Posture Assesment/Remediation is not working in my ADSSO setup.

Hello Guys,
I set up my NAC L3 out of band and use for ADSSO. ADSSO authentication is working fine but when i apply the rules for Posture Assesment and remediation is not working. Folks, What seems to be the problem of this.
Thank you and best regards,
Edwin

Similar Messages

Remedy connector not working with OIM 9.1.0.2

Hi,
I am using the OIM connector, BMC Remedy User Management 9.0.4.12 with OIM 9.1.0.2 BP18 on Weblogic 10.3.2
I have followed the connecter documentation at "http://docs.oracle.com/cd/E11223_01/doc.904/e10422/deploy.htm#BGBIFBHG".
The connecter is installed successfully. The dependency files are placed in the directories as per section 2.3 of the above note. And the Communication between Remedy server and OIM is not SSL.
When I run the schedule task for “Remedy Lookup Reconciliation”, I get the error. I have checked that all the dependencies are in the correct location and the path variables are set properly:
DEBUG,29 Feb 2012 15:03:28,092,[XELLERATE.SERVER],Class/Method: SchedulerTaskLocater /removeLocalTask entered.
DEBUG,29 Feb 2012 15:03:28,092,[XELLERATE.SERVER],Class/Method: SchedulerTaskLocater /removeLocalTask left.
Exception in thread "QuartzWorkerThread-0" java.lang.NoClassDefFoundError: Could not initialize class com.remedy.arsys.api.Proxy
at com.remedy.arsys.api.DefaultProxyManager.getProxy(DefaultProxyManager.java:60)
at com.remedy.arsys.api.Util.ARSetServerPort(Util.java:1461)
at com.thortech.xl.schedule.hostAccess.ReconcileBMCLookUp.connect(Unknown Source)
at com.thortech.xl.schedule.hostAccess.ReconcileBMCLookUp.getLookUpData(Unknown Source)
at com.thortech.xl.schedule.hostAccess.ReconcileBMCLookUp.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
DEBUG,29 Feb 2012 15:03:56,337,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,29 Feb 2012 15:03:56,337,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
Let me know if you have an idea on what maybe going wrong here..
Thanks.

As per given bug it is looking for jars which is missing
have you install connector using deployment manager?? if yes it copy required jars at target location. verify if not there copy jars in Scheduled Task folder.
Check the document if any external jars required and same put at ThirdParty folder

Product allocation not working even after complete setup at sales order lvl

Hi All,
I have setup product allocation as detailed in forum earlier links, still I am not gettin sales order to use ATP with product allocation. I have tried with S140 and S700 with no success. Already went thru all the steps starting with OVZ* tcode. And during allocation check I can see the part number which has PRODUCT ALLOC procedure assigned. So, what is missing?
Appreciate if someone can provide me with a SAP documentation to make sure I can recheck the settings one final time.
Thanks.
Naren

It worked but doesn't seem to suit business requirement.

Vpn is not working with manual IP setup in Yosemite

After upgrade to Yosemite, my VPN stops working.
I have tried to switch to another VPN (of my friend's), still no luck.
I tried to use DHCP, rather than manual IP setup, it worked perfectly. It is a pity that my company policy does not allow me to use DHCP.
Is it a bug that has been reported? I tried to google for a while but couldn't find out much info.

I've just wasted 2 HOURS diagnosing non-existent router issues due to this OSX "bug"
Thank you for the workaround. Let's hope they get this resolved soon!

Photoshop CS5 for Windows not working on dual monitor setup

If I try to open Photoshop CS5 while my second monitor is plugged into my laptop (via VGA cable), it loads normally, but won't display any opened images. I get a gray background and nothing else. (see screenshot here: http://screencast.com/t/f1bHcM3E )
(I can even see the tiny image preview in the navigator, but not the image itself.)
However, t'll work just fine if I open Photoshop with the second monitor disconnected and THEN plug it in, so it's not a problem with the dual monitors in general...just when first opening it. It's annoying because, if I'm working on a project and realize I have to make a quick image tweak in Photoshop, I have to unplug the monitor and then rearrange all my windows after Photoshop's done loading and I can plug it back in.
Does anyone have any idea what's up with this? I can't seem to find any information online that specifically mentions this issue. For reference, I'm using Windows 7 on a Lenovo laptop.
Thanks!

Oh, that's possible. I went and read the detailed specs for my computer and it seems like it has both Intel and NVIDIA. Could that be it? (Computer hardware issues are not my area of expertise.)

Sustain pedal not working with my MIDI setup

So, I'm using a Yamaha P-140 hooked up with my Macbook Pro using a Midi-USD cable. I'm mostly using it for Logic Pro X and Sibelius, and it works just fine. However when I use the sustain pedal, it's playing an E3 note and it's messing up all the sound adding a lot of reverb.
Now, this isn't a problem when I'm using the piano as it is. It's also not a problem with either Logic or Sibelius, cause when I'm testing it with the "Sound and MIDI Setup" app on Mac, the sustain pedal is recognized as one of the "hammers" on the keyboard.
I have no idea as how to fix this problem, and it's really annoying having to play super legato when I'm recording.
Thanks in advance.
Note: The keyboard have an "AUX Pedal" input and a "Sustain pedal" input.
USB MIDI Cable specs:
(As written on the package)
- Built-in driver
- USB powered and Class Complaint for true plug & play. Just connect to a computer USB socket for automatic installation of the driver.
- 1 in + 1 out MIDI interface; 16 MIDI input channels & 16 MIDI output channels
- LED's indicate power on, MIDI in signal and MIDI out signal.
- Supports Windows XP, Vista and Mac OS X operating systems
Aditional info:
Now, I've seen the event-recording in Logic for when I use the pedal, and it's picking up 2 different signals. The first one is a "Controller" (as it say under "status") with the info "Sustain", the next 2 have the status "Note" each one triggering an E3.
I looked it up and the pedal is a Yamaha FC3 half damper sustain pedal. I'm not an expert when it come to pedals, but I believe a half damper is a pedal with multiple trigger points? Giving you different amounts of sustain depending on how much you're "pressing it".
(Position 2 1 1 19 = pedal release)

Try deleting Logic's preferences... sounds like a control surface issue.
Delete the Logic 10 preferences file AND the shared control surfaces file.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this.
If you are having trouble with a control surface in Logic Pro.
then delete the com.apple.logic.pro.cs file from the preferences folder.
Note: Delete both files, they will be rebuilt the next time Logic runs.

Disk2vhd image not working because of SCSI setup

Hi there,
We're in the process of migrating our servers from Win Server 2003 R2 to 2012. Because of certain circumstances, we decided to first convert our 2 web servers, both running on 2003, to vms running on Server 2012.
I was able to successfully create an image using disk2vhd. The problem is, our servers have SCSI disks and and from what I've found, first generation VMs cannot boot from SCSI. I'd need 2nd generation vms for that, but Server 2012/Win8 is the minimum.
Is there a work around for this?

Hi LiaoAndrew,
Please refer to "install integration services when the virtual machine is not running" to install IC ,then try to boot the VM.
Here is the link:
http://blogs.technet.com/b/virtualization/archive/2013/04/19/how-to-install-integration-services-when-the-virtual-machine-is-not-running.aspx
(cause of server2003 , you need choose the Windows5.x-HyperVIntegrationServices-x86.msi or Windows5.x-HyperVIntegrationServices-x64.msi)
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Kerberos not working even though all setup

okay, I am at my wits end. I setup DNS on the server first, both forward and reverse, pointed the server to itself, did a check all was fine, setup OD it auto populated correctly and setup just fine, however I am having a problem authenticating against Kerberos.
DNS:
Forward:
enterprise:~ root# nslookup enterprise.ahblawyers.com
Server: 192.168.1.100
Address: 192.168.1.100#53
Name: enterprise.ahblawyers.com
Address: 192.168.1.100
Reverse:
enterprise:~ root# nslookup 192.168.1.100
Server: 192.168.1.100
Address: 192.168.1.100#53
100.1.168.192.in-addr.arpa name = enterprise.ahblawyers.com.
/var/db/krb5kdc/kdc.conf file:
## This file autogenerated by KDCSetup from (null) ##
[libdefaults]
default_realm = ENTERPRISE.AHBLAWYERS.COM
[kdcdefaults]
kdc_ports = 88
kdctcpports = 88
[realms]
ENTERPRISE.AHBLAWYERS.COM = {
kadmind_port = 749
max_life = 10h 0m 0s
maxrenewablelife = 7d 0h 0m 0s
masterkeytype = des3-hmac-sha1
supported_enctypes = des3-hmac-sha1:normal arcfour-hmac-md5:normal des-cbc-crc:normal des-cbc-crc:v4
acl_file = /var/db/krb5kdc/kadm5.acl
admin_keytab = /var/db/krb5kdc/kadm5.keytab
database_name = /var/db/krb5kdc/principal.ENTERPRISE.AHBLAWYERS.COM
keystashfile = /var/db/krb5kdc/.k5.ENTERPRISE.AHBLAWYERS.COM
[logging]
kdc = FILE:/var/log/krb5kdc/kdc.log
admin_server = FILE:/var/log/krb5kdc/kadmin.log
/Library/Preferences/edu.mit.kerberos file:
# WARNING This file is automatically created, if you wish to make changes
# delete the next two lines
# autogenerated from : /LDAPv3/127.0.0.1
# generation_id : 578582659
[libdefaults]
default_realm = ENTERPRISE.AHBLAWYERS.COM
[realms]
ENTERPRISE.AHBLAWYERS.COM = {
admin_server = enterprise.ahblawyers.com
kdc = enterprise.ahblawyers.com
[domain_realm]
.ahblawyers.com = ENTERPRISE.AHBLAWYERS.COM
ahblawyers.com = ENTERPRISE.AHBLAWYERS.COM
[logging]
admin_server = FILE:/var/log/krb5kdc/kadmin.log
kdc = FILE:/var/log/krb5kdc/kdc.log
/etc/hosts file:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
192.168.1.100 enterprise.ahblawyers.com
/etc/resolv.conf file:
search ahblawyers.com
nameserver 192.168.1.100
But here is the output from kinit:
enterprise:~ root# kinit ######@enterprise.ahblawyers.com
Please enter the password for ######@enterprise.ahblawyers.com:
Kerberos Login Failed: Cannot resolve network address for KDC in requested realm

okay so I changed the kdc file back to what it was, but it still doesn't work :
## This file autogenerated by KDCSetup from (null) ##
[libdefaults]
default_realm = ENTERPRISE.AHBLAWYERS.COM
[kdcdefaults]
kdc_ports = 88
kdctcpports = 88
[realms]
ENTERPRISE.AHBLAWYERS.COM = {
kadmind_port = 749
max_life = 10h 0m 0s
maxrenewablelife = 7d 0h 0m 0s
masterkeytype = des3-hmac-sha1
supported_enctypes = des3-hmac-sha1:normal arcfour-hmac-md5:normal des-cbc-crc:normal des-cbc-crc:v4
acl_file = /var/db/krb5kdc/kadm5.acl
admin_keytab = /var/db/krb5kdc/kadm5.keytab
database_name = /var/db/krb5kdc/principal.ENTERPRISE.AHBLAWYERS.COM
keystashfile = /var/db/krb5kdc/.k5.ENTERPRISE.AHBLAWYERS.COM
LKDC:SHA1.485A63A057FF8BD3DA6BDBA1962A00F7F404CB11 = {
kadmind_port = 749
max_life = 10h 0m 0s
maxrenewablelife = 7d 0h 0m 0s
masterkeytype = des3-hmac-sha1
supported_enctypes = des3-hmac-sha1:normal arcfour-hmac-md5:normal des-cbc-crc:normal des-cbc-crc:v4
acl_file = /var/db/krb5kdc/kadm5.acl
admin_keytab = /var/db/krb5kdc/kadm5.keytab
database_name = /var/db/krb5kdc/principal.LKDC:SHA1.485A63A057FF8BD3DA6BDBA1962A00F7F404CB11
keystashfile = /var/db/krb5kdc/.k5.LKDC:SHA1.485A63A057FF8BD3DA6BDBA1962A00F7F404CB11
[logging]
kdc = FILE:/var/log/krb5kdc/kdc.log
admin_server = FILE:/var/log/krb5kdc/kadmin.log

Return to quiz not working

I'm having trouble with the return to quiz function in Captivate 7. I have tried a number of solutions to work around this but none seem to be working. I have a project with a series of course slides followed by a quiz. I have set some of the quiz slides to 'jump to' relevant course slides on failure and set the next button on those course slides to return to the quiz. I seem to be running into two issues:
when playing through the course slides for the first or subsequent times the return to quiz button seems to become stuck (on most occasions, not consistently). It does not progress to the next slide and the playhead indicates that the project has stopped playing. Hitting play on the playhead progresses the slide but it is a frustrating experience.
when taking the quiz, the remedial learning seems to work well the first time the quiz is taken but not once ‘retake quiz’ is selected. On retaking the quiz, the correct slide is jumped to on failure but instead of the return to quiz button sending the user back to the quiz, the button seems to function like a ‘go to next slide' button. The user then cannot seem to be able to return to the quiz.
Any help would be appreciated.

Check if you have perhaps changed your Quiz settings to disable Backward movement. That might account for your issue where Remediation is not working now.
Return to Quiz is designed to work with normal interactive objects such as Text Buttons, Image Buttons, or Shape Buttons, but NOT playbar buttons because Captivate does not allow you to script the functionality of the playbar buttons.
You will need to add a text button or similar to the remediation slide and set it's On Success action to Return to Quiz. If the remediation slide is NOT reached from a quiz question then that button will simply default to a Go to Next Slide action. However, IF the slide is visited as a result of a jump from an unsuccessful quiz question THEN the button's Return to Quiz action will kick in.
Be aware that using Return to Quiz gives your learners potentially unlimited extra tries on the quiz questions. And in doing so it can mean they get caught in an endless loop as long as they do NOT successfully complete the quiz question slide.

Push replication on start up of a new node is not working

Say, if one cluster alone is started initially and there are few elements added to it and then I start the second cluster with push replication enabled.
How do I load the already added elements in the first cluster to the second one ?
This is not working in my current setup. Is there any special config that I need to add?

By default Push Replication only replicates entries as they are added to a system. If Push Replication is not configured initially, is started in a "stopped" mode instead of "suspended" mode, the initial entries will not be replicated.
The easy solution to this is to start Push Replication in "suspended" mode.
Hope this helps.
-- Brian
Brian Oliver | Architect | Oracle Coherence

HP Pavilion tx2500z - Default Function Keys not working

I have a HP Pavilion tx2500z (model: KD436AV) laptop with Windows 7 64 bit OS installed. Since last few months, I am not able to use default function keys (F1, F2...F12) and other keys at the top row of the keyboard, including Pg Up, Pg Down, Home, End, Insert, Delete. However, all the Action Keys available on these keys are working without pressing Fn Key (e.g. Sleep, Brightness, num lock etc). I get same Action Key behaviour even after pressing Fn Key.
It looks like, somehow system is locked in action key mode and I am not able to come out of it. I tried to upgrade Bios (currently on latest F.0F version) and also tried to disable the Action Key mode in BIOS, but Action Key mode is not available in BIOS of this computer. Even to enter BIOS, I faced problem because F10 key was not working to enter BIOS setup. I had to connect external keyboard to enter BIOS.
I am disperately looking for help to come out of this situation. Any help will be greatly appreciated.
Thanks in advance.

Hello,
An idea for you would be to test the keyboard in a different enviroment ro see if it's hardware or not.
We can check the keys by booting into the recovery partition and opening a command prompt.
Power down notebook
Press power button then tap F11 until the screen says recovery at the bottom left or says Windows is Loading files. If it shows a different menu on your screen you may have press it too late or continues to load Windows you may have an issue w/ the partition.
Next when it loads into the menu choose an option so the program is slected. I select "System Recovery" then at the next menu press FN+SHIFT+D
At the commpand prompt window that pops up test the keys w/ issues.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

ISE posture redirect not working

ISE v1.1.0.665, 3395 h/w.
Single Admin/Monitor/Policy node.
WS-C3560-48TS 12.2(55)SE5 C3560-IPBASEK9-M
For Client Provisioning I created an authorisation policy as follows:
download acl "ACL-POSTURE-REMEDIATION"
apply url redirect "ACL-POSTURE-REDIRECT".
"Debug radius" shows all this is downloaded to the switch but:
- Redirect does not work.
- dACL is not applied if the URL redirect is also configured.
Wireshark on the client shows no direct.
Attached file shows "debug radius" for various combinations of authorisation policy i.e. dACL only, Redirect only, dACL + Redirect.
I've also attached screen shots of these policies and wireshark.

Grant,
It looks like you are changing the vlan after your client gets an ip address, it seems like the client gets an ip address of
192.168.16.164 and you are changing the vlan over to 516. I wanted to know if that is there isnt an ip to vlan mismatch before you move forward. If 516 is quarantine vlan you may want to start all clients on that vlan and use dynamic vlan assignment through change of authorization once a client becomes compliant. The reason is is that you can use the web portal, or the nac agent to change the ip address once the vlan is changed.
Thanks,
Tarik Admani

My iphone4's mic is not working. I can assure that my iphone4 is not on mute mode. The audio is working only when headset/handsfree plugged in.I tried reset my handset many times already but still nothing got success.what is the remedy to comeout from it.

My iphone4's mic is not working. I can assure that my iphone4 is not on mute mode. The audio is working only when headset/handsfree plugged in.I tried reset my handset many times already but still nothing got success.what is the remedy to comeout from it.

Try plugging the headphones in and gently wiggling them around for a few seconds. It may be that the sensor that tells the iPhone that headphones are plugged in has gotten stuck. If this doesn't work, they try a reset (hold down Sleep/Wake and Home all the way until the Apple logo appears on the screen).

My iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

Hi, braidenwhitesidemate.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the article below. If the issue persists, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H.

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

On my laptop when I open up a pdf file and do a search for a particular
text phrase it prompts me to run a character analysis. Whereas on my mac
mini, when I try to engage the same process it just says it couldn't find
the phrase and doesn't even try and run a character analysis. I tried
clicking on the tool bar and the recognize text tab but nothing there seems
to do anything.
In trying to figure out the issue on my own I noticed one thing. I run a
small law firm in St. Louis and I scan in all my files to which are
subsequently emailed to my outlook account where I will save them as pdf's
to their respective folders. On my laptop when I open up an email from my
scanner I see the image of a acrobat document next to the attachment
paperclip symbol. However, when I open up the same email on my mac mini I
notice instead of an acrobat file image it shows a Preview file image (the
program used to open up pdf's before I installed acrobat).
Hope this helps!
Sincerely,
Jonathan McAllister

Posture Assesment/Remediation is not working in my ADSSO setup.

Similar Messages

Maybe you are looking for