Postscript level 3 support

Hi,
I support Adobe output designer for some customers who have recently purchased new postscript level3 printers.
All of the jetform presentment targets are postscript level 2 and use the setpapertray command to select the papertray on the printer.
This command is not supported in level 3 and so tray selection does not work...
Adobe have created a few level 3 targets (Xerox i think) but although these use the  input priority method of selecting the paper trays
which works correctly, the postscript is badly formed and the page co-ordinates are reset on every page...causing every page except the first to be
blank.
Does anyone know of a fix for this or have a working ICS file for a postscript level 3 device.
Any help would be appreciated.
Thanks

What version of java are you using?
Are you using any threads?
Why can't you just print two copies and combine the whole pages? (kidding)

Similar Messages

  • Using HP Laserjet 5100 as a postscript level 3 device

    Hi Smart People,
    I'm usually pretty good at figuring this kind of thing out, but this setup has me at the edge of my understanding. If you could help me out, I would be very grateful.
    I'm planning to use my 5100 to print offset plates for use on a printing press. I'd like to be able to use Adobe Acrobat Pro to output RIP-processed color separations with trapping. Acrobat says that this is possible with Postcript Level 3 devices, and as far as I know the laserjet 5100 is such a printer.
    I'm connecting the printer to the computer using a ethernet cable to the Jetdirect (directly, without using an ethernet switch). I can get the printer printing just fine, but when I try to send a separation job to the printer, I get an error message on the printer display (79.00 PRINTER ERROR). I've tried using both AppleTalk and TCP/IP and get the same results.
    I've read in the HP documentation that the parallel port is the only connection that can access all of the printer's capabilities. This has me thinking that connection the printer via the Jetdirect precludes the use of the internal Postscript Level 3 RIP. So my questions are:
    Is this true?
    If it is true, is it possible to connect the printer via the parallel port to my mac? Maybe with a parallel-to-USB converter cable? Or with an ethernet switch with a parallel port printer server?
    I've seen mention on the internet of a set of files from HP called something like "HP Laserjet Monochrome for Mac" that seems to install postscript printing capabilities, but I can't find a functioning link to the file (the file seems to have been deleted from HP's site). Is this what I'm looking for?
    Is there anything else I can do (besides buy a -shudder- PC to act as a print server) to get this working?
    Thanks a ton,
    Gary

    I think the jetdirect is the correct method to use all the printer features (postscript 3).
    Setting up a direct ethernet connection is tricky. You must set a manual IP address on the Mac, even to use appletalk. You should also set an IP address on the jetdirect, then add the printer using IP > jetdirect protocol.
    Set computer and printer to be in the same local-reserved subnet - example - 192.168.3.3 for computer and 192.168.3.4 for printer (subnet mask 255.255.255.0 for both).

  • CSS Level 2 Support for RGB Hex Abbreviation

    when creating a style sheet during the tutorial in
    Flash 8: Training from the Source, i abbreviated my hex
    colors as usual when i have repeating pairs (in this particular
    case #999 instead of #999999) and the publised Flash page would not
    display the correct color. it displayed black text instead of gray.
    after changing the #999 to the full #999999, the republished
    Flash page displayed the page correctly. I understand from the book
    Flash 8 does not support level 2 CSS, which includes more than my
    simple abbreviation issue.
    when do you (Adobe Flash Team) expect to incorporate CSS
    level 2 support into the product? is it supported by Flex 2, as I
    am not too familiar with that platform yet?
    thank you,

    Hi Mike,
    OHJ uses the ICE Browser, which we license from a company named ICESoft. It generally compares favorably with other Java-based browsers, although it is not as complete as a native browser such as IE or Firefox.
    There is a list of what is and is not supported in CSS:
    http://www.icesoft.com/developer_guides/icebrowser/htmlguide/featuresappendix3.html#86328
    We recently finally resolved the licensing issues that were holding us back from releasing a version of OHJ with JavaScript support. The current versions don't support JavaScript, but our next major release will.
    Depending on your needs, we also have OHW, which is a server based help system, that uses the client's native browser.
    Regards,
    Jeffrey Stephenson
    Oracle

  • Reader 9.2 does not choose the right postscript level

    Hi,
    I use an old HP4500 Color Laser Jet (it still prints very well and I have a lot of toner :-)). every time I want to print a pdf on it, it does not work, for the adobe reader sets the postscript level to 3 although the printer has only 2.
    I've found the information anywhere in the adobe pages, which say:
    "Note: Acrobat sets the PostScript level automatically, based on the selected printer."
    In my printer settings (Win7-64 bit, driver: HP Universal Printing PS Version 12.4.2009, 61.94.3.37) I have set the level to 2 (Dokumentoptions:Postscript Options:Postscript language level: 2)
    But Adobe Reader is not interested in my settings and sets it to 3 every time and I have to change it manually every time. That is not funny, when printing many pdfs.... :-(((
    I don't understand this, it has happend with another driver under windows xp the same way, but now I have lost my patience.
    Why does the reader does not work properly or can I tell him to do so ?
    Best regards
    Thomas keller, Germany

    Thanks Bernd!  Works just fine now. Am I that obtuse that I wasn't able to
    figure this out on my own?

  • Exporting files to a eps postscript level one

    hello all.
    We have just bought a new cutter plotter and the software that was supplied was artcut for a PC, I use a Mac and would like to use Illustrator (CS4) as the main design programme but to import the files into Artcut the need to be a eps postscript level one - does anyone know of a plugin that can be used to do this?
    if you need more info please ask.
    Thanks
    Craig_5br

    Craig,
    I wonder whether it can be done from version 8 or something. I can choose between level 2 and 3 in 10, 1 is shown but greyed out so I believe it is possible if the version is old enough.
    If you (still) have one of the old versions, you may have a look and see; hopefully you can downsave and take it from there. Someone else might tell us.
    Someone?

  • Release 600, Level 11 (support pack SAPKGPAD11) vs Release 604, Level 03 (s

    Hi,
    We are moving into the SAP ECC enviroment and need to understand the difference between the 2 Support Packs Release 600, Level 11 (support pack SAPKGPAD11) vs Release 604, Level 03 (support pack SAPK-60403INEAAPPL).
    Can anyone give us an indication in terms of functionality what we should be looking out for? During the testing we already came across and issue regarding double invoicing but this was fixed with a OSS note.
    From a coding, functionality, intergration and process perspective,how do we know what the differences are? Is there a document that lists these difference as a quick comparison between the two releases.
    Thanks in advance

    Hi,
    There is lot of difference btween 2. ECC System with EHP4 (Release 604 Level 3), ECC package will be on 604 release and level represents the support pack level of 604 release. If your system is on this level then it means that your system is with Enhancement packages but if your ECC components are on release 600 then it is without Enhancement packages.
    Enhancement packages has been delivered a lot of new things like New GL etc. More information for what extra features ECC 6.0 with EHP4 has: can be checked on http://service.sap.com/erp-ehp.
    To take your system from 600 release to 604 release requires a lot of effort because you have to upgrade your system to bring at this release.
    Thanks
    Sunny

  • Level 2 support can't read.

    Really ****** off with BT now.
    BT india can only go so far with there things, but Level 2 support is just a joke.
    Ive said multiple times to ring my mobile as its difficult to get hold of me on the landline.
    What do they do? Ring the landline.
    They say they will ring back in 30 mins but they never do.
    BT india has appolagised but its not really enough and has made notes on the thing to ring my mobile by 5PM tomorrow. but if they do not I will not be happy and will really consider just terminating broadband with BT and transfering my phone line to the post office and will not pay the termination fees as my contract does not expire until april 2013.
    THen get a new phone line and broadband with SKY since they seem to actually have customer service when I have problems with there TV service.

    what problem are you having?
    do remember that regardless of which supplier you go to it will be openreach supplying and maintaining the line also BT will still charge the cancellation fee and if needed will put it in the hands of debt collectors and that will cost you more i am sure with more detail the mods can resolve your problem for you
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Postscript printers are supported by Campus Solutions and PeopleTools

    I am trying to find a listing of what postscript printers are supported by Campus Solutions 8.9 and PeopleTools 8.51. I am not very familiar with the software but need to spec a printer that will fit in a small area that is supported. I am having issues with a currently installed printer and would like some clarification before purchasing another printer to solve my issue. I know that the print server is running Windows Server 2003. Any assistance would be greatly appreciated as I need to submit a report on my findings in roughly 14 hours and have not had much luck with Google.

    I found one but now who uses OS 9 anyway

  • What is a patch level in supporting package?

    hai pals,
            can u pls help me out know , what is an patch level in supporting packages ?.
            right answers will be appreciated.
    with regards,
    raj

    Hi Raj,
    A Support package is a collection of corrections for an SAP product and the level specifies the version of an SAP system with regard to the Support Packages that have previously been imported.
    Bye
    Dinesh

  • Levels of support

    Hi,
    What are the levels of support project?

    Hi
    In Support project, generally there are 3 levels of support
    L1, L2 & L3.
    L1 - support is basically provided by key user (super user) at client location. It is related to basic issues.
    L2 - Any process related issue which is not resolved by key user.
    L3 - change request or any enhancement is required in the existing process.
    Generally consulting companies provide L2, & L3 support.
    thank you

  • Error Isolation Level not supported

    Hi,
    During a launch of a package, I have this error
    0 : null : java.sql.SQLException: SnpsConnection: isolation level not supported
    During the execution of a pl/sql procedure.
    When I run this one, I have no problem, but It doesn't work inside the packege.
    This is the configuration:
    Tecnology: Oracle
    Isolation level: not specified
    Contest: Global
    Transaction: Autocommit
    Schema: DB_Target
    Commit: not specified
    I have already tried other Isolation Level settings as: None,Default .... but no one works.
    Thanks for all and best regards.

    I guess you are taking Isolation level: None
    If it is, make it Undefined and run your package.
    Bhabani
    http://dwteam.in

  • What are the roles in L1,L2 ,L3 and L4 support levels in support porject

    HI,
    What is the difference between L1,L2 ,L3 and L4 support levels in support porject.
    tahnk you

    Generally Level 1 and 2 support may be initial approach support like user id maintainenace, basic extension of IDs, workflow conordination etc.Batch job triggering
    Level 3 and 4 will have enhancements and post implementation support.
    BR,
    Krishna

  • Changing Postscript Level....

    I was wondering how to create a postscript Level 1 file? The current default is creating it at postscript Level 3. Any help would be great.
    Thanks,
    Tom

    hello,
    the postscript level that is generated by reports can not be changed. the level is defined by the used features and hance it is fix for each version of reports.
    regards,
    philipp

  • Aggregation level doesnt support non-cumulative kf

    hello
    IP planer generates an error "Infoobject 0AMOUNT (version A) is not compunded" when I include non-cumulative kf into aggregation level of infoprovider.
    KF ZAMOUNT is non-cumulative and depends on 0AMOUNT. Both kf are active.
    I need non-cumulative kf just for informative purposes, i dont want to plan with this kf.
    Does anyone know is it possible to use non-cumulative kf in aggregation level of multicube?

    Hi,
    no non-kumulative key figures are not supported in aggregation levels.
    But one can use a MultiProvider on the cube with the non-cumulative key figure. Create an aggregation level for the objects you want to plan and use this aggregation level also in the MultiProvider. Then you can integrate the 'plan objects' and the non-cumulative key figure in a query defined on the MultiProvider.
    Regards,
    Gregor

  • Terrible Customer support, I upgraded my account they took the money and nothing works.  I have done chat support and was told they were levating to the next level of support and have heard nothing.  I have been on hold on the phone for over an hour.

    I upgraded my account yesterday. They charged my card and nothing works,  I was on with online chat support for a hour last night. I was told they were levating my support to the next level.  Never heard back from anyone  I have been on hold for over an hour on phone support. 
    This is really awefull way to treat your customers.

    Unless an employee stops by this forum and reads your message, you need to know...
    This is an open forum, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for