Power Button Sleep Function

Hi everyone
In the last couple of days I cannot sleep the computer by pressing the power button on the back of the unit - when I do this there is no response. However it will sleep as normal using the Apple Menu.
This is on an iMac G5 20", PPC Rev B with 10.4.6.
Has anybody else experienced this and/or have any ideas?
Thanks in advance for your help!

Hi moog5 - my iMac has an option to use power button to sleep machine, you can find it in System Preferences > Engergy Saver > Options , make sure yours is turned on / chekced. The only other thing I can think of is RESET SMU, go to this link, good info etc... Good luck, Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - HP Pav and Toshiba Sat   Mac OS X (10.4.6)  

Similar Messages

  • Windows 7 on iMac - Power Button Sleep

    My friend has Windows 7 running under Boot Camp on her iMac. She'd like it so that, when she presses the power button on the back of the iMac, Windows 7 goes to Sleep rather than Shutting Down. How can she make this happen?
    Message was edited by: Reuben Feffer

    Hi Reuben,
    maybe this http://malektips.com/windows-7-power-sleep-button-action.html can help you/her.
    Regards
    Stefan

  • Power button not functioning well

     van any one give solution tothis problem.  my laptop show blank screen although led lights are on in batery. with external power also fisrt pres same thning happen but upon hard reset and putting on again it starts normally. waht is the problem and solution to this problem. nay on please help me

    Amazing how people areover reacting... think guys for god sake! Why do you think the button doesnt click? yeah right!!! because there is rubber under it! Why? to make the device waterproof.
    Offcourse it doesnt make the sound or give the same feedback a button gives on a not waterproof smartphone. 
    One advise if you really hate it. and i do too because it feals like the button will stop working any minute. you enable the double tap function on the screen to wake the device. If you install Lock screen by Go launcher EX you can put a button on the homescreen to shutdown the screen. This way you wil never have to press the power button except when you need to reboot or power down the device.

  • Power button sleep/wake

    So I used to tap the power button and it would put my Encore mini to sleep.  Lately though, whenever i hit the button I get the drop down that says SLIDE DOWN TO POWER OFF.  Even going into the power options and setting the power button to do nothing still brings up the power off screen.  I've power cycled the tablet but the issue remains. 
    I run Folding@Home as this thing really doesn't do much else but nothing has changed on the client since i installed it more than 3 months ago (no new client has been released).  The only other app that gets any real use is Xbox Smartglass.

    You might want to try using Windows+X  to open the menu in the lower-left, selecting "Power Options," choosing "Change plan settings" next to your currently selected plan, and then resetting the plan to defaults. I don't know that that'll fix it, but it might be worth trying.
    If that doesn't fix it, could you check the full part number of your Encore?
    - Peter

  • IPhone 5 power button /Sleep button / top right button not working

    Does anyone have this issue when you press it, it is unresponsive. I have to press it like 10 times.
    I press on the left side... it works? It is so annoying... can I take my phone to apple??
    Is anybody else having problems with the iPhone 5 power button?

    hi even i have the same problem can u pls let me know what happened after u gave for Service

  • Power button not functioning

    My power button doesn't respond whenever I click it. Instead, the volume up button does so.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Are there not any reaction at all if you press and/or hold the ON/OFF button down? If not, it sounds more related to a hardware problem that a technician at an authorized service center needs to examine and fix.
    Thereby, I suggest that you visit nearest service center to have the phone examined by a technician. You can contact your local support team for further information about nearest service center and/or how to proceed with this in the best possible way:
    http://www.sonymobile.com/global-en/support/contact-us/contact-info/
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Bbz10 power button not function

    I own bbz10 nearly 2 months now, but since last week power button started not responsed, I tried to restore about 3 times already, same things keep occured. Need solution desperately. Thx

    If you tried to restore your phone, and by that I assume you mean either battery pulls and/or factory reset, and it still doesn't work, it sounds like a hardware issue for which you would have to talk to T-Mobile.  We can only advise on software issues here, we can't fix anything related to hardware.
    I hope that helps you.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Cinema Display Power Button Not Functional

    The power button on my cinema display does nothing when pressed. The other button on the display (display preferences button) does work as expected. I have confirmed that the 'Disable power button' is not selected in the display settings panel.
    The button glows brighter when I press it, but nothing else happens.
    I would like to be able to start up and shut down my computer with this button since my bluetooth keyboard cannot do it, and I keep my laptop shut when it is connected to the external display.
    I was just given this display, so I do not know if has ever worked.
    Any ideas?

    Hi Ron,
    Possibly a daft question but do have either of the Cinema Display's USB or firewire cables plugged into your G4 as well as the DVI connection? This may sound obvious but I couldn't get the buttons on my 20" ACD to work until I plugged the USB connection into my Macbook.

  • I pushed the power button and now the screen won't light up and the keyboard lights a on

    Have have purchased a MacBook Air 13" and as I went to go turn the volume up, I pushed the power button instead, now the display is black and the keyboard lights are still on! I don't no what to do plez help

    In OS X Mavericks behavior of the power button changed.
    Power button /sleep function
    http://support.apple.com/kb/HT5869
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Best.

  • "Allow power button to put the computer to sleep" setting is not available but button does it anyway

    This has never happened before. Computer stayed at gray screen with no progress wheel so I held the power button to shut it down. Since startup afterwards the power button sleeps the computer. There's no "allow power button to put the computer to sleep" choice available in Energy Saver but button does it anyway. Is there a defaults command that will fix it? Something else?

    I've had Mavericks for a week and a half. I don't believe yesterday could have been the first time I used the power button in an attempt to get the Restart Sleep Cancel Shut Down box, but I've been around long enough to know that memory will fool you.
    Yours 'til it doesn't,
    llee

  • Iphone 4 makes calls but screen is black and the power button doesnt work. never synced to computer or photo stream. I dont want to lose my photos

    So, my Iphone 4 now has a black screen. Before it did this I unlocked the screen (which has a passcode) try to open instagram and the screen flashed and went black. I can make calls and it seems to send messages but I dont know for sure because the screen is black. The power button (sleep) does not work and when I try to reset the phone it makes a call. I never synced it to a computer or Itunes and I didnt start photo stream. I want to preserve the pictures because it has photos of family members that have passed. Is there a way to get the photos?? Help please!

    If you have attempted the reset, which is holding the home button and sleep/wake button, was it still connected to the computer? Have you tried to do that when not connected. You stated it never came on, how long did you hold the buttons together? If you cannot get it to connect to iTunes then you would not be able to restore the device. You can see if you can put the device into Recovery Mode by following the instructions in this support document. If that does not work, then you are correct, make an appointment at the Apple Store. If you can't update or restore your iOS device

  • How do I turn off the Power button Lockout on my HPw1858 monitor?

    How do I turn off the Power button lockout on my HPw1858 monitor?
    This question was solved.
    View Solution.

    Hi,
    Power Button Lockout is displayed.
    The monitor's Power Button Lockout function is enabled.
    Press and hold the Power button for 10 seconds to unlock the Power button function.
    If the above doesn't work then try a monitor reset.  Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

    Hi,
    Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

    Read here:
    https://ssl.apple.com/support/iphone5-sleepwakebutton/

  • Help!, Ipad mini wont turn on even pressing both the home+power button

    iPad wont turn on anymore even i press the home + power button (sleep/wake), nor even if i plug it with the orig. usb to the pc and to the charger! It doesnt respond to anything!. To simplify my problem,  heres what i have done:
    * I let it plug into the wall charger (original)OVERNIGHT,  - nothing happens
    * I plug it into the PC connect with iTunes (latest), - nothing happens, iTunes did not detect the iPad mini
    * i press the home + power button for more than 10 minutes - nothing happens
    * i have tried the dfu mode and nothing happens
    Before this happened, the battery was at 43% then we tried to update it with IOS8 (so it was 2 weeks ago), since it alerted me that the battery will not suffice for the update process i cancelled the update ( the status was at "preparing update"). Then i put the iPad into the table.
    The next morning this iPad is dead until now!!

    Hi boks.f,
    Thank you for using Apple Support Communities.
    You have done great troubleshooting already for this issue where your iPad is not powering on.  All that's left now is to seek service for your iPad.
    iPad Repair - Battery & Power
    Take care,
    Alex H.

  • IPhone 5 power button unresponsive, no longer under warranty.

    My iPhone 5 started losing responsiveness in the power button (sleep/wake button) about 6 months into owning it. I put off taking it to the Apple Store, as the closest Apple Store is 4 hours away. Now, after my warranty has expired, I have an unresponsive power (sleep/wake) button, and I don't know where to go from here. Is it possible to get it replaced for free as before? Or must I pay?
    Also, can I manually fix it? I have taken apart all other itterations of the iPhone, and replaced parts. If I can fix it manually, what must I replace?
    Any help would be appreciated.
    Thanks!
    - Mason -

    if you diy that device apple will not touch it...if the device is oow they will not replace it for free..you must pay oow which is $249. and once again if you have altered that device in ANY kind of way it is no longer apples problem

Maybe you are looking for

  • Toshiba A105 BIOS Recovery Process Questions

    Hi! Ive got a Toshiba Laptop A105-S4284, Model #: PSAA8U-0FH02K that froze while trying to flash the BIOS. Now, when I try to boot it up, it gets stuck in the same place it did during the flashing; on the Toshiba splash screen with the status bar at

  • Creating a bootable G5 backup on external drive

    Can anyone help point me to instructions for creating a bootable backup for a G5 quad v.Tiger_10.4.11 using a LaCie d2 Quadra 500GB external with Firewire 800. I'll also be using this external drive to backup my files/apps daily. Thanks for your help

  • Installed but icon doesn't work

    When I click on the smart web printing icon it tells me I have to update.  A message comes back that version 6.4 is already installed.  But the Icon doesn't work and takes me back to installing again.  Photosmart c410 Windows Vista Dell

  • Best way to get and pass filename from a DB Table to SQL Loader?

    What is the best way to get the data filename from an Oracle Table to pass it to SQL Loader?

  • Crystal Report - Help!

    I am looking at the existing report. At the Database expert, under the selected tables, I have "C:\temp\example.ttx" and after i branch it out, i saw example under the example.ttx however i have search everywhere but i couldn't find example.ttx. so w