Pov invalid error while calculte the data in smart view

hi,
While opening the hfm application in workspace.And then when it will open with smart view(1.2.2.300)
select the cell and then click on calculate it is showing error
"Pov selected for this function is invalid"
Plz,suggest for solutions for this thread.
Thaks
Regards:
RP

Hi,
There used to be an issue in version 11.1.2.1 and oracle suggested to use the latest smart view version.
I would suggest to create an SR.
Regards,
Thanos

Similar Messages

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

Hello,
I would like to have sugestions and help to solve a problem in IS 4.2.
I've created a view from two tables, joined together with the key from each one.
Then i've binded the rule with the view (mentioned above) created and calculated score for it.
The calculation is successful, however when i try to export all failed data i have the following error:
"Encountered an error while exporting the data. View the lof file (DPR-10126)"
When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
However, when i visualize the data from the view created, it is also possible to export to csv file.
Resuming, the error occurs only when exporting all failed data from the view.
Can anyone help with this issue?
Thx
Best Regards,

Hello,
Your information is correct.
I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
Thank you very much for your input.
Best Regards,

Error, while pushing the data from Oracle to MSSQL.

Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.

[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view.

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error while writing the data into the file . can u please help in this.

The following error i am getting while writing the data into the file.
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>null</code>
</part>
<part name="summary">
<summary>file:/C:/oracle/OraBPELPM_1/integration/orabpel/domains/default/tmp/
.bpel_MainDispatchProcess_1.0.jar/IntermediateOutputFile.wsdl
[ Write_ptt::Write(Root-Element) ] - WSIF JCA Execute of operation
'Write' failed due to: Error in opening
file for writing. Cannot open file:
C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing. ;
nested exception is: ORABPEL-11058 Error in opening file for writing.
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation
\WORKDIRS\SampleImportProcess1\input for writing. Please ensure 1.
Specified output Dir has write permission 2.
Output filename has not exceeded the max chararters allowed by the
OS and 3. Local File System has enough space
.</summary>
</part>
<part name="detail">
<detail>null</detail>
</part>
</bindingFault>

Hi there,
Have you verified the suggestions in the error message?
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing.
Please ensure
1. Specified output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Local File System has enough space
I am also curious why you are writing to a directory with the name "..\SampleImportProcess1\input" ?

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while loading the data from text file

Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.

Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?

Getting an error while fetching the data and bind it in the Tree table

Hi All,
I am getting an error "A navigation paths parameter object has to be defined - " while fetching the data and bind it in the Tree table.
Please find the code and screenshot below
var oModel = new sap.ui.model.odata.ODataModel("../../../XXXX.xsodata/", true);
var oTable = sap.ui.getCore().byId("table");
oTable.setModel(oModel);
oTable.bindRows({
    path: "/Parent",
    parameters: {expand: "Children"}
Can anyone please give me a suggestion to rectify this?
Thanks in Advance,
Aravindh

Hi All,
Please see the below code. It works fine for me.
var oController = sap.ui.controller("member_assignment");
var oModel = new sap.ui.model.odata.ODataModel("../../../services/XXXX.xsodata/", true);
var Context = "/PARENT?$expand=ASSIGNEDCHILD&$select=NAME,ID,ASSIGNEDCHILD/NAME,ASSIGNEDCHILD/ID,ASSIGNEDCHILD/PARENT_ID";
var oTable = sap.ui.getCore().byId("tblProviders");
oModel.read(Context, null, null, true, onSuccess, onError);
function onSuccess(oEventdata){
    var outputJson = {};
    var p = 0;
    var r = {};
    try {
        if (oEventdata.results){
            r = oEventdata.results;
    } catch(e){
        //alert('oEventdata.results failed');
    $.each(r, function(i, j) {
        outputJson[p] = {};
        outputJson[p]["NAME"] = j.NAME;
        outputJson[p]["ID"] = j.ID;
        outputJson[p]["PARENT_ID"] = j.ID;
        outputJson[p]["DELETE"] = 0;
        var m = 0;
        if (j.ASSIGNEDCHILD.results.length > 0) {
            $.each(j.ASSIGNEDCHILD.results, function(a,b) {
            outputJson[p][m] = { NAME: b.NAME,
                                 ID : b.ID,
                                 PARENT_ID: b.PARENT_ID,
                                 DELETE: 1};
            m++;
        p++;
    var oPM = new sap.ui.model.json.JSONModel();
    oPM.setData(outputJson);
    oTable.setModel(oPM);
function onError(oEvent){
    console.log("Error on Provider Members");
oTable.bindRows({
    path:"/"
Regards
Aravindh

Error While Testing the Data from RWB

Hi Gurus,
While testing the data from my RWB --> Component Monitoring -->IE -->Test Message
I am getting the error as explained below:
Error while sending Message -->RWB
No header Mapping Defined -->Trace
Moreover when i was assigning Inbound Interface in the Interface Determination its shows in the popup window NOObjects Found instead of showing the Inbound interfaces.
Any help on this please
Regards
Sreeni

Hi ,
without completing your configuration how are you testing your interface??
1)you need to add your source and receiver interfaces in business service,select your business service then add your outbound interface in sender tab and add your inbound interface in receiver tab,if it is business system not required.
2) then check your interface/operation mapping done perfectly between source and target interfaces.
if you have above steps done perfectly then your interface will work.
if you still getting error search in sdn with error message you will find usefull tips..or post in sdn.
Regards,
Raj

Error while sending the data using input schedule

Dear Friends,
I am unable to send the data using input schedule due to following error is occur while sending the data.
The Error Message : Member (H1) of dimension (ENTITY) is not a base member (parent or formula)
Can anyone please help me to resolve the above error.
Thanks and regards,
MD.

Hi,
You are trying to send data to a parent/node, you can only send data in BPC to lowest-level children (base mamabers) of any dimension.
"H1" is a parent in the entity dimension so you should try sending to a child.
Tom.

Pov invalid error while calculte the data in smart view

Similar Messages

Maybe you are looking for