Postpone/Snooze updates on User Machines - ConfigMgr 2012 R2

I am aware that there is no postpone option available for Users when Software updates are pushed to client machines.
However I did some changes in client setting under Client restart and policy. After updates deployments I am getting below snooze option but not sure which changes has enabled this.
I do want this option to appear for users and no system reboot unless they themselves do but keep them reminding with snooze option. Can someone help with steps on this if this is really supported and configurable.
Thanks

These are the easly configurable options in CM12 http://gerryhampsoncm.blogspot.in/2013/07/configmgr-2012-sccm-2012-sp1-step-by_16.html
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Similar Messages

Failed to resume task sequence / ConfigMgr 2012 SP1 vs. R2

We have two configMgr environment at customers place. A Lab Environment and production Environment. Till July 2014 both environment were at the same Version level (ConfigMgr 2012 SP1).
We create the WIM-Image in LAB to use this WIM in the production. There were no problems till yet. Some months before we updated our
LAB to ConfigMgr 2012 R2 CU2. The Production is still
ConfigMgr 2012 SP1 CU3. Now if we create a new image in our LAB we can't use this Image in Production.
OSD ends after 'Setup Windows and ConfigMgr' step. There is an error:
Can't we use an captured Image from a ConfigMgr 2012 R2 environment in a ConfigMgr 2012 SP1 environment?

I am not 100% if this is really supported (even if the versions were equal). I've seen situations where you can still see references to the MP and sitecode of the test environment when having a close look at the logs (although it did not cause real issues).
Torsten Meringer | http://www.mssccmfaq.de

Managing software updates with ConfigMgr 2012 R2

I really dont understand the ConfigMgr software update functionality yet. It feels a little confusing eith lot's of different options etc. What I'm trying to get is that I have ADR rule that does all the patching automatically.
With ADR I want to deploy all available updates to pilot machines every month after MS patch tuesday. One week after that all the patches are deployed to production machines too.
Help would be greatly appreciated

Adding more info here.
ConfigMgr 2012 Automatic Deployment Rules
http://blogs.technet.com/b/configmgrdogs/archive/2012/05/08/configmgr-2012-automatic-deployment-rules.aspx
Juke Chou
TechNet Community Support

SCEP 2012 Definition Updates for Linux machines thru SCCM

We have a situation where SCEP definition needs to be updated on Linux machines which don't have access to internet.
All I have read is that SCEP functions as stand alone for Linux & Mac machines. Can someone guide thru how do SCEP definitions get updated on Linux machines that are not connected to internet.

Pls check the below link
http://www.niallbrady.com/2013/02/22/how-can-i-deploy-system-center-2012-endpoint-protection-definition-updates-from-a-unc-file-shares/
Thanks, Prabha G

WebDAV error when doing a client push ConfigMgr 2012 R2

Hi everyone, I am getting an error message when doing a client push, only on some DPs.
Here is the setup:
ConfigMgr 2012 R2 on Server 2012 R2.
DP are on Server 2008 R2 (for the most part).
DP are installed using the exact same way, adding the Primary Site Server to the local Admins group, then using the console to install the role, selecting BranchCache and Configure IIS.
No PXE.
Boundary groups are configured as appropriate.
When initiating a client push the following errors are displayed in the CCMSetup.log:
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
Failed to check url http://DPServerName.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005
Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
GET 'HTTP://MPServerName.com/CCM_Client/ccmsetup.cab'
The installation is done but yet again, no local DP are used.
The same scenario is actually working on other DP that was configured using the same exact way.
Servers where not new installation and where used for other things:
MDT Deployment Share with PXE.
Other share.
As far as I can tell, IIS is well configured as I am able to deploy any other software on clients and they are using the local DP. Only the client installation is causing problem.
Anyone have any idea?
There is a lot of post about a similar problem on ConfigMgr 2007 but all solution are to configure WebDAV, which is not configured in ConfigMgr 2012.
Thank you guys for any tip and/or help!
Mathieu

You are right about the log, here is a longer snippet of it:
==========[ ccmsetup started in process 5980 ]========== ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Running on platform X86 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
Launch from folder C:\Windows\ccmsetup\ ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
CcmSetup version: 5.0.7958.1501 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
In ServiceMain ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Running on 'Microsoft Windows 7 Professionnel ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
SslState value: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPPORT: 80 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSPORT: 443 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSSTATE: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMHTTPSCERTNAME: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
FSP: ServerSCCMPSS.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
CCMFIRSTCERT: 1 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Retry time: 10 minute(s) ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MSI properties: INSTALL="ALL" SMSSITECODE="S01" FSP="ServerSCCMPSS.Test.com" SMSCACHEFLAGS="PERCENTFREEDISKSPACE" SMSCACHESIZE="20" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Source List: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmmp.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\Serversccmpss.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\dcsspsccmmpdff.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMMP.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\ServerSCCMPSS.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
\\DCSSPSCCMMPDFF.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
MPs: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmmp.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Serversccmpss.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
dcsspsccmmpdff.test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
No version of the client is currently detected. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Updated security on object C:\Windows\ccmsetup\. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Sending Fallback Status Point message to 'ServerSCCMPSS.Test.com', STATEID='100'. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Failed to get client version for sending messages to FSP. Error 0x8004100e ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Params to send FSP message '5.0.7958.1501 Deployment ' ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
State message with TopicType 800 and TopicId {40FD8A62-3E9A-41FB-8698-E9A6658A4A91} has been sent to the FSP FSPStateMessage 2015-03-25 23:12:12 4536 (0x11B8)
Running as user "Système" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Detected 206206 MB free disk space on system drive. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Checking Write Filter Status. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
This is not a supported write filter device. We are not in a write filter maintenance mode. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=S01))' ccmsetup 2015-03-25 23:12:13 4536 (0x11B8)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>S01</RootSiteCode><CCM> <CommandLine>SMSSITECODE=S01 FSP=Serversccmpss.Test.com SMSCACHEFLAGS=PERCENTFREEDISKSPACE SMSCACHESIZE=20</CommandLine> </CCM><FSP> <FSPServer>Serversccmpss.Test.com</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="Test.com" /><Forest Value="Test.com" /></ClientOperationalSettings>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmpss.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmpss.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'Serversccmmp.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'Serversccmmp.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
The MP name retrieved is 'dcsspsccmmpdff.test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
MP 'dcsspsccmmpdff.test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrieved 3 MP records from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Retrived site version '5.00.7958.1000' from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteCode: S01 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
SiteVersion: 5.00.7958.1000 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for a valid online MP... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Checking the URL 'HTTP://Serversccmpss.Test.com:80/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'HTTP://Serversccmpss.Test.com:80/CCM_Client' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found a valid online MP 'Serversccmpss.Test.com'. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Searching for DP locations from MP(s)... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Current AD site of machine is CDL LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Local Machine is joined to an AD domain LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Current AD forest name is Test.com, domain name is Test.com LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Begin checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Finished checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Adapter {72FC011A-9993-4CBD-B7B2-D1D56FD38711} is DHCP enabled. Checking quarantine status. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="S01"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="CDL"/>
<Forest Name="Test.com"/>
<Domain Name="Test.com"/>
<IPAddresses>
<IPAddress SubnetAddress="172.16.64.0" Address="172.16.65.9"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Sending message header '<Msg SchemaVersion="1.1"><ID>{B9F091E1-649D-47C4-A0AD-19508435F962}</ID><SourceHost>C006235</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:C006235:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>Serversccmpss.Test.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="1080"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
CCM_POST 'HTTP://Serversccmpss.Test.com/ccm_system/request' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received header '<Msg SchemaVersion="1.1">
<ID>{336667CB-2AF5-4B7D-9B1B-3B9A39777034}</ID>
<SourceID>GUID:8BB44537-8D62-4751-9114-1F5527EE800F</SourceID>
<SourceHost>ServerSCCMPSS</SourceHost>
<TargetAddress>direct:C006235:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<ReplyCapabilities><AllowRegistrationReset>direct:ServerSCCMPSS:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>C006235</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="2574"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">ServerSCCMPSS;Serversccmpss.Test.com;</Property><Property Name="MPSiteCode">S01</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003" Signature="http://CDLGHOST.Test.com/SMS_DP_SMSSIG$/S0100003"/><ADSite Name="CDL"/><IPSubnets><IPSubnet Address="172.16.64.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>CDLGHOST.Test.com</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL"/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="S0100003" FullPackageVersion="7" FullPackageHash="CE8C259380667F5687A01FA5365B2D2D1236BA9FC1AD4696A54D914B919D294D" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30416572;2153570688" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Found local location 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Discovered 1 local DP locations. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
Got 401 challenge Retrying with Windows Auth... ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Failed to check url http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005 ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
GET 'HTTP://Serversccmpss.Test.com/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Successfully loaded ccmsetup manifest file. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1501' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vcredist_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vcredist_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/vc50727_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'x64/vc50727_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
Item
I did double checked with a friend about my configuration and everything, just to make sure, and everything seems to be right.
As for the use of account used to get the client, a domain join computer will not need to us the network access account if the DP is in the same domain and the same exact config on other servers is working like a charm deploying the client, same
security and configuration.
All default IIS security and share permission.
Thank you guys for your suggestion and help.
Mat

Update error of SQL Server 2012 enterprise running on Windows server 2008 standard SP2 (32 bits)

Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: ‎2/‎12/‎2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: ‎2/‎12/‎2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipe

Hi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support

Powershell 4.0 How to use Add-Printer to add printer for all users (machine)

Is there a way I can use Powershell 4.0 Add-Printer cmdlet to add a printer for all users (machine)? I tried from an admin account but it only adds a printer for the currently logged on user.
thanks.

Adding a printer for all users requires having access to their profiles (and registry hive for user) to save the mapped printer information. Your best bet is to either use Group Policy Preferences or write a user logon script that ones when they log in and
maps the printer if not already mapped.
Group Policy Preferences Example
I wrote an article a while back that shows how to use a GPO logon script to map a printer. It doesn't use V4, but the process would be the same as far as a GPO goes.
http://learn-powershell.net/2012/11/15/use-powershell-logon-script-to-update-printer-mappings/
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

Novell GINA removed after R2 upgrade to ConfigMgr 2012 SP1 client

I am working with a customer and we just noticed an issue when upgrading some of their SCCM 2012 SP1 clients to R2. After the upgrade, everything appears to work fine, but as soon as a restart happens, the Novell GINA is replaced by the Windows GINA.
These machines were running Windows XP SP3 with Novell Client 4.91 SP5. This did not occur when installing the ConfigMgr 2012 SP1 client originally, but appears to happen every time when the ConfigMgr client is upgraded to R2. I wouldn't have
thought the ConfigMgr 2012 R2 client upgrade would have anything to do with the GINA, but we can replicate the issue.
It's not due to Windows Updates getting installed in the background while the client is temporarily unmanaged, which was my initial thought. We ensured the policy to disable Windows Updates was correctly in place and that no updates were installed.
The only fix so far is to completely remove the Novell client and reinstall it.
Has anyone else run in to this?
Thanks!

Yes, I have seen this when we took over a group that had Novell. It was ConfigMgr 2007 at the time. We only had to keep Novell long enough to completely remove it later. So your process is correct.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

Removing App-V Applications when the User/Machine is no longer a member of part of an AD group

Hi All,
We currently use SCCM 2012 R2 Applications (not Packages) to deploy App-V application to users. We use AD Security Groups for users who are to receive the relevant App-V apps.
However what I am getting stuck on is the removal of the application when the user is no longer a member of the security group.
I have followed the details in the blog listed below, however I running into a major issue when testing:
http://blogs.technet.com/b/configmgrdogs/archive/2014/11/03/managing-app-v-deployments-in-configmgr-2012.aspx
Whilst for the main part it works, the main issue is that if another user of the same application logs into the original users' machine, the app gets pulled down again. When the original
user logs back in, although they will have no capability to launch the application (as no icons appear to be presented to the original user), the app will be back in the cache. No
good if a 3rd party licensing tool is producing licensing reports are based on the app existing within the client cache.
The point/question I am trying to get to.............. is it possible to have the uninstall application (not package) deployment re-run everytime the SCCM client polls so that re-installed applications via A N Other user are removed again based on the
above scenario?
Cheers
Andy

Andy,
Try out the following http://sccmentor.wordpress.com/2013/11/15/creating-a-user-collection-based-on-users-not-in-a-ad-user-group/
Select SMS_R_USER.ResourceID,SMS_R_USER.ResourceType,SMS_R_USER.Name,SMS_R_USER.UniqueUserName,SMS_R_USER.WindowsNTDomain from SMS_R_User where SMS_R_User.ResourceID not in (select SMS_R_USER.ResourceID from SMS_R_User where SMS_R_User.UserGroupName
like “<Domain>\\<AD Group>”)
This just checks AD membership and unpublishes if not a member of the AD group. It's not the nicest of methods as will run for every user if not a member of the group - but may get round your issue.
Cheers
Paul | sccmentor.wordpress.com

Unknown error during 10.4.6 update and now machine doesn't startup

Hi all
As with many people, the update broke my machine.
The update failed with an unknown error. Then no apps would start, so I rebooted, and now the PB won't start, just goes to the Apple with the spinning thingy beneath, and sits there forever.
And suggestions on how to fix this, shy of archive and install?
I can boot off a 10.3 firewire drive and look at the drive. I tried running the standalone update from this to update the 10.4.5 system, but the update won't run because I'm not running the correct system. Thanks, Apple.
So, ideas?

First off, verify the directory is okay with Disk Utility. From there, if you're confident in Terminal, you may be able to recover. I've done it when my 10.4.4 update failed due to directory corruption.
[1] Copy the 10.4.6 Combo Updater onto the 10.4 drive, top level.
[2] Boot into Single User mode off the 10.4 drive.
[3] IF you get into single user mode successfully, proceed with fsck'ing and mounting the volume.
[4] Use hdiutil to mount the Combo Updater (ie hdiutil attach /MacOSXUpdCombo10.4.6PPC.dmg).
[5] Run installer to rerun the combo updater (ie, installer --pkg /Volumes/Mac\ OS\ X\ 10.4.6\ Combined\ Update/MacOSXUpdCombo10.4.6PPC.pkg --target /).
[6] Reboot and see if it worked!
Basically, the idea here is that the Combo updater can overwrite clean copies of all the apps that 10.4.6 tried to update, but since the GUI is hosed you need to come at it from the command line tools of single user mode. So if, it works, you're up and running again. If it doesn't, then you're probably going to have to do an archive and install to get operational again.
Best o' luck!
Various... B&W G3 thru XServe G5

Update for Microsoft Visual C++ 2012 Update on Windows 7

I received the Update for Microsoft Visual C++ 2012 Update 4 Redistributable Package (KB3032622). The installation failed. Here are the details
Installation date: ‎2/‎10/‎2015 8:35 PM
Installation status: Failed
Error details: Code FF
Update type: Important
If you use Visual Studio 2012 RTM product to build C++ apps and use certain functionality from the C++ Standard Template Library in your projects, then you might run into a runtime failure similar to the following:
"The procedure entry point_ crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll"
This was caused due to certain missing function exports in the runtime DLL msvcr110.dll that shipped with VS2012 RTM. This problem was eventually fixed in Visual Studio 2012 Update 4. This article
ensures that the correct runtime DLLs are provided to all users who had previously installed the faulty DLLs from Visual Studio 2012 RTM
More information:
http://go.microsoft.com/fwlink/?LinkID=525548
Help and Support:
http://support.microsoft.com
I tried to run the update troubleshooter, but it did not help. I tried Microsoft Fixit50123, but that did not solve the problem either.
Little Old Prof

Hi Little Old Prof，
I’ve noticed that similar case occurs on this 2/10/2015 update (KB3032622) in some environments. But still a small number.
And we suggest you run the Windows Update Troubleshooter first and check if there is something need to fix.
After that please recheck if this update still in your list of updates to be applied.
Open the Windows Update troubleshooter
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-8
And again, we would appreciate it if you could send us right cbs log file for our reference. Turns out the CBS log you sent to us was ending at 19:01 2/10/2015 and your error occurred at 20:35 2/10/2015.
Regards
D. Wu

Can I update the user ID of a user?

We've noticed that the OOB login component assumes that you log in using your user ID and password. This is fine if you never update the user name, but in our organization the requirement is to let users update their username. How would we need to implement this? We see two solutions:
1) username is in fact user ID. When the user updates the username we need to somehow update that user's ID or delete the existing user ID and create a new one. We do not like this approach as it looks like a lot of reverse replication will need to be done.
2) username is NOT the user ID. In this case it would mean we need to update the OOB login components as that component takes the user ID as input, not the username. We would need to use javascript to find the userID based on the provided username before starting the authorization process. We will also need to make sure that username remains unique across all users.
Any opinions on what would be easiest to implement. We don't really like any of the options. Ideally I wish we could just update the userID of a user as that would mean we can use all of the OOB components for login and profile handling. But I've read that this is not possible.

Hello,
I would refer you to not play with username (userid/principal name) and because you have this requirement i will suggest to add one more property to user node (/home/users) say user_login_name which will have same value as username (rep:principalName) while first time registration.
Now you have to do small tweak in your login module, every time when user will login you would expect value for "user_login_name" and once user click on login button before submitting for authorization you have to query to repository system to get actual username (rep:principalName) from repository and then use actual username for login. It means "login_user_name" will be just for display but back side you will be running same logic by small code tweak.
Now about changes to login_user_name can be easily placed as everytime you will be allowing user to update "login_user_name" not "username" but you must have to take care of one thing that there will be no duplicate "login_user_name" in system. For that you can write a listener which will be fired at the time of form submit or may be you can also do through client side script validation (you have to some research for feasibility at client side - may be "ecma" script can help).
For even listener plz refer - http://blogs.adobe.com/contentmanagement/2012/08/27/how-to-prevent-users-from-entering-dup licate-vanity-urls/
http://sling.apache.org/site/eventing-and-jobs.html
For more information or any issue in listener let me know.
Thanks,
Pawan

No reports are visible in ConfigMgr 2012 R2 console but in visible in SSRS report manager

I'm installing ConfigMgr 2012 R2 with SQL server R2 SP2 in my lab environment. Everuthing went fine until i stumped upon a problem where the reports are not visible in Admin console but are visible in IE
I've gone through all the pre requisites and everything looks good.
The installation went fine and no errors in srsrpsetup.log and srsrpmsi.log
Reports are returning values while i'm running through IE
changed the AdminUIlog level to verbose and found the below error whenever i refresh the reporting node.
[44, PID:10712][12/20/2013 04:16:39] :Console query 'AllReports' started
[44, PID:10712][12/20/2013 04:16:39] :SRSQuery: Executing query [AllReports] - [/ConfigMgr_LAB]
[44, PID:10712][12/20/2013 04:16:39] :[sccm.lab.local] : The request failed with HTTP status 503: Service Unavailable.
[44, PID:10712][12/20/2013 04:16:39] :[sccm.lab.local] : The request failed with HTTP status 503: Service Unavailable.
[12, PID:10712][12/20/2013 04:16:39] :Actions returned from cache for node 'msscnav://root/Windows/Wunderbar/ConsoleDisplay/MonitoringNode/MonitoringNodeOverview/ReportingRootNode/ReportsNode'.
Any ideas ?
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Thank you Garth, I can access the reports from other hosts as well.
Yes ,Newly created admins can see all the reports
I've gone through the event logs and nothing related to SSRS.
I dont think it's a FQDN issue, bcoz ican see in the logs the that the admin console successfully connected to reporting service. Only while retreiving the reports it throws error
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Discovered reporting services point - 'sccm.lab.local'.
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Root folder name is 'ConfigMgr_LAB'.
[12, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[20, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[20, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [Folders] - [/ConfigMgr_LAB]
[12, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [Folders] - [/ConfigMgr_LAB]
[12, PID:3172][12/23/2013 06:13:23] :SRSQuery: Retrieving folders in path [/ConfigMgr_LAB].
[20, PID:3172][12/23/2013 06:13:23] :SRSQuery: Retrieving folders in path [/ConfigMgr_LAB].
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[10, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [AllReports] - [/ConfigMgr_LAB]
[10, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[12, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[20, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[10, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
and as you can see, it gives me "HTTP status 401: Unauthorized." instead "HTTP status Unnavailable".
Yes, i'm not a fan of accessing reports via console, but i dont want to leave an issue unresolved.
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2

Hello all,
After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
The job was cancelled. The user either cancelled the job or modified the associated protection group.
Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
Thnks, Andrea

Hi Andrea,
Have you installed the update 2919355?
To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
According to the official website, the issue which you described is not listed as the known issue.
Please uninstall this update and continue to monitor the official website for the latest news.
Best Regards.
Steven Lee
TechNet Community Support

Cumulative Update 4 installation for SCCM 2012 R2

Hi all,
This is my first time installing a CU update on SCCM 2012.
We have an environment with 15 Servers, 1 is a Primary and the other are Site System Servers.
Would I need to install the CU4 update only to the Primary server? or would I have to deploy the CU4 to the other 14 Site Systems Servers.
I've been reading the following
http://support.microsoft.com/kb/3026739
http://dekeukelaere.com/2014/01/30/implementing-configuration-manager-2012-sp1-cumulative-update-4/
http://blogs.technet.com/b/configurationmgr/archive/2014/01/29/now-available-cumulative-update-4-for-system-center-2012-configuration-manager-service-pack-1.aspx
And also if they don't have CU3 on them would I need to do that first, or would
CU4 encompass previous updates.
Cheers for any help on this matter.

When they're only site systems with a role installed than those roles will be upgraded with the primary site installation. Here is one of the many nice posts about the installation process (and order):
http://www.scconfigmgr.com/2015/02/03/install-configmgr-2012-r2-cu4-in-your-hierarchy/
Also, you don't have to install CU3 first.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Postpone/Snooze updates on User Machines - ConfigMgr 2012 R2

Similar Messages

Maybe you are looking for