Power BI Solution Packs

Hi.
I saw the MS WPC Salesforce demo, and solution packs were mentioned these include: data, connectivity to the data sources, visualisation and interactive reports.
Q: How do we build these solution packs for Power BI as pre-packaged analytical apps? Is there an MSDN article? Any related documentation?

Thanks Ed.
Do you have an ETA? Can we replicate the functionality in a manual process?
Public Preview:
http://blogs.msdn.com/b/powerbi/archive/2014/10/13/announcing-power-query-support-for-salesforce-com.aspx
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Similar Messages

LIO solution Pack in EP 3.5

Can you explain the difference between LIO currently in the GSM module versus the LIO solution pack described in the EP 3.5 ?

This is the new release vehicle for LIO, so all new features and bug fixes will now be delivered through this solution pack. There are a lot of new features in the LIO solution pack. There is an overview video that covers all the new features on the collaboration site. We also list the enhancements in the EP 3.4 release notes. Take a look and let me know if you have any questions.

HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

TS5148 Apple TV turns on with no picture...pulling power only solution

Every time I switch to my Apple TV I get a blank screen on the TV an no amount of button pushing or TV "changes" fixes it. Only fix is to pull the power plug on the ATV.
Ideas?

Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
Here is a link to the other thread I was referring to above:
https://discussions.apple.com/message/19952545#19952545
Have you applied the latest firmware updates to your ATV 3's?

23" Display Power cord solution

Suddenly my display wouldn't work! After reading several posts about the dreaded dead display, I decided to change the power cord. Although I had never looked at it, I thought it would be an expensive replacement. Much to my surprise, it turns to be a standard D-plug. Slapped the "new" cord into the power supply and viola! My display is up and running. I hope this helps anyone with the sudden loss of the big screen.
LarMan

So I still haven't had this happen to me since I changed things around in my prefs, and it was happening before that usually twice a week. I posted a couple of images of my settings here http://homepage.mac.com/reaction/mactree/PhotoAlbum6.html
I doubt it's solving the problem, but somehow it is preventing it from happening. I read that you had tried one of these settings and it didn't work for you, so it's hard to know.. though I'm sure we're experiencing the same problem.
Also, I upgraded my graphics card to the x1900 and if I remember correctly, my mac was doing the same thing with the previous stock card.
thanks for the update on your situation
nick

[Poll] Power Management Solution?

Hi
What Screensaver / Power Management applications do you use on your laptops?
I'm very curious because I'm not totally satisfied with my choices: XScreenSaver + Gnome Power Manager.
The big problem is that gpm doesn't blank screen when xscreensaver is started so I need to use xscreensaver power management too (but I can't use only xscreensaver because it lacks many power management features I need)...

To automatically control CPU speed:
cpufrequtils http://wiki.archlinux.org/index.php/Cpufrequtils
To enable hibernate:
pm-utils http://wiki.archlinux.org/index.php/Pm-utils
I use GNOME. I disabled the screensaver but have the screen turn off after 30 minutes of no use.
I had a lot of fun setting up cpufrequtils by following the wiki. I was disappointed when I went to set up hibernate via pm-utils, because after installing the package and testing it, it just worked. Where is the Linux I used to know??

HT4106 How do I use a midi keyboard on GarageBand with my iPad? When I try it says the device cannot be used as it requires too much power. However, I have given the midi it's own power source.

How do I use a midi keyboard as an input device on garageband? Its an oxygen 61 board. I'm using an iPad camera connection kit and a separate power source for the midi but each time it says it cannot use the midi as it requires too much power.

I have the same problem with my iPad and 61. Sometimes it says device not supported and sometimes it rants about power - any solutions anyone ?

Can't locate power distribution options for 220v v490

We have purchased several v490s and discovered they require 208v power. We have not been able to locate a power strip/pdu that we can put in the rack and get power from the floor (L6-30) into the rack at the appropriate voltage. Clearly w/ so many v490 owners in the world, there is a solution, but no one has yet seem to be able to provide one to me.
What power distribution solutions have you used to provide 208v power into the rack for the servers?
thank you.
David Kushner

We use 208v for our Storagetek 6140 disk arrays, and use power distribution strips from APC.
See: http://www.apc.com/products/family/index.cfm?id=136

Remote Power Switch

Greetings!
I have a G5 Quad that I love, but not the noise or the heat. In the basement just below where the computer is I have a workbench with a workstation already sitting there that I use remotely whenever I need to do something Windows only.
I've found several locations to purchase a long DVI cable and will get an external firewire CD/DVD and already have a firewire/USB hub and a conduit run through the wall from the basement to upstairs. All I need now is a way to turn it on from upstairs. Does anyone know of a remote power-on solution that would work with the G5?
Many thanks in advance!

Hi. Some previous suggestions here
http://discussions.apple.com/thread.jspa?messageID=3158100#3158100
Good Luck.

Catalyst 2955T-12 Power Supply n IGMP Snooping

Hello everyone,
I have Two Catalyst 2955T-12 switches, on this switch there are Two Power Supply (DC) options...I want to implement redundant Power Supply solution, can this Two DC Input on Switch will give this solution or I have also external Din Rail power supply...my question is how I can implement redundant power supply so that if one PS of switch fails then automatically other will start?
Also can any body tell me what IGMP snooping do? do I need to configure it? also the command (I need global command as well as port/interface based command)?
Regards,
Shahid

For the power redundancy question, I believe this link will help:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea2/2955hig/hginstal.htm
Also can any body tell me what IGMP snooping do? do I need to configure it? also the command (I need global command as well as port/interface based command)?
>>Layer 2 switches can use IGMP snooping to constrain the flooding of multicast traffic by dynamically configuring Layer 2 interfaces so that multicast traffic is forwarded to only those interfaces associated with IP multicast devices. As the name implies, IGMP snooping requires the LAN switch to snoop on the IGMP transmissions between the host and the router and to keep track of multicast groups and member ports. When the switch receives an IGMP report from a host for a particular multicast group, the switch adds the host port number to the forwarding table entry; when it receives an IGMP Leave Group message from a host, it removes the host port from the table entry. It also periodically deletes entries if it does not receive IGMP membership reports from the multicast clients.
The multicast router sends out periodic IGMP general queries to all VLANs. When IGMP snooping is enabled, the switch responds to the router queries with only one join request per MAC multicast group, and the switch creates one entry per VLAN in the Layer 2 forwarding table for each MAC group from which it receives an IGMP join request. All hosts interested in this multicast traffic send join requests and are added to the forwarding table entry.
IGMP Snooping is by default Enabled globally and per VLAN. If for some reason it is not enabled, "ip igmp snooping" at the config mode to enable it.
There is nothing else to configure.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950scg/swigmp.htm#wp1020034
Please rate helpful posts.

Power on off problem

My hp 2060 printer power cable and power cord both r working but printer not start and also printer on off button not show any indicator light

Hey @arshad1985,
Welcome to the HP Support Forums!
I understand that your HP Deskjet Ink Advantage 2060 All-in-One Printer will not turn on. I am going to offer the standard 'no power' troubleshooting steps for you to go through to see if you can get this issue resolved.
The HP Printer Won't Turn On or Respond When the Power Button is Pressed
For your specific printer please run through the following steps:
Solution one: Plug the printer directly in a wall outlet:
HP Printers perform best when plugged directly into a wall outlet. Power strips and surge protectors can cause printers to lack power and not function properly. To ensure that lack of power is not causing this issue, please plug your printer directly into a wall outlet if it is not already.
Solution two: Make sure that the wall outlet works:
Always ensure that the wall outlet that you have a product plugged into works properly. I doubt this is the case as you indicated in your post that the power adaptor and power cord are working.
Solution three: Make sure that the power supply is compatible with the printer:
Ensure that you are using the power adaptor and cable that came with your printer. Your product uses an external power supply and cord. Generally there is a light on the power supply to indicate that the supply is getting sufficient power.
Solution four: Reset the power module, and then test the power:
The power module has a safety feature inside that protects the printer during a power surge. If you experienced a recent power surge, the power module might need to be reset. Use the following steps to reset the power module:
Disconnect the power cord from the rear of the printer.
Unplug the power cord from the wall outlet, power strip, or surge protector.
If the printer uses a power module with a detachable power cord, disconnect the cord from the power module.
Wait 15 seconds.
If the printer uses a power module with a detachable power cord, reconnect the power cord to the power module.
Reconnect the power cord to the rear of the printer.
Plug the power cord directly into a wall outlet. Do not use a power strip or surge protector.
Check to see if the power module or the power cord has an indicator light and if it is on.
NOTE: Not all external modules or cords have an indicator light.
Indicator light on an external power module
Indicator light on a power cord
If the light appears, try to turn the printer on again. Do not hold the power button down.
Solution five: Test the power with a compatible power cord from a different printer:
If you have another product that uses the same power cord please try the working power cord in your printer to ensure that your power cord is functioning. Occasionally your power supply may be fine but the cord the goes from your supply to the printer may be defective. Testing the power cord is a good way to verify if that power cord is actually functioning.
Should the power supply and power cord be functional but the printer still fails to power on than it does appear that you have a hardware failure on your printer. Should this be the case I would recommend that you contact our Technical Support queue by phone to explore additional options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
Please let me know if these steps work for you. I wish you luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

XServe Raid lost Array #2 after power outage

Hi..
I've had an unfortunate incident with my XServe RAID.. it lost power, and when restarted array 1 came up, but #2 is showing the drives' status as all "spare" and no configured array.
Our first thought was to use the "recognize array" utility in Raid Admin, but (after upgrading to the latest firmware) when choosing either controller the recognize button is greyed out, as if it doesn't want to. If i'm reading the support docs correctly, the drives might actually need to be showing as "available" rather than "spare" - but I'm understanably hesitant to just issue the make drive available command in case that hoses the data that (we hope) is still on the drives.
other details are that array 1 is connected to an Xserve and array 2 (should be) talking to a win2k3 box, via their respective FC interfaces. the power outage was uncontrolled and affected all machines (UPS failure) and startup was also unattended which is worrying me that the 2k3 box might have done something to array 2 on the way back up.
naturally i'm googling this one like crazy but haven't yet found any relevant info. hoping a suggestion or two here might set me in the right direction?
not a nice way to spend a weekend - but at least i have until monday morning to sort it..
thanks in advance..

Thanks for the feedback - unfortunately we'd already tried the complete power-down solution and no go. One thing i found out in the process was that we don't have the battery backup units installed, I think that might be a wise investment for next time.
We found a number of similar posts on the subject.. http://discussions.apple.com/thread.jspa?threadID=1471056&tstart=165 and http://discussions.apple.com/thread.jspa?messageID=5949583&#5949583 and in the end just went with recreating the array and restoring from backup - it seems like the only option in this case... so i'll mark this thread closed.

My Lenovo n200 3000 power on problems..plese read more for full error story.

My lenovo n200 3000 on switches on when i press the power button wait for the windows sign to appear. it then shuts down. then i press the button again and select start windows normally. i have to do this 3 times every time i switch on my laptop on!!! please help this is very annoying.

This one looks like a hardware/software conflict. Go to service or you can try to do something yourself.
I can give these advises:
It can be software problem, so you can do this:
1. You can restore your OS with last saved (fully working and starting) restore point.
OR
2. You can try to start Windows in SafeMode and: 1) try to find coflict driver in My Comp>properties>device manager (look for yellow "!"); 2) try to delete all lately installed drivers.
OR
3. You can reinstall Windows in "clean" install. I mean with disk format.
OR it may be hardware problem, so you should do this:
1. It may be problem with power.
Solution:
   - Try to start laptop without battery. Just with AC-adapter.
   - Try to start laptop just with battery.
2. Maybe some detailes get out from slots.
   - You should open laptop and check every detail (hdd, ram etc). Get them out clen it and than put them in.
N.B. In my desktop PC such thing was because of "Microsoft UAA High Definition Audio driver". It conflicted with my video. Also in my old laptop it was because my lcd was not fully plugged in.
If nothing of these solve the problem go to the service.
If you need translating agency - contact with me!

Recommended Reading?

David Power’s books have been mentioned a few times in
various forums. Which of his books, and/or other authors, are best
for dynamic web site development for beginners? Thanks.

There are also many online resources
As well as the links below - another way to learn (including
anyone else's bad habits) is to find a page you like, and then tell
your web browser to show you the code view for the page and/or do a
"Save As" and save the page to your computer to then copy &
paste code segments into your file (in IE click View at the top,
select Source from the options)
HTML and/or DW Tutorials, and other information links that I
have saved
http://validator.w3.org/
http://www.visibone.com/
http://www.cushycms.com/
http://www.w3schools.com/
http://www.hotscripts.com/
http://www.projectseven.com/
http://www.adobe.com/devnet/
http://www.scriptarchive.com/
http://www.htmldog.com/guides/
http://www.htmlcodetutorial.com/
http://alistapart.com/topics/code
http://www.how-to-build-websites.com/
http://css.maxdesign.com.au/floatutorial/
Download User Guide as PDF for easy search
http://www.adobe.com/support/documentation
http://www.ianr.unl.edu/internet/mailto.html
http://lynda.com/ Hours of videos.
(must pay)
http://apptools.com/examples/pagelayout101.php
http://www.thesitewizard.com/archive/css.shtml
http://www.projectseven.com/tutorials/index.htm
If not PDF (link above) an online guide to read
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/
Customizing the layouts that come with CS3 (VIDEO)
http://www.adobe.com/designcenter/video_workshop/?id=vid0155
FormMail
http://www.bebosoft.com/products/formstogo/index.php
For those using MySQL - Installing PHP and MySQL on Windows
XP
http://www.webassist.com/professional/products/solutionrecipes.asp
Community MX lessons
http://www.communitymx.com/abstract.cfm?cid=3D074
http://www.adobe.com/cfusion/designcenter/search.cfm?product=Dreamweaver&go=Go
The Contact Form Solution Pack is only $29.99. To learn more,
visit
http://www.webassist.com/go/cfsp
Troubleshooting Javascript errors in Dreamweaver
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19105
Sending responses from web page via email
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1386809&enterthread=y

Need win 8.1 installation from disk on yoga 2 pro instructions

I need "idiot-proof" instructions (I'm quite technical, but believe in clear instructions) for reinstalling win 8.1 on my yoga2 pro. My Windows Update stopped functioning during an update cycle and it would not repair during restore/reset. I have the four installation CD's from a problem Lenovo created earlier (i.e., it was free) and have istalled it before. I just don't remember how to get to everything (BIOS) and what settings.

I did try removig the Lenovo energy management software, but that didn't work. I also then reinstalled and tried setting it to Performance mode. However, I didn't look for a Windows power mgmt solution.
What's weird is that after I powered down and used the Novo button to check the BIOS version (just to confirm what I said earlier), when I restarted Windows again I did not see the Hyper-V error message. I haven't restarted again, but will check again tomorrow morning when Windows starts again.

Power BI Solution Packs

Similar Messages

Maybe you are looking for