Power compatibilty issue

I have a Lenovo 2 pro. When I visited the "action center" I found an issue about the the driver of the power management system not comatible with windows 8.1
It is asking me to go to Lenovo support page to dowload a newer driver, but when I get there I can't figure out which driver is the one.
So please can anyone paste a direct dowload link to the driver!!
Thanks.

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Similar Messages

Power on-Power off issues with X200

I am having power up and power down issues with my Lenovo X200.
Prior to the immediate problem, I would experience occasional unexpected shutdown of the computer (I would hear a relay click when it happened), and on some occasions when I put it into hibernation, then power it back up later it would not resume, instead, it would restart with a new session of Windows.
About a month ago, it shut down while I was using it. I powered it back on, but it took a long time (nearly a minute) to get the “ThinkPad” initial boot screen, then the screen would be blank for about a minute, then I would get a screen that read, “Intel Management Engine BIOS Extension v 4.0.4.0007” and also “M.E Initializing……” That screen would show for about a minute, then I got another screen reading “Security chip is generating endorsement key pair. Please wait.” That screen would show for about 5 minutes, then it would read, “Generation failed!!!” for about 5 seconds. After that, it would boot to Windows (I am using Windows 7 Professional).
When I would shut it down, either in hibernate mode or full shutdown, after the hard drive icon stopped flashing (indicating it had shut down), the power icon, battery icon would stay on, and the “sleep” icon would flash. I would have to hold the power button down to turn those icons off; if I failed to do that the power would stay on until the battery completely drained.
I read something about the “Security chip is generating endorsement key pair” message so I went into BIOS and changed the security chip from “Active” to “Inactive”. However, when I would start the computer with the chip “inactive”, it would go first to the initial boot screen, then to the “M.E. Initializing” message, then the screen would go blank and remain blank, not ever booting to Windows. So I went back to BIOS and changed the security chip to “Disabled”. With it disabled, it will boot up, but still is very slow booting and I still get that “M.E. Intializing” message for about a minute, and also I still have to hold the power button down to power down the computer after I shut it down (or hibernate) with Windows.
The good news is that, after this started happening, I have not encountered an unexpected shutdown nor has it failed to resume the previous windows session if I hibernate it.
Any suggestions? Thanks in advance for your help.

The difference may be that the G5 iMac bus (where your fire wire plugs into the back) is a powered bus. What this means is the LaCie drive will "sense" the power from the bus and not turn off. The power it gets from the fire wire bus however may (is) not be enough to actually operate it, only leave it on. You still need to the drive into a power outlet.
In the LaCie manual (CD that comes with drive) and the FAQ section of LaCie's web page it states this as well.
What I do is manually turn the drive on when needed (performing back up or for scheduled back up). The LaCie drive should be quiet when not in use as it has no fan.
PS - try SuperDuper for backups, much better (IMHO) than Silverkeeper.

Power Mac G5 DP1.8GHz - Bad Logic Board or Power Management Issue?

I have a Power Mac G5 DP1.8GHz/1.5GB/80GB which I bought non-working. It has not yet been disassembled or examined by a certified tech. This is it's issue (which replicates): the computer powers on. It makes a single warning tone, then the LED flashed at least 15 times (too fast to count). Then the posting chord is heard. Hard drive spins up. Then nothing (no video). Won’t boot from any disk. I have changed the RAM and tested the RAM banks with known-to-be-good RAM from another DP1.8GHz G5. The warning tone stopped once or twice after this switch, but then it didn’t chime. I changed the PRAM battery, but not with as new one. However, after installing the used one and then resetting the PMU, it displayed video briefly for the first time. While installed in the other 1.8GHz G5, the hard drive was formatted, given a clean install of OS X 10.4.11, and then moved into this computer where is never mounts. The computer is not accessible through TDM.
Do I have a bad logic board? Bad CPUs? A power managment issue? A RAM issue?

Through my own trial and error troubleshooting, I have found the CPUs to be in good working order and the logic board passes the Apple Service Diagnostic every time. Despite the installation of numerous pairs of modules that worked in another DP1.8GHz, the computer has a RAM issue-it gives the "no good RAM" tone most of the time when it powers up (after a PMU reset it does not). Also the computer boots from disk or into Open Firmware but the disk utility can't see either hard drive so I may have a bad SATA controller.

Hi, my product is under warranty and has a power button issue. Greek dealer doas not support it becouse I bought it from the us. wharT shall I do.Thank you

Hi, my product is under warranty and has a power button issue. Greek dealer doas not support it becouse I bought it from the us. wharT shall I do.Thank you

It can only be serviced in the country where it was originally sold. Take it back to the US or send it to someone you know there to take it in for service.

Laptop Power on Issue

Dear All, I have a critical problem with HP Probook 640 G-1 it has power on issue. When I Press Power button neither power on nor display.I Swap Processor and RAM with a good one,I have replace motherboard with new one but issue is still no resolved.I disconnect all components Optical drive, Wi-Fi card, RAM, Battery, Keyboard Wi-Fi, volume buttons. Even processor.One more thing when I connect Power adapter (Charger) Power LED blink for a second and then turned off but this blink only happen when battery not connected when battery connected even blink is not happen. Waiting for good response please do need full. Thanks and regards Muhammad Sohail

Did you try downgrading to 3.11 to see if that helps ? Looks like other people may be having similar issues - see the later posts in this thread here .
That was originally about a issue with suspends on 3.11 i386 only that was fixed in 3.12. But the last few posts seem to indicate a different issue that started with 3.12.

GS70 laptop power setting issue (it does not save my setting even with admin)

laptop is decent, but the power setting does not save when i (1) shutdown (2) go through fn + F5;power modes on msi gs70
I want to change simple power options such as:
-do nothing when close lid
-other etc in power options
will revert back to original out of box setting when i shutdown....
Its not cool that I have to change 5 power option setting so that I can leave my laptop to download while I am out of house.
what i've tried:
I changed regedit for power setting option to give me admin/allow save/apply on power settings (this is windows 8)
Tried w/o messing with regedit but didnt work before messing with regedit on admin/saves
some help would be great! Been 6 mths with this power option issue :/ already at the point to chuck it out of my 20th floor window

I had the same problem do this
http://www.raymond.cc/blog/archives/2011/03/23/enable-save-tabs-on-exit-for-firefox-4/
I do what this guy said and it is allright again

IPhone 5 Power button issues after recent update.

After this most recent update, my power button is not working as it normally does. It takes two or three attempts to turn the phone off and more than once to turn it. Sometimes it turns on and immediately turns off. This is happening only after this update.

Yes 7.1.2 I had a 7.1 backup, and no issues with that... but then I did a clean DL of 7.1.2 and once again with NO apps on the iphone power button issues... as mentioned. So it is not the apps, nor songs, nor anything else...just 7.1.2 I am now running 7.1 no issues.

Compatibilty issues oracle db's on unix /NT

could there be any compatibilty issues if we had oracle db's on unix and
wanted to port information to oracle db on NT or vice versa. What about the
data mine, could all dbs be blended in there regardless of OS they
originated from.
null

emctl start dbconsole does not start the database. It starts the dbconsole (i.e. Enterprise Manager). Starting the database is a different task.
You cannot use one dbconsole for both databases. It is designed for only one database. You can either create a second dbconsole for the second database (this will be created on a different port on the same server) or use Grid Control.

My Time Capsule has just failed, 2 months after the end of 12m warranty. same old known power supply issue, "just unlucky" says my local Apple service center. ***?

i bought a 2TB Time Capsule in Sep 2010. its just failed last week, less than 2 months after the expiry of the 12month warranty.
and 3 months after the end of Apple's offer to replace all the many Time Capsules that have failed previously due to this same fault.
nice timing guys.
"yeah, its dead. same old known power supply issue", says my local Apple service center, "just unlucky".
huh? "unlucky"? you sell products with known defects, and when it fails i'm "unlucky". nice.
"OK, anyway, how much to fix it ?", i ask.
"you can't fix them, its closed", is the reply, "you have to buy another one".
"hmpf. OK, how do I get my backed-up data off it ?"
"you can't. we could try break it open and recover the hard disk i guess, but no guarantees we'd get it, and you'd have to pay for us to do that, whether it works or not of course".
"er.... is there a hidden camera in here? are we on TV? you can't be serious ? ..and this piece of garbage is what i've been using for a secure backup of my precious, irreplaceable, priceless personal data ???"

ceeb28744. Welcome to the Apple Users Support Community. Sorry to hear your TC died! You said it was a 2TB so I would guess it be the model A1355/MB997LL/A or MC344LL/A. Believe it or not all users of these time capsules will eventually experience this problem like you have. There is a 99.5% (or better) chance that the only thing that is wrong with it is the internal power supply. If you will go to this site.... https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair and once there look over at the left side and you will find:
Apple Time Capsule Repairers and from that list you will be able to choose from a list of individuals that could repair your TC and have it returned to you fully operational again. The individuals on the list are hardware technicians and they can save you a lot of money and time.
Larry

Apple is experiencing Bluetooth compatibilty issue since they have upgraded their Bluetooth from 2.1 to 4.0.

Apple is experiencing Bluetooth compatibilty issue since they have upgraded their Bluetooth from 2.1 to 4.0. Is this the case with Ipad 4 I have a logictech keyboard and the ipad cant dicover it. Please advise

I wouldn't delete the firewall configuration as described above as you would lose all your rules that you have in place for your firewall. I do however think it could be a firewall rule issue. You could temporarily disable the firewall on the mac System Preferences > Security > Firewall to prove this without deleting all your rules by deleting that file. If this works then have a look at the rules you have in place and maybe make an exception to this set of rules.
The 169..*. address you have is known as a APIPA address and is normally the address that you will receive when the DHCP client fails to find a DHCP server so this could be either sending or receiving data to the device that is blocked. DHCP needs to DORA (Discover, Offer, Receive and then Accept), which is a two way communication.
Kind Regards

Network Card turned off and Power regression issues.

Hello,
Can any one please help me setup wifi/ethernet on my Thinkpad t420? It has Intel Wifi Link 1000 BGN. If i am not wrong it is suppose to work by default. How and what modules do i have to load to turn on my wifi card? I know how to make wpa_supplicant work.
Their are power regression issues with linux kernel. How can i make pacman to not to upgrade to latest kernel releases?
Thanks.
PS:- I have done research but couldn't come find an answer. Sorry if this question has been asked many times.

Check http://intellinuxwireless.org/?n=Downloads for intel wifi drivers
Pacman should not syncronize system wide missing packages unless specified with the -u [OPTION] on the -S [SYNC] argument, see the man pages on pacman.
http://www.archlinux.org/pacman/pacman.8.html
Also make sure you have done all the stuff on wireless setup in the beginner guide, it is very comprehensive
https://wiki.archlinux.org/index.php/Be … cessary.29

HT1430 iPhone 4S Power Button Issue

I have an iPhone4S that has fallen to the broken power button issue - is there a way to restart it without the power button? My phone is acting strange and I know if I restart it then it will be ok. I am already using the Accessibility feature to lock the screen, but cannot figure out how to restart it short of letting the battery run out.

I have the same issue.... just hold down the lock screen button on your accessibility menu until it shows you the power down option. Then plug the charger in & it will automatically turn back on.

QIP 7216 power on issue

I have a QIP 7216 settop box connected to the TV via component cables (not HDMI). Sometimes when I turn the settop on, i get audio, but the video is all black.... If i power the box off, then on again, it's fixed. If I change channels, it's fixed.... Anyone else experience this?

I don't have a 7216, I have a 6416 with component cables, and I've certainly seen the problem. the easiest fix is to just change the channel, and then change back to the original channel. I haven't seen the problem on 1.6.2, but I've only had it a few days, so that's hardly a valid test.
So I doubt it is an HDMI handshake issue. I suspect it is a firmware issue on the box. I don't doubt that unplugging and waiting 60 seconds fixes it, but that's a major PIA compared to just changing the channel, and then changing back. It is strictly a power on issue, so once it is goes away, it stays away until the box is tuned off again.
Anyway I have come to regard it is a nuisance that is low on the long list of other problems with FiOS DVR boxes.

7216 power on issue

I have a 7216 w/ 1.6.2 settop code. Sometimes when I turn the settop on in the mornings - I have audio, but no video. I have to turn the settop off then on again to get video. I am using component cables to connect to my TV, not HDMI. Anyone else notice any "funny" behavior with the 7216 when ya turn them on?

I don't have a 7216, I have a 6416 with component cables, and I've certainly seen the problem. the easiest fix is to just change the channel, and then change back to the original channel. I haven't seen the problem on 1.6.2, but I've only had it a few days, so that's hardly a valid test.
So I doubt it is an HDMI handshake issue. I suspect it is a firmware issue on the box. I don't doubt that unplugging and waiting 60 seconds fixes it, but that's a major PIA compared to just changing the channel, and then changing back. It is strictly a power on issue, so once it is goes away, it stays away until the box is tuned off again.
Anyway I have come to regard it is a nuisance that is low on the long list of other problems with FiOS DVR boxes.

No man power to issue how to map this scanario

Dear Gurus,
Pls any one provide a solution for this scanario,
Oil is received (say 50000 ton) and stored at one location. There is no man power to issue it from that location.Worker comes there with pail (bucket) and collects oil and go. Over a period, the remaining oil is measured (using dip), if oil goes below the minimum level once again PO raised.How we can map this
into SAP.Its not a pipeline material.
Regards,
AnandBalan

Hi,
Go through the following steps
1] Assume that today 5000 L of oil is received in the tank.
2] The person collect say 50 L from the tank. Now quantity 50 L is not known to the person who is resposible for stocks because there is no manpower available.
3] But as you stated before, physical stocks can be take with the help of dip.
The person will take dip and will found level 4950. So he will simply issue 50 L ( 5000-50=4950 L).
The same will be continued evereday.
But the problem is how to monitor the stocks and when to procure oil.
For this reason, maintain MRP Type VB with reorder point for example say 1500 L
Continuing the above procedure with stock will reach to the 1500 L, automatically PR will be generated.
With this PR, Procurement cycle will be continued.
Hope this will help you.

Power compatibilty issue

Similar Messages

Maybe you are looking for