Power button flashes when I try to scan HP Deskjet 2514

I first had a problem where my printer would not stop printing, even though I canceled it.  I looked it up and followed these instructions.  From the Desktop, hold down the Windows key and press R.  Into the Run window, type services.msc and hit enter.  Browse down to the print spooler service, right click it and select Properties then click on the Stop button.  Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder. Restart the computer and you should find the document(s) have been removed. I didn't know which one to delete, so I deleted everything in the folder.  Now,  my printer will print, but everytime I try to scan something, my power button blinks and it won't scan.   Please help!

Hi , I read your post and see that you were able to resolve the issue for the print jobs not cancelling out, but now you are unable to scan. I would be happy to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Download and run the Print and Scan Doctor, it will diagnose the issue and might automatically resolve it. This software will also troubleshoot jobs stuck in the queue, which you could use in the future if the issue occurs again. What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages) If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

Similar Messages

  • Power led flash when i try to start up my Mac Pro.

    I have a Mac Pro (Early 2008). I have now got a problem. I can't start it up.
    When i start it by pressing the Power switch the fans inside start to sound and the powerled beside the power swich starts flashing.
    After that nothing more happens ( i have waitind for several hours), I have to stop the Mac by pressing the Power switch.
    It looks like the Ram is OK becouse the lams on the Ram boards lights up abd then turns of agian (no indication of error);
    i have changed to backup battery and reset the PARAM and SMC with no effect. i have also removed all extra Harddisks and also
    the Graphic card to see if ther was any problems with these.
    So i guess the the flasing Power led is an indication somthing is wrong but i can't find an expanation when i search the net.

    So i guess the the flasing Power led is an indication somthing is wrong but i can't find an expanation when i search the net.
    Yes it is.
    If it is single flashes something is wrong with your ram.  A red diagnostic led may be lit on the riser that failed.
    If the flashes are in groups of 3 a bad dimm slot (or slots) were detected and there should be lit diagnostic leds next (or near) to the dimms that failed.
    Try reseating your dimm no matter how it is blinking.  But look inside for lit diagnostic leds anyhow.
    Also blow all the dust out of your machine while you are in there.

  • Power Button flashed white then turned off

    I have a hp g60 100-em laptop that I have had for nearly 6 years and this morning, the power button flashed white then then turned the laptop off! Now when I plug it in, there is no power going to the AC adapter! And it will not turn on even though there is full charge on the battery, please help!

    Doubled25377 wrote:
    I have a hp g60 100-em laptop that I have had for nearly 6 years and this morning, the power button flashed white then then turned the laptop off! Now when I plug it in, there is no power going to the AC adapter! And it will not turn on even though there is full charge on the battery, please help!
    Hi
    6 years is a decent life for a laptop & I assume its a very good laptop you have, otherwise it may not come through all these years,
    Ok, I'll try helping you here to revive him,
    I assume your laptop came with Windows Vista
    What happens when you remove the battery & connect it directly to AC adapter, is it powering on?
    Whats the age of battery - 6 years? - may be its  stopped working. Try another compatible battery if you've one, if it works a replacement of battery is warranted.
    Try doing a hard reset first
    Is it coming back?
    Still nothing is coming - then,
    Troubleshoot by following the HP documents given below promptly:
    HP Notebook PCs - Computer Does not Start (Windows 7, Vista, XP)
    If you're able to boot after doing hard reset, troubleshoot by following this:
    HP Notebook PCs - Troubleshooting Black Screen Displays with No Error Messages During Startup or Boo...
    If nothing is coming after all these, & you want it back you may give a visit to local technician to sort out the issue,
    Or Contact HP.
    Thanks,
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite.  When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

    I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite.  When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.  I am running Mac OS 10.10.1.  This only started happening when I installed the update of Adobe Acrobat.

    Hi MEW1,
    Is the printer connected wirelessly or wired?
    Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
    Close Acrobat and then relaunch it and see if it helps you while you do scanning.
    Regards,
    Rave

  • When I try to scan a document on my MF8050cn, I get a "Connect Computer" error.

    When I try to scan a document on my MF8050cn, I get a "Connect Computer" error.  I am running Windows 8.  My device is directly connected to the computer.  I can print from the computer to the printer without issue.  I get this error when using the controls on the device. 
    If I try to use the MF Toolbox - Scan Function controls, I get the following error message: "This action cannot be completed because the other program is busy.  Choose 'Switch To' to activate the busy program and correct the problem."  When I click "Switch To", it brings me to the Windows 8 tiles screen but does not resolve the issue.
    Please help!

    Hi h_rankin.
    I recommend uninstalling and reinstalling the drivers and software.  Please follow the steps below to perform the operation:
    1.  Unplug the USB cable from the printer.
     2.  Press the Windows key and 'x'.
     3.  Select 'Control Panel'.
     4.  Select Devices and Printers.  The Devices and Printers window opens.
     5.  In the Devices and Printers window, right click on the MF8000 Series and select 'Remove' to delete the printer.  Delete all of the icons for the MF8050Cn.
     6.  Close the Devices and Printers window then press the Windows key and 'x'.
     7.  Select 'Control Panel'.
     8.  Select 'Programs and Features'.
     9.  Double click on driver to uninstall.  Follow the on screen prompts.  Repeat to uninstall the MF Tool box.
    10.  Restart you computer.
    Once your computer restarts, please follow these steps to download and install the drivers and the MF Toolbox from Canon's web site:
     1.  Visit our web site at: http://www.usa.canon.com.
     2.  After clicking SUPPORT & DRIVERS in the top right corner, select your model in the following manner:
         a.  From the first menu, select CONSUMER & HOME OFFICE.
         b.  From the second menu, select PRINTERS & MULTIFUNCTION.
         c.  From the third menu, select your series, IMAGECLASS SERIES.
         d.  From the fourth menu, click DRIVERS & SOFTWARE under imageCLASS MF8050Cn.
     3.  Click the drop-down arrow and change the operating system to Windows 8 (x64).
     4.  Click on 'DRIVERS', then click on [Windows 64bit] imageCLASS MF8050Cn MF Drivers file. 
     5.  Click on I Agree - Begin Download on the next page.
     6.  When the Save As box comes up, choose Desktop and click Save. 
     7.  Once the download is complete, click on 'I Decline- Go Back' and you will return to the previous page.
     8.  Click on 'SOFTWARE', then click on the [Windows 32bit & 64bit] Tool Box Ver.4.9.1 file.
     9.  Click on I Agree - Begin Download on the next page.
    10.  When the Save As box comes up, choose Desktop and click Save. 
    11.  Once the download is complete, close all windows.
    12.  Double click the [ToolBox_4911mf16_Win_EN.exe ] file on the Desktop.  Follow the prompts to install the MF Toolbox.
    13.  Double click the [MF8050Cn_MFDrivers_W64_us_EN_2.exe] files to decompress them.  A new folder will be created on the Desktop.  The new folder has the same name as the decompressed file.  Double-click the decompressed Setup.exe file to start installation.
    14.  Once that window goes away, connect the USB cable from the MF8050Cn to the computer.  Installation will complete.
    Wait a few minutes then scan a document using the MF Toolbox.
    If you still experience any errors, or need any further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666). 
    Have a good day.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • When I try to scan from my printer it does not connect

    When I try to scan from my printer I get a message "Cannot find HP deskjet 3050 j610". But i can print from it and get printer data like ink supply. This started abruptly today. It was working OK until a couple days ago.  The printer is connected by a USB cable. I have tried updating driver and "fixing" scanning problems via HP menus without success.  If I press the scan button on the printer it says "scan error. try scan from computer" But this is what I usually do by using the compute icon on the START menu.
    This question was solved.
    View Solution.

    I've resolved the problem. The basic steps were (1) using the HP links to update my printer driver and search for errors in the scan program. (2) restart my printer and computer. After doing the first part,  I saw no results listed. Normally I would have restarted the printer and the computer, but was afraid of losing my sites and the survey so I continued to search the various comments.  I found a reference to this site in one of the post near mine for a #7520 device but cannot get back to it right now to give the author of the post. I think I sent him a reply.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00040499#N103.
    This site gives a lot of advice for various situations and devices. I followed the advice as it applied to my computer and printer which ended with step 2 (I use a USB connection) and the scanner worked  again.

  • My Ipod 4th generation is unresponsive to my touch, and will not allow lockscreen access, and also is stuck on the "Not enough Storage" button. When I try to get rid of it, it does nothing.

    My Ipod 4th generation is almost unresponsive to my touch, and will not allow lockscreen access, and also is stuck on the "Not enough Storage" button. When I try to get rid of it, it does nothing. My ipod's power button, volume buttons, and home screen button all work, and I can still use my start/stop headphones to listen to music.How do I fix this?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Screen flashing when I try to open an app.

    My screen just flashes when I try to open a couple apps that have always worked fine before.

    First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
    If that doesn't work try downloading any free app. Then reboot your iPad and delete the downloaded free app.

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • When i try to scan i get a message to update my product. How do I do this?

    When I try to scan sosmething to email i get a message to update my product. I press ok but it does not update it and it does not tell me how to do it either. please help

    adjgonzos wrote:
    HP Photosmart 7520. It didn't say anything about doing it automatically. It just said hit ok and then didn't do anything
    Have you read through your user manual for more help on this?
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • HT4847 Why is the "done" button inactive when I try to downgrade my iCloud storage plan to 5GB free? Doesn't work from iOS device or macBook system preferences. I didn't sign up for a $40 plan.

    Why is the "done" button inactive when I try to downgrade my iCloud storage plan to 5GB free? Doesn't work from iOS device or macBook system preferences. I didn't sign up for a $40 plan.

    I found the solution .,,,
    1) click on your current plan and press done your payment details will appear .
    2) the first section is your plan and there is a botton "change" click on it
    3) it will take you back to the upgrade options
    4) press on the downgrade options
    5) choose the 5 GB and the done botton will be enabled
    6) click on it  you'll back to the step number 2 , here read carefully you'll see that your changes will take effect after the current plan expired with the date.

  • Java error when i try to scan a check

    I Get a Java error when I try to scan a check for remote deposit.  Any help to correct the following error will be greatly appreciated:
    Java Plug-in 1.6.0_24
    Using JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VM
    User home directory = /Users/ginahumphrey
    Java Plug-in 1.6.0_24
    Using JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VM
    User home directory = /Users/ginahumphrey
    c:   clear console window
    f:   finalize objects on finalization queue
    g:   garbage collect
    h:   display this help message
    l:   dump classloader list
    m:   print memory usage
    o:   trigger logging
    p:   reload proxy configuration
    q:   hide console
    r:   reload policy configuration
    s:   dump system and deployment properties
    t:   dump thread list
    v:   dump thread stack
    x:   clear classloader cache
    0-5: set trace level to <n>
    java.lang.NoClassDefFoundError: Could not initialize class SK.gnome.twain.TwainManager
              at bluepoint.homescan.client.model.TwainHelper.getSourceList(TwainHelper.java:123)
              at bluepoint.homescan.client.presenter.MainPanel1Presenter.initScannersComBox(Main Panel1Presenter.java:465)
              at bluepoint.homescan.client.presenter.MainPanel1Presenter.<init>(MainPanel1Presen ter.java:242)
              at bluepoint.homescan.client.MorenaStudio.init(MorenaStudio.java:29)
              at sun.applet.AppletPanel.run(AppletPanel.java:424)
              at java.lang.Thread.run(Thread.java:680)

    Having the same exact problem! I get:
    Exception in thread "thread applet-bluepoint.homescan.client.MorenaStudio.class-1" java.lang.NoClassDefFoundError: Could not initialize class SK.gnome.twain.TwainManager
              at bluepoint.homescan.client.model.TwainHelper.getSourceList(TwainHelper.java:123)
              at bluepoint.homescan.client.presenter.MainPanel1Presenter.initScannersComBox(Main Panel1Presenter.java:465)
              at bluepoint.homescan.client.presenter.MainPanel1Presenter.<init>(MainPanel1Presen ter.java:242)
              at bluepoint.homescan.client.MorenaStudio.init(MorenaStudio.java:29)
              at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Plugin2Manager.ja va:1640)
              at java.lang.Thread.run(Thread.java:680)
    The process has worked on and off but now it never works. Someone please help us!

  • I keeping getting this error when i try to scan HVURLHandlerErrorDomain error 1003.)

    i keep getting this message when i try to scan HVURLHandlerErrorDomain error 1003.)

    Your Profile on these Forums does not list which model and version of iMac you are using, nor the verision of OS X you are using, nor which model of Scanner.  Please tell us.
    Hope this helps

  • Hello I shut my iMac down to move it to the next room when I plug it back into the wall, hit the power button nothing happens. I tried holding the power button nothing when't back to the first room plug it in where it was 2 mins ago nothing?

    Hello I shut my iMac down to move it to the next room when I plug it back into the wall, hit the power button nothing happens. I tried holding the power button nothing when't back to the first room plug it in where it was 2 mins ago nothing?

    Do you know which iMac model family you have? There are four families dating back to 1998. Troubleshooting depends on that. This forum covers the first three families made from 1998 to 2005. iMacs newer than that get a separate forum.
    Do you have the system disks that came with the computer? If so, and depending on model, you may be able to start from the CD/DVD and then make the jump to booting normally.
    All computers has a little battery on the logic board that holds date, time, and some important startup parameters when the compuer is taken off wall power for a short time. If your battery was very old and died, then the settings the computer needs to start may have been lost when you unplugged it. For some Mac modles, booting from a CD or DVD gets around this temporarily, but ultimately the battery needs to be replaced. The internal batteries are cheap but can be hard to access on some iMacs like the G4 "desklamp" model

  • I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610.

    I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610 using Adobe Acrobat Pro 11. I recently purchased the printer. I believe I ame using all of the defaults. How can I correct the problem?

    Hi,
    Both printer and computer seem to be on same network.
    Please download and run the following utility to troubleshoot on the issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
    Also download and install the firmware update from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for