Power BI for Mexico

When is it going to be available the Power BI Preview for Mexico?

Hi,
We announced global availability of the Power BI Preview earlier this week, in 140 markets, including Mexico. Please check the official announcement for more details:
http://blogs.msdn.com/b/powerbi/archive/2015/03/16/power-bi-preview-now-available-worldwide.aspx
Enjoy!
M.

Similar Messages

  • Could I have got a new power adapter for free?

    My power adapter for my mac stopped working recently and as far as I know I didn't cause any damage to it myself.
    I read the following on the apple website:
    Additional Information
    Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.
    Which seems to suggest that even out of warrenty, if the charger has broken of it's own accord you can still get a free replacement?
    I took my adapter and mac to the shop, they said there were no signs of accidental damage but said I still have to pay for it. I referred to this statement from the website but they were very dismissive and kept saying it was out of warrenty. Perhaps i'm reading the statement wrongly.
    Just wondered if anyone could clarify :-)

    As you indicated, it depends on the results of the evaluation.
    Apple takes responsibility when design faults cause certain failures, especially when it represents a safety concern. There have been a small number of cases where failure met certain characteristics that Apple deemed that it should not have happened, regardless of age or use.
    I am reluctant to indicated the specificity of some of these issues, because for many reasons Apple would not want us speculating on the subject. Suffice it to say your product failure may not have met any particular characteristics associated with failures deemed to have extended coverage.
    If your product failed for an unknown reason, or apparently a failure stemming from age or normal life expectancy use, and it was after the normal expiry of warranty, then no further consideration was given. You need to buy and pay for a new one, unless you yourself, can provide extenuating circumstances to consider.

  • I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    Are you in the US? Order one from here:  http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
    Or check out Best Buy.

  • HT201897 Does a Mac Mini purchased in the USA require a power converter for operation in Europe or should I only purchase a different power cord for it?

    Does a Mac Mini purchased in the USA require a power converter to operate outside of the USA or can I simply purchase a different power cord for it?

    Depending on which European country (should their mains access plug/port shape vary) the
    cord set with correct ends on it has to match. You can buy a cord that plugs into the Mini
    where the factory cord goes, and the other end has one for the wall source shape. The wire
    for the application should be able to support 110~240VAC.
    With the cord or an accurate image in hand, you could either get a new cable to match both
    realities (mini + wall supply mains local) or an adapter (US/Standard to EU/Local) for just
    the head or input part of the original Apple cable. One plugs into the other, then into wall.
    If you have a new Mini with a small modular plug/port on the computer end of the power wire,
    it would have only two holes and no ground; the other end would have two prongs of equal
    shape and size. Not a polarized plug and not a grounded three-prong. To get a replacement
    power wire for the MINI to go from power source to the Mini is recommended, if you are going
    to be staying in one location for awhile. A Travel Kit that offers no electrical conversion but only
    the physical shape adapter kit, should a available in travel stores, airports; big box discount
    stores, computer and electronic stores. This page shows the cord end of the appliance shapes.
    The other end would be the mains shape for whichever country you are going to....
    http://www.signalandpower.com/European-Power-Cords/
    So to match the country or regional power mains type is a primary concern for obtaining the
    correct replacement cord to supply the Mini with local mains power. The end which plugs into
    the Mini is of a certain type (numbers for EU and elsewhere are published, see link + images)
    & the end that gets plugged into the mains or utility side, needs to match the local specification.
    The link to Apple, to contact for Support and Service information in prior post, should be able
    to help find a source for the local replacement type cord they'd sell local people with a Mini.
    Apple local sources offer replacements for this purpose; and for travelers, a second cord for
    a direct use (not adapter plugs) is a better bet. For those who only need a cord in two places.
    If you are traveling to Denmark, UK, Swiss or other EU countries require different adapters.
    Even places where the power itself may be somewhat similar. However your MINI has an
    automatic power supply that will conform to that energy standard, you only need to supply a
    correct non-transforming adapter. Simply a connection to adapt one shape to another.
    The general purpose travel kit that is not specialized to Apple power adapters, would have a
    plastic plug/adapter with the local pins on one side, and the US/standard two slots on the other.
    So, no circuitry nor any other change of electrical power inside this device would be required.
    http://www.signalandpower.com/2-Prong-Plug-Adapters/
    http://www.signalandpower.com/Convert-to-Europe-CEE-716-plug/
    http://www.signalandpower.com/Swiss-AC-Power-Cords/
    In other words, I believe my other post already covered this. On the ground on either end of the
    path, adapters are common and the Mini does not use proprietary electrical components IF you
    have one of the more recent shape aluminum models with the power supply built in. The older
    Mini has the power brick and two wires. A US/Standard plug adapter to EU/Local would work in
    either case, since all you'd do is plug the adapter plug into the local mains and the US plug into
    that one... I see these kinds of discards for as little as 25¢ in thrift stores in Alaska. Or you can
    buy a new one. Or you could get a complete cord with correct ends on it, for Mini + local mains.
    Hopefully this helps somewhat. The only info missing is which EU country or region is involved.
    Their shapes of plug are different, so the adapter end for local supply has to match their standard.
    Swiss, Denmark, UK, and others offer different shapes and so on.
    The Apple store in the location you are traveling should be able to supply you with a replacement
    cable for a modern MINI, that has the correct local mains end, and the correct Apple mini end on
    the opposite. Since the unit is automatically switching, the magic is done.
    Since I supplied a means to locate any number of Apple stores, authorized service providers &
    other Apple related vendors in my earlier reply: https://locate.apple.com/country you could contact
    any of them along your route in the City in whichever EU country, to find a local MINI power cable.
    In any event, I'm done...
    Good luck and happy trails...

  • Where can I get an additional power source for my MacBook Pro?

    I am travelling to Europe next week and will be travelling on the road quite often. I would like to get some work done during that time. My laptop battery will inevitably run out of power during that time and I would like to carry an additional power source with me so I can get some extra juice when I am nowhere near an outlet.
    I have the latest MacBook Pro where the battery is not removable.
    Where can I get an additional power source for my MacBook Pro? I don't mind if it is a 3rd party product.

    you could get something like this: http://www.amazon.com/Energizer-XP18000-Universal-External-Netbooks/dp/B002K8M9H C
    it's about the same cost as an extra battery used to be. there's a range of similiar products at Amazon, i'd check reviews.

  • Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
    So, I tried the iDVD and got the same error message.
    Can anyone out there help me? I've tried both a DVD - R, and a CD.
    I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
    Peace, Pyxidis

    I have had that same problem, but it was unrelated to any upgrade.
    In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
    It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
    Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

  • I am trying to find a power supply for the sony DRX-720 DVD/CD AND THE PRICE

    I am trying to find a power adapter for the sony DRX-720UL DVD/CD Rewritable Drive and the cost?

    All product support for CD/DVD drive, tape backup, or magneto-optical drive peripherals, including repair status, is available from Storage by Sony.
    NOTE: Contact and other information can be found on the Storage by Sony Web site at http://www.storagebysony.com/
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • My MacBook Pro 13in Mid-2010 won't start unless I hold the power button for about 10 seconds! Help Please!

    Hello.
    I have a MacBook Pro 13-inch (mid-2010):
    Processor: 2.66GHz Intel Core 2 Duo
    Memory: 4GB 1067 Mhz DDR3
    Running Mac OS X 10.7.2
    Yesterday I opened my computer (was sleeping as usual) and the screen just flasehed white and the computer powered off. The magnetic electricity thingy was connected and was green, so it was fully charged, and connected to the electricity.
    Since it powered off, I tried turning it on again, and again, one second after starting to boot up, screen flashed white and the computer powered off.
    I read somewhere I should hold down the power button longer, so I did, and it booted up. That's why I am able to write this. But every time I turn it off or put it to sleep, it does the same thing when I boot up.
    If I don't hold the power button for 10 seconds or so, the computer won't work.
    Then today, I did a backup of my entie hard drive, just in case. Later, I started using Excel, and about 1 hour after I was on it, suddenly it got really slow. Like I would click on a program like Safari, and it would take over 30-45 secs to start and be ready. And my computer is usually really fast!
    I went on the Internet again, started in safe mode, boot up with option+command+P+R to reset PRAM, and nothing worked. Then suddenly on one turn-off/turn-on (since I can't restart because the computer only starts if I hold the power button for 10 seconds), again it is working at normal speed.
    What can this be? Any ideas?
    I really appreciate your time and help in advance
    Gaby

    GabyBA wrote:
    I forgot to say I had already tried that as well. Just in case, I just tried it again and there was no change :S
    Are you running the Apple-supplied RAM? Have you run Apple Hardware Test? I don't know what else you've tried, but this may be time to do a fresh install of Lion if you have not done so since installing Lion.

  • Power View for Sharepoint 2013 'Feature not available'

    Hello All,
    We are trying to set up Power view in Sharepoint but every time I click the power button on a report we get the  "The
    feature: "Power View" is not supported in this edition of Reporting Services." error.
    Our setup consists of two servers.  One is the sharepoint 2013 Enterprise server and the other is our DW server that sits outside of the farm.
    The DW Server has Sql 2012 SP1 (Enterprise) and two instances of AS, one in multi-dimensional mode and one with power pivot for SP.  
    We were able to get power pivot working with Sharepoint without issue but we can't seem to get Power View to work.  I've read through some threads but it still doesn't seem clear what I need to do.  Someone mentioned that we needed to install Sharepoint
    on the DW server but we would like to avoid that if we can due to the current load on the server.  Another suggestion was to install the RsSharepoint on the sharepoint server and that would enable power view.
    I know there is already an RS Service app, would that needed removed as well?

    Only SQL BI and SQL Enterprise have the appropriate edition of Reporting Services to enable PowerView:
    http://technet.microsoft.com/en-us/library/cc645993(v=sql.110).aspx#Reporting
    You would need to uninstall SSRS using SQL Standard and re-install with BI or Enterprise on the SharePoint server.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Does anybody knows where can i buy a replacement AC power cable for my cinema display 27"?

    Does anybody knows where can i buy a replacement AC power cable for my cinema display 27"?

    It may not be the same molded plug but I would think any normal 3-prong computer power cable should work.
    How about this one?
    922-6529 Power Cord - Apple Cinema Display
    I've always had the theory that if you put two computer power cords in a drawer they will breed and you'll end up with a lot more!   My parts drawer is always full of them.  They like to knot up by themselves as well!  Maybe that's how they breed.

  • My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    You need to connect to iTunes and restore.
    iOS: Not responding or does not turn on
    You may need to put the device into recovery mode, this is covered in the link on this page.
    Did you back up the device?

  • How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

    First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

  • This device cannot start. (Code 10) Status Device Power Failure for Intel (R) Audio Display

    Hi I just bought HP Envy M7 Sleekbook last week and upgraded from 8.0 to 8.1 for Windows 8.
    Now I have no sound and this is the error message I get:
    This device cannot start. (Code 10) Status Device Power Failure  (for  Intel (R) Audio Display)
    under Sound, Vieo and Game Controllers in the Device Manager.
    Anyone else having this issue after upgrading? 
    Getting a new lappy is stressful enough but to alreay have issues is ridiculous
    If the upgrade is not the issue could something have happened in transit? (I have an issue with the way Best Buy packed it for shipment and wonder if it could have been compromised)
    Any help is appreciated. Or should Ibe taing this back to best buy and have them address it?
    Thanks
    Pam

    Ahmed, if your HP Envy has an Intel processor chances are it will be necessary to download new drivers for both sound and chipset due to compatibility issues with Windows 8.1. After 4-1/2 hours on the phone with various technical agents and a lot of frustration I finally got one who had the knowledge and training to resolve my issue. I believe he downloaded the new drivers from the HP support site. Good luck!!

  • My iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
    There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
    Regards.

  • Do I need a power converter for my ipad in Ireland?

    Do I need a power converter for my ipad2 and my macbook air (11 inch 2010) in Ireland?
    Sorry, I'm new to this site and just found the answer to my question in another post.

    I was on my way out earlier and didn't have time to see if easily bought in USA, but I also would have suggested a power strip for the UK. Also, not aware of Picachu's needs - if traveling with others, etc., ...
    For many years, once our sons got ipods, I have always brought a power strip (w/usb) on vacations and even on long weekends to weddings for all the items I listed above plus rechargeable tooth brushes, beard trimmers, and two ipads. It has made recharging so much easier. (I have friends in similar situations who hadn't thought to bring a power strip for charging things for their family all at once overnight.)
    So thanks for bringing it up. Meanwhile, Picachu got an answer early and without having checked 'get e-mail notif.' he/she might not have a clue. Still happy you brought it up.
    Thanks.

Maybe you are looking for

  • Using SSF_OPEN and SSF_CLOSE, is it possible to print the next smartform in the same page?

    Hi Experts, I'm using SSF_OPEN and SSF_CLOSE, to print multiple smartforms. In between SSF_OPEN and SSF_CLOSE, there is a loop at a smartform. The output prints each smartform in different pages. Is it possible to print the second smartform in the fi

  • Post Creation/Installation Document.

    Hello, Is there any formal template for a document, Post Creation/Installation of Oracle Database? As in Control File Locations, Log File location, Environment settings, etc. etc. that is required to be maintained after installing the Oracle Server o

  • Output not coming properly in SF

    Hi all, This is the select stmt i have written in the Program lines of Smartform. SELECT  VKORG  VBELN  FKTYP  VTWEG                FROM VBRK                INTO TABLE ITAB                WHERE  VBELN BETWEEN '0090022987'   AND                '009002

  • How to import multiple songs into iTunes

    Hello there... I am fairly new to iTunes and am becoming frustrated with this particular issue. Prior to using iTunes, I used Kazaa, where whenever a song was added to My Shared Folder, Kazaa would update the library instantly. I want to have the sam

  • SMTP Dispute !!

    Hello fiends, Recently, I made one SMTP server (in Java) and showed it to my college teacher. He said my server is wrong. Teacher said 1) There is nothing called SMTP receiver, that is, SMTP can only send emails and can never accept emails. Only POP3