Power button not working on iPod Nano 6G. Can this be fixed?

The power button on my nano seems to be stuck. Can this be fixed?

It was bought in april, it was an ex-display came with the one year warrenty but we don't know where the receipt is. Can't it be taken to the apple store without one?

Similar Messages

Power button not working

iPopd touch 4th generation sleep/power button not working.
Any ideas? how long is warranty?

The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
Apple - Support - Check Your Service and Support Coverage
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Power button not working with 7.1 update

Power button not working with 7.1 update

I take it your phone was still under warranty then?!
Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
I seriously think Android is calling me...

HT1688 Power button not working

Power button not working on iPhone 5

This is a defect on iPhone 5 power button that wears out in about 13-14 months of usage just after you go out of warranty. Apple is aware of this issue but chooses not to accept this as a defect. I asked the Genius bar guy and they told me this is a common case recently and costs $269 to replace your phone. There is no repair option. I am very mad and believe Apple needs to take action or will lose their customers. All iPhone 5 owners that I know started having this problem in the month of 13 -14.
I believe if the numbers go high, Apple may start a recall program. Please encourage anyone with this problem to post here. $700 phone should not wear out this soon. Apparently the part is defective on almost all iPhone 5 devices.
Other threads about this:
https://discussions.apple.com/message/23797113#23797113
https://discussions.apple.com/message/23258974#23258974

Burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems? Do I need to just buy a new one?

burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems? Do I need to just buy a new one? I remember with a PC being able to defrag.

You could buy an external dvd/cd drive.
Suggest other world computing.
You need to delete some files. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
This will save you a gig of space.
Monolingual is a program for removing unnecessary language resources from Mac OS X,in order to reclaim several hundred megabytes of disk space. It requires at least Mac OS X 10.3.9 (Panther) and also works on Mac OS X 10.4 (Tiger). It worked for me on 10.4
http://monolingual.sourceforge.net/
A detailed write-up on how to use Monolingual:
http://www.jklstudios.com/misc/monolingual.html
(3)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(4)
Buy an external firewire harddrive.
(5)
Buy a flash card.

IPod touch 5th gen. Home button stuck and power button not working! Please help!

I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Track or menu buttons not working on ipod 8gb nano

I tried to reset, but the menu & track buttons are frozen on my ipod nano. Can't scroll or select music. How do I fix this problem?

First, make sure the Hold swtich is not in the ON position.
If it is recognized by iTunes, you can try doing a Restore. The Restore button is iPod's Summary screen in iTunes. This will erase the iPod, reinstall its software, and set it to default settings. If this problem is caused by a software issue on the iPod, it should be fixed with a Restore.
If a Restore does not fix the problem, it is likely to be a hardware problem on the iPod, such as a faulty click wheel.

Power button not working on iPhone 4s then starts to work

Power button stopped working for a while then started working again. Has not happened before...

OK, thanks for sharing.

Power Button not working on my Zen Mi

Hi, recently bought a Zen Micro 6GB off Ebay, was brand new, not second hand, unit was fine for month or two until now, the power button isnt working at all. So the only way i can turn the unit on is to plug it into my USB port or to use my charger.
Any ideas why it might not be working?
Ive reloaded the latest firmware/bought a new battery/formatted the player (firmware upgrade wiped player) but nothing seems to fix it. Ive not dropped it at all, the problem occured when the player had just been left on a table, no-one had touched it for a day or two and it just decided it didnt wanna work anymore.
I can still use the player but i have to constantly leave it on incase im somewhere without access to a USB port or charger.
Oh yeah and because the power button doesnt work i cant get into the recovery mode (as u know you have to hold the power button on)
So....any ideas whats wrong?
And will i be able to get a replacement from creative...although i bought it off ebay? I know i wont be able to get a refund or anythin off the ebayer coz its not really their problem.
ThanksMessage Edited by matt83 on 07-07-2006 03:20 AM

OK, thanks for sharing.

Power button not working consistently

Have owned my Macbook Air 13" for almost a year. Over the last few months, I've had some issues with the power button when in standby mode. I think this happened even before I updated to OS X Yosemite. Sometimes when I go to turn my computer on, the button is completely unresponsive. I have to press the button over and over again. Sometimes I hold it down firmly and it turns on, other times it seems to turn on after a light touch. Any suggestions as to what I'm doing wrong? Thanks-

LauraTX1 wrote:
The power button on my Tungsten E2 not working consistently. What do I need to do to it? Hard to turn my palm on when the button does not work properly.
Post relates to: Tungsten E2
Just an FYI Laura - you can press any of the hard buttons on your Palm and it will turn on. Many of try to avoid using the fragile power button, choosing instead to use a hard button to turn on, and the normal timeout to turn off.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Power button not working headphones not being detected

have a sony xperia z tablet, power button has stopped working and the headset is not being detected by the headphone jack,
really annoying i ahve tried resetting and that didnt fix the problem, i tried restorign but cant because the power button doesnt work to shut it down!
only a couple of months old - need sony to fix the problem, i use it for work and i need it working 100%! please respond sony - dont depend on other users to fix your issues also you have shut down most of your stores in ireland which does not help matters.

Hi johnboyire,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
With the information supplied, unfortunately if you have performed a software reset and repair on the device then this may be related to hardware, I can only suggest that you contact Sony Mobile within your region and advise them accordingly.
They will be able to help. Please use the link below to find there contact details.
http://www.sonymobile.com/global-en/support/contact-us/
I apologize for any inconvenience this may cause.
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Power button not working - officejet pro 8600 +

Hi,
I just find this problem today (after 1 year of using my officejet pro 8600+) but maybe, it's normal ....
When the control panel is opened, the light on the power button is off and the power button stops working (not possible tu turn the printer on or off) but when the control panel is closed, the power button works as expected !! is this normal ?? I just find this issue today.
Thanks for any answer,
sincerly,
Domi.

Could you provide a few more details? Do you mean the control panel on your computer? How is the printer connected - Wireless LAN, LAN or USB?
I have never noticed this with mine, but I usually leave the printer on all the time and let the power saving put it to sleep automatically when not in use.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP DM3 - 3000 Power Button not working, Laptop turns on itself while connecting power cable

I disassembled my laptop for cleaning, reassembled. Now there is a problem with power button. I thought i connected the cable loosely but i rechecked it again. cable looks fine as well. When i press the button, LED doesnt glow up.
This is the board
HP Pavilion dm3-3000 Genuine "Beckham" Power Button Board with Ribbon 48.4KD05.011
can it be tested or repaired ? or the problem lies in something else ??? the laptop turns on without pushing the power button , when i connect the power cord from the mains, with battery it does not turn on but after it is turned on, it works with the battery too, when i remove the power cord.
PLEASE HELP

Seems like the operating system is not loading , Can you try accessing Bios Settings and see if the HDD is still detected ?? try accessing safe mode as well .
(Everyone was new at one point)
You wanna say thanks ?? click the white star on the right side >>>

Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

Hi,
Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

Read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

Ipad 1 power button not working

I dropped some water on my ipad 1 and it was working fine, except that hte power button stopped working. I let it sit there, and dry off, but to no avail. Then I drained the battery but every 30 seconds the symbol where it shows the dead batter blinking shows up without me even pressing anything. So i think that the power button is jammed, but it looks normal.

Take it into your local Apple Retail Store and have a Genius fix it for you. I recommend scheduling an appointment to the Genius bar so you can avoid wait times. Search your local Apple Store in the search bar on the Apple website, and schedule an appointment.
HuskieN

Power button not working on iPod Nano 6G. Can this be fixed?

Similar Messages

Maybe you are looking for