Power Adapter stopped working :(

I have a set of FPS2000 cambridge speakers and today the power adapter stopped working. Been looking today for a replacement but can't find one. anyone know which one will work as a replacement?
thanks

guess what i am also in this situation. i have the creative inspire 6700
its specs are 3.5 v, 5 A, 67.5 vA AC
im currently using, but its doggy 2 V DC
i have been looking on e-bay and such for ages. i really need a proper one. can anyone help? i've e-mailed customer support and they say they dont deal with this product anymore.

Similar Messages

Qosmio X500: power adapter stopped working for no reason

Hi,
Now i have my Qosmio X500 for a year and i like it, however i have small problems with it, and i would like to know if it can be problematic.
The first thing is that my power adapter stopped working for no reason,
So i bought a new one, but it always made some noise when the laptop was fully charged.
I know people with the same laptop and their adapter didn't make that sizzling noise, it looks like it was already defect from the begin.
Then i have one dead pixel in the middle of my screen, no problem for me.
Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...
Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
So all those problems i have annoy me, especially the last one (webcam and speakers problem), can this fit in the warranty of the laptop? I did extend the warranty for one year...
Thanks in advance.

> The first thing is that my power adapter stopped working for no reason,
> So i bought a new one, but it always made some noise when the laptop was fully charged.
I think this is AC adaptor fault maybe a broken cable or something like that I would recommend you to replace this get in contact with the dealer and ask for the new one.
> Then i have one dead pixel in the middle of my screen, no problem for me.
I found a info about such issues:
+Information on screen technology and pixel failure tolerance for LCD displays
+http://aps2.toshiba-tro.de/kb0/TSB9502LZ0000R02.htm
> Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
Maybe you should ask Toshiba notebook technicians for a check maybe some screws or the hinges are loose.
The speakers should be checked with connected headphones. If you will not notice the same crackling sound using headphones, then the issue might be related to speakers

Pavilion G7 wireless adapter stopped working and now will no longer boot.

I bought a Pavilion G7 about 7 months ago.
After a couple of months, the wireless adapter stopped working, it just disappeared from the Device Manager (Win7 Home).
I reset the computer to factory settings and it fixed that problem.
One month after this, the wireless adapter problem returned, I tried to use system recovery to restore it to a previous point, no luck.
I closed the laptop after this, didn't turn it off.
Opened it up and decided to watch a video I had on there, I had to pause the video halfway through (used Windows media player). Came back to continue watching and the screen was black. No lightbar activity, just blackness.
I pressed a few buttons, nothing.
Decided to do a hard reset (hold the power button for 8 seconds) then I left it and turned it on again, the blank screen returned, no signs of life, no boot, no HDD activity, nothing. The caps lock button was on, the wireless light (of course) was orange.
What on Earth has gone wrong? What can I do to fix this?
Thanks.

Hi
You have a couple of options as I see it please find the web link given below might help you fix the issue.
Solve Setup and Internet Connection Issues on a Wireless Network with Windows 7
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

SOA FTP Adapter stops working abruptly

Hi All,
I have a ftp service which provides XML file streams real-time on a remote machine. I connect to this FTP server using the SOA FTP adapter and process files by polling based on timestamp every 3 seconds.
The issues I face are
1) The ftp adapter stop working abruptly. Has anybody faced this issue, if yes how can this be resolved?
2) The XML files comes to FTP location at the rate 2 files per second. Ideally I want to procss this files real-time using FTP adapter. But the backlog build is causing issues. How do I fix it?
3) If there is any downtime in production how should the SOA FTP application be activated after restart.
Also, what are the other FTP adapter configuration required to optimize the SOA FTP application to meet my business purpose.

I am using SOA 11g Fusion Middleware. The error I am getting in the logs are as follows:
[2010-10-14T15:51:49.116+11:00] [WLS_SOA] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@152f8c60] [userId: <anonymous>] [ecid: 0000Iid4Vx39xWD_n91FiZ1ChcgY00001u,0] [APP: soa-infra] [composite_name: ProcessData] [component_name: Mediator] [component_instance_id: 89E3E8C0D74E11DF8F0C9FB8AC26F197] [dcid: 46e7c258a0e5cad6:-5a895c67:12ba90f4a18:-8000-000000000000197a] FTP Adapter FetchAvlFiles Could not publish file {20101014T022558ZGA0002.xml} as endpoint has been de-activated.
[2010-10-14T15:51:49.116+11:00] [WLS_SOA] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@152f8c60] [userId: <anonymous>] [ecid: 0000Iid4Vx39xWD_n91FiZ1ChcgY00001u,0] [APP: soa-infra] [composite_name: ProcessData] [component_name: Mediator] [component_instance_id: 89E3E8C0D74E11DF8F0C9FB8AC26F197] [dcid: 46e7c258a0e5cad6:-5a895c67:12ba90f4a18:-8000-000000000000197a] FTP Adapter FetchAvlFiles [[
BINDING.JCA-11079
The endpoint has been released.
The endpoint has been released.
The endpoint has been released, the message will not be published.
This is a non-fatal error. No fix is required.
at oracle.tip.adapter.file.inbound.Publisher.checkForDeactivation(Publisher.java:627)
at oracle.tip.adapter.file.inbound.Publisher.publishMessage(Publisher.java:327)
at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.xlate(InboundTranslatorDelegate.java:476)
at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.doXlate(InboundTranslatorDelegate.java:118)
at oracle.tip.adapter.file.inbound.ProcessorDelegate.doXlate(ProcessorDelegate.java:377)
at oracle.tip.adapter.file.inbound.ProcessorDelegate.process(ProcessorDelegate.java:175)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:349)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Edited by: user5108636 on 13/10/2010 23:28

After i updated to mavericks, my usb ethernet adapter stopped working.

I'm not sure why, but when I updated my software to mavericks, my USB ethernet adapter stopped working.

I'm using that adapter:
http://www.edimax.com/en/support_detail.php?pd_id=445&pl1_id=5&pl2_id=26
After I updated to Mavericks, I installed the driver in this page, but it didn't work. Then I googled "AX88772" which is my adapter's part no. or something like that, and I installed that one:
http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=97
I wasn't expecting that work but that did work. So, I think the solution of the problem is finding the right driver. I hope you solve your problem too.

Miro's power button stopped working

Suddenly my phone's power button stopped working. I can't lock/unlock the phone nor turn it off :/ Tried to take a screen shot, to restart the device but nothing happened. I dropped the phone only once or twice before months, it hasn't been in touch with water and such. Now I almost can't use my phone unless when I put the phone on charger Did anyone have the same problem? What should I do?

Haven't heard of this before actually. I would recommend that you send this phone to a service center for repair. Contact your local Xperia Support for more information:http://www.sonymobile.com/global-en/support/contact-us/What are your thoughts about this forum? Let us know by doing this short survey.

Power Cover stops working pretty much as soon as it starts

So, as soon as I touch the screen or use an external mouse, the power cover stops working. If I only use the keyboard or touch pad it works fine. When it stops working the Event Viewer has any of a few messages but the most often one is that a device reported
inconsistent contact information. I've tried all of the remedies suggested earlier (uninstalling, rebooting, letting windows re-install it on boot up, manually installing the driver, etc, etc.) and nothing is fixing this problem. This is even after the windows
8.1 update. I just got the power cover today and it's essentially a brick.
Any ideas? This is 100% reproducible (and I live in Redmond if anyone wants to see this). While I've installed a bunch of software, most of it is windows stuff, office and visual studio and none of those are running when this happens. The mouse I'm using
is a wedge mouse, also from Microsoft and obviously the touch screen is the touch screen but there seems to be a serious issue here.
Jeff Levinson | ALM MVP
Author, "Software Testing with Visual Studio 2010"
I was wrong - it just stopped working and I didn't use the external mouse or the touch screen.

Hi,
How about your problem now? If problem persists, Please try to run this command to repair online image:
dism /online /cleanup-image /restorehealth
Make sure you run this command as administrator.
Roger Lu
TechNet Community Support

On my iPad power button stopped working

On my iPad power button stops working . Is it any software problem ?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Lms 4.2 didn't notify me when a Power supply stops working

Hi Guys
i have router 7200 , one of its power supply stops working , but lms 4.2 doesn't notify me?pls help to solve this issue
thanks
ibrahim

Ibrahim,
Is the 7200 being managed by LMS? Please confirm:
1. The device is setup to be managed by fault (reference)
2. The device credentials are correct (using the tool in Device Center)
3. That you have logging and snmp server destination = LMS server on your router.
#3 is not necessary but optional. If #1 and #2 are correct, Fault management should pick up the failure.

My 3rd party 30-pin adapter stopped working after iTunes update

Although I've been getting warning messages ever since my iPhone was updated to iOS7, I was still able to charge my phone with the 3rd party 30-pin to lightning adapter. But suddenly yesterday the adapter stopped working. the only thing I can think of was that I plugged in my iPhone 5 to iTunes to sync my music, and my PC updated my iTunes to v11.1.3.8. Can anybody offer any help as to how I can get my cable to work again?
Thanks,

That's because the adapter was produced illegally using stolen Apple patented technology. It does not have the proper authentication/DAC chip in it. Buy a legal 30-pin to lightning adapter.

Windows 7 x64 Network Adapter Stops working on high load

My Network has been failing and it has been happening for about a month or so on Windows 7 x64. I dont think that the system configuration is the problem as it is happening on 2 seperate machines. One being a relatively beefed up "white" box, 4 gig OCZ ram, EVGA nForce 790I SLI Mobo, Q9600 Quad core processor, dual raid 1 - 150 Gig Raptors, 2 8800GTX SLI cards, Pure Power 800W PS. The second machine is an IBM Netbook S10. I use the Netbook as a media center connected to a Pioneer Elite 1050HD. One thing is I have a PS3 and have several 1TB Esata drives connected to an IOGear 3132 Esata 3.0Gb pciX card to my desktop.
My typical usages:
1. FTP from a private server
2. Streaming music via Winamp
3. Streaming video 720, 1080 from pc to PS3 via the PS3 Media Server
4. DLing demos or movies on the PS3
5. Network streaming a movie from the Esata drives to the bedroom or kids rooms
6. Streaming video from abc.com or southparkstudios.com from the Cox cable modem
7. RDC over VPN to work machines
Now I have noticed that when I am streaming HEAVILY, from any 2 of the above mentioned, my network connections will simply stop working with a yellow exclamation mark on the task bar network icon after a few moments, nothing in the event logs, no logs or ANYTHING at all. It will simply stop working no notifications or anything poof, gone. I have EVERY single patch, driver anything I can think of installed. Nothing works, the timing is completely random. FYI I have a NETGEAR ProSafe VPN Firewall FVX538 with a cable modem connection on WAN 1 and a cellular connection on WAN2, these have no impact I feel on the connections because the PC may go down or the Netbook will go down depending on which one has the most load. So this simply tells me that it it not a firewall router problem as I have tried using a cisco unmanaged 24 port 1GB switch and I get the same problems. From analyzing the systems and layout I am led to believe that it is either a network adapter driver OR a Windows 7 problem (collisions, unhandled exception?), this NEVER happened with XP or Vista. I have tried everything but a new network adapter, I have tried the secondary adapter card on the mobo, I have tried bridging the two, I have tried daisy chaining the switch and putting each machine on its own dedicated switch linked to each other with no change. When the network goes down it is only that box effected, all other machines still connect to each other fine, only the one with load shuts down and the only ones that shut down are Windows 7. These machines are all wired with commercial cat5e patch cables, they have all been swapped for new ones lately. All networking and PC equipment are on UPS so I doubt voltage variations. Windows Firewall is disabled I only use the hardware firewall, I do not use any antivirus.
I am completely out of options, can anyone recommend a new route?
In addition when I go to the command prompt and attempt to do an ipconfig /release. I get an error saying that the adapter is not in a usable state. Very irritating, this forces me to reboot, or right click disable/enable on the network adapter. The right click route takes almost a minute to complete.
Tried update driver in nvidia control panel, no luck. I have also turned off the networking power saver option in the adapter settings.

Hi,
Considering this issue occurs on 2 different machines, I also think this issue may be more hardware related. You may also try the following:
1.    If the computers are connecting to a router, please ensure the router’s firmware is up-to-date.
2.    Please run the following command in an elevated command prompt in Windows 7:
netsh interface tcp set global rss=disabled
netsh interface tcp set global autotuninglevel=disabled
netsh int ip set global taskoffload=disabled
3.    Disable SNP in Windows 7 by setting Registry as following:
Note: Please perform a full-system backup first.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
EnableTCPChimney=dword:00000000
EnableTCPA=dword:00000000
EnableRSS=dword:00000000
If the keys do not exist, please create them and assign the value.
An update to turn off default SNP features is available for Windows Server 2003-based and Small Business Server 2003-based computers
4.    If the issue persists, please add another network adapter to this computer and see how it works.
Hope this helps. Thanks.
Nicholas Li - MSFT
Hi, I'm experiencing a simular problem here.
My PC was using Asus P5Q-E motherboard but exchanged it for Asus P5Q TURBO Pro because it loses 'connectivity ' after an interval between a few hrs to 26hrs. During this state, I can't browse or my Outlook to check emails. The only thing that can send/receive data is Vuze. Plus, the strange thing is that the network icon says there's nothing wrong at all (when it obviously there is). Even the currency desktop gadgets says the time elapsed since it 'lost connectivity '.
I initially thought P5Q-E was faulty so now I'm using the TURBO Pro. However, the problem still persisted.
I am using Win 7 Ultimate x64 with all the updates and drivers. Connected via LAN cable to the router and the firmware is the latest. My ISP sent me a replacement router to confirm that their equipment is not faulty, which is true.
I have tried the above methods 1-3.
Although I'm not sure if I implemented Method 3 correctly since I don't usually go to the registry but here's what it looks like after creating it:
EnableRSS   REG_DWORD   0x00000001 (1)
EnableTCPA REG_DWORD   0x00000001 (1)
EnableTCPChimey REG_DWORD   0x00000001 (1)
There are 3 more PC's and 1 laptop in the house. 2 PCs use Win XP, 1 uses Win 7 Ultimate x64 and laptop uses Linux Ubuntu.
My PC has a second OS, Linux Ubuntu, I used it to time trial both motherboards (before and after switching) and found no problems at all even after 48hrs, so it confirms it's not a hardware issue.
The other PC's apart from mine are connected wirelessly. As far as I've been told, they don't experience the same issue I have.
I've been trying to tackle this problem for months now and I'm frustrated to reboot my PC every time it 'loses connection '.
I chatted with Asus about the issue when I still had the P5Q-E mobo, they said that they built a simular system to mine with the same mobo and said they couldn't reproduce the problem I'm having. THey even tested on other mobos with the same LAN chip and found nothing wrong. That's why I got the TURBO Pro that has a different LAN chip.
Anyone got anymore suggestions???
Thanks in advance.

Re-post:HP Pavilion dv6-6120ee laoptop ac adapter stopped working

I have HP Pavilion dv6-6120ee laptop ..
ac adapter suddenly stopped working and make electricity of the flat cutting off and when I tried it again it's not working
after few days I noticed that "HP Laptop Power Cord Safety Recall and Replacement" I make an order and yes the problem
was found because of the ls-15 cable that provided .. so as it is appeared its manufacturing mistake and I got hurt cuz of
this mistake .. I don't know what is damaged now the ac adapter or the ls-15 cable but anyway if the ac adapter is
damaged what will i do with the replacement cable I think it will be useless ... so as we see it was manufacturing mistake
and not the user mistake please provide me a fair answer !

Hi @8qth3n
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

USB Ethernet Adapter Stopped Working On Mac Mini Server Running 10.6.6

Is anybody out there successfully using the Apple USB Ethernet adapter on a Mac Mini Server running 10.6.6? They have stopped working for me.
The boot disk in the 2009 Mac Mini Server in my classroom failed and after Apple replaced the disk and I reinstalled SLS and ran Software Update to bring the machine up to 10.6.6 the USB Ethernet adapter that was the interface to the outside world no longer recognized when a cable was plugged in. The cable was good and worked just fine if plugged into another machine or the built-in interface. At first I thought that the USB Interface had failed but after trying two new ones (graciously exchanged by Apple) and finding that none of them worked I'm coming to the conclusion that perhaps the warning on the package that the USB Ethernet only works with the MacBook Air finally became true.

Douglas Urner wrote:
Is anybody out there successfully using the Apple USB Ethernet adapter on a Mac Mini Server running 10.6.6? They have stopped working for me.
The boot disk in the 2009 Mac Mini Server in my classroom failed and after Apple replaced the disk and I reinstalled SLS and ran Software Update to bring the machine up to 10.6.6 the USB Ethernet adapter that was the interface to the outside world no longer recognized when a cable was plugged in. The cable was good and worked just fine if plugged into another machine or the built-in interface. At first I thought that the USB Interface had failed but after trying two new ones (graciously exchanged by Apple) and finding that none of them worked I'm coming to the conclusion that perhaps the warning on the package that the USB Ethernet only works with the MacBook Air finally became true.
Only the specific build of Mac OS X that comes with a MacBook Air includes the kernel extension to run the Apple USB Ethernet adapter, however there are no hardware issues preventing it being used on other Mac models if you have a suitable driver.
Generic USB drivers can be downloaded for free from http://www.sustworks.com/site/newsusbethernet.html and this worked for me.

Power Adapter Not Working...

Please Help!
When i plug my power adapter in nothing happens. The tip does not light up orange or green, the computer acts like its not even there, it does not charge anything. I have tried different outlets and power strips and still nothing. I have tried using the long cord instead of the short nub I have also tried resetting the PMU which did not help. I also tried leaving it unplugged for 60 secs and still nothing...
Is anything else i can do to get it working? I really dont want to spend the 80 bucks on another one...
Thanks
iBook G4 1.42 1.5GB DDR SDRAM 60Gig HD Mac OS X (10.4.6) Mac mini 1.66GHz ICD 2Gig Ram 80Gig HDD

Since it's clearly not the outlet there are still two remaining points of failure, the ibook and the adapter. If you can, try a friend's adapter on your ibook and try your adapter on their ibook.
If your adapter doesn't charge any other ibooks/PBs out there it is likely dead and will need to be replaced. You can either get a new one from apple or find a third party one like this one.
http://www.amazon.com/gp/product/B0001YXWVO/ref=pdcp_etitle/104-5595520-9388738?%5Fencoding=UTF8&v=glance&n=172282

USB Bluetooth adapter stops working after 10.8.5 upgrade

For several months I've been using an IOGear USB Bluetooth adapter and a USB KVM to share my Magic Trackpad between a Mac Mini and a MBP, both machines happily running 10.8.4.
Tonight I upgraded my MBP to 10.8.5 and now Bluetooth is apparently disabled when I have the USB adapter plugged in:
Now I'm left with the unappealing decision of using my Trackpad with only my Mac Mini, my MBP, or constantly repairing it with either to share.
I've been shockingly happy with this little trick, but I guess it was too good to last. Anyone have any ideas why using a USB Bluetooth adapter would stop working? Maybe I need a different adapter now?

Thanks! That solved my problem. I just had to swap in my device id which was different than yours.
I converted my USB adapter's idProduct value from hexidecimal (0x2101) into decimal (8449) and added this configuration:
                    <key>BroadcomUSBBluetoothHCIController_Dongle - IOGear2</key>
                    <dict>
                              <key>CFBundleIdentifier</key>
                              <string>com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport</string>
                              <key>IOClass</key>
                              <string>BroadcomBluetoothHostControllerUSBTransport</string>
                              <key>IOProviderClass</key>
                              <string>IOUSBDevice</string>
                              <key>idProduct</key>
                              <integer>8449</integer>
                              <key>idVendor</key>
                              <integer>2652</integer>
                    </dict>

Power Adapter stopped working :(

Similar Messages

Maybe you are looking for