the procedure to the billing doc.
If you have assigned properly your procedure then it will copy the document.
Regards
Raj. -
Item 000002 is not copied from the reference document
Dear All,
I am facing a typical problem while creating Price difference sales order w.r.t. invoice.
Document types in the system are -
Z2FC - Normal Sales order type, ZPD - Price change order type, Z2FB - Normal invoice type
My item category determination is -
Doc. type - Itm cat. gp. - Usage - Hghr itm cat - Default itm cat. - Manual itm. cat.
ZPD - NORM - blank - blank - G2N - L2N
ZPD - NORM - blank - G2N - G2N - L2N
Z2FC - NORM - blank - Blank - TAN - TAP
Z2FC - NORM - blank - TAN - TANN - TAN
Copy control is -
Z2FB to ZPD for item category TAN with proposed item categories are G2N and L2N.
Z2FB to ZPD for item category TANN u2013 requirement 302 [Do not copy item]
During my Z2FC sales order creation I was having line items as follows
Item no. - Mat. code - Qty - Higher level item - Item category - Amount
10 - 101329 - 3 - blank - TAN - 35,000.00
20 - MC091234 - 3 - 10 - TANN - 0
30 - MC091234 - 1 - 10 - TAN - 5000
We are not using the sales BOM. I need to provide line 20 free to the customer. Hence I have manually maintained 10 in the higher level item column for the line item 20. The item category determined was TAN. Then I had changed it to TANN manually. So the amount became zero. Line 20 became the child and line 10 became parent.
At the same time customer also wishes to buy the material code MC091234. Now the material code MC091234 is of HALB type where as the material code 101329 is of FERT type. There is validation in the system that only FERT type of material could be sold and HALB type of material could be supplied as free. [With item category TANN]. In case HALB type material is also required to be sold then I need to manually maintained value in the higher level item. So I had maintained the value 10 in the higher level item column for the line item 30. The default item category determined is TAN. The invoice is also created properly. [Z2FB type]
But when I am creating the invoice correction document type ZPD w.r.t. Z2FB type invoice, I am able to get the two line items for the material code 101329 in line item 10. One each for G2N and L2N item category.
But for the material code MC091234 in line item 30, I get only one line item with item category G2N. I did not get another line item for the material code MC091234 for the corresponding L2N type item category
At the same time following messages are displayed
Message no. V1475 Item category for item 000002 cannot be determined and
Message no. V1476 Item 000002 is not copied from the reference document
Please help.
Thanks in advance
Piyush RanpuraDear All,
Any help???
Yet my issue is unresolved.
Thanks & Regards
Piyush Ranpura -
" VL 476: Item 'Official Doc. Number' is not copied from the reference doc"
Hi Guys,
When I am doing the Accrual Reversal in F.81 I am getting the following error
" VL 476: Item 'Official Doc. Number' is not copied from the reference document ".
I have maintained the number ranges also. I am not able to understand why the system is issuing this error.
Pls suggest.
Thanks
SrikanthHi Guys,
Can anyone please help on this error.
Thanks
Srikanth -
i try to transfer mp3 files; not purchased from itunes, from my ipod nano to my new laptop/itunes/itouch. i dont have the original files/cd;s anymore and no backup! can somebody help please
http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
-
Text is not copied from Customer masterdata to sales document header
Hi Friends,
Text was maintained in customer masterdata, that should be copied in to sales order header. In Quality server its working as per requirement. But in production its not copied from customer master data.
Same configuration settings are in production as well as quality(VOTXN)
Please suggest me regarding thisHi Durga,
Please go to SD> Basic function > text control> Define and Assign Text Determination Procedures and in that screen, check the customer sales and distribution change view customer sales text and sales note for customer and its assignment .
I hope these will be helpful for you.
Regards, -
I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.
I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait. -
Discount pricing is not copied from Qoutation to Sales order.
Hi All,
Issue:
Discount pricing is not copied from Qoutation to Sales order.
Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
Points will be rewarded.
Regards,
neslin.kindly check in the price determination whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?
-
PO number not copied from Contract to Sales order
Hi Gurus,
when i try to create a sales order w.r.t a contract the Po number is not copying from cintract to sales order.
also the PO item is not copying from contract to sales orde.
Could u tell me the reason.
Cheers,
SumithHi Sumith,
I'm not sure though but try this one this might jus help.
Go to VTAA,
select the target & Source doc type.
Go to header and check the COMPLETE REFERENCE CHECK BOX,
Which says it copies the whole of the reference doc from the
source doc to the target doc.
I jus hope this will sole your problem.
Cheers!!
Nitin -
Pricing not copied from qoutation to Sales Order.
Hi All,
Issue:
Discount pricing is not copied from Qoutation to Sales order.
Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
Points will be rewarded.
Regards,
neslin.kindly check in the price determination whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?
-
Price not copying from contract to maintenance order in IW31
Hi Gurus,
I am facing issue in one of the client where Price is not copying from contract to maintenance order in IW31. But while doing the same in another client it is working fine.
I did not find the settings for this change. Can any one please help me for which settings price is not copying to IW31 transaction?
Thanks in advance!
Best regards,
Karun Kumarhi
i think if you have assinged the contract the servies will not copied ,for this in the external tab select the serice selectionbutton ,here specify the agreement from their select the serives you required
regards
thyagarajan -
Unloading point is not copied from PR -PO,when i change account assignment
Hi All,
unloading point is not copied from PR -PO,when i change account assignment from 'K' to 'F' in PO. unloading point field should be in display for both 'K' & 'F' Account assignment category in SPRO because we r using this field to acknowledge my thirty party planning system.
Thanks in advance
Vengal RaoHave a look at SAP note <a href="https://service.sap.com/sap/support/notes/734273">734273</a>
Maybe you are looking for
-
The battery drain issue is really bad for my phone and I thought I would finally get round to downloading the new software...but now I can't. It says it's up to date when I know it's not. I tried re-downloading iTunes but that didn't work, and of cou
-
iTunes 7.1 does not have a scroll down bar showing the different artists in my library - is it hidden somewhere or has some misguided designer done away with this most useful feature of the old iTunes? Ian.
-
How to make a group contacts for iphone 4s, How to make a group contacts for iphone 4s
How to make a group contacts for iphone 4s
-
Hello, Iam working with scripts, I have to give totals for my line items.i have to write a code in my form painter. See if there is one item then one total price value is displaying,if there is 2 or 3 means then also the total price values are coming
-
Adding item in multiple folders
Hello, we are using 3.0.9 portal version content areas. When a item is added, it should be posted or created in two folders. Is it possible? if so Can you explain how? Thanks Sha