Power cable for Mac Pro

My friend has asked me to look at his Mac Pro which when he last used it had had its psu replaced. Since then it has been put aside and I've brought it home. It has no power cable. Where can I get one? I'm in Perth 6149 WA.

If what you are saying is accurate, you have a power supply that is truly bizarre. The entire world has standardized on the C13 and C14 connectors shown in this Wikipedia article. I do not know how you could even buy a power supply with a different connector.
http://en.wikipedia.org/wiki/IEC_connector

Similar Messages

  • Cables for Mac Pro (Late 2013)

    I am in transition from Mac Pro 2010 to Mac Pro 2013. Now I'm planning what kind of cables I'm going to need and where to buy them. I've got 2 Epson printers, USB keyboard, 2 30" Cinemas, USB EyeTV adapter, FireWire camera and perhaps two other USB and FW devices which I can't think of right now.
    I'm planning to buy 2 expensive Apple Mini Display Port to Dual Link DVI Adapters, Thunderbolt or USB to USB Daisy chain adapter, Thunderbolt to FW adapters. I have no USB 3 devices. Also, perhaps, I need several Thunderbolt, USB and FW cable extensions.
    I would like to have your opinions and recommendations.

    there are a number of TB Docking stations for you on www.macsales.com

  • Power conditioner for mac pro

    i have a mac pro that i use primitively for audio purposes. in my rack i have the Furman M-8x POWER CONDITIONER http://www.furmansound.com/product.php?div=01&id=M-8x i am not an expert on this. but is it ok if i power my mac pro from here? please let me know.

    i have 2 of these conditioners, one is dedicated to all the synths and medium size mixer.
    the second has the following devices:
    *Mac Pro:* Â Voltage ranges: 100–240 V alternating current (AC) Â Current: Maximum of 12 A (low voltage range) or 6 A (high voltage range) Â Frequency: 50–60 Hz
    _with: 4x hard drives + firewire bus powered audio interface + usb powered Midi controller keyboard + i pod occasionally_
    *20" apple display* : 65Watt(W),modelA1096(20-inchdisplay) • Input:100-240volts(V)alternatingcurrent(AC),50-60hertz(Hz) • Output: 24.5 V ̄ 2.65 amperes (A) maximum
    *2x KRK rockit 5 1st gen:* 1A 500mA (x2 bc there are 2 speakers)
    *behringer XENYX 1002:* 16 W 120 V~, 60 Hz (1A)
    i don't plan on adding anything else.
    Message was edited by: iJny9956

  • I am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the

    i am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the complete power unit...it seems odd that you have to buy the whole unit again...thanks.matthew

    All you need is a plug adaptor, if required. Apple sells an adapter kit:
    http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

  • ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

    I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
    I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

    A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
    from: http://en.wikipedia.org/wiki/HDMI
    You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

  • Why can not you thought of improving the design of power adapters for mac book pro from damage so easily?

    why can not you thought of improving the design of power adapters for mac book pro from damage so easily?

    I congratulate you. you are very lucky because I hurt my less than two years taking all possible care. and have found that this has happened to many people more

  • Universal power pack for Mac air, Mac pro and ipad

    Have an 10 hour flight comming up    Would like to purchase universal power pack for Mac air Mac pro and ipad

    I do not take Intergrative Nutrition, but I have some advice for choosing your device.  Your choice of device should be based upon what you will use your device for currently and in the future.
         If you are just using your device to use the internet and do light activities (smal typing, etc.) then the MacBook Air is a better choice.  You should note that the Air has no Superdrive(for your DVD's CD's etc.) so you will have to put out more money to get one.  It can also be slow because of the Flash Memory.
         If you are going to be doing more "heavy" computing (photo editing, sound editing, lots of multitasking, large file sizes etc) then I would suggest getting the MacBook Pro. 
         If you prefer tablets, or tablet style reading then the iPad will be better for you.  You should keep in mind that ther are restrictions on the files that you can view or work with on the iPad.
    Overall, I prefer the MacBook Pro because of its versatility, durability and capabilities to do multiple file types.  If you have any more questions, feel free to drop by your local Apple Store or Apple Authorize Retailer.  They will be happy to help you!

  • Need power cable for airport extreme

    need power cable for airport extreme

    http://www.mac-pro.com/Airport-Extreme-Base-Station-Power-Adapter
    Just one of many if you enter AirPort Extreme Power Adapter in a Google search.

  • HD 7970 video card for Mac Pro 2009

    I just wanna buy one HD 7970 3GB for my 2009 MAC PRO. Do you guys flash the card or does 10.9.2 natively support HD 7970 diver? I've been looked at some HD 7970 cards on ebay, just confused with the power  cables, some has one 6 to 6 pin and 6 to 8 pin cables. Others has two 6 to 6 pin cables. I don't know which one to buy is safe.
    Here is the link:
    http://www.ebay.com.au/itm/141058814...84.m1438.l2649
    http://www.ebay.com.au/itm/231169142...84.m1438.l2649

    yes-i agree with what kaz-k has written.  As long as you get the correct power cables for your graphics card you should be okay. I think the Mac Pro has 2 6pin sockets. We don't flash the card ( thought I'm assuming it could be done elsewhere) , and Apple doesn't support  anything other than a few graphics cards anyways, and it doesn't really read what's been posted here. here's the takeway: The card will probably work, however, due to the lack of a Mac EFI (basically a boot rom), you won't see a startup screen should you choose to install the card into your mac pro 2009.  As the OS gets going you will see graphics. Should you need to do basic troubleshooting, eg choosing which drive to start up from
    (command R on startup, I believe), the lack of a boot screen could be troublesome. If you don't care about that, by all means go ahead. 10.9.2 should have support for this card.  If it helps, I bought a Sapphire 7950 for my Mac Pro 2008 (3,1) and although it doesn't run at quite full speed, it was a breeze to install, and it beat the 8800GT which was in that slot
    good luck
    John B

  • When I power up my Mac-Pro I only get  a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

    When I power up my Mac-Pro I only get  a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

    Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • "fire wire" video capture cards for mac pro

    ....Have Power Mac ver. 10.9.5 system Maverick w/ 4 MB RAM & am trying to locate hardware for:
    acquiring "FIRE WIRE" video capture cards for mac pro.... ? Any suggestions....?(Just purchased Adobe CS 5 premium)

    Your question doesn't make much sense.
    What type of Mac Pro do you have? Is it the new black cylinder or the old style silver tower?
    Firewire is built-in to the old models & the new Mac Pros can use Thunderbolt to Firewire converters to capture from Firewire sources.
    Maybe like this http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
    Many older cameras used Firewire for capturing, but that has been replaced by other connection types. What are you trying to capture from?

  • Is AirPlay Mirroring available for Mac pro?

    Is AirPlay Mirroring available for Mac pro?
    Need to share my MAC screen with apple TV display and eliminate the cable.

    It's a glaring omission in my view, but Apple's focus seems to be on phones and tablets not OS X.
    Send some feedback:
    http://www.apple.com/feedback/appletv.html

  • Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?

    Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?

    See > http://support.apple.com/kb/PH11302
    To be able to use the iMac as an external display, the Mac Pro should come with a Mini DisplayPort or Thunderbolt port, so think that it will include Mini DisplayPort or Thunderbolt, although we don't know anything.
    To connect the iMac to the Mac Pro, as your iMac has got a Mini DisplayPort, you have to use a Mini DisplayPort to Mini DisplayPort cable (Thunderbolt is compatible with Mini DisplayPort cables, but Mini DisplayPort isn't compatible with Thunderbolt cables). Then, just follow the steps of the page above to use the iMac as an external display

  • Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?

    Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
    Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2.66 GHz
      Number Of Processors:          2
      Total Number Of Cores:          4
      L2 Cache (per processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1.33 GHz
      Boot ROM Version:          MP11.005C.B08
      SMC Version (system):          1.7f10
      Hardware UUID:          00000000-0000-1000-8000-0017F2059956

    It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage. 
    WD Caviar Green
    WD Green 2TB
    For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
    WD Caviar Black 1TB 6Gb
    WD Black Caviar 2TB
    larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
    Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
    Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance.  TimeMachine sometimes makes a poor backup method with some green cases.

  • Better Graphics Card for Mac Pro !!

    Hi,
    I planning to upgrade my Mac with the latest Mac Pro .. so I'd like just to know ..
    Which is the better performance can I get it for 3D Graphics redraw .. and Open CL feature:
    A Mac Pro, have (One) NVIDIA EVGA GeForce GTX 285 1GB GDDR3 memory (Here is the Card info )
    Or Mac Pro, have (3x) NVIDIA GeForce GT 120 512MB (Here is the Card info )
    Or anyone can advice me another graphics card better than above for Mac Pro ?
    (Except the NVIDIA Quadro FX 4800)
    Thanks in Advance.

    Two choices, either ATI 4870 can be bought as BTO for $200, or buy with GT120 and add GTX 285 $449 afterwards (not offered as BTO configuration at reduced price).
    ATI seems favored by OS X and Apple applications but has to catch up in some areas, you know, like behind on OpenCL which will take time and work really (and Nvidia with CUDA, GPGPU and Physx has a leg up).
    Or, sit on pins and needles and hope ATI 5870 or GTX 480 (bit, power guzzeler).
    Apple likes to have basic card that doesn't need aux power so has to work @ 75W, and only has two 6-pin, the Fermi cards have 6 and 8-pin, unless revised models of Mac Pro have more options.
    Run Windows, the GTX shines.
    There has never been support for SLI, and recently even CFX was disabled as well.
    Photos of the 480:
    http://www.hardmac.com/news/2010/03/04/first-photos-of-the-geforce-gtx-480
    Specs:
    http://www.hardmac.com/news/2010/03/03/first-information-about-geforce-gtx-480
    And 1.5GB RAM... http://techreport.com/discussions.x/18556

Maybe you are looking for