Power Button - How Long Must I Hold It to Power On?

I just recently purchased my iPad and noticed that I might not be using the power button correctly.
I am able to power down succesfully without any problem, but I'm a bit confused on how long I need to hold down the power button to power up. Sometimes it seems that pressing the button once with a single 'click' powers up. Other times it seems I must press the button slightly longer before it will power up.
Can anyone comfirm how long I must press the power button?
Thanks

Hold the power button for a few seconds to power down the iPad. Press it again for s few sends to power it up again.
When the unit is on, you can press the power button to turn the screen off and put it to sleep. Pressing it again ( or the home button) will wake it up.
K

Similar Messages

  • How long must we wait for an update!

    Not long:
    http://www.adobe.com/products/flash.html

    Scooter60201 wrote:
    I went to Apple store two times
    How did your iPad work in the store?
    they say they are working on the problem. (probably a software problem) that they will have an update for it. Well my question is when?
    Next week. Or next year. Maybe sooner. Maybe later.
    How long must we wait. ... HELP apple!!
    No one at Apple who knows that answer is going to ready or reply to your post. This is a user-to-user tech support forum. I can help you get your iPad working with your current network, but that is all.
    Apple is always working on updates for all current products. If there is some way they can improve compatibility with more 3rd party routers, they will certainly do it. That is no guarantee that any potential future improvement will help you. The best solution is to replace your router with one that works with the iPad.

  • J2ME & Personal Profile - HOW LONG MUST WE WAIT

    Hello!
    I� am worry about the shipment off Personal Profile and CDC.
    How long must we wait so that Sun will decide to launch this product?!!!
    And what about Personal Java for WindowsCE 3.0 (not a beta release, a final and stable one)? There are VM that we can buy (Insignia), but the principles of Sun and Java are Open Source and free licenses not Open Source BUY IT?!!!!! Besides that this version do not support the possibility to access to MS Pocket Access Database...
    Does anyone know something about this?
    Thanks
    Marco

    Why don't you use J2SE instead, that way you don't have to wait for J2ME anymore!!!!!
    FYI... SavaJe has developed a new Java Operating System for StrongARM based devices such as the Compaq iPAQ. SavaJe supports all Java 2, Standard Edition, JDK 1.3 APIs, libraries and classes on mobile devices, and is the fastest Java platform capable of running all J2SE and PersonalJava applications at desktop performance. (over 10 times faster than running Java on Jeode based on the tests I have done).
    For more information, please visit: http://java.sun.com/features/2001/06/savaje.html
    For a free evaluation download, visit our website at: http://www.savaje.com

  • HT1420 how long must I wait to authorise a computer after de authorising old ones

    how long must i wait after de authorising computer before i can authorise new one

    No time. The Authorize Computer option will work as soon as you can reach it.
    The global Deauthorize All function(not the individual Deauthorize Computer one) won't be available for a year.
    (74067)

  • ISE - How long ISE will hold the profiled devices?

    Hi,
    After ISE profiles a device, for how long it holds that information in the endpoint identity store? Is there a purge mechanism? The reason I ask is, what if a guest comes and connects to a network and never comes back again. Will ISE hold the profiled MAC address of the device for ever?          Is there a way to purge if the MAC is not seen on the network for x days? Or is there a manual purge?
    Any help is appreciated.
    Regards,
    Mohan 

    I have an enhancement request in TAC asking for this feature. I have an ISE deployment which wants users to be statically assigned which will overwhelm the db after some time. I will have to check my notes and will forward the bug id to you.
    Thanks,
    Sent from Cisco Technical Support iPad App

  • How long will iPod hold Charge

    Let's try this question: How long should a 2nd Gen iPod hold a charge if it's fully charged and hasn't been removed from the dock?

    That depends on whether the dock is powered or not.
    If it's powered, it's constantly charging, so the answer is forever.
    If the dock's not powered, then I don't know.
    It varies by iPod model (or any device for that matter) and the age of the battery.
    The older a battery gets, the less able it is to hold a good charge.
    Scott

  • HT1918 How long is the hold on your credit card once you update your payment information?

    How long is the temporary hold before you can make iTunes purchases with your updated credit card info?

    The length of the temporary store holding charge varies by card issuer and how quickly they remove it, but is generally a few days or so : http://support.apple.com/kb/HT3702
    But even if it hasn't been removed you should be able to make purchases.

  • How long does apple hold ipod for

    ok... i sent in my ipod away in the empty box yesterday, its not a specialized one and how long will apple take to ship it back, and also if its gonna be the same color... or if its new or refurbished

    The length of time Apple takes to return it to you will depend on what's wrong with it, and how busy they are. Wherever possible they will replace your iPod with one of the same colour, and as the mini is no longer manufactured, it's likely to be a refurbished iPod.

  • How long does apple hold your ipod?

    just shipped mine off today, how long does it usually take if its just a replacement nano?

    well it depends, how close you r, when they get it. ect.
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • How long MUST the initial charge b

    i've read 4 hours, 2 hours, 6 hours, etc. the start-up guide says 3 hours. some suspect 3 hours is insufficient and may have caused their system lock-u
    ps.
    i may be able to diagnose the problems that ail my zen micro by retracing all my ste
    ps.
    a short initial charge may be the culprit. what clues or hints are there that would indicate a undercharge would be the cause ?

    thanks for the help. the answers have varied and i was not sure if all the deviations were a result of the technical issues associated with this product. people are rightfully worried (and over-worried) that a player costing upwards of two hundred dollars may need extra attention, esp. if its sensiti've and moody.
    i thought i may have undercharged it. the whole system locked, down to the power button. rotating the batteries didn't help either. i tried for a refund but newegg will only do an exchange/repair. rats ! i am going to have to tought this out.

  • How long does TM hold backups?

    I have a 1TB HD I am using as my TM back up disk. It currently has 429GB available.
    When I go into Restore it only lets me restore from about 1.5 months ago, yet when I look on the hard disk I can see the earliest date is in April, how can I get TM to restore files from this date?
    I also thought TM was a safe place to store files but have noticed that it is deleting older dates, will it just delete everything past a certain date even though there is plenty of space on the HD?

    Hello neil:
    TM makes hourly backups "today," saves all of yesterday's, before that they are daily for the current month, and before that weekly. TM will automatically delete the oldest files when it runs out of space.
    I do not understand the 1.5 month issue you posted. That is not, as far as I know, normal.
    Is your external HD used only for TM backups?
    Barry

  • How long must i wait to use my phone ???

    I BOUGHT MY MOBILE FOR A WEEK AGO AND SINCE THEN ITS BEEN A PROBLEM WITH THE NETWORK. CAN NOT CALL OR SEND SMS TO ANYBODY.
    I can not receive calls or SMS....
    IT CANT BE LIKE THIS WITH THE NEW IPHONE 4S !!!!!! ITS A ******* BIG PROBLEM !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Contact your cellular provider.
    Stedman

  • How long must I wait on Apple to deliver iTunes Match results?

    I have tried three times the following:
         I have started iTunes Match and it runs and then after about two hours stops and I get "Waiting for Apple to deliver your iTunes Match results...". The first time I waited about 6 hours. The second time was over night - about 10 hours. Now I have waited 3 days and it still is waiting!!! I renewed iTunes Match a month ago. Since iTunes 12 Match has been working for sh*t! Now I am angry having just paid for something that again is not working!!! PLEASE Apple help!

    Hi!
    It all depends on the amount of songs that you are trying to upload and your internet speed!
    When I first signed up for iTunes Match it had over 600 songs to upload which took about 6 hours.
    Make sure you are on the latest version iTunes also.
    If that does work just completely turn disable iTunes Match by clicking Store > Turn Off iTunes Match > Turn On iTunes Match
    iTunesMatch has been very buggylately whichis Apple's fault.
    Hope this works!
    Michael

  • Disk Mode? How long pressing the select and play buttons?

    Please, I`ve tried everything to turn it on my ipod since i drop it. It doesn`t appear in itunes or desktop, or my computer. It was with that exclamation mark. I was trying to turn to Disk mode, but it doesn`t go!! For how long should i hold the select and play buttons? I was holding for about 5 minutes until i gave up. Does it take that long?
    Thanks, Juliana

    How to put your iPod into disk mode:
    1) First, make sure that your iPod is mostly charged.
    2) Toggle the "hold" switch on/off a few times.
    3) Hold the "menu" and "select" (center) buttons down together for 7 seconds.
    4) As soon as the Apple logo appears on the screen, let off the menu and center buttons, and immediately click the "select" (center) and "play/pause" buttons until the "disk mode" screen appears.
    If that didn't work, your iPod might be broken.
    But before you presume that, try those four steps above several more times. Sometimes you need to do this step several times before you get the hang of it.
    I hope this helps!
    ~~Kylene

  • HT4061 ????  How do I power up my iPad?  My iPad won't power up. It just stays a black screen.  Tried the start up button, the home button, pressing them down and holding.

    ????  How do I power up my iPad?  My iPad won't power up. It just stays a black screen.  Tried the start up button, the home button, pressing them down and holding.

    Could be the battery is completely drained. Use the charger that came with the iPad and plug that into a known good wall outlet. Let it charge for at least an hour. Then, while it is still plugged in reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    If the device restarts let it remain on the charger until the battery indicates 100%. If it still will not turn on Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Maybe you are looking for

  • Annoucement: New Menu Wizard for Captivate

    I'd like to announce our latest product release - the Menu Wizard for Adobe Captivate The Menu Wizard is a 3rd-party software product that integrates directly into published Adobe Captivate movies. The Menu Wizard is a Flash movie that provides a dyn

  • How to get extra information in server response "250 OK extra info here "

    Hello all, I am using javamail to send e-mail messages via an SMTP server that responds in the following way when I finish sending my DATA: 250 OK <extra information here> How can I get the <extra information here> text using javamail? I am using jav

  • Active Vendors list

    Hi all , How to get Active Vendors list complete vendor i m got from table  :LFA1 , but need to kow active vendor thanks babu

  • Hiding FPM "Close" button in Portal/NWBC

    Hello, First some background, when you launch a WDA FPM application in the portal on of the standard buttons that it shows is the "Close" button. This button allows for the closing of the current browser window, When the FPM application is displayed

  • IPM help needed

    Hi, We are planning to go for IPM implementation and would like to have suggestions / answers asap. I would appreciate if someone can come up with the clarification. - Can we buy license for IPM as a standalone pacakge?OR we have to go for CRM too, s