Power adaptor light flashing orange to green

starting this morning my power adaptor seems to have an issue. the light keeps flashing back and forth bewteen orange and green. and therefore the computer wont really charge. it will operate plugged in this way though.
last week part of my cord did get damaged. the little bumpy part right next to the plug that goes into the computer. the first little bump of the three somehow came off. there does not seem to be a hole or tear in the cord under where it was though.
what purpose does that section serve? is that what is causing my problem?
any ideas?
my computer is one year and one month old, grrrr no longer under waranty...
~ michelle

Hi Michelle,
Given the sloppy design of the iBook, including its power adapter, I would suggest you bite the bullet and buy a new adapter. Otherwise your iBook's DC board may be damaged.
Resetting the PMU helps, as does unplugging both ends of the pwr adapter, waiting for at least 1 minute and plugging it back in. BUT, since you're sure the cable is broken, GET A NEW ONE!
I had a similar problem with my power adapter for my 3-month old iBook, except that the light would suddenly not turn green at all. The cord and the rest of the adapter were intact. I was lucky I still had 7 months of warranty left and got a new adapter from Apple. So far everything is ok.
Good luck, Michelle!
-Andi, a discontented iBook owner.

Similar Messages

HT3275 the light on my time capsule keeps flashing orange and green. I know it is supposed to be green how can I get the green light to stay on

the light on my time capsule keeps flashing orange and green. I know it is supposed to be green how can I get the green light to stay on

Orange and green flashing is unfortunately a failure indication.
How old is the Time Capsule?

My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

Wrong forum. This is the iPad forum.

Macbook Pro not working - charger flashing orange and green...

So I have 13" macbook pro 2010... i was on it yesterday when all of a sudden the screen started flashing black and back to normal and black again really quickly... so i shut down the laptop and put it aside for a few hours... i returned later and tried to turn it on and nothing... then i noticed the charger light was flashing orange and green... all the battery lights on the side are dead and when i try to turn it on no noise coming from the laptop.... i have tried resetting the smc but nothing... please help?

Repair facility.
Ciao.

Cisco 1130 status light flashing orange

hello,
I have a question, I have an ap (cisco 1130) that began to get the status light flashing orange and light Ethernet and radio are off.
I did a factory reset and it was ok ... past 3 days the problem has happened again ...
I changed the ap with a new but the situation remained ...
I tested the wiring and everything is ok.
the switch port is set up correctly
may be what??
problem switch??or problem ap??

hello,
I connect the console in to the WAP and then reboot the result of the bootup is as follows:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6858240
flashfs[0]: Bytes available: 9140736
flashfs[0]: flashfs fsck took 31 seconds.
Base ethernet MAC Address: 00:24:97:6e:2c:e2
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
link auto-negotiating....
auto-negotiation takes 10000 milli-seconds to complete
ERROR: timeout waiting for auto-negotiation to complete
ERROR: fail to bring ethernet link up
The system has been encountered an error initializing
ethernet port. You may need to check hardware
The system is ignoring the error and continuing boot.
If you interrupt the system boot process, the following
commands will reinitialize ethernet, tftp, and finish
loading the operating system software:
    ether_init
    tftp_init
    boot
Loading "flash:/c1130-k9w8-mx.124-23c.JZ/c1130-k9w8-mx.124-23c.JZ"...########################################################################################################################################################################################################################################################################################################################################################################################################################################################
File "flash:/c1130-k9w8-mx.124-23c.JZ/c1130-k9w8-mx.124-23c.JZ" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JZ, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 06-Apr-11 15:01 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15740928
flashfs[1]: Bytes used: 6858240
flashfs[1]: Bytes available: 8882688
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Radio0 present A506 7100 E8000000 A0000000 80000000 3
Radio1 present A506 6700 E8000100 A0040000 80010000 2
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision B0) with 25590K/7168K bytes of memory.
Processor board ID FCZ1317Q102
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 7.0.98.218
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:24:97:6E:2C:E2
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC13142PXW
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1317Q102
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:05.864: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:07.480: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:09.066: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.154: %LWAPP-3-CLIENTEVENTLOG: Unable to open event log file flash:/event.log
*Mar 1 00:00:09.155: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 0 messages)
*Mar 1 00:00:09.184: status of voice_diag_test from WLC is false
*Mar 1 00:00:11.294: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:11.358: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JZ, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 06-Apr-11 15:01 by prod_rel_team
*Mar 1 00:00:11.358: %SNMP-5-COLDSTART: SNMP agent on host CC-P2-AP4 is undergoing a cold start
*Mar 1 00:00:11.437: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:11.615: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:11.615: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:11.615: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:11.877: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:11.877: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:12.297: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Mar 1 00:00:12.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:12.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:30.265: status of voice_diag_test from WLC is false
*Mar 1 00:00:30.308: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:40.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:00:41.348: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
*Mar 1 00:00:50.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:00.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:10.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:14.626: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source
*Mar 1 00:01:14.665: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:01:14.703: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:15.627: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:15.665: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:01:20.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:30.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:30.348: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar 1 00:01:40.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:50.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:00.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:10.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:20.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:20.356: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar 1 00:02:30.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:40.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:50.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:00.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:10.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:10.359: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar 1 00:03:20.362: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:30.362: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
I was checking another thing, usually the switches we use here in my work supports a maximum of 14W per port or 15.4w, this wap is consuming 15.2w
Is this the problem??
the strange to me is that,in this same sw I have several WAP and they all use 12.2w
The device type in sw for WAP usually appears as LAP1131AG-AIR-E-K9 ... but this WAP appears as Ieee PD ...
What problems do you think is it?

My ipod shuffle 1st generation won't restore. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?

So it's the little thin ipod with no screen...that has the usb thing and the landyard. Whenever I try restoring it it tries to restore and then a message pops up. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?. I have literally tried restoring it like 10 times and nothing happens. When i connect headphones it does not hear and that little light think happens....which i had never seen happen before. I need to fix it. ....please help....if i take it to an apple store....will it cost alot to fix that?

reset utility should help...for mac
http://www.apple.com/support/downloads/ipodresetutility103formac.html
for windows
http://www.apple.com/support/downloads/ipodresetutility104forwindows.html

Won't start up, charger flashing orange and green?

I got this MacBook 5 days ago and have been using it fine ever since, however before bed last night I shut it down and when I woke up this morning I tried to turn it back on and it wouldn't turn on, so I plugged in my charger and the charger started flashing orange and green, I also used my friends charger and it did the same thing yet they both worker on her Mac, any suggestions on what I should do?

Please make a Genius Appointment and take it in for service.

A PIXMA MP170. Power & Alarm lights flash. Ink doesn't move when cover opened. Error on print (XP).

I have a PIXMA MP170. The Power & Alarm lights flash. Ink cartridges don't move when cover opened. Service Error 6500 on print from computer (XP).

Hello danlee58.
If possible, please document the error pattern that appears on the LED display of the printer. A letter and one or two numbers should be alternating.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Magsafe light flashes orange/green

I've just bought a used MBP 2.2 MHZ which operates fine except for switching back and forth between charging modes when the battery is around 85% full. The magsafe light stays orange a few seconds, then shows green for a second, then back to orange; the charging indicator on the screen switches at the same time. I swapped to a known working magsafe charger - same result. Operating on battery power is also a bit strange, with the available percentage of battery jerking around. Looking around, I see some 2007 and 2008 threads about this issue, but no final resolution at that time. Is there now a "bottom line" to this problem? Thanks!

No, it's not a battery calibration issue - but it could be a bad battery. The flashing MagSafe is a hardware issue. Since the SMC is the controller for power systems, resetting it is about all you can do for 'software' type of fix. If that doesn't correct it, the problem is either with the adapter itself (which you apparently ruled out), with the battery, or with an internal component (more likely the left I/O board, but possibly also the logic board itself).
The fact that your available percentage jumps around points to a deeper problem (time remaining can jump around depending on system load, but % charge should go in only one direction when running on battery).
Given your symptoms, I'd be inclined to try a replacement battery first, before looking inside the case for a problem.
If there's an Apple Store near you, make a Genius Bar appointment and let them have a look - they will be able to test the battery as well.
If you like, post your Full Charge Capacity and Cycle Count (from Apple menu > About this Mac . More Info > Power) for a preliminary diagnosis...

Home hub 3 broadband light flashing orange & purpl...

Hi,
Broadband has stopped working with a flashing orange & purple broadband light (7 days and counting)
Have phoned bt but they failed to resolve the issue over phone - resetting, power off/on etc. Tried 4 different branded adsl filters, alternative router but still no connection. Only 1 main socket, no extensions connected, doesn't have a test facility(older style socket). Tried 17070 quiet line test - sounds clear. Phone line test reports zero faults.
Details from home hub 3 Broadband > connection tab
Line state: Connected
Data Transmitted/Received (GB): 0.0 / 0.0
Downstream: 7.938 Mbps
Upstream: 448 Kbps
ADSL Settings VPI/VCI: 0/38
Type: PPPoA Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 16.7 dB / 26.0 dB
Line attenuation (Down/Up): 10.8 dB / 5.0 dB
Output power (Down/Up): 17.9 dBm / 12.4 dBm
FEC Events (Down/Up): 10905 / 0
CRC Events (Down/Up): 11 / 0
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 31 / 0
Error Seconds (Local/Remote): 121 / 3
Broadband > Internet tab
Connection time: Connecting
I suspect the issue is at the exchange, has bt disconnected me and plugged someone else in? Any thoughts welcome.

you appear to have tried everything suggested by BT for purple/orange flashing constantly and not solved the problem. the help pages then say if that has failed then contact technical support but I would contact the forum mods instead for help
contact mods
can take up to 3 working days for mods to contact you
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Power-plug light ring LED - always green?

Ok, here is a really dumb question, but something I noticed.
I have an iBook G3 Dual usb. Full specs at bottom.
When ever I plug it into power, the ring lights up green. My friend has a power book. when he plugs his in, his lights up orange when it is charging and green when it is done and using AC power. Mine is always lit of green regardless if the battery is charging, the battery is full, or even if there is no battery installed.
Shouldn't my plug light up orange when it is changing as well? It seems all the power books, newer iBooks, and all modern apple laptops like the MacBook and MacBook pro all do this - so why is mine left behind?
I bought this second handed, so I asked the original owner if it was the ORIGINAL battery and ORIGINAL charger that came with the iBook when she bought it. She said everything is all original. I then told her about this and she said it has always lit of green that she could remember of and never knew about the orange/changing state.
So whats going on? is there a way to enable this "feature" or has this power adapter or battery been defective since day one?
Other the that it works fine. It charges fine, and battery lasts around an hour. This isn't something I'm going to run out and buy new just because it dosn't light up the color I want, I am just simply asking if this is normal for these older iBooks.
Thanks for any info anyone can provide!
-Scott

nope, that didn't do it. I have reset the PMU many times when troubleshooting all my other problems, but I just tried it again, but still no help.
I'm not going to worry about it, as it seems to operate just fine (remember the original owner used it this way for 7 years and it worked fine then)
I just wasn't sure if the G3 iBooks did this or not. But I guess they do, and mine just has a "bug," oh well.
I'll leave the question open in case anyone else wanted to share there experiences regarding this.
Thanks
-Scott

No power and light flashes about every ten sec

I have a HP e92910f. The power just started to not work. on the back the green light is on. the power light flashes about every ten sec. Every time the light flashes the fan does a little movement
This question was solved.
View Solution.

mrvulcan wrote:
Glad I got it going, I did some checking on power supplies and there is/are a lot of reccomendations. I have a 9290 Desktop. Any suggestions, thanks again
You are very welcome, again.
I have a preference for Corsair Products. I suggest a PSU of at least 500W; 600 is even better. Modular is a good way to go in smaller mid-size cases. You only have to use the cables that are needed to connect a component. This allows for more space for good airflow.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Broadband light flashing orange. A "copper line fa...

Hi all
on Friday 20/01/12 i was using the internet as normal, no weather problems or anything abnormal happening and then as i woke on Saturday 21/01/12 i noticed my broadband (hub 3) had a blue power light, a blue wireless light but a flashing orange light, i followed the steps on the website and restarted my homehub but the still had the same problem. i then changed the adsl filters still had the same problem even tried changing the adsl lead from the socket to the hub but still had the same problem i tried in 3 extension sockets and then also the main bt openzone socket but the problem was still the same.
i then called the bt help line where they made me re iterate the same proccesses twice of what i had already done to then finally test my line and tell me there was a "copper line fault" and the problem would be reapired by 26/01/12. i recieved the email letting me know i would be able to track the fault however when i tried the "track a fault" link it gave me the error message of that the "Sorry we cant complete your request at the moment due to technical error. Please try again" and since the 21/01/12 i have still not recieved a fault update and after many attempts at "trying again" still unable to track the progress.
The internet is crucial to my work and i need it to be running as soon as possible. i live in an apartment and have asked my neighbours if their phone line isnt working but theirs is still working and mine is the only one that isnt, i can't seem to understand how this has happened and why mine is the only one not working, and now with the phone line and broadband not working, my work will be suffering and the implications of not having the internet will be a big impact.
Is anyone else having a problem with tracking their fault or had this fault before and could offer some guidance?
really need this fault to raised as urgent and not being repaired until 26/01/12 could cripple my work.
Also for the days you are without bt vision, broadband and calls is there a way to gain compensation?
Any help or advice would be brilliant.
Thanks Bradley Kent

Keith_Beddoe wrote:
If you live in an area with good 3G mobile coverage, you could buy a pay as you go broadband dongle.
If the Internet is vital to your work, you should have a backup plan, as some major faults can take weeks to fix.
Good advice for a lot of people.
For me the Internet/email is a hobby/pastime. If it went down for a few days it would be an annoyance/inconvenience to me but thats all, but even i have a Three 3G MiFi wireless modem standing by. Just connect up, top up and go.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Flashing orange to green?

Why is my power adapter cord flash from orange to green intermidtently? ... (about every 5 seconds)
The percentage of the battery is now at 97%, and it seems like it was taking a longer amount of time to charge up.
I also switched power outlet plugs, to see if it was just the plug i was using.
any suggestions? I've already read the power/battery disscussion page for this topic, but I am still not sure what to do.
thanks!

This same thing has been happening to me. It started after the 10.5.1 update. I get the intermittent green-amber flashing on the charger. I can never get over about 95% charge before this occurs. Not only does this thing not charge all the way, I can't get it to discharge. The laptop shuts off (no warning or anything) around 30% charge. I hope this gets fixed in a hurry. My Macbook Pro isn't very mobile at the moment.

T61 Battery light flashes red and green

Hello:
My T61(type 8891) won't start. I'm getting a series of flashes from the battery and power lights:
A/C power connected: power light flashes green alternately and battery light flashes green then red/green.
AC off, battery installed: power light flashes green at the same time as the battery light flashes red/green.
This happened twice before in the past 2 weeks. After about an hour, it booted up - no problem. This time, nothing.
Thanks in advance for any assistance.

It started about one month ago - no known cause. The problem happened 3 times since then but each time it booted up by itself after a half hour or so. A new motherboard is going to set me back plenty but f it's needed, I guess I must get it repaired. I'm quite handy at taking the laptop apart. I've replaced the hinge, and bezel.
Maybe the fan is inoperable which may cause it to not boot up. Lately, I've been feeling exhaust air much warmer than before even if it's not being used. I blew the dust off it 3 weeks ago.

Power adaptor light flashing orange to green

Similar Messages

Maybe you are looking for