Power button does not respond to wake up

Hi my xperia Z power button is unresponsive for unlocking my fone, for some reason it allows you to lock it but not unlock, so every time I want to use my phone I have to connect the charger

Try performing a system repair as this will often fix issues - This will factory reset your phone
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • Updated to IOS 8 and now power button does not respond and screen is frozen with apple logo.

    Updated iPad to IOS 8 -- screen locked.  Now screen is frozen with apple logo and the power button is not responding.
    Thanks for any help!

    That is normal while it is loading the update. Give it some time(shouldn't be more than 40 minutes). If not, hold the home & sleep/wake button until it is black, and then it restarts.

  • Ipod Touch 3g power Button Does not respond!

    Greetings Friends...
    power button is not responding... i had a JailBreak i don't know if has something to do whit the problem, I already Reset  my Ipod  and still does not work...
    please Help....
    :3

    Jailbreaking can have unintended consequences,

  • Power button does not respond to put phone on sleep mode

    Any way to resolve or common issue

    Try performing a system repair as this will often fix issues - This will factory reset your phone
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • My iphone 5 power button does not respond do you think they will exchange it for a new one?

    help do you think they will exchannge it?

    For the second time: Take it in for evaluation. Maybe they will: maybe they wont replace it. Only they can determine that after examining the phone. Endless redudant and circular questions will NOT solve your problem.

  • Power button does not react iMac Core Dua 20"

    Hello,
    I just purchased an iMac 20" intel Core Duo. I leave the machine to go to sleep during the night. Almost everyday when I want to start the next day my iMac does not wake-up pressing "enter", moreover the power button does not even respond. I have to unplug the power cable and after a few seconds the powerbutton can activate the Mac again. Can anybody help or should I immediately return for repairs?
    Erik

    Welcome to the Apple Discussions.
    One question. Is your iMac a Core Duo (no longer made) or a Core 2 Duo?
    Try resetting the System Management Controller;
    Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller

  • Froze on black screen and power button does not work

    my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
    any suggestions would be appreciated

    - iOS: Not responding or does not turn on
    Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Iphone 4 home button does not respond, resetting fails to resolve issue

    the home button does not respond. i tried putting phone to sleep and waking up with home button (which worked, but then the home button does not return the screen to home page), a hard reboot with the home and power buttons, and finally a reset to factory settings and then synching again to my computer. the problem persists. 

    Bring it in for replacement.

  • Button does not respond (with attachment)

    Hi,
    I'm trying to develop a LV program for a psychology experiment to record a participants mouse movements whilst drawing or tracing a picture using the mouse.
    My program uses an event structure to generate an event each time the mouse is moved or the mouse button is pressed or released. Upon each of these events the coordinates and button position is recorded to an array.
    When they have finished drawing there is a button "Stop & Save" that allows the user to save the coordinate data to a file. This can then be opened by a sister program I'm developing that allows the movements to be replayed and shows where the mouse button was down and up.
    At the start of the program there is the option of loading a background jpeg picture to trace over on the screen.
    The program then waits for a 'Record' button to be pressed before moving on to record all coordinates there after until the 'Stop & Save' button is pressed.
    The problem I have is that the record button does not respond. It doesn't even change state when pressed, even though at that stage it's just sat in a while loop waiting for it to be pressed before moving on to the event structure.
    I attach the program for you to look at.
    Any help/hints much appreciated.
    Thanks,
    Dave.
    Attachments:
    MouseCoordinatesForPW.vi ‏178 KB

    altenbach wrote:
    Your overall program design is higly flawed. This calls for a single state machine with an event structure that handles all FP events. All your locals can be handled by shift regsters. Get rid of that useless stacked sequence!
    Frame 0: Initialization belongs to the left of the state machine. CoordinatesArray should initialize a shift register (no locals needed). Use a boolean shift register to set state to either recording or not. Event for "record, value changed" will switch the boolean to be used on the other states.
    Frame 1: "Clear" and "stop" need to be inside their own events. Running it parallel to the event structure is a no-no! Do you really want to record mouse movements on the entire FP or only on the picture area?
    Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes no sense.
    Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values.
    Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead.
    Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help.
    Message Edited by altenbach on 05-22-2007 09:23 AM
    Hi, thanks for your reply.
    The reason for the main stacked sequence was to get some order to the program, my programming background's text based and as such I like to think of a program running in a list/sequence order. LabView seems strange when you've been used to programming in asm or C. Does anyone know of any books or online documentation for people migrating from text languages to LV? - I haven't found any.
    "Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes sense."
    - The string 'CoordsArray' is cleared to make sure it's empty before chars concatanated to it in the next frame. Call me old fashioned but is it not good practice to clear out any junk in a variable rather than just assuming it's empty?
    "Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values." - not sure what you mean by that?
    "Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead."
    - No, it's not an empty string since in the previous frame the coordinates array is converted to numbers and concatanated to it. Trust me, it generates a file with lots of data in so no way is it an empty string!!
    - Yes, you could just swap the cases instead of inverting the 'canceled' output but sometimes it reads better to say 'if NOT cancelled then DO theTask, ELSE DO nothing' rather than 'if cancelled DO nothing ELSE DO theTask'. Not sure if that makes sense but I guess it's just personal prefference there.
    "Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help."
    - I wasn't sure how that one would work. I wanted the final exe version to close the program window when the program comes to the end, what's the best way to do that? In the past I think I used the 'Exit' function but this would annoyingly quit LabView at the end of each trial run whilst still in the development stage.
    Thanks,
    Dave.

  • The power button does not work

    i recently noticed that my original iphone power button does not work i push but nothing happens. I know that i have to fix but the problems is that the warranty is been over for long i need to know a good place to repair because the apple people said they could not fix it. I live in Texas so somewhere close would be nice.

    This link is for one 3rd party repair service you can contact for the first generation iPhone and for the iPhone 3G, which is located in Dallas.
    http://www.drcellphone.com/iphone-repair-service.php
    http://www.drcellphone.com/iphone2g.php

  • After installing Mavericks, power button does not put my iMac to sleep.

    After installing OS X Mavericks, the power button does not work as before, any help?
    Thanks
    Victor

    CT, the behavior of the power button on Mavericks (10.9.2) is not as the note (OS X Mavericks: Using the power button - Support - Apple) describe. I have to press four or five times de power button in order to put the mac to sleep.

  • Options OK button does not respond

    Firefox 5. Tools/Options window OK button does not respond. (I changed from FF4 for same reason, among others!).

    To help other users find solutions, please return to this Thread and '''Sign-in''' to the forum with your Username and Password:
    click on '''"Solved It"''' next to the reply ABOVE that '''BEST''' solved your question
    '''DO NOT click "Solved It" next to this reply

  • New mail button does not respond so can't write mail. help please?

    New mail button does not respond so can't write mail. help please?

    I am no expert, but open your mail, go to the top of your apple bar click the apple sign then force quit mail, restart and it may work.
    I had this issue before and it was resolved.

  • My iPhone 5 lock button does not respond anymore I have heard this is a common fault with the iPhones?

    My iPhone 5 lock button does not respond at all I have heard that it's quite a common problem with the iPhone are apple fixing them or do I have to pay to get it done?

    As long as the iPhone is a UK ( I assume you are in UK ) purchased iPhone from the normal authorised Resellers ,Apple and the UK carriers and those selling the Carrier's  products like CPW or Phones -4 -U etc

  • My Iphone 4's home button does not respond

    My Iphone 4's home button does not respond most of the time. Help! Is this a hardware problem or a technical problem?

    Use the "More Like This" box to your right to get your question answered.

Maybe you are looking for