Potentialy serious problem with Oracle 11g R1

Today i have download to try Oracle 11g , my system supports database system
requirerments and into installation progress my antivirus software find some troyan horses and my antivirus software is ordinary not powerfull .Do someone have the same problem?

Yes, Trojan found in ott.exe. I believe this may be a false alarm because of its filename, which is the name of a known malware. Only some antivirus detected it.
Since it's just one file, use whatever your antivirus has for isolating it, or just delete it.

Similar Messages

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Tns problem with Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools

I installed the full
Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio
now I am at the good old "[ORA-12154: TNS:could not resolve the connect identifier specified]" error.
I copied the same tnsnames.ora as used on the db server
onto the client "C:\Oracle\product\11.1.0\client_2\Network\Admin".
The host name is right since a normal ping works. TNSping is not available.
but I get the [ORA-12154: TNS:could not resolve the connect identifier specified] error.
The listener is running and the instance as well since it all works on the source server.
I tried it with
SET path=c:\oracle\product\11.1.0\client_2\bin
but tnsping is still not recognized.
sqlplus works on the other hand when I set it to
SET path=c:\oracle\product\11.1.0\client_2\
what is going on...

hey
u can post your query here, and i think everyone here is to share opinion so do not hesitate to do so and please try to google before posting here,
and we know no one is expert like some people saying 'boring questions' you just try to overcome your problem and you will definitly get your problem solved .
some mpeople ar still there who answeres hopeless questions and say nothing about them but when a fresher askin a qustion is not tolarated by them they think everyone is born DBA here
they always tend to discouraging people here on forums,and i think they are vvolunteers to reduce crowd here on forums, inspite of there experience and people respect them they can not control their anger
so please post you tns here, i think there are ways to ask people to google and search docs first, but not like this
thanks and regards
VD
Edited by: vikrant dixit on Jun 29, 2009 4:33 AM

Problems with Oracle 11g on Win2008 server

Hi all,
we changed our database 10g on W2K3 to 11g with Win 2008 server on weekend
Since yesterday we have problems with the database. On monday we had no problems.
The problems begun on tuesday. The assemly lines are connecting to the server with a tnsnames.ora, who placed on a networkshare.
here the tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\Oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
IFILE=M:\TNSNAMES\tnsnames.ora
ORACLE.MEKRA.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = caq01)(PORT = 1521))
(CONNECT_DATA =
(SID = qsys)
Every PC on the assembly lines has this tnsnames.ora and a connection to the mapping M:
Today we had already the same problem. Some PCs got a connection to the DB and some got suddenly no connection.
After 15 minutes diagnostics we stopped and started the db.
The PCs got after the restart a connection.
On the clients is the oracle client 10g installed, but I think thats not the problem.
I don't know whats the problem can be.
I hope you can help me or have some idea's?
The TNSnames.ora on the server:
# tnsnames.ora Network Configuration File: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORALB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.188)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oralb1.mekra.net)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
The first problem we solved yesterday, we had two oralb1 entrences in the dns as static.
One of them we deleted.
The dns should be not a problem now.
an idea? I hope so....
thanks for reading.
bye

852138 wrote:
Hi all,
we changed our database 10g on W2K3 to 11g with Win 2008 server on weekend
Since yesterday we have problems with the database. On monday we had no problems.
The problems begun on tuesday. The assemly lines are connecting to the server with a tnsnames.ora, who placed on a networkshare.
here the tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\Oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
IFILE=M:\TNSNAMES\tnsnames.ora
ORACLE.MEKRA.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = caq01)(PORT = 1521))
(CONNECT_DATA =
(SID = qsys)
Every PC on the assembly lines has this tnsnames.ora and a connection to the mapping M:
Today we had already the same problem. Some PCs got a connection to the DB and some got suddenly no connection.There must be some clue .. a tns error message ...
>
After 15 minutes diagnostics we stopped and started the db.
The PCs got after the restart a connection.
On the clients is the oracle client 10g installed, but I think thats not the problem.
I don't know whats the problem can be.
I hope you can help me or have some idea's?
The TNSnames.ora on the server:tnsnames is used only by client processes. When you say "on the server" are you talking about the one pointed to by the IFILE in the local tnsnames shown above? If not, if this just happens to be the tnsnames on the database server, then it has no bearing on your problem.
# tnsnames.ora Network Configuration File: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORALB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.188)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oralb1.mekra.net)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
The first problem we solved yesterday, we had two oralb1 entrences in the dns as static.
One of them we deleted.
The dns should be not a problem now.
an idea? I hope so....
At a previous employer we used a shared tnsnames file. It was not on the db server but on a file server, specifically for shareing. Occasionally there would be an issue with the network connection to that file server, or our dimwit SA would change the sharing permissions. Of course he claimed there was no issue on his end and I had to take my own network traces to prove it was.
thanks for reading.
bye

Problems with Oracle 11g XE R2

Hi guys,
I've got a problem and try'n to solve it for abt a week now and tried many solutions.
My enviroment:
Windows 7 Professional SP 1 64-Bit
AMD Phenom II x4 940 @3.0 GH
4 GB RAM (In Usage while installing 40%)
Windows-Firewall is activated (but oracle.exe and lstnr.exe are configured as exception)
avast! Free Antivirus Version 2014.9.0.2018
Installation (both times with same outcome):
Installed O 11g XE 64-Bit in two different ways:
User I was logged in with is in Admingroup
Started installation via rightclick with administrationprivileges
I activated the administrators account and logged in with adminprivileges.
After that I've installed the 11g XE 64 bit
between both steps I cleaned everything up and restarted my system, registry was empty too and folder was deleted manually
at first I get this problem: Windows cannot find "http://127.0.0.1:%HTTPPORT%/apex/f?p=4950"
-> Manually changing %HTTPORT% to 8080
--> now I could doubleclick the shortcut, Firefox/IE/Chrome opens but 404 not Found-Error is returned
- OracleServiceXE, XracleXETNListener both are running
[code]
C:\Windows\system32>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 04-NOV-2014 18:02
:56
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=D³rsinKurt-PC)(PORT=1521
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date                04-NOV-2014 13:53:50
Uptime                    0 days 4 hr. 9 min. 9 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\D³rsinKurt-PC\list
ener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=D³rsinKurt-PC)(PORT=1521)))
The listener supports no services
The command completed successfully
[/code]
so Listenerservice is up and running but I cant find the http 8080-Service with netstat -a
so I started investigating a bit more:
Registryfolder: HK_LOCAL_MACHINE\SOFTWARE\ORACLE is installed
following subdirectories are installed: KEY_XE, ODP.NET, OracleMTSRecoveryService
What I tried (both ways, starting with and without adminstrationprivileges):
I created two new DWORD-Values in KEY_XE ORACLE_SID_AUTOSTART and -SHUTDOWN both with the value True and stopped and started the services, nothing changes.
Inserted both users (Administrator and normal User) in ORA_DBA-Group, nothing changes, even tried to turn it off and on again
wanted to connect to sqlplus via console:
C:\Windows\system32>sqlplus system
SQL*Plus: Release 11.2.0.2.0 Production on Di Nov 4 18:09:21 2014
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name:
when I start the sqlplus-prompt directly and write the command startup I get the following msg: ORA-01031: insufficient privileges
I looked into the ORA_BASE-Folder and looked at the oradat folder, it contains a XE-Folder which is empty, the admin-folder contains: XE/ and adump, dpdump and pfile, all three are empty (what does this mean? No DB at all created?)
I watched the ORA_HOME-Folder and found initXE.ora, oradba.exe, oradim and PWDXE.ora
I looked into the oradim.txt-Log:
Tue Nov 04 11:21:17 2014
C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe -shutdown -sid xe -usrpwd * -shutmode immediate -log oradim.log
Tue Nov 04 11:21:55 2014
ORA-01012: not logged on
Tue Nov 04 11:23:01 2014
C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe -startup -sid xe -usrpwd * -log oradim.log -nocheck 0
Tue Nov 04 11:23:38 2014
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file 'C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) Das System kann die angegebene Datei nicht finden.
--> bingo, 1st Issue: there is no spfileXE.ora, how can I create this? plus in the dbs-folder there is only a init.ora and no initXE.ora?
Looked into the log-Folder 5 files starting with clscX.txt (probably after every systemreboot? containing the following:
Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.
2014-11-04 13:53:52.197: [ default][5576]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[    CLSE][5576]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system couldn't find the file.
-> Systemlanguage is german, so I've translated the german parts, maybe there was smth lost in translation
--> 2nd Issue: Is there any regkey missing?
further I watched the folder ORACLE_HOME /server/config/home cloesly:
cloneDBCreation:
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-01012: not logged on
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora";
ORA-01031: insufficient privileges
CloneRmanRestore:
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora";
ORA-01031: insufficient privileges
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ERROR:
ORA-01031: insufficient privileges
SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\cloneDBCreation.log
PostDBCreation:
QL> connect "SYS"/"********" as SYSDBA
ERROR:
ORA-01031: insufficient privileges
SQL> set echo on
SQL> //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\fast_recovery_area';
SP2-0103: Nothing in SQL buffer to run.
SQL> begin
2      dbms_xdb.sethttpport('8080');
3      dbms_xdb.setftpport('0');
4 end;
5 /
SP2-0640: Not connected
SQL> create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';
SP2-0640: Not connected
SQL> shutdown immediate;
ORA-01012: not logged on
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-01031: insufficient privileges
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql;
SP2-0310: unable to open file "C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql"
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmsclr.plb;
SQL> DROP PUBLIC DATABASE LINK DBMS_CLRDBLINK;
SP2-0640: Not connected
SQL> CREATE PUBLIC DATABASE LINK DBMS_CLRDBLINK USING 'ORACLR_CONNECTION_DATA';
SP2-0640: Not connected
SQL> CREATE OR REPLACE LIBRARY ORACLECLR_LIB wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 16
20 51 8d
21 L/XXXXXXXXXX...
22 XXXXXXX...
23
24 /
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRParamTable;
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRType;
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE DBMS_CLRType wrapped
XE :
Instance created.
So hopefully thats enough Information
thank you in advance
Dürsin Kurt

OK guys I've found it out:
Problem was, the XE.bat-Script couldn't add me to the ORA_DBA-Group.
Reason: my Computername and my username, both had a vowel mutation "ü".
Reason it didn't work at my business-laptop too, both have my "Ü" in the username
solved!

Problem with oracle 11g XE restore is destroyed. Can I use the datafiles to restore information?

Hello,
My home machine (win 7) suffered from hardware failure.
My backup seems to be unusable.
Fortunately I had the data folder on a separate drive so all my database files are safe.
Is it possible to install a fresh 11g XE and use the database files to restore the data?

>> but the tablespace is totaly empty
That is what REUSE does when adding a datafile.
When datafiles from an old instance are available, they can be added to the instance by recreating the controlfile(s), either a) adjust the CONTROL_FILES parameter to point at new filename(s), or b) just move (or remove) all the instance controlfiles, shutdown immediate; startup nomount, do the CREATE CONTROLFILE ... ; DDL, alter database open resetlotgs; and recreate the tempfile(s).
See the post How to and when to recreate control files. for a nice how-to.
Basically the create controlfile steps bring the old instance back to life (aka reincarnate). The important bit can be had by doing an alter database backup controlfile to trace; as mentioned in one of the comments, trace file with the DDL is created in the instance trace folder with the create controlfile... and other bits of info.
One caveat, if the instance was open datafile recovery is required before opening the database, and will require the archivelog files to redo committed transactions and rollback uncommitted transactions. If the instance was not in archivelog mode, the old redo logfiles *might* have enough info for the recovery. Or they may not- that is a risk of noarchivelog mode.

Isqlplus with oracle 11g

Sir,
I m having a problem with oracle 11g. I m having oracle 9i working is good with oracle 9i but from my installation of oracle 11g i cant find the url of isqlplus. can I work with browser in 11g or not for queries.

Hello,
can I work with browser in 11g When you install Oracle 11g you have also APEX (this is a new feature) which is an Application to develop and deploy Web Interface:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b32258/start.htm#BEHFIBJD
http://www.oracle.com/technetwork/developer-tools/apex/overview/index.html
More over, from the URL of the EM Database Controle Home page you have a Link to open a SQL Worksheet.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Oct 10, 2010 3:38 PM

A lot of problems with Oracle BI SEE 11g

I have a lot of problems with Oracle BI SEE 11g
1. I upgraded my BI SEE 10 repository and can it openning in offline mode.
2. I can't deploy my upgraded repository in EM MW Control 11g - when i try to open Farm_bifoundation_domain->Business Intelligence->coreapplication, i get error "Stream closed
For more information, please see the server's error log for an entry beggining with: Server Exception during PPR, #41".
Opening Logs by EM control doesn't work too.
in file middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log i see this event:
<Error> <HTTP> <oratest.itera.ru> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <b639ac3e56e9a463:bd6fa7f:12ac7271e09:-8000-00000000000009e8> <1283408423378> <BEA-101019> <[ServletContext@329875093[app:em module:/em path:/em spec-version:2.5]] Servlet failed with IOException
java.io.IOException: Stream closed
Have you any ideas?
3. Ok, i taking sample repository and adding a new datasource in it:
Database: Oracle 8i
Connection pool:
Call interface OCI 8i/9i
Data source name:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = oraapp) (Port = 1521) ) ) (CONNECT_DATA = (SID = MYSID) ) )
This settings are working fine in BI 10.
In BI 11g i get this funny error: "The connection has failed". I lost my time in attempts to connect to Oracle DB 8, but have not results. After that i hacked button "Query DBMS" at "Features" tab, pressed it and when get error "ORA-03134: Connections to this server version are no longer supported.".
Therefore Oracle 8 DB as datasource not supported. Am i right?
4. In sample repository i added oracle DB 10 as datasource, then added two dual tables and their connection to all layers.
Now i open BI Answers, and trying to create report with one dummy column, Now i have this error:
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42016] Check database specific features table. Must be able to push at least a single table reference to a remote database (HY000)
SQL Issued: SELECT s_0, s_1 FROM ( SELECT 0 s_0, "ORA10G"."dual"."dummy" s_1 FROM "ORA10G" ) djm
Database features are defaults.
Does anyone solve this problem?

Turribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44

Error Intall RWD Uperform 4.3 on Windows 2008 with Oracle 11G

Hi,
I need install RWD Uperform 4.3 on Windows 2008 with Oracle 11G.
When tried install Uperform 4.3 occurs the next error:
Product: RWD uPerform Server -- This Release requires Oracle 11.2 R2 ODP Client to be Installed.
If you are not using Oracle, please use the regular 4.30.0 release.
If you are using Oracle, please install ODP.NET and then re-run the Setup. Setup will be aborted now.
I installed the ODP.NET whit the version 11.2.0.2.
But the errors still occur.
Thanks.
Marco Kolombesky

In the end I solved my problem.
But I installed RWD uperform 4.4 (not 4.3).
But I think that the problem was that when I installed uperform 4.3 I didn't run this command at DB level on my SQL Server datadabe:
ALTER DATABASE AdventureWorks2008R2
SET READ_COMMITTED_SNAPSHOT ON;
GO
Regards
Matteo Stocco

Help me please : Serious problems with collection-mapping, list-mapping and map-mappi

Hi everybody;
I have serious problems with list-mapping, collection-mapping and map-mapping.
Acording to specifications and requirements in a system I am working on it is needed to
get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
ORACLE 9i AS and ORACLE 9i JDEVELOPER.
I tried to map a master-detail relationship in an entity-bean, using list-mapping.
And this was very useful in order to get a "list" of details, ...but, when I wanted
to get a single value I have some problems with persistence, something about "saving a state"
despite I just want to get the value of a single detail.
I decided to change it to map-mapping and the problem related with a single detail
worked successfully, but I can get access to the whole bunch of details.
May anyone of you help me with that?
I am very confused I do not know what to do.
Have any of you a solution for that problem?
Thank you very much.

Have you tried a restore in iTunes?

Pro*C with Oracle 11g

Hi !
I didn't find a forum specific to pro*c, so here i am because i was told this forum had a bit of pro*c activity....
I've downloaded Oracle 11g and recompiled our applications using pro*c
We currently precompiling without any problem our sources against Oracle 7, 8, 9, 10.
With Oracle 11g, it doesn't work !
every EXEC SQL followed by a command works.
every EXEC SQL followed by a query generates the same error.
Example :
char *oracle_date_courante()
static char buf[SIZE_ORADATE+1];
EXEC SQL SELECT sysdate into :buf from DUAL;
if(ORA_SQLERROR())
oracle_error("sélection date courante");
buf[0]=0;
return buf;
PRO*C output :
Erreur Ó la ligne 105, colonne 2 dans le fichier src\oracle.pc
EXEC SQL
.1
PLS-S-00000, SQL Statement ignored
erreur sÚmantique Ó la ligne 105, colonne 2, fichier src\oracle.pc:
EXEC SQL
.1
PCC-S-02346, PL/SQL a trouvÚ des erreurs sÚmantiques
So, we investigated... And found that thoses errors come when we use the option sqlcheck=semantics.
If we use an inferiour check level, it works but because we use PL/SQL keywords, pro*c prints errors and wants us to provide the 'semantics' sqlcheck level !
So, it's a vicious circle !
Any ideas ?
Thanks...
Vincent

Adding the option common_parser=yes removes the errors !
But brings errors linked to the PL/SQL parser such like
CSF-S-00000, ORA-06544: PL/SQL : erreur interne, arguments : [55916], [], [], []
1>, [], [], [], []
1>ORA-06553: PLS-801: erreur interne [55916]
Really vicious..and still not precompiling !
By the way : Server is 10.2.0.1... and i guess thoses errors are normal since the common parser is not available in this version...
So bye bye option common_parser and i'm back to my orignals errors.
Message was edited by:
Vicenzo

Oracle Tuxedo 8.1 With Oracle 11g Database

Hi,
I have an old application that must be compiled with oracle 8.1 and Oracle9i Database.
We are migrating to Oracle 11g Database, and now we have some inssues to compile with Oracle 11g Database. For example some Libraries that the Tuxedo XA Resource Manager needs from the Oracle Database, that just u can found on older versions like Oracle9i (kpudfo.o file).
what can be the solution for that problem?
An Oracle 11g database config or a Tuxedo config ?

Hi,
When you say "Tuxedo XA Resource Manager" I'm not sure what you are referring to. Do you mean the Tuxedo transaction management servers (TMS) servers that are built with the buildtms command? If so, if there are linking errors, it has to do with either your library paths or the RM definition for Oracle Database in the $TUXDIR/udataobj/RM file. Tuxedo itself only uses the XA switch from the resource manager such as Oracle database. Now the resource manager may require a bunch of libraries, which is why I suggested you check your library path. If the above doesn't help, can you post the error you are getting and what is generating/creating the error?
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Can OBIEE 10.1.3.4 work with Oracle 11g 64bit?

I Installed Oracle 11 g 64bit with JDK 64bit on my windows 7 Home Premium 64bit machine . After this i installed OBIEE 10.1.3.4 .
Now OBIEE needs 32 bit JDK.
How do i solve this?
Can OBIEE 10.1.3.4 be used with oracle 11g 64 bit edition??

First i installed Oracle 10g on my windows 7 home premium 64 bit .
Then i installed OBIEE 10.1.3.4 on my machine
But then there were some problems cropping up and i wasn't able to use OBIEE 10.1.3.4 with windows 7home premium 64 bit machine.
I then removed both oracle 10g and OBIEE 10.1.3.4 from my machine.
Then i installed oracle 11g 64bit and then OBIEE 10.1.3.4 . But again it dint work
Can anyone help?

Serious problem with my iPod Classic/iTunes

I have a 6th Generation iPod classic (80 GB), and recently, I have been having some serious problems with it.
When I connect it to iTunes, there is usually no problem, it shows up, plays and displays the music correctly, etc. However, if I try to ADD any music to it, iTunes will freeze, then close, and within 5 minutes, my entire computer will freeze completely, and be shut off. For whatever reason, happen when my iPod finally disconnects because my computer turned off, all of my music is missing from the library (This doesn't happen every time it freezes, because I try to disconnect my iPod manually before everything freezes). The music is still on the iPod, (it says that I have XX.X GB of "other" instead of music/videos), but it doesn't show up. When I plug in my iPod, iTunes says that there was a problem and I need to restore it. The first time this happened, I lost over 5,800 songs, but I forgave Apple, because these things do occasionally happen, plus I had no idea what exactly went on. The SECOND time happened within the same week, after I had put 800 songs back on the restored iPod. The first time happened when I was using iTunes 10 (which is seriously buggy on my computer, and freezes often), so I switched to iTunes 9 (still buggy, but doesn't freeze quite as much), and the same thing happened. So now I'm thinking it's my iPod's fault. My iPod does a whole host of minor problems over time such as making certain songs cut off at a certain specific point for no reason (Always the same song, always the same cut off point, and I can't fast forward past it, I also can't delete the songs because if I highlight them on iTunes, iTunes will freeze, and if I find them under the music folder in iPod control, my computer will freeze), freezing the entire iPod for seemingly no reason, and somehow messing up my album artwork (it will appear as "Colourful Static"), along with alot more.
I know this is a troublesome problem, but if anyone could somehow shine some light on this problem, it would be tremendously appreciated.
Thank you
-Eric Luna

Unfortunately, when a hard drive starts clicking that means it's going bad. The mechanism is having trouble reading the drive. Since the iPod is mostly just a harddrive and a battery I have a feeling that this is your problem.
watch this video. http://www.youtube.com/watch?v=wMm6c3fr-fU
about 25ss in is where the clicking starts. If it sounds like that, but softer and more muffled since it is a smaller drive that is being enclosed then I think you might be SOL. Maybe if you're iPod is still under warranty you can get a credit and go for a touch and avoid moving parts all together?

Apple Have Serious Problems With 10.7.5

Apple have very serious problems with their software and they do not have the courage to openly admit this to their customers. My company has been dedicated to Apple and all that is good. We have 2 Imacs, I macbook Pro, 1 mac Mini, 1 mac mini server, 1 ipad, 4 iphones and peripheries. I am on the verge of placing them all on a heap and putting a sledgehammer to them all because I am certain that 10.7.5 is such a corrupted release that even Apple technicians cannot help. My company has been on more and more get around fixes that are becoming more and more complicated by the minute. For the last 4 weeks I have been working 8 to 8 daily including some of the weekends to try and fix things. I have had the pleasure (genuinely) of working for two days following a knowledgeable Apple Technicians instructions to resolve a cloud issue and as of today I sit with one imac completely unusable with all sorts of errors and malfunctions - all software based. Other symptoms on other hardware include error messages saying the computer restarted due to a problem with the computer - even though we are carrying out clean shutdowns or restarts; inconsistent acceptance of passwords to i cloud on most equipment but in particular as highlighted above; nearly all applications opening on restart (I do know how to shut that off - in theory!!!!!!!); frequent and very lengthy beachballs; keychain is an absolute mess, slowdowns to the extent that I have to work on three machines to get the minimum of work done; and other random malfunctions or error messages. Apple's positive attitude to its customers used to be second to none. It seems to me that software (and hardware) releases are now too rushed and Apple do not care about software failures but rely on customers to troubleshoot the glitches for them and do so under warranty or more likely care plan support at further cost to the customer.
Just look at all the questions being asked by customers via web searches on the above issues and more. Lots of questions, no reliable fixes, and certainly no interest shown by apple to resolve the issues - in fact Apple have adopted the say and do nothing approach.
I love the products and have been a loyal ambassador to Apple but now my stress level, and the inability of my company to engage its business put me on the verge of taking every item my company owns with an Apple logo and at least gaining some satisfaction by placing them all in a heap and smashing the lots with a sledgehammer (deliberate repeat as this is now a realistic option)
It used to be a pleasure to use the products, and efficient. I am not looking for help on these matters as an Apple technician is working very hard with us but I feel he is as frustrated as us. We are nowhere nearer resolving our problems and almost daily there are other glitches emerging.
Apple are losing their way. They must listen to the directions given them by their customers frustrations.

What happens when you click the button?

Potentialy serious problem with Oracle 11g R1

Similar Messages

Maybe you are looking for