Pouch for iphone 4 with bumper??

is there any sleeves or pouches available to put the iphone 4 in which has a bumber on??

Well, the lesson I learnt with the original iPhone, is to NEVER buy the specific dock for your iPhone - buy a universal dock, and then the adaptor plates to fit whatever you want to dock in it. That way you only have to spend £7 each time you get a new device, not £30 (or however much the proper dock is).
Plus, you can use the universal dock WITHOUT an adapter - in which case, your phone, in the case, will fit. It's not ideal, as your device won't have physical support (it'll be held up purely by the dock connector which could strain the connector and the port on the device), however my 3G in a case was used (unsupported) in such a dock every night for the past year with no apparent ill effects to either the phone or the dock. At work I also have a universal dock, but this one had some sticky foam pads added to it to give a bit of support. You might also find that the dock adaptor for an iPod classic will provide suitable support - they're a similar shape.
Having said all that, I really can't believe that only one company (that I've heard of) makes dock adapters that fit an iPhone with a case on. The whole point of the universal dock was that you could have plates that fit anything - and I'm really surprised Apple, never mind anyone else (barring the one company I can't remember) haven't capitalised on this opportunity to make even more money by selling bits of plastic.
Apple make dock adapters. Apple make bumpers. They really should be making dock adapters that fit the bumpers!
Message was edited by: Steamrunner TTT

Similar Messages

Pouch for iPhone 5 with thin bumper case

Hello Everyone,
I am looking to buy a nice pouch that would accommodate my iPhone 5 that has a very thin plastic cover around it.
With my previous iPhone 4S, I was using a Krusell Luna large size pouch which provided a perfect fit. The new Krusell Luna (size L long) and other Krusell pouches are narrower by 3mm, which means that they could be too tight for the iPhone 5 with the plastic cover permanently on it.
There is a pouch made by Spigen for the iPhone 5 but it will not accommodate the iPhone 5 with the thin plastic case.
Any suggestions for a pouch would be most welcome.
Thanks,
Brian

I've been using the Tuneband for some time now
http://www.amazon.com/Tuneband-description-Grantwood-Technologys-Protector/dp/B0 019FEZ88/ref=sr14?ie=UTF8&qid=1293545210&sr=8-4
If you've already got an inexpensive case, then consider cutting two slots in the back of your case. You can then use a velcro tool strap from one of the big box home improvement stores. It's an identical solution to the Tuneband except without the logo.

Looking for a good antivirus/antimalware app for iPhone 5 with iOS 8.1.2

As the subject implies, I'm Looking for a good antivirus/antimalware app for iPhone 5 with iOS 8.1.2. Don't care if it costs $$ just want something that works. I've been searching around and installed a couple things but they don't seem to be what I was expecting. Thought I'd find out what others are using.

Htown Rush wrote:
Thanks, the problem is I'm getting spam (spoofing) that is from me saying it was sent from my iPhone with my iPhone signature. Ive reset my password on my mail, but that's pretty sketchy either way. And it's being sent to my contacts as well. Trying to eliminate all the possibilities and this is my first iPhone so I'm still a noob.
Sadly, spoofing doesn't really require much hacking, All a spammer would need to use your email address for spoofing would be your email address. If it's also being sent to your contacts, your email account may well have been hacked. But that would have happened on the server level. Your phone wouldn't have been involved. Unfortunately, once the miscreants have your contact list, changing your password will not get that back. Changing the password to something strong may help prevent future misuse.
Best of luck.

Can applw make a new software for Iphone 3g with multitasking

can apple make a new software for Iphone 3g with multitasking

No. Apple stated that the 3G does not have the processing power to provide multitasking to Apple's reuired standards.

How much is the exchange for iphone 5s with a broken screen? in Brazil charged me R$ 999.00

How much is the exchange for iphone 5s with a broken screen? in Brazil charged me R $ 999.00

If the device has not been opened by anyone (other than Apple) then it can be replaced via the Out of Warranty replacement program, $269US for the 5, 5C, and 5S?
If it has been opened by anyone other than Apple, purchase a new device.

Launch image for iPhone 5 with Flash CS6

How do I add the required iPhone 5, 4 inch screen launch images to my build using Flash CS6. I have targeted Air 3.8 beta and there is no support for bundling the necessary images. Do I need to edit the plist or app descriptor xml file or something? Do Adobe plan to accommodate these new Apple requirments in a future version of CS6 or AIR SDK?
Up until now I have had no problems submitting binaries to the Appstore, but as of May 1st Apple reject any binaries that are not optimized for the 4 inch screen of the iPhone 5.
Thanks.

Hi,
Thanks for your effort!!!Did exactly the same, but no result.I changed the version number in Flash in the airsettings to 2.1, and also tried (1.1, 2.1. 1.0.1)After that, put another version ready to upload. Select this version in the apploader.And than it tells me: This bundle is invalid. The value for key cfkbunleversion in the info.plist file must contain a higher version than that of the previously uploaded version.
I do not want to update my app, but only the screens you see when buying the app in de store.And also the name of the developer. I changed my apple id from [email protected] into [email protected] thought if I run an update, the apple-id of the app will change.
(I am not sure).
Hope to hear from you.
Newspaper want a interview because it's a creative app from the city, now I hope it will work in time...App name is: jabenjibbe
Kind regards,Christa.
Date: Sun, 4 Aug 2013 20:56:45 -0700
From: [email protected]
To: [email protected]
Subject: Launch image for iPhone 5 with Flash CS6
    Re: Launch image for iPhone 5 with Flash CS6
    created by gdfsdrghdhdfhrthfghgfhgth in Flash Pro CC - General - View the full discussion
Hey Christa,
I'm not entirely sure what process you've gone through, but as far as uploading an update goes, it's much like uploading your original app. You need to go to iTunes Connect first and log in, go to "Manage Your Apps" and then click on the app you want to upload an update for. There'll be an option on the next page that says "Add a version". You then enter the information that you need to for the updated app and click on "Save". You'll then have the button you need to click on that says something like "Ready to Upload Binary" or something similar.
Once you click on that, you need to open up Application Loader and then upload your updated app through that. If you've entered the correct information in the steps above, you should be able to choose the new version number for your app from a list. You then just submit it like you did originally.
After that, you simply have to wait. It's not instantaneous. Submitting an update is much the same as when you submit an app for the first time. It has to go through the whole review and approval process all over again. So when you go back to iTunes Connect, you'll see for the app you've updated, there'll be a green light for the older version that's approved and currently on the App Store and an orange light for the update that's waiting approval. Once the update has been successful, it will automatically replace the older version (if you chose that option earlier) and then you will only have the one green light, for the most recent version, on iTunes Connect and then people who have downloaded the app previously will get the Update alert in the App Store on their phone/device letting them know that there are updates available.
For me, the update process was reasonably quick. It took anywhere between 3 and 5 days before the update became active on the App Store. Hope this helps.
Cheers,
Hally
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5566190#5566190
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5566190#5566190
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5566190#5566190. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro CC - General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I've bought leather case for iPhone 4 with a magnet clip situated on the back side just above the "apple" label. Can it interfere with any signals or made other damage?

I've bought leather case for iPhone 4 with a magnet clip situated on the back side just above the "apple" label. Can it interfere with any signals or made other damage?

I have been using a leather case with a magnetic clasp for months. The only side effect is that I need to recalibrate the compass app when I use it. This is really not a problem since I don't use the compass app very often. I haven't encountered any other interference or problems.

When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off but i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half anhour - can anyone help?

Hi,
When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half an hour - can anyone help?
Thanks

Before beginning the download, try temporarily disabling the antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required and is running with that secure OS.

For iphone users with att, can you block incoming texts all together? After paying $20 for data i dont want to pay as i go/pay more for texts

For iphone users with att, can you block incoming texts all together? After paying $20 for data i dont want to pay as i go/pay more for texts

SMS is exchanged over the same network as calls - no data involved.
MMS requires data.
iMessage requires the same as email - internet access via an available wi-fi network or via your carrier's cellular data network.
You can disable SMS/MMS altogther with your account by requesting this with AT&T. You can turn iMessage off unless your iPhone is connected to an available wi-fi network.

Armband for iPhone 4 with Apple Bumper

Any suggestions for a armband for my iPhone 4 with Apple original bumber. Looking for a case for running with the GPS. I don't want to remove the bumper everytime I use the armband.

I've been using the Tuneband for some time now
http://www.amazon.com/Tuneband-description-Grantwood-Technologys-Protector/dp/B0 019FEZ88/ref=sr14?ie=UTF8&qid=1293545210&sr=8-4
If you've already got an inexpensive case, then consider cutting two slots in the back of your case. You can then use a velcro tool strap from one of the big box home improvement stores. It's an identical solution to the Tuneband except without the logo.

IPhone 4 with bumper and official Apple Dock

I don't seem to this subject anywhere - but it's one that is really annoying me.
I use the official Apple dock regularly everyday to keep the phone in view and synched as I'm a graphic designer. I also hate putting cases on things. So this 'fix' that Apple are offering becomes a problem for people like me who use a dock (and spent £25 getting one) as the iPhone 4 with a bumper case on - will not fit in it.
I spoke to Apple yesterday and they won't admit or deny it! I also spoke to two people on Apple Chat and the first cut me off and the second just kept copy and pasting this: "I do not have information confirming the iPhone will 100% fit snuggly into the iPhone 4 dock with the bumper on."
Anyone else think this is not acceptable - as in the 'fix' doesn't help me or others who use the dock frequently.

Well, the lesson I learnt with the original iPhone, is to NEVER buy the specific dock for your iPhone - buy a universal dock, and then the adaptor plates to fit whatever you want to dock in it. That way you only have to spend £7 each time you get a new device, not £30 (or however much the proper dock is).
Plus, you can use the universal dock WITHOUT an adapter - in which case, your phone, in the case, will fit. It's not ideal, as your device won't have physical support (it'll be held up purely by the dock connector which could strain the connector and the port on the device), however my 3G in a case was used (unsupported) in such a dock every night for the past year with no apparent ill effects to either the phone or the dock. At work I also have a universal dock, but this one had some sticky foam pads added to it to give a bit of support. You might also find that the dock adaptor for an iPod classic will provide suitable support - they're a similar shape.
Having said all that, I really can't believe that only one company (that I've heard of) makes dock adapters that fit an iPhone with a case on. The whole point of the universal dock was that you could have plates that fit anything - and I'm really surprised Apple, never mind anyone else (barring the one company I can't remember) haven't capitalised on this opportunity to make even more money by selling bits of plastic.
Apple make dock adapters. Apple make bumpers. They really should be making dock adapters that fit the bumpers!
Message was edited by: Steamrunner TTT

I am having an iphone 4 and it is not working. i am trying to restore it on itunes directly but it stays at waiting for iphone status with no errors and the iphone goes into a mode where it keeps restarting continuously with apple logo on the screen

the iphone goes from recovery mode to some other mode where it keeps restarting with apple logo flashing on the screen continuously. and there is no error in itunes at all which stays in "waiting for iphone" status

Hi there yaswanthfromcumbum,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
-Griff W.

Is there a fix for iphone 5 with uconnect issues?

I have a 2014 Grand Cherokee with Uconnect and when my phone is paired to the vehicle it works fine. When I shut my vehicle off and restart it, the phone kicks out. Uconnect states there is no phone connected. I keep having to pair it over and over and over again. I currently have an iphone 5 with the ios 6.1.3 software update. Does anyone have any resolution to this issue? Thank you in advance for your assistance.

Then go for one of the old cables with a 30 pin to lightning dock connector
Add an Apple Genuine 30 pin to lightning adapter to fit the iPhone 5 plug into that the car cable
I use several in different scenarios but do buy the Apple product most of the cheap rippoffs do not work correctly
http://store.apple.com/uk/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45

How do I change the password that connects my Outlook for iPhone app with my Exchange server?

I changed my domain password so I needed to change it on my iPhone Outlook app. I have looked everywhere I can think of, in the settings and everywhere else, and cannot find anything that will allow me to change the password. I had to uninstall and re-install.
This seems ridiculous to me.
Corey Carmickle

Hi,
Since this forum is for general questions and feedback related to Outlook for Windows, I'd recommend you post your question to the Office for iPhone forum:
http://answers.microsoft.com/en-us/office/forum/office_mobile-outlook-os_device_iphone?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
I would very much like to get "the most qualified pool of respondents". However, in the link you supplied there is NO place to ask a question. There was someone who asked a similar question and the response was from a Microsoft Support Engineer pointing
him to yet another place "for better suggestions". This site is setup like some gigantic maze where when you can't answer a simple question like; Where can I change my domain password in the new Outlook App for iPhones? You pass us around until you
figure it out, or we give up, delete the app and start feeling like not everyone over at Microsoft has a brain. I apologize for the frustration level, but when I do this kind of thing for a living and it becomes this difficult, I can't imagine what most of
Microsoft's endusers feel. 'Thank you for your understanding.'
Corey Carmickle

Cisco Mobile 8.1 for iPhone - Help with features please

Hello all,
We have just upgraded to 8.0.3 and have added the iPhone cop file so we can have Mobile up and running.
So far we have managed to get 8.1 working fine on 3 iPhones successfully with the basics but have not managed the following:
1) Corporate directory access. We are not integrated with AD and have read that iPhone app cannot pull the end user directory. Is there another way apart from integrating with LDAP as we have a lot of users in the end user directory that do not have profiles in AD and I presume they will all get disabled as soon as we integrate..
2) GSM handoff - I have been going through the config to get this up and running and any tips would be very much appreciated.Do you need to add a directory number for the handoff number or is the config as simple as 2 boxes? (Call routing>Mobility configuration - Handoff number and Partition)
3) Voicemail - Is it possible to have voicemail if we are not running connection. We have version 7 of standard unity...
Your help would be greatly appreciated on any of the above...

Hi Mike,
In my opinion you have a routing problem. Please check if a VPN client knows the route to the other VPN client. Print route on a VPN laptop. Check gateway for the given IP range (default or static route).
Then on your internal routing equipment you must have route for your VPN ip range configured.
If I'm not wrong you cannot ask your VPN box to route traffic directly between 2 established tunnels. It must first go outside first tunnel and then revert back to VPN concentrator and enter second tunnel.
Signaling differs from RTP because it goes through the SIP proxy and not p2p, so that's why it rings.

Pouch for iphone 4 with bumper??

Similar Messages

Maybe you are looking for