Potoshop's tools and windows disappears with Leopard's Spaces.

Dear friends,
I was having very annoying problem with PS CS3 and spaces. Interface disappears when you focus a program that is on other space. This was with Photoshop CS3 and Flash CS3 trials. I'm very sad about this. Instead of optimizing the process its actually making it more annoying. For photoshop I used "tab" key twice to hide/show the interface, then it gets back. For flash, F4 does the same thing. But it's annoying.....
Mac Pro 2 x 2.8GHz Xeons with 2GB RAM.
I've seen a couple of guys having the same thing. Anyone found a solution?
Thanks.

I've noticed that same issue if I use the dock icons to act as application/space switchers but only on Adobe apps most notably Photoshop but occasionally Illustrator too it seems. I've adopted a different solution which seems to solve that options bar/tool box disappeaing act. In System Preferences/Exposé there is an option to use hot corners. I've assigned Spaces to my lower right corner. Flicking my cursor to that corner gives me a graphic image of all my spaces and windows open in each. In that image I can select my Photoshop space and don't experience the interface disappearing issue.

Similar Messages

  • I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem

    I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem?

    Did you go through all the options?
    Also this:
    Also, third-party security software may conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that may be caused by your security software. After resolving any issues you may have with your security software, you may need to try the steps in this article again.

  • I have an issue with the tabs and windows disappearing....?

    I have a constant problem with Firefox now. I notice that with Firefox 4 and 5 there has been a reoccurring problem with the tabs and windows closing on their own. If I have more than one window open, one of them will suddenly disappear and I wont see the tab at the bottom anymore until I click out of the one I am currently on. It is very annoying and only when I get out of Firefox completely will it sometimes reappear. Even more frightening is the fact that when I move the mouse downward to the bottom of the page the page shuts out as if I clicked out of it.
    I am wondering if this is a security issue meaning some type of malware or virus that is manipulating my browser or is this a common issue that has some unknown cause? I would like to know what the cause is and how it can be fixed because it annoys me all the time. Please help!!

    No Issue with the voltage in general. iPad is being charged via USB.
    1. If you connect it directly to the computer - no problem.
    2. If you want to charge it directly from the power socket you will need this:
    http://store.apple.com/uk/product/MB706B/B/apple-usb-power-adapter
    TZ

  • HP Protect tools and windows 10 (HP 6930p)

    Now that windows 10 is upon us... i want to ask a few simple questions. I know that HP will say that it doesnt support windows 10 for the 6930p because of yada yada yada... but windows 10 is now available for any windows 7 device and that includes the 6930p that comes with windows 7 support. So the way i see it, anyone with windows 7 should have windows 10 support. so will HP release the drivers to support windows 10. i ask this important question because i ran a seperate hard drive to test windows 10. On it, it told me to remove HP protect tools, my encryption (sounds like communism doesnt it?), and Display link. because i like HP Protect tools and the set up of my computer... i do not understand why it would force me to remove these. so after doing some searching, i noticed there are updates to protect tools but i want to ask will these updated versions support windows 10 and if so can someone post a link.  Thank you

    Yesterday, I gave a try by installing the same software ( compatible for 8.1 ) sp63727.exe on Windows 10. After restarting it didn't show the finger reader option while login. Today, after login using password, the Protect tools pops up and shows the finger reader setting ( setting which was in Windows 8.1 before upgrade ) taken automatically, and asked to save the config. Now I can login using finger reader successfully. I am not sure Windows 10 updated any files automatically after findin the Protect tools. Give a try reinstalling the same sp63727.exe and update this thread.

  • HP Protect tools and windows 10

    Now that windows 10 is upon us... i want to ask a few simple questions. I know that HP will say that it doesnt support windows 10 for the 6930p because of yada yada yada... but windows 10 is now available for any windows 7 device and that includes the 6930p that comes with windows 7 support. So the way i see it, anyone with windows 7 should have windows 10 support. so will HP release the drivers to support windows 10. i ask this important question because i ran a seperate hard drive to test windows 10. On it, it told me to remove HP protect tools, my encryption (sounds like communism doesnt it?), and Display link. because i like HP Protect tools and the set up of my computer... i do not understand why it would force me to remove these. so after doing some searching, i noticed there are updates to protect tools but i want to ask will these updated versions support windows 10 and if so can someone post a link.  Thank you

    Solution to what, what exactly is your problem with Protect Tools and the upgrade process? No way anyone can help if you are not specific with your issues.

  • Compatibility of windows xp with labview and windows 2000 with labview

    I have a very weird situation that I am not sure even I can decribe it clearly. The thing is we have two set of equipments. One: windows 2000 with DAQ card, PCI card, the other is windows xp with same DAQ card and PCI card. All the labview software are the same version. All the program are the same. But the program on windows xp has a really weird problem. Sometimes, the signal is wiped out when I run the program and sometimes it doesn't. I am curious whether the two windows system have different order sequency. Is it clear? I am really sorry about the description since the problem is really strange. Thank you very much!

    With more research, I think I probably find the problem but I don't know how to fix it. Here is how the program work. In Calibrate LC.vi, there are four buttons of "set". When you hit set button, the program will aquire 10 data points which will form the signal we need. But the problem is when I hit set button, no signal at all.So I am thinking the program didn't aquire any data in. I uploaded the Calibrate LC vi and also the Aquire Data vi. Does anyone can give a suggestion how on to fix the problem? Also, I double checked the PCI card. The interrupt request for PCI 6036E in windows2000 computer is 19, that in windows xp computer is 21. Will this be a problem too? Thanks!
    Attachments:
    Acquire LC Calibration Data.vi ‏34 KB
    Calibrate LC.vi ‏108 KB

  • Dual Boot Linux and Windows problem with HDDRecovery

    Hello
    I`m using dual OS Windows Vista and Linux open SUSE distribution on Toshiba Satellite A350-10z, everything is working great except Windows Recovery. I have Linux (boot:dev/sda6) and Windows Vista (boot:dev/sda2). Windows has 2 partitions, Disk C and D, on Disc D i have HDDRecovery folder. After F8 i using the repair option and waiting, then the massage is displayed "The installed program cannot start. Click OK to turn off the computer".
    Before i installed Linux the Recovery worked fine. Is there a chance of using the HDDRecovery from Windows Disk D or i have to boot from Recovery DVD?

    In my opinion Linux has muddled up the partitions or MBR and possibly this is the reason why the HDD recover does not work seems the Recover DVD is your option ion order to set the notebook back to factory settings.
    By the way: I didnt install the Linux on my notebook but I use Linux using the Knoppix Live CD

  • Can I install on my MacBook Pro and Windows PC with the same account?

    Hello
    I have a Mac and a PC(Win), now I am thinking about purchase Creative Cloud, can I install on my OSX and Windows? Or I need to buy 2 license?
    Thanks you all.
    Michael

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • Spaces - Window disappears when I turn Spaces off

    After using Spaces for a while I decided it was not a feature I care for. I turned it off and found that every so often a window I am working in (so far Mail and MS Word) will disappear. It is not minimized in the dock but the application is still running. I can click on the application over and over but cannot get the window with my work back up. Closing Mail and re-opening will not bring back the window (my Inbox for instance). The only way to be able to work again is to re-activate Spaces then the application windows reappear. What's up with that?
    Message was edited by: Ronald Felton1

    I'm seeing the same sort of behavior.
    As I flip back and forth between spaces, every once in a while I come back to a space that should have a window displayed but doesn't. A closer inspection reveals that the application with the missing window is still active, and - if I can get to the app's Window menu - it still thinks the missing window exists. But, nothing I do will reliably make the window reappear other than to completely shut down and restart the app in question. Sometimes, the missing windows will appear if I shut down another app in a separate space, but this isn't reliable.
    I've seen this missing window behavior with multiple apps, including Finder, Terminal, Safari, Firefox, Timbuktu Pro, and others.

  • Mac and Windows showing different hard drive space remaining?

    Hello Guys,
    I am using my 1tb hard drive with mac and windows and while checking the space remaining, my mac says roughly 600gb left and my windows comp. says about 500gb left. I am just wondering which one of the storage remaining statements is correct and why they both show different numbers (by 100gb)? If it helps, this also happens to my 16gb flash drive. mac says 10 gb left, and windows says less space left (dont remember actual number, but was roughly 6-8).
    Just asking becuase I want to know why such a big difference in size remaining. Could it have to do with the way each OS sees what defines the harddrive as full?
    if it matters, my hdd format is MS-DOS (FAT32).
    Thanks a lot,
    krm1897

    haha its been 2 years. And no, i didn't figure it out, but i speculate it may have to do how Mac OSX and Windows reads the FAT file system (my tb hdd was FAT formatted so i could use it on both OS) and calculates remaining space.
    That may be right, or it may be completely wrong lol
    krm1897

  • Photoshop CS5 interface locking up and windows disappearing in OSX Mountain Lion?

    Hi,
    This has suddenly started happening to me using Photoshop CS5 on my mac running the latest version of Mountain Lion.  When I open a PSD file at first it doesn't appear to be there.  If I check under the "view" menu the interface says that the document is open.  If I use tab to switch between views, the document appears and the palettes on the right disappear. Tab again and the interface reappears around the document,  palettes are still gone but they are replaced by transparent grey blocks where the palettes should be.  I can't bring up any new palettes and I can't move the document window.  If I have multiple documents open, one remains in front even though the titles in the title bar change.
    I've reinstalled Java.  Unistalled and reinstalled Photoshop CS5 but nothing is working.  I've opened Photoshop CS3 and it works fine.
    Has anybody else expereinced this or have any idea what's going on?
    Thanks for any advice

    Hi Chris,
    No I don't have any utilities or haxies.  The only thing that I know I did before the issue was remove a trial version of Flash CS6 and I installed Flash CS3 (I was working with an old FLA and the new text tools in Flash CS5 were making editing difficult).  That's why I thought reinstalling Photoshop might help.  I thought perhaps I'd overwritten or removed an important file.  There have also been a few minor updates to the OS recently.
    I ran a diagnostic with tech tool pro and as far as it can tell the video card is good.
    Regarding Java: when OSX Lion came out users were required to download and install run time for Java in order for Adobe Products to function. Some of the issues seemed similar to what I'm experiencing. This is from adobe help: http://helpx.adobe.com/x-productkb/global/install-java-jre-mac-os.html

  • Problems with Labview and Windows XP with error -214721786​5

    Hello. Im a new beginner in Labview and am having a problem with a error message
    I dont understand. Im running Labview on a pc-logger with windows XP.
    The program is written by a guy on my university, and logs voltage from
    a solar cell panel. He doesnt have the time to check in to it, so Im supposed to
    find out what's wrong.
    The error message is as follows :
    Error -2147217865 occured at Cmd Execute.vi->DB Tools Insert
    Data.vi->Solcelle.vi
    Possible reasons :
    Exception occured in Microsoft OLE DB Provider for ODBC Drivers,
    [MySQL][ODBC 3.51 Driver][mysqld-3.23.38-log]Can't open file :
    'solcelledata.MYD'. (errno: 145). in Rec Create - Command.vi-
    >Cmd Execute.vi->DB Tools Insert Data.vi->Solcelle.vi
    I really hope someone can tell me what's wrong and specifically what to do
    with it, or possibly guide me to someone who could suggest a solution to this
    problem.
    Reguards
    chrisdee

    Hi Chrisdee,
          (.. not to discount what TimoS has suggested, however...) 
    Embedded in the error information you provided:
    ... Can't open file : 'solcelledata.MYD'.
    Sounds like the program needs this file?  Has the program been moved to a new location?
    just a wild guess!
    Cheers
    Message Edited by Dynamik on 10-06-2005 04:53 AM
    When they give imbeciles handicap-parking, I won't have so far to walk!

  • Photoshop CS6 Tools and Cursor Issues with Mountain Lion

    Am using Photoshop CS6 on iMac 27inch with Mountain Lion. Experiencing inability to use the move tool to place one image on another after extraction. I place the move tool on the previously extracted image and drag it into an new image, but the extracted image does not get placed on the new image. Also, cursor disappears frequently when using Photoshop for extended periods of time.
    Anyone having similar problems?

    The cursor disappearing is a well known MacOS bug affecting all applications.
    Have you installed all the updates for CS6?
    And are you dragging from the layers palette, or from document to document?

  • LWAPP upgrade tool and Windows 7 (64 bit)

    I know this tool does not have a version for windows 7 but the company foisted the OS off on me to "Test" It works fine with windows 7 32 bit but I have windows 7 64 bit.
    So, I was attempting to install and use the autonomous to LWAPP tool to upgrade an 1131 AP to LWAPP. I DL'ed version 3.4 which is the most current I could find. unfortunately, it gives me an error installing saying it could not read from the IPUT file and after installation it is convinced I already have a TFTP server running, which I do not. In addition to all that, when attempting to Uninstall the tool it says _SETUP.DLL is missing.
    With that information in hand I found the _SETUP.DLL on another machine I use and copied it over which resulted in no improvements of note. I did register the dll as well. Any ideas?

    I assume you are using the RTM (Release To Manufacturing) version. I would suggest, if possible, you might want to use the new XP Virtual PC feature (run XP on Windows 7), if the version of Windows 7 you are running supports it. I think the VM runs XP SP3 32-bit.
    http://www.microsoft.com/windows/virtual-pc/download.aspx
    You could also try changing the advance properties of the executable and indicate that it should be run in "compatability mode" of Windows XP 32-bit (I think that's an option, but my Windows 7 computer is at home)
    Whatever route you take, you will receive no support from Cisco in this configuration. If you can avoid it, it might be better to not do LWAPP upgrades with Windows 7 until something official comes out.
    petenugent - please be aware that Windows 7 was released to many people on August 6th. The general public release (of the exact same media) is due on October 22.
    http://windowsteamblog.com/blogs/windows7/archive/2009/07/21/when-will-you-get-windows-7-rtm.aspx

  • Cursor / window disappears with rxvt-unicode + xcompmgr + Xft font

    The issue described in this thread is still outstanding for a number of users.
    It seems to boil down to this: when using rxvt-unicode with xcompmgr and an Xft font (Liberation Mono, DejaVu Sans Mono, and Terminus were among those tested), the terminal cursor will disappear.  Typing some text and pressing backspace will cause it to reappear.
    Furthermore, the entire window sometimes disappears when switching workspaces in Openbox.  Repeated workspace switches or minimizing / restoring the window (via a panel, such as tint2) can make it reappear.
    A workaround is to set URxvt*cursorUnderline in ~/.Xdefaults, but some users prefer a block cursor.

    The suggestion of installing libxft-lcd was made.  I did so, commented-out the URxvt*cursorUnderline line in ~/.Xdefaults, logged out of X, and restarted slim from tty1.
    % ldd /usr/bin/urxvt | grep Xft
    libXft.so.2 => /usr/lib/libXft.so.2 (0x00007fd35f179000)
    % pacman -Qo /usr/lib/libXft.so.2
    /usr/lib/libXft.so.2 is owned by libxft-lcd 2.2.0-1
    After restarting slim, the problem persists.  After rebooting, the problem still persists.
    xterm does not exhibit this problem, nor does emacs.  I use both programs with libxft and blinking block cursors, and they both work as expected.  This seems to be an issue with running rxvt-unicode in combination with xcompmgr.  From my POV, it doesn't seem that intel drivers are to blame, but I suppose I wouldn't rule them out.
    Last edited by hexadecagram (2011-10-09 21:23:43)

Maybe you are looking for