Power , but will not start

I have an IBM t43.
Last night left in hibernate and went to sleep.
Will not start today. 
When plugged in power light showed yellow, but is now green, but flashing.
I have remove battery, hard drive, cd and memery and rep-laced. but will not start. no power. no noise
Please some suggestions
 Steve
[email protected] 

Welcome to the forum!
Let's try this: remove the battery, hard and media drives. Unplug the AC adapter. Press the "power" button 10 times in a row, holding it down for 10 seconds each time and 30 seconds the last time around.
Plug the AC adapter back in and try to power on.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • My macbook pro will turn on but will not start up.

    My macbook pro ['08 Silver keys] will turn on but will not start up. Screen is black and keyboard is unresponsive, besides power button. Help!

    ugh, no chime is not good, as that means it is not getting past the firmware POST phase.  Is the sleep light blinking fast?
    One thing to try is to access the RAM slots, remove, then replace and reseat the RAM.
    http://support.apple.com/kb/TS1365?viewlocale=en_US

  • I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

    I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Dowload help queues up but will not start. Any ideas?

    My download helper places a download in the queue but will not start. I have a linux machine and a windows machine they are both doing the samething. A friend who has three computers has the same issue on all three. Any ideas. We have refreashed firefox. Reinstalled download helper and set all the updates. I have set all the conversion points as directed as well.

    See:
    *https://addons.mozilla.org/firefox/addon/video-downloadhelper/
    <blockquote>We are aware of downloading issues when using Firefox 36.
    We have been working for months on a 100% new version which works on Firefox 36+ (it does not work on Firefox 35 and below) and we just released a first test version. If you want to test this version and provide feedback on it, please follow this link.</blockquote>
    You can find a beta version here:
    *https://groups.google.com/forum/#!forum/video-downloadhelper-5

  • PSE 9 was running fine but will not start now and I get the following message:  This application has requested the Runtime to terminate in an unusual way.

    PSE 9 was running fine but will not start now and I get the following message:  This application has requested the Runtime to terminate in an unusual way.
    I have an HP Desktop running XP Professional and tried Restore but it didn"t help. I was just going to uninstall and re-install but I can't get in to deactivate.

    See if anything here helps:
    Troubleshoot C++ runtime errors | Adobe products | Windows

  • Power mac will not start

    my brother just bought the new 27inch imac and was going to migrate from his power mac. his power mac is now dead. it will not start at all. any ideas

    I decided to get a hard drive enclosure. I chose the Mercury Elite Pro...highly recommended in my Mac magazines.
    The ones from OWC are easy to put drives in, even for a beginner. Easy to understand instructions and they back up their merchandise 100%, no questions asked. Now if a drive goes bad, I can put a new one in the enclosure in minutes (or put a bigger one in). Mine works great!
    But make sure you get an enclosure that uses the PowerMac drive. Since you did not tell us what model he has we can not advise as to which one he needs.
    Once the Migration is over, he can reformat the drive to GUID (for Intel) and use it as a backup drive....always needed! DALE

  • Mac powers up but will not start up

    i have a mac pro that powers up but will not boot up

    Unfortunately not a good sign...
    See Here for Details...
    Grey Screen on Start Up
    http://support.apple.com/kb/TS3148
    Resolve Startup Issues
    http://support.apple.com/kb/TS1417

  • Phone flashes but will not start

    the phone is flashing at the start screen white than blue than red and will not start and powers down if unpluged i guess the battary has died but will not let me start to the connect to itunes either.

    Hello, rockinrolla. 
    Thank you for the question.  You may find this article helpful in troubleshooting your issue.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If the issue persists, see step 6 of the article.
    Regards,
    Jason H.

  • HT201412 My iPad will not boot up, has a think logo running but will not start. Any ideas?

    My Ipad will not boot up, has a think logo running all the time...any ideas. Also had trouble upgrading to ios.6 the computer is not the original one I synved my ipas too. It started OK then failed. Now it will not connect at all to computer...comes up with an error.!!!

    Try DFU Mode Restore. Open iTunes on computer, connect iPhone to computer. Hold both Home and Power buttons for exactly 10 seconds, release Power button, keep holding Home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds time. Restore iPhone Firmware.

  • System has power but will not load up to bios.

    system will not load to bios after i just installed the mother board. power and ever thing else seems to be working, but it still will not boot; even to bios. i have a neo pt8 can any one help me give me hints of what might be worng once i get it to bios i can take it from their. my aim is caperneoignis
    my system specs are
    p4 1.6ghz 256 cache 400mhz 478 pin
    samsung 512 ram ddr 266
    singel IDE 100 7,000 rpm westren digtal hd
    nvida geforce 4 128mb couldnt rember the exat make
    sound blaster auidgy gamer
    450 watt turbolink switching power supply
    +3.3/28A +5/40A +12/18A
    mother board is a pt8 neo
    if you need any more info let me know

    Read and post all the info asked for in this  Moan Guide

  • My ipod touch 3g displays logo and low power but will not turn on

    My Ipod 3g displays the apple logo and the low battery screen but it will not turn on.
    Help please?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    Also maybe here:
    See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Computer beeps but will not start. Was gone a month, left it unplugged.

    So I unplugged my Mac Book Pro, left town for a month, it started for a bit, then screen went blue. I shut it down, and now it will not restart
    it makes a beep sound I've never heard!
    any restaert suggestions?
    Thanks!!!
    Ben

    See if these articles are of any assistance:
    http://support.apple.com/kb/TS1367
    http://support.apple.com/kb/TS1587
    Ciao.

  • IBook G3 800 GHz will work on battery power but will not turn on with AC pl

    This iBook will function with a battery, but when the AC is plugged in it does nothing. It will not turn on. Is this a logic board problem or maybe a short or something not connected inside for the AC plug?

    It's a rather complicated repair:
    http://www.ifixit.com/Guide/Repair/iBook-G3-12-Inch-DC-In-Board/134/1
    Apple doesn't consider it a do-it-yourself job.
    Expect to pay $115-$145 for the repair (plus shipping if you have to send it away). The iBook may not be worth the repair, so some people are trying to do it themselves.

  • Hp pavilion dv7 is on power but does not start

    Hi all, 
    I have an HP dv7-4169WM. When I connect it to power, no LED lights flash or anything, but I know it is powered (tested both on adapter and battery, separately) because if I connect anything to it, like my kindle, it is being charged (which is weird because why would my computer do it if it's turned off?). 
    So anyway, I know it's not an adapter and/or battery issue because of the above, however, the computer doesn't turn on. When it's on AC, the light doesn't turn on or anything. It did turn on once and there were plenty of long beeps (after checking the forum, I see that this probably has a meaning). It was acting all up but I still managed to install new software updates (ridiculous I know, but I thought maybe that would help). Then it restarted just fine, no beeps or anything. Then I turned it off and disconnected all components including the power adapter. The next day, dead (well, not completely, seeing how it still charges my kindle or phone). And since then I can't turn it on at all. Any ideas?
    Many thanks in advance!

    Hello apri,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    The issue you are describing appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
    US support link to contact options for HP products purchased in the US.
    Outside of US support link to contact options for HP products purchased outside the US.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Pavilion dv6 - laptop receiving power but will not power on

    Pavilion dv6-6c53cl
    Windows 7
    As of earlier tonight, I can no longer power on my laptop. (I powered it successfully earlier today.) When the power adapter is plugged in, the indicator light on the laptop next to the power connector socket turns on, so at least the laptop is receiving power. I've tried removing the battery and disconnecting the adapter, draining the power, and reconnecting the adapter with and without the battery in, and in various orders. I've also tried removing and reseating both RAM sticks and the hard drive, all to no avail. Any suggestions?
    This is the fourth major failure of this system---the first three were a fan problem just weeks after purchase, a hard drive failure, and another fan problem---since I purchased it 22 months ago, and I feel I've bought a lemon.
    I'd like to avoid taking this in for repair if possible, because the local repair contractor (I live in Australia) badly bungled the previous repair: They took several weeks even to start on the repair, failed to fix one problem, and introduced a second, more severe problem (a keyboard failure, which somehow they didn't test despite apparently removing and reseating it when fixing a fan problem). I asked HP support about this, and the rep said there were no other shops near where I live that do in-warranty repairs. Please help!

    Can you post the different things you have tried and Current version of OS on this notebook?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

Maybe you are looking for

  • Problem with brushes in PSE 9

    My brushes in PSE 9 seems to live a life of their own. Eks: I click in my photo with the eraser/dogde/clone and so on.. and the "work" is done in a different place in the picture. Hope you understand my explanation. Does anyone know what to do about

  • BADI ME_GUI_PO_CUST in PO Creation

    hello people, I am having some trouble implementing BADI ME_GUI_PO_CUST. i have this code in my subscribe method. CHECK IM_APPLICATION = 'PO'. IF IM_ELEMENT     = 'ITEM'.   CLEAR RE_SUBSCRIBERS[].   LS_SUBSCRIBER-NAME = subscreen1.   LS_SUBSCRIBER-DY

  • Importing data to table from excel

    hi, Is it possible to import data from excel to an oracle table using a stored procedure? database used : Oracle 11g Joseph

  • Help With Rollovers in Email

    History: In the past, my company has used Imageready to create basic html code. We are using this to create e-mail flyers and ads, and rollovers are CRUCIAL to my boss's way of thinking. Problem: Dreamweaver creates code that will not render rollover

  • Can we erase .dmg files once the program has been installed?

    Are the Disk Images and the .dmg files necessary to keep on your computer once you've installed the software? I mean does the program (any) have to access this 'placenta' in order to do it's job/ get more information? Is it continually exchanging dat