POWER BUTTON WILL NOT WORK
phone stays on all the time, cannot shut off using power button
http://support.apple.com/kb/TS3281
This may help
Similar Messages
-
please if anybody can help me i would give you a very very big hug but :i will sat to yiu I thamk yiu very much to take your time to help me yes
Muitos Beijos and Obrigado
IssyFirst begin by resetting the SMC (system management controller) on your macbook as shown here: http://support.apple.com/kb/HT3964
Have you recently changed any hardware ? May there have been any condensation that found it's way on the greater area of the keyboard and specifically near the power button ? Have you tried pressing the area directly near the said button and then pressing the power button itself simultaneously with the possibility the contact may have gone haywire ?
Good luck. -
Is this a serious problem? What may have caused it? Help!!
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Froze on black screen and power button does not work
my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
any suggestions would be appreciated- iOS: Not responding or does not turn on
Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipad has a black screen and the power button is not working. Help!
This is the second time my ipad screen has gone black. The power button is not working. I reset the ipad about two weeks ago when this happened. However, this time I am not able to get itunes to recognize the device. It keeps asking to respond from the ipad (obviously with a black screen that isn't going to happen). Im not sure what to try next...thoughts?
Have you tried to give it a reset?
Reset
Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost. -
My iphone power button is not working. What can I do?
Hello, I bought an iphone 5 last year and it still in warranty . It has some regular scratches for the use but it never felt down.
The power button is not working now and I sent to an apple retailer here in Brazil (SOMA - Revenda APPLE Solution Expert e Assis. Tecnica Autorizada) to fix it. They refuse to do it saying that the button is not working because of the scratches what I believe is not true. And the retailler suggest to me to buy a new one.
And more, I receive the iphone with the factory configuration and I don’t know why.
I would know what can I do to fix the iphone. And How can I use the warranty here in Brazil.
I couldn't find an e-mail from apple.com support to report this.
I will stay in US next december. I can fix my phone in an Apple Store?
I'm very dissapointed with the technical assistance here in Brazil.
Thank YouMeaning that you cannot restart or reset the phone? If you haven't tried already, try both options.
Otherwise, you can do a backup & restore, or even a restore as new (only after a successful backup).
If the issue persists, then look at a replacement. Either it will be a hardware defect (free if within warranty), or physical damage ($49 with AppleCare Plus, $149 without it.) -
I am having MacBook Pro 3 yrs old and today while I was watching some movie on it suddenly it got power off and when I am trying to start it, it's power button is not working even the round button on external left side is not showing battery lights. But when I connect it to chrger then Charger only gives green light and even the external round button only shown 4 green lights (if charger connected). I don't know what to do now
Sounds like you need a #1SMC Reset
1. SMC reset
>>Instructions to reset SMC
Disconnect other non-Apple and external hardware except (if applicable) a mouse and keyboard until your finished repairing your machine.
Problems solved: Fans blowing with no activity, machine is not booting, power button pressed and nothing happens, problems with indicators, Magsafe has wrong lights, battery is not charging, monitor and graphics issues etc. If the battery is not charged (from like letting it sleep too long), let the Mac charge up awhile afterwards.
Will not hurt the machine resetting if it's not broken.
Other related hardware problems (optional):
Check battery status: Hold option/alt key down while clicking on the battery icon in the menu bar, top right corner.
Magsafe: Use the correct/matching power supply charger with your Mac, not a less powered one from another Mac.
Apple: Laptop won't power up Apple: Computer won't power up Troubleshooting optical drive
Magsafe problems Magsafe problems more -
my power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like i usually does but it's not turning on
Hold down on the home button simultaenously holding on the sleep wake button (power button) hold it for more than 15 seconds this will then shut down the device.
If the device is already shut off do this same sequence to see if you get an apple logo. If you get the logo allow the device to login. Write back if this does not resolve your issue.
Good luck Friend. -
Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You
Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
Printer Power button in not working,no light indication
Hi,
HP Deskjet F2400 Series
My Printer Power light is not working, and Indicator lights are also not blinking. but Scanner is working fine. Also an error message showing "Cover is open".but the cover is closed properly. There is a problem with printer.
kindly, provide the solution.
Thanks,Hi RamyaVemuri,
Welcome to the HP Forums!
I see that your printer power button is not working, and that their is no light indicators.
I think this guide should help. 'The Cover is Open' Message Displays on the Computer.
If that doesn't work, please respond with the type of printer you have as their are multiple Deskjet F2400s. Finding Your HP Product Model Number.
Hope this helps, thank you for posting.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Power button will not go in or out
I have received in April a Nano generation 6 under Apples product replacement. This replaced my great working generation 1. The power button will not go in or out. Tried to go to Apple support and put serial number in. It states out of warranty. I had it in a box since April. I should have tried it. I think these were used or refurbished by Apple. It came in a white, non apple labeled box. I don't know how to get help from Apple. I want my generation 1 IPod back... Any ideas welcomed. Thank you.
this is not working, ever since i have new OS also noticed the on friends mac before... the solution u recomended is NOT working for me. before i usualy clicked cotrol or cmd and then pinchout with two figers and zoom worked i want it the same way..
-
my iphone warranty just ended a week ago but I need to get it fixed because my power button is not working, do I still have to pay for it to be fixed even though my warranty ended a week ago?
Your warranty expired, so of course you will have to pay.
-
My iphone 4 power button does not work can i take it into apple store and replace it or what are some options
Assuming it is out of warranty Apple Genius bar will exchange for an out-of -warranty replacement unit identical to the to donor
In US $149 for in iPhone 4 -
My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?
- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.
Have you attempted a restore?
Maybe you are looking for
-
Pl/sql block updating orderId, itemID
lol here i am again! This time its like this: i have a table (orderId, itemId, CustomerId, productId, quantity, start_date, end_date, oldRef) here are some of the values: 2477, 1, 201, 111, 1,19-MAR-93,14-APR-93 2477,2,201,112,1,19-MAR-93,14-APR-93 2
-
2-tier form/server implementation
Hi all, Where can I find information to implement 2-tier (client/server) with Developer 6i? Is it possible to do it without installing form/report server? Thanks in advance! null
-
After Effects CS5 colapsa cuando trato de usar la herramienta de gotero
Recientemente actualicé mi MAC al OS X YOSEMITE. Y ahora cuando uso el gotero en After Effects CS5 se me cierra y sala la siguiente alarma Last log message was: <4438582016> <DynamicLink> <5> /Library/Application Support/Adobe/Common/dynamiclink/CS5/
-
Hi, i've recently shot a stop motion movie. I have transferred the pictures into Iphoto, and opened them up in Imovie, but when i try to add them with a 0:03 frame rate via the photo settings, it does nothing! HELP!
-
Is there a way to copy the workspaces, keyboard shortcuts, etc. form my CS6 apps to the CC apps?