Potential issues with this connection option
Hello guys,
I have a tape library that is located on campus but only connected to one FC switch. I have two redundant links to the switch and would like to load balance the load as much as possible. Does my layout look reasonable ? I hate connecting one switch to both Fabric A and Fabric B ..but that's all i have to work with. What's the worth that could happen ? Let's say 9134 melts down and loses its configuration ..fabric A and fabric B should not have issues because VSANs are unique on each fabric.
do you have separate FC port/HBA for the backup on host (dual channeled)? if so, you can keep your SAN traffic and backup traffic on different VSANs. Only backup VSAN would span across switches.i.e.
Fabric A - VSAN 10 for data, VSAN 11 for backup traffic
Fabric B - VSAN 20 for data, VSAN 21 for backup traffic
9134 will have only VSAN 11 and 21 configured. ISL between Fabric A and 9134 will allow only VSAN 11 and ISL between Fabric B and 9134 will allow only VSAN 21
Even otherwise, your approach seems best in the situation, to me. Just make sure that you configure ISLs and restrict VSANs across. Preferably layout your ports on 9134 such that fabric A and B do not get mixed up between ports groups (even though 9134 ports operate at line rate). This helps to logically keep things separate.
Similar Messages
-
I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?
What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now? -
Issues with my connection when gaming (Insurgency)
Hello,
I just bought the MSI GT72 2QE. I am very pleased with de specs like the Geforce GTX 980m and the i4710hq but there is an issue that is bothering me some days now. When i am playing my beloved game Insurgency, i get ping spikes all the time. So i followed up some instruction on uninstalling the Killer software suite and just installing the drivers when i encountered the next problem. My Killer Wireless-n/a/ac 1525 Wireless Network Adapter couldn't find the drivers in the 'drivers only' package. But i did my best to find other drivers and accomplished after 5 hours full of frustration. So that is done but still doesn't solve my problem.
I don't know what to do anymore and I'm starting to think that maybe my Killer Wireless-n/a/ac 1525 Wireless Network Adapter is the issue. Maybe this is a hardware issue. I contacted the store where i bought it and they will contact me in 48 hours with a possible solution but the guy said that after all my effort it seems like a hardware issue indeed. You guys are my last hope or my laptop will be gone for 3 weeks at the factory.
Video of ping:
nl.tinypic.com/r/ztisd1/8
I hope someone has the solution.
Excuse me for my incorrect English, it's not my native language.
Bye!Thanks for your reply.
I'm glad (and I'm not glad for the others..) that I'm not the only one. But it's not because there are more devices connected to my router because I am the only one now and I'm still having this problem while my other laptop doesn't have any problems at all. I've tried everything so far now. Resetting my router, restarting my router, reinstalled windows, reinstalled drivers, got rid of the software suite, turned off firewalls, virusscanners etc. Everything.
I thought it was only with Insurgency but it's also bugging me with Battlefield 4.
So i have tried and done everything i could find on every forum on the internet. Still I don't get the download/upload/connection I am used to when using wireless. When i am in my room, which is 10m away from the wireless router, my download speed is max 1200 kb/s where I would easily get 2300 kb/s. Also when playing online games I am having big issues with my latency/ping. It goes from 60 to 200 to 400 and back every 15/20 seconds. I also own a Asus laptop and I don't have any issues at all with the wireless connection. When I am in my room there are no problems at all. I am starting to think that the Killer Wireless adapter is just a f*cked up thing. I bought a laptop (GT72 with 980m) for €2300 but I am having all these issues with the connection. It makes me really frustrated.
Longer vid of ingame netgraph:
nl.tinypic.com/r/97mjae/8
I am hoping that there is something that solves my issues. I'm starting to think that another wireless network adapter from another brand is the only option. Is there an option to change the wireless network adapter on my laptop because I will if I can. This piece of sh*t needs to be replaced.
Bye -
Issues with WiFi connection to Deskjet 3545
Hi,
I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer, so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
3. Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.Hi @DmiBro,
Welcome to the HP Forums!
I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
I would recommend the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Iphone 4S issues with wifi connection related to 8.2?
I haven't had issues with this before and have had my phone for 4 months. Suddenly this morning I was alerted I am almost at my data limit and I still have 14 days to go! I noticed my phone wasn't connected to my home wifi! I tried to connect several times and it told me the password was wrong. I know it was right so I restarted my phone, router, and modem. I was able to connect but had to leave for work. When I got to work, I connected to the wifi as well in an attempt to not go over my data. My phone connects, then I look at it a while later, and it says 3G again. I googled the issue and found a lot of people talking about the same problem but it all seems to be from last year. Anyone else having this problem suddenly? I have Sprint.
Hello Elita One,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iPhone is dropping different Wi-Fi networks after being connected, I'd like you to please reset your network settings by following the directions outlined below.
Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Have a good one,
Alex H. -
My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr........... -
After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Issues with ODI connection to Hyperion Financial Management
Hi,
I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
Thanks,
SuYou will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
geeo -
Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?
That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS. -
hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!
kaylsk1 wrote:
udated and its on 10.6.8 yet still no change
Your signature in 1st post was 10.8.2.
You went backwards?
Did you reformat and reinstall when you first purchased it?
If not I HIGHLY recommend you do that before you do anything else. -
I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.
P.S. Site is http://www.coldwatercreek.com
-
Part 2: Flat files and Business Contents: Any issues with this scenario?
I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advanceHallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike -
Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan HoedtDoes the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB -
Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)
Maybe you are looking for
-
Why can't i print a pdf it says it is a secure document??
i'm trying to print a PDF form to apply for tri care every time i try i get grey areas with none of the questions or any of the stuff i filled out !
-
Hi... I have tried to use more than 2 MB memory (using memory blocks) on FPGA. During compilation Xilinx tool chain generated error "AR #21955"....which is explained as memory limitation (in xilinx website). Can't we create memory blocks of more than
-
How to validate that only one check box is checked in detail block
Hi All, I am using oracle Forms 10G on windows. I need help on how to validate that only one check box is checked in detail block. I have multiple records in the detail block and I have check boxes for each record in the detail block. I have a button
-
Fails when executing job called syspolicy_purge_history (SQL Server 2012)
Hi friends i have the following problem The job syspolicy_purge_history of my database engine failed, specifically on the third step called "Erase Phantom System Health Records" that executes a powershell. This is the sentence that executes (All j
-
Can i open PAGES file on MS WORD 2003 (PC)?
i type my documents on my iBook's PAGES and i wonder, would i be able to open all these docs on the conference room's PC laptop running windows XP (MS WORD 2003) without me carrying the iBook to work i plan to bring the file i saved with PAGES on a f