Power Book Gr 10.2.8, have bought Tiger, how can I install Tiger?

Having read many other topics I am checking in for clarity
To download Tiger successfully (I have enough space etc etc)
I must first install 10.3. - How do I do that?
Then I must install the next in line etc etc???
Please shed some light!!!

georgie:
It will be helpful if I had a bit more information about your computer system, so I will ask questions.
You have a PowerBook G4, is that correct?
Which PB G4 do you have? Processor speed?
You have sufficient HD space. What is the total capacity of your HDD and how much available space do you have?
You have enough RAM. How much?
You have bought Tiger install disk. Is it the full Retail Version for a Power PC mac?
Here are the minimum system requirements for Tiger. I suggest a bit more RAM than the minimum.
I must first install 10.3. - How do I do that?
No, you don't need to install Panther (10.3x) if you have a Full Retail Version of Tiger. The only time you will need Panther on your HDD to install is if you have an update disk. However, Computer specific or upgrade versions should be avoided since they are optimized for the computer to which they are specific and will therefore, very likely, cause problems during or after installation. On the legal side, it may be a violation of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...
Please post back with information requested, then we can proceed with directions for installation.
Cheers
cornelius
Message was edited by: cornelius

Similar Messages

  • My computer has been rebuilt due to a virus and I have lost all the music I have bought.  How can I get it back please.

    Due to a virus on my computer I have had to have it re built and now all my music I have bought is gone.  How can I get it back again please.

    If for some reason you have failed to do the basics and backup your computer, then you will need to redownload ( if this is available in your country):
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Or you could transfer from an ipod:  File>Transfer Purchases

  • I have a Macbook. how can i install windows 10 on it?

    i have a macbook and im trying to figure out how to get windows on it? i dont have a windows 7 disc i have a windows 10 disc would that still work?

    Hmmm, Windows 7 is the latest version.  Not aware of any Windows 10.  You cannot install Windows on the Mac without a retail Windows installer disc - XP w/SP2 or later.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    6. Last is Q.  Q is a freeware emulator that is compatible with Intel Macs.  It is much slower than the virtualization software, Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How can I install Tiger upgrade on Power Mac G5?

    I have PowerMac G5 with OSX 3.9. I bought retail disk of Tiger but it will not install as upgrade. It goes past the restart process but stops shortly after installation begins with message telling me that installation failed. I originally bought Leopard and encountered same problem and then bought Tiger thinking that I might need to upgrade to that first. Here are the specs for my computer:
    Machine Model: Power Mac G5
    CPU Type: PowerPC 970 (2.2)
    Number Of CPUs: 1
    CPU Speed: 1.6 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 2.25 GB
    Bus Speed: 800 MHz
    Boot ROM Version: 5.1.5f2
    Serial Number: XXXX
    GeForce FX 5200:
    Type: display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 64 MB
    Vendor: nVIDIA (0x10de)
    Device ID: 0x0321
    Revision ID: 0x00a2
    ROM Revision: 2060
    Thanks much!

    Hi Mobe!
    Is the disc the Full Retail Version, of the Tiger Install DVD, that does not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on it?
    If not, you can order the correct Tiger 10.4.x installer from Apple Phone Sales 1-800-692-7753, for $129.00.
    That model of PowerMac G5 should also support the Leopard System Requirements, if you use a Full Retail Version of the Leopard DVD.
    The Full Retail Version, of the Leopard Install DVD, can be purchased at The Apple Store (U.S.).
    ali b

  • I have an iphone5 how can I install adobe flash player

    I have an iPhone. 5 how do install adobe flash plush. I'm so frustrated :(

    NO smartphone from ANY manufacturer, is compatible with Flash... at all

  • Lost my CS3 install CD, but still have license. How can I install on new computer?

    I have a CS3 Photoshop license and serial#, but lost my CDs.  It looks like I can download at http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html, but I keep getting this error: HTTP ERROR: 404 /support/downloads/dlm/main.jsp.  Does anyone know where else I can get a copy of the media?
    Thanks for any help!
    -BK

    Ha!  It's a bad link from Adobe.  All the other downloads appear to go to http://trials2.adobe.com, but the CS3 downloads go to http://esd.adobe.com for some reason, and this does't exist.
    So I copied the link and switched it myself:
    Bad link for Photoshop CS3  http://esd.adobe.com/Applications/Photoshop/CS3/Mac/ADBEPHSPCS3_WWE.dmg:
    Good link for Photoshop CS4 http://trials2.adobe.com/dlm/Applications/Photoshop/CS4/Mac/ADBEPHSPCS4_LS1.dmg
    Manually typed link for Photoshop CS3 that lets me download the ADBEPHSPCS3_WWE.dmg file:
    http://trials2.adobe.com/dlm/Applications/Photoshop/Mac/ADBEPHSPCS3_WWE.dmg
    HERE'S THE CATCH.
    You must go to the first link first, and get the download error.  From there, you have to paste in the manually typed link, otherwise you get file not found or you don't have permission errors.
    Incidentally, this file appears to be the same file linked to from:
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    This worked for me!

  • Hi,i have macbook pro ,,how can i install snapchat for my mac

    how to install snapchat for macbook pro

    I don't think Snapchat offers an app for the Mac; however, there is a third-party alternative: "Snapped" http://thnkdev.com/Snapped/
    This is a THIRD PARTY OPTION.

  • I had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives

    i had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives. can i put the drives in external cases and plug them all in, will the imac see them as a raid slice then  help please

    Before you have another accident:
    Buy a UPS of good quality and sufficient to your needs.
    I would have to assume that the drives were connected to a PCI PATA card, hopefully. Otherwise, well RAID and having drives on the same bus (master and slave).
    And no backup, none at all...
    Get your hands on a G4.
    Data Rescue 3 from Prosoft maybe.
    If they were SATA and running on PCI SATA controller, very popular and common really in G4s, more options would be open.

  • HT4865 I just bought this ipad and cannot log out from icloud because i dont have the password.how can i log out from icloud?need help

    I just bought this ipad and cannot log out from icloud because i dont have the password.how can i log out from icloud?need help

    You need to return it to the seller and get your money back.  You cannot reset or use the device with another AppleID installed unless you know the password for that ID.
    If the device has been jailbroken, no one on here can give you any further help...the Terms of Use prohibit us from doing so.

  • I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

    In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

    Here is a copy of the error
    This means : Installation failed.
    Verification of the Adobe Software failed
    The product you want to install is no valid Adobe product and seems to be falsified.
    HUgo
    Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
    I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Hugo please turn off your e-mail signature.
    If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files.  You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    To download a fresh copy of the installation files please see Download CS6 products.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?, I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?

    I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,

    Try starting in safe mode:
    Ciao.

  • Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Hello,
    You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
    http://support.apple.com/kb/HT1661
    Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
    We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

  • I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    Thanks for your quick response. I thought I had tried that but I must not have because it worked perfectly.

  • I already have bought Photoshop Element13; I already installed the trial version of Photoshop Premier 13. Question: How much would it cost to buy Premier 13?

    I already have bought Photoshop Element13; I already installed the trial version of Photoshop Premier 13. Question: How much would it cost to buy Premier 13?

    Rochar
    This is not Adobe. Rather user to user.
    What did you do....purchase an online download of Photoshop Elements 13 from Adobe. Are you within 30 days of the date of that purchase?
    In that case, please direct this question to Adobe Chat Orders to sort out the details of the purchasing situation and what you would like to do. Consider
    clicking on the following link for Adobe Chat Panel Orders...
    Contact Customer Care
    Premiere Elements
    Membership, Account, Payment
    Payments, Invoices, Orders
    Chat Panel
    If the link does not hold its set, you will need to navigate to the Chat Panel using the above titles as guides.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • I bought a student version of CS 5 a few years ago, and just got a new computer (a MacBook Air).  The computer doesn't have a CD drive, so how can I install my CS 5 onto my new computer?

    I bought a student version of CS 5 a few years ago, and just got a new computer (a MacBook Air).  The computer doesn't have a CD drive, so how can I install my CS 5 onto my new computer?

    Download CS5 products
    Mylenium

Maybe you are looking for

  • I tried to invoke WS from BPEL process

    I tried to invoke WS from BPEL process. And error occurred when I deployed the process. Error: [ERROR ORABPEL-10902]: COMPILING FAILED. [NOTE]: IN "bpel.xml", XML syntax analysis failed. The reason is "Part Element not defined". In "http://192.168.0.

  • Why is itunes skipping like a CD since Downloading Version 12

    I have never had this problem with any prior release of itunes. I downloaded the new 12 version yesterday 10/20/14 and immediately had issues with all music skipping like a scratched CD. This includes music from my library as well as itunes Radio sta

  • Auto logins on websites no longer working

    I recently (a couple days ago) got a pop-up on the lower part of my screen that said that firefox was going kind of slowly or something along those lines and said if I would like to fix this that I could click this button. Well I did that and it took

  • How to change the position of a notation from treble to bass clef?

    hi there, i am trying to print out a score from GB '08 that looks more like a piano score (with red hand notes on the treble clef and left hand notes on the bass clef) but can't seem to find a way to do it. can anyone help? thanks!

  • Problem in Sapscript , After creating a copy of Standard Script

    Hello friends,                    I have copied a standard script WASCHEIN into ZWASCHEIN, now all the data is coming from driver program SAPM07DR. Now there is one field which is not coming from the standard program,                   Is there any w