Pot will not update until next poll

I know, it sounds like a snap delay problem. But, that is not the problem. I am using 5.0 now, but with 3.8.16 this was not a problem. It appears 3.8 put the value in the register and then read it, but 5.0 puts the value in the register and doesn't read it until the next poll. Anybody got any ideas? Thanks, Matt

ok, I am using a pot as a set point for a water level. The setpoint is stored in a modbus register. Let's say my setpoint is 14. Now, I want to change the setpoint to 15, so I enter 15 in the pot. It changes to 15 and then after several seconds it changes back to 14. It stays at 14 until the next poll, which is 15 minutes, and then changes to 15 permanently. I know there is a delay setting for this problem, but I think the maximum is 65 seconds, so that won't work since our polling cycle is every 15 minutes. Either way that is irrelevant because we didn't have this problem when using ver. 3.8.16. What I believe is happening is that with 3.8.16 the new value was put in the modbus register and then Lookout read the register. With 5.0 it appears that Lookout
puts the value in the Modbus register but doesn't read that register again until the next poll. Hope this info helps. Thanks, matt

Similar Messages

  • CS4- Pictures will not update until I choose a tool

    When I try to do anything to a picture the effect or change will not occur until I click on a tool.  Then it will instantly show the change I made.  Doesn't matter what tool I choose and doesn't matter what the change..i.e. sharpen....using a filter etc.  Also, for instance, if I choose unsharp mask (doesn't matter what I choose...this is just an example) the picture will not show in the preview window unless I choose the plus or minus symbol beside the 100% and will not show in the preview until I choose one also.  I've tried this on several different layers.  I already had the latest 11.0.1 I believe and have not updated or installed anything lately.  Did a complete virus scan.  My old drivers were working fine but updated to the new ones to try and see if it would help.....amd/ati radeon 3100.  Used shift + CNTL + ALT to clear my preferences....I have tried it with GL on and off.  In short I have tried everything I can think of.  Basically everything works perfectly except after you make any kind of change you have to click a tool or something else before you see the change.  Even clicking the little eye symbol beside each layer will not let you ...see or hide...that layer until you click the eye symbol and then click a tool. Sometimes on starting the application all the choices are greyed out....even exit....until I click a tool.   Anyone got any ideas?  Thanks for your help.  I don't want to have to resinstall...I am on vacation for the next 3 weeks and would like to be able to edit my pictures.

    av8rphoto wrote:
    I already had the latest 11.0.1 I believe
    Did you actually check?  (Help > About Photoshop)
    Re-installing  Photoshop from the DVD or saved download (and updating) is not such a mammoth task by the way.
    There was a similar snag reported some months ago, maybe a forum search would find the posting.

  • I have 4.0.1, with the RealPlayer download plugin. I would love to update, but I understand that the plugin is incompatible with the update. I use the RP download plugin regularly, and will not update until it's compatible. Any info on this?

    ..... Windows 7, but I think you know that already. No more info, pretty basic question....

    ..... Windows 7, but I think you know that already. No more info, pretty basic question....

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • When are you going to make GOOGLE TOOLBAR compatible with the latest version of firefox, i will not update to version 8 until its compatible

    Question
    When are you going to make GOOGLE TOOLBAR compatible with the latest version of firefox, i will not update to version 8 until its compatible

    It's not going to happen. Google announced withdrawal of their Google Toolbar.
    Using Google Toolbar features without toolbars - MozillaZine Knowledge Base
    :http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
    The Google Toolbar will not be updated for Firefox 5 or later Firefox versions. ([http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html reference]) Google finally decided that their [http://kb.mozillazine.org/Problematic_extensions problematic extension] is beyond repair for the little benefit added for Firefox users. Google as with other browsers is eliminating or making toolbars less accessible.
    Consider the features that you are using and see if you can match up features from the list created by Google and by Firefox users.

  • Wondershare's iDraft for $2.99 will not update crashing issues due to 4.2!

    Wondershare will not update their iDraft App, on the App Store, for compatibility issues due to iOS 4.2! iDraft costs $2.99, and should be pulled from the app store. An app should not be sold, until the issue is addressed. It's wrong, and I want to see some progress, instead of emails saying that we are heading in a different direction... Then return email back saying that we are now working on the issue, and I could get a discount on Wondershare apps...
    Wondershares response to fix the Crashing issues for iDraft...
    (1st Response)
    "Dear Customer,
    Thanks for contacting us. This is Ivan from support team.
    Currently iDraft does not support iOS 4.2, and we do not provide future upgrades for this product due to our company long-term blueprint.
    Sorry for the inconvenience.
    We are now working on a new application on Android platform.
    Just let me know if you have any question."
    (2nd Response)
    "Dear Customer,
    I am very sorry for the trouble.
    We have temporary paused the future upgrades of this product, but never permanently give up it.
    And we are focused on another product which we hope it can bring more fun to all iPad users.
    I have forwarded your message to our R&D department, and we will look into this case and improve the software performance.
    As compensation, we can offer you an extra 20% off if you are interested on any product on our official site. Just let me know the product name.
    Let me know if you have any question."
    (3rd Response)
    "Dear Customer,
    I am very sorry for the trouble.
    Currently iDraft does not support iOS 4.x, we are now working on the update.
    If you don't mind, I recommend you wait for next upgrade.
    I will send a message to you as soon as we launch it.
    Or you may contact Apple for refund if you prefer. We would like to offer you a refund but we are not able to do it, there is no refund option in vendor's portal."
    I have reported the issue to Apple, and thought this may be of interest to you guys as well.
    Your Thoughts?

    Welcome to Apple Support Communities
    Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

  • HT4623 My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.

    My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • My iPhone 4s iOS 7.0.4 will not update music or apps from iTunes 11.1.3.  this was true of my pc and the new MacPro.

    My iphone 4s ios 7/0/4 will not update music or apps from itunes 11.1.3.  this was true with my pc since ios 7.0.3 even with update 7.0.4 and now continues with my new MacPro also runing itunes 11.1.3.   as most state in previous threads, syncs all non itunes related data with no issue and appears to work correctly on itunes data but then hangs on the last step of updating until it times out.  i have tried marking specific music to transfer, setting up new playlist, deleting some old playlist on phone but stopped short of restoring my phone back to new due to the amount of non itunes data that i will lose.  The itunes setup on the macpro was completely with the download of all music from a previous external backup and the creation of new playlist - on the first sync with existing phone it did ask to overwrite all phone itunes data with macpro itunes data which i did accept - no different result - no changes on phone.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved. 
    If the problem continues, take the device to Apple for evaluation and possible replacement.

  • Ipod will not update!!! Error (-50)  HEEEELLLLLLP!!!!!

    My ipod will not update to manual when I click the box to update manual. The box under is checked as it should be but after about 40sec of "Updating Ipod" an error box pops up and says "Ipod could not update unknown error (-50)". In addition I am no longer able to play the songs from my ipod through my comupter. I am only able to play songs on my computer already through itunes. Please help.
    HP 2225   Other OS  

    im getting kind of the same problem. i got a new computer with vista on it, and i plugged in my ipod with all the songs on it, and i thought if i set it to put all the songs on my computer it would erase the ones currently on it. i started getting alot of errors saying there wasnt enough space on my 8gb nano, which there should have been enough space but since it wasnt deleting the music already on it.
    after trying a few different setting i decided to try the restore button and it said it couldnt restore. so i closed itunes went to computer and into my ipod, enabled it so i could see hidden folders and then deleted all the F1, F2,F3 and so on folders and tried an update and it worked.
    but something really strange then happened in itunes, it was on my purchased playlist instead of having just my purchased music it had three copies of all my purchased music, but there wasnt three files of each. itunes did this on my previous computer but it made new copies of the files.
    it then worked just like it did on my old computer, but i noticed it wasnt working properly went i got all the album artwork and my new purchased music. now i dont really know what to do, do what i did before and delete the music manually or just wait untill the update in a "few weeks"
    i hope this has been helpful to anyone else with similar problems.
    dell e520   Other OS   windows vista

  • HT1923 My itunes will not update, and i got a message saying that MSVCR80.II is missing from my computer.  Try reinstalling.  When i try, i get Sevic apple mobile device failed, verify your priveledges with ignore, retry and abort. Still wont download.

    My itunes will not update.  I get a message that is saying that MSVCR80.II Is missing from your computer,   Try reinstalling to fix this problem.  So when i tried to reinstall, it says itunes was not installed correctly.  Please reinstall error 7 (windows err 126)  Then when i tried to reinstall i get this....Service applemovile device failed to start.  Verify that you have sufficient priveledges to start service...the I see  abort, retry and ignore....when I hit retry, it sill fails and i get the same message again.  How do I fix it?  Will I lose all my music if I delete it all and reinstall itunes?  I haven't tried that yet.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • No matter what I try, Camera Raw will not update from 8.3 to 8.4.1 in PS CC

    I've tried completely uninstalling Bridge and Photoshop CC and reinstalling and I'm still on Camera Raw 8.3.
    It just will not update.
    I also tried the link to manually install and it just says the patch is not applicable.
    Any ideas why even after completely removing and reinstalling both Bridge and Photoshop my Camera Raw will not update?
    Thanks

    When I replied to your post, I was replying to an original post that came in via my e-mail today at 2:30 and was the most recent thing in the ACR forum and had remained unanswered for 1.5 hours, so I decided to reply.  Had your post been put in a forum I subscribed to and happen to notice days ago, then I might have seen it, then, but didn't see it until this afternoon, and the e-mail version of your post only had the scant initial information, not the subsequent question and answer about your OS that you'd replied to on the other forum.  So as you say, I had not read the thread, because it was on a forum I didn't subscribe to.  So be shocked and perhaps awed as is necessary.  My treat.
    Second, I did make a typo when I said Win8/8/8.1 and it should have been Win7/8/8.1, which might have been deduced by the repeated 8, so you could have asked for clarification.
    Seeing as you're on Windows 7 which ACR 8.4 should be compatible with, one minor detail is that I see in the compatible Lightroom 5.4 requirements that it needs Windows 7 Service Pack 1, which would mean you'd want to be caught up on your Windows Updates, which I would assume you'd be.
    There are direct links to ACR 8.4(.1) on Jeff Tranberry's blog that are distinct for PS-CS6 and PS-CC so maybe that is what isn't right?
    Keeping Photoshop Up-To-Date
    You might check what version of PS-CC you have.  14.2.1 is the most current, and maybe that is prerequisite to ACR 8.4.1, I don't know. 
    If worse comes to worse, uninstall everything Adobe, then run the CS Cleaner then re-install CC Desktop and see what happens as you install PS-CC and it's updates.  It may need to be run several times.
    Once you're ready to retry your installs, you also might try to Quit CC Desktop and run it As Administrator in case there is a permissions issue.
    The CS Cleaner can be found, here:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • So, my ipod touch is running 5.1.1 and is slow and sometimes unresponsive. According to Apple it will not update to iOS 6. It is a 32GB, 3rd Generation. I want the new features but it's making me mad. I do not want to jailbreak. HELP?!

    So, my IPod touch is running 5.1.1 and is slow and sometimes unresponsive. According to Apple it will not update to iOS 6. It is a 32GB, 3rd Generation. I want the new features but it's making me mad. I do not want to jailbreak. As this would void my device from Apple. I love the features iOS 6 has to offer but I don't want to put out anymore money. IPods are expensive enough, Should I use blobs? Or would that make my device worse. Plus I do not want to pay $20.00 for a chat and have to wait all day to someone who I can't understand on the telephone. someone help me please.

    For the slowness:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • HT1926 my itunes will not update due to an error message saying cannot find itunes.msi

    I need help to resolve the fact that my computer will not update. It gives me a message about 95% way through the update that it cannot find itunes.msi and I also went to just uninstall the program completely off my computer and it gives me the same message. Help please!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Acrobat 9.5.1 Will Not Update

    Hello!
    I am running Acrobat 9.5.1 on Windows XP.  The program runs fine - but it will not install the next update.  When I try to update the program, it indicates that the patch package could not be opened and gives the error number of 1635.  What can I do next?  I don't recall that I have the installation disks - so I can't re-install the program.
    Thanks!

    You should do the install as the administrator and with anti-virus disabled. Usually the error indicates the patch could not be opened (may be corrupt or not in an accessable folder -- using the administrator might help here). When this happens it is often best to just download the updates (but do a repair first with Help>Repair) from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and install them in order.
    There are instructions for downloading the install at http://forums.adobe.com/thread/1061905. However, you still need the SN. You should always backup your downloads to a CD or backup HD when you purchase such products. You should not expect the files to be around online indefinitely. Be sure you also record the SN for the future.

  • TS1702 I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

    I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

    Well, to paraphrase the old line, "What're you gonna believe, that email or your own lying eyes?"
    The first thing I'd recommend trying is to power down your iPad (press & hold Sleep/Wake until the red OFF slider appears, then slide it to shut down), and then boot it back up and try again. You're resetting a bunch of state signals by doing that and this simple action (the first of a series recommended by Apple in your Users Guide) will quite often clear up these sorts of problems.

Maybe you are looking for