Pourquoi mon application itunes se referme immediatement apres l'avoir ouverte

boujour
Pourquoi mon application itunes, sur mon iphone, se referme seul tout de suite apres l'avoir ouverte. Impossible de faire quoi que se soit. J'ai fait les derniere mise a jour et j'ai redemarer le iphone. merci

Bonjour,
J'ai moi aussi un iPhone 4s sous IOS7 mais depuis la mise à jour le même problème
J'ai tout essayé mais en tentant le tout pour le tout j'ai cliqué sur "réinitialiser les avertissements" et depuis mes musique se sont resynchroniser et elles ne sont plus grisées comme avant
je ne sais pas si c'est cela qui à permis à mes musique de se resynchroniser correctement
J'espere avoir pu vous aider

Similar Messages

Mon application itunes store n'ouvre plus

Bonjour, depuis quelques jours j'essaie d'ouvrir mon apllication itunes store et aussitôt qu'elle ouvre elle se ferme tout de suite. J'ai essayé de redémarrer mon cell mais ça ne fonctionne pas. En plus, cette application ne peut pas être enlevé et remis. Merci de votre aide

Cette pomme doc pourrait résoudre le problème -> iPhone : dépannage des composants matériels

Bonjour j ai achete un iphone d'occasion avec l'application TomTom europe occidentale seulement il m'est imposssible de sauvegarde l'application sur mon compte itunes que dois je faire ? Suis je obligé de repayé ?

Bonjour j ai achete un iphone d'occasion avec l'application TomTom europe occidentale seulement il m'est imposssible de sauvegarde l'application sur mon compte itunes que dois je faire ? Suis je obligé de repayé ? Je n'ose pas synchronisé mon iphone avec mon ordinateur de peur de perdre l'application.

Merci 10000 fois Vincent!
Enfin apres plusieurs tentatives, ta reponse fut satisfaisante! Ca fonctionne maintenant et j'en suis tres heureuse!
Quand j'ai créé la variable et que je l'ai "Drag and Drop" sur mon diagamme block, dans les propriétés de celle ci, j'ai suivi tes instructions et j'ai mis le path de la variable créée dans le projet (soit My Computer\test opc.lvlib\Variable1) et j'ai lié mon array de controls a la variable partagée. Je n'ai pas changé les propriétés de mon array de control. Il a toujours l'URL de l'OPC server (soit opc://localhost/APPLICOM.OPCServer.1/CS8.SYMBOLS.WTOOL_LIFE). Je sais que ca fonctionne, mais est-ce réellement la bonne maniere de faire?
Aussi, je ne comprends toujours pas pourquoi nous devons utiliser des Shared Variables? A quoi servent-elles exactement?
Merci encore pour ton aide,
Stéphanie

Mon compte Itunes est crédité sans raison

Bonjour,
J'avais sur mon compte Itunes 24,24 euro et quand j'ai téléchargé une application à 0,89 euro, il me reste plus que 0,87 euro sur le compte!!!!
Est ce que c'est déjà arrivé?
Merci de me repondre rapidement.

Dans le menu de iTunes sous "Store" il faut autoriser "this computer": donner votre identité Apple et mot de passe. faire un mise à jour pour le iphone.

My itunes does not open. I receive this error message:unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary

Process:         iTunes [6564]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.3.1 (10.3.1)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [143]
Date/Time:       2011-06-26 09:12:25.888 -0400
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: 57AD9B95-8923-403C-BDB2-EBBBD4E1F09C
Interval Since Last Report:          40546 sec
Crashes Since Last Report:           6
Per-App Crashes Since Last Report:   5
Anonymous UUID:                      0B83B69E-63F7-4197-908B-49A24783F09F
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
    0x1000 -   0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 3 incoming serial ports
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2

I have the same problem...
Process:         iTunes [498]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.3.1 (10.3.1)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [254]
Date/Time:       2011-06-27 14:23:04.822 -0400
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: AC114B5B-BBDE-47BE-A34A-73D0CBEC2D1D
Interval Since Last Report:          21605 sec
Crashes Since Last Report:           3
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      7CA002EB-2F78-46A8-B8FC-917C420125C9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
    0x1000 -   0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2250BH, 250.06 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0229, 0x5d200000 / 3

Itunes won't open and i am getting this error message: the application itunes quit unexpectedly. the problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in

Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in

Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in

Can I use an External Hard Drive To Store my Media and Link to Applications (iTunes, iPhoto)?

Good Afternoon,
I purchased a Macbook Air as a hold over until I could get a Macbook Pro. Unfortunately some things have come up and I am going to have to wait a little longer than anticipated before buying the Macbook Pro. Since I initially intended to have this laptop only for a short time I got the bare bones one with the 128 GB SSD.
Is there a way to set things up so I can move all of my media ( Music, Movies, Pictures etc,, ) onto a external portable hard drive that I can connect to the the laptop before I boot it up and have applications ( iTunes, iPhote etc. ) automatically link to the hard drive and my media?
I called Apple to see what the cost would be, if it was even possible, to have the 128 GB replaced with a 256 GB and I was told that it is possible, but it not a service they offer. So he suggested that I do this instead.
I know this is something that is fairly easy to do on a PC as I have done it before, but my concern is if Apple applications would work. I always had the understanding that iTunes ( for example ) must have its files stored to the local drive.
Any help is appreciated.
Thanks,
Eric

I have multiple iTunes libraries on the system now. I have one for my iPhone ( I left that one called iTunes ), I have one for my Nano that I use when I run ( Called iPod Nano ), and I have one called AppleTV that holds my movies. I switch between them regularly, so I understand switching between libraries.
So it basically does not matter where the library is located ( Local Drive or External ), as long as the proper library is selected when the external is connected?

You cannot open the application iTunes (11.1.4) because it is not supported on this type of Mac

After updating iTunes to 11.1.4 as suggested by automatic updates I get the message:
"You cannot open the application iTunes because it is not supported on this type of Mac"
Why did it let me do the update then?
How do I undo the uodate to iTunes?
This is on a Mac Mini running OSX 10.6.8 with 1GB mem

What processor do you have?
If it's a CoreDuo (as opposed to a Core2Duo), then you ave a 32 bit OS, and no... 11.1.4 won't run on a 32 bit OS.
=Downgrading from iTunes 11 to iTunes 10.7=
Back up your computer first, in case the wrong things happen.
Replace the iTunes 11 application with iTunes 10.7. I can't provide details on this since I do not have a newer computer. With mine it is very simple but I believe on newer computers iTunes has been integrated into the operating system. On mine I just go to my applications folder and drag iTunes to the trash. See below for possible suggestions on how to remove.
https://discussions.apple.com/message/20431349
Get iTunes 10.7. Apple does not keep many old version up on its web site. I always keep an iTunes installer on my archive drive so I can have access to old versions . This one is hidden but it is on an official Apple site:
iTunes 10.7 for OS X http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
You will have to rescue your old iTunes library from your Previous Libraries folder and rename it iTunes Library.itl because a newer version of iTunes irreversibly updates your library file. See:
https://discussions.apple.com/mesage/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Other issues:
https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading

ITunes Won't open in XP - error "Faulting application itunes.exe"

I had to reload factory settings to solve another problem, now iTunes won't launch - I get the "windows needed to close the application..."
error is "faulting application itunes.exe, version 6.0.5.20, fauling module unknown, verion 0.0.0. fault address 0x100001...

hmmmm. it's not the error message that i usually associate the following problem with, but it's worth checking on.
does your QuickTime currently launch? (itunes needs a functioning QuickTime in order to work properly.)
if it doesn't launch properly, let's try a standalone QuickTime 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Installers … get the one that doesn’t mention itunes 6
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Faulting application iTunes.exe...

helllo,
I'm running quicktime on a win2k3 (sp1) server and am getting the following error:
"Faulting application iTunes.exe, version 6.0.4.2, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84."
the itunes\quicktime will not work in any way.
tried the microsoft help, directX updated, graphics\sounds drivers updated.
please advise asap.
Shahar
[email protected]

I just ran across this exact error on my W2K3 R2 box. The only thing I've been able to determine thus far is that one of the security patches from Microsoft kills iTunes and no amount of re-installing or cursing helps...

Faulting application iTunes.exe, ver 6.0.5.20, faulting module shell32.dll

Hi there
I'm getting the following error running 6.0.5 on Windows 2003 SP1, any ideas?
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 19/07/2006
Time: 21:25:30
User: N/A
Computer: xxxxxxx
Description:
Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.

I feel like I heard about a similar issues in win 2003, and cannot remember for the life of me what caused it.
If you're out of options, look through here and see if there's something you haven't tried that may help, and I'll try to find where I saw the error I mentioned, and come back with more info
Let me know if you get anything more turned over on your side

Permissions differ on Applications/iTunes.app/Contents/Resources...

Hello,
When I use Disk Utility to verify Disk Permissions on Macintosh HD, I get about 1,500 lines displayed like
Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AACEncoderConfig.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
A few others are similar - only regarding Safari instead of iTunes.
Why is it so?
What does this mean?
Repairing Disk Permissions doesn't help.
What can I do to get rid of these messages?
Many thanks!
BTW Would this be the same under Mavericks?

Hi,
It's normal.
The reported errors are less in the latest versions of the OS but some do keeping showing up.
In Leopard the list of "regulars" is particularly long.
Debate has continued for some time as the value of Repairing Permissions and whether to do it "Live" from the Boot volume of from the Utilities in a CMD + R reboot.
For me, in Mavericks, a Safari item and a Installed printer item continue to show up.
8:37 pm Thursday; June 12, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

"Convert selection for iPod" "The application iTunes quit unexpectedly"

I've been trying to convert some QuickTime movie files and a MPEG-4 video file in iTunes for my iPod. It gets partway in, or fairly far in, then iTunes spontaneously quits and I get the message "The application iTunes quit unexpectedly."
What might I need to do to convert the videos successfully and stop iTunes from crashing?

"The update “iTunes” can’t be installed.
The Installer could not install some files in “/”. Contact the software manufacturer for assistance."

"You can't open the application iTunes because it is not supported on this type of Mac"

Yesterday, Software Updater has installed something which required me to "close iTunes in order to complete the installation" - I can only assume it was an iTunes (or related) update?
Now when I try to open iTunes, a window appears, stating: "you can't open the application iTunes because it is not supported on this type of Mac".
I have a Macbook (late 08) and am running 10.6.8
I'm conscientious about keeping my software & apps up to date, so it should only be something very recent & I assume fairly minor...
Any ideas??

To anyone else who may have experienced this problem (I doubt that I'd be the only one):
Over the past couple of days I have left my Macbook sitting idle for extended periods, put it to sleep, & also shut it down.
This morning I tried to reinstall the same download that didn't work a couple of days ago & it has been recognised, installed & seems to run just fine - playing right now I'm happy to say!
I suggest you try doing the same: ie. leave your machine sitting idle till it sleeps & shut it down, before you try the reinstall.

I am trying to open up my iTunes from my Mac. It says "You can't open the application iTunes because it is not supported on this type of Mac." What do I do?

I am trying to open up my iTunes from my iMac. It says "You can't open the application iTunes because it is not supported on this type of Mac." What do I do? I've already force closed all other apps.

Well, obviously the problem isn't with the other apps, it's with the type of Mac you have. What type of Mac do you have?

Pourquoi mon application itunes se referme immediatement apres l'avoir ouverte

Similar Messages

Maybe you are looking for