Power conditioner for mac pro

i have a mac pro that i use primitively for audio purposes. in my rack i have the Furman M-8x POWER CONDITIONER http://www.furmansound.com/product.php?div=01&id=M-8x i am not an expert on this. but is it ok if i power my mac pro from here? please let me know.

i have 2 of these conditioners, one is dedicated to all the synths and medium size mixer.
the second has the following devices:
*Mac Pro:* Â Voltage ranges: 100–240 V alternating current (AC) Â Current: Maximum of 12 A (low voltage range) or 6 A (high voltage range) Â Frequency: 50–60 Hz
_with: 4x hard drives + firewire bus powered audio interface + usb powered Midi controller keyboard + i pod occasionally_
*20" apple display* : 65Watt(W),modelA1096(20-inchdisplay) • Input:100-240volts(V)alternatingcurrent(AC),50-60hertz(Hz) • Output: 24.5 V ̄ 2.65 amperes (A) maximum
*2x KRK rockit 5 1st gen:* 1A 500mA (x2 bc there are 2 speakers)
*behringer XENYX 1002:* 16 W 120 V~, 60 Hz (1A)
i don't plan on adding anything else.
Message was edited by: iJny9956

Similar Messages

  • Power cable for Mac Pro

    My friend has asked me to look at his Mac Pro which when he last used it had had its psu replaced. Since then it has been put aside and I've brought it home. It has no power cable. Where can I get one? I'm in Perth 6149 WA.

    If what you are saying is accurate, you have a power supply that is truly bizarre. The entire world has standardized on the C13 and C14 connectors shown in this Wikipedia article. I do not know how you could even buy a power supply with a different connector.
    http://en.wikipedia.org/wiki/IEC_connector

  • Why can not you thought of improving the design of power adapters for mac book pro from damage so easily?

    why can not you thought of improving the design of power adapters for mac book pro from damage so easily?

    I congratulate you. you are very lucky because I hurt my less than two years taking all possible care. and have found that this has happened to many people more

  • Universal power pack for Mac air, Mac pro and ipad

    Have an 10 hour flight comming up    Would like to purchase universal power pack for Mac air Mac pro and ipad

    I do not take Intergrative Nutrition, but I have some advice for choosing your device.  Your choice of device should be based upon what you will use your device for currently and in the future.
         If you are just using your device to use the internet and do light activities (smal typing, etc.) then the MacBook Air is a better choice.  You should note that the Air has no Superdrive(for your DVD's CD's etc.) so you will have to put out more money to get one.  It can also be slow because of the Flash Memory.
         If you are going to be doing more "heavy" computing (photo editing, sound editing, lots of multitasking, large file sizes etc) then I would suggest getting the MacBook Pro. 
         If you prefer tablets, or tablet style reading then the iPad will be better for you.  You should keep in mind that ther are restrictions on the files that you can view or work with on the iPad.
    Overall, I prefer the MacBook Pro because of its versatility, durability and capabilities to do multiple file types.  If you have any more questions, feel free to drop by your local Apple Store or Apple Authorize Retailer.  They will be happy to help you!

  • When I power up my Mac-Pro I only get  a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

    When I power up my Mac-Pro I only get  a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

    Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • "fire wire" video capture cards for mac pro

    ....Have Power Mac ver. 10.9.5 system Maverick w/ 4 MB RAM & am trying to locate hardware for:
    acquiring "FIRE WIRE" video capture cards for mac pro.... ? Any suggestions....?(Just purchased Adobe CS 5 premium)

    Your question doesn't make much sense.
    What type of Mac Pro do you have? Is it the new black cylinder or the old style silver tower?
    Firewire is built-in to the old models & the new Mac Pros can use Thunderbolt to Firewire converters to capture from Firewire sources.
    Maybe like this http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
    Many older cameras used Firewire for capturing, but that has been replaced by other connection types. What are you trying to capture from?

  • Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?

    Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
    Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2.66 GHz
      Number Of Processors:          2
      Total Number Of Cores:          4
      L2 Cache (per processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1.33 GHz
      Boot ROM Version:          MP11.005C.B08
      SMC Version (system):          1.7f10
      Hardware UUID:          00000000-0000-1000-8000-0017F2059956

    It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage. 
    WD Caviar Green
    WD Green 2TB
    For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
    WD Caviar Black 1TB 6Gb
    WD Black Caviar 2TB
    larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
    Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
    Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance.  TimeMachine sometimes makes a poor backup method with some green cases.

  • Better Graphics Card for Mac Pro !!

    Hi,
    I planning to upgrade my Mac with the latest Mac Pro .. so I'd like just to know ..
    Which is the better performance can I get it for 3D Graphics redraw .. and Open CL feature:
    A Mac Pro, have (One) NVIDIA EVGA GeForce GTX 285 1GB GDDR3 memory (Here is the Card info )
    Or Mac Pro, have (3x) NVIDIA GeForce GT 120 512MB (Here is the Card info )
    Or anyone can advice me another graphics card better than above for Mac Pro ?
    (Except the NVIDIA Quadro FX 4800)
    Thanks in Advance.

    Two choices, either ATI 4870 can be bought as BTO for $200, or buy with GT120 and add GTX 285 $449 afterwards (not offered as BTO configuration at reduced price).
    ATI seems favored by OS X and Apple applications but has to catch up in some areas, you know, like behind on OpenCL which will take time and work really (and Nvidia with CUDA, GPGPU and Physx has a leg up).
    Or, sit on pins and needles and hope ATI 5870 or GTX 480 (bit, power guzzeler).
    Apple likes to have basic card that doesn't need aux power so has to work @ 75W, and only has two 6-pin, the Fermi cards have 6 and 8-pin, unless revised models of Mac Pro have more options.
    Run Windows, the GTX shines.
    There has never been support for SLI, and recently even CFX was disabled as well.
    Photos of the 480:
    http://www.hardmac.com/news/2010/03/04/first-photos-of-the-geforce-gtx-480
    Specs:
    http://www.hardmac.com/news/2010/03/03/first-information-about-geforce-gtx-480
    And 1.5GB RAM... http://techreport.com/discussions.x/18556

  • Thoughts on Inateck 4 Ports PCI-E to USB 3.0 Expansion Card for Mac Pro (Early 2008 to 2012 Late Version)

    Anyone adding USB 3 ports to the older Mac Pro desktop towers?
    I looked at HighPoint, Orinico and StarTek but I'm leaning towards Inateck given their recent PCI-E board update specifically for Mac Pro.
    Anyone have any USB 3 recommendations or horror stories?  I've got all 4 internal drive bays taken so I don't think I can easily get power to the board, so I'm hoping the internal PCI-E power will be enough for most USB 3 devices.
    thanks,
    Stephen

    There is one that seems to be popular that works with 10.8.2 and above.
    http://forums.macrumors.com/showthread.php?t=1501482&highlight=usb3+pcie

  • GeForce 7300 GT Upgrade Kit for Mac Pro?? G5?

    Hi,
    Just found this on the apple store:
    http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=1643C421&nplm=M A567
    "NVIDIA GeForce 7300 GT Graphics Upgrade Kit for Mac Pro"
    Why is it only for mac pro? its PCI express & my g5 is one of the late 2005 models and it has PCI Express so am i wrong in thinking that this should work fine or is it something to do with the new intel architecture?
    If i remember correctly i could have chosen this card or a very similar one when i configured my G5.
    Thanks

    That card is only for the Mac Pro, as it says.
    When you ordered your G5, you had the choice of the nVidia 6600 (or 6600LE), nVidia 7800GT, or the Quadro FX 4500.
    The 7800GT that you could have ordered with your G5 is close in performance to the ATi X1900XT that is an option on the Mac Pro. The 7300GT that you're looking at is an entry level card, which the 7800GT definitely is not.
    The 7300GT and the X1900XT are both Mac Pro only due to the ROM on the card, which is designed to work with the EFI booting hardware that the Mac Pro uses. The G5s used Open Firmware, which requires a different ROM on the video card. So, even though both your G5 and the Mac Pro are PCI-Express based, these video cards are not compatible.
    Now, most PCI-Express cards that you look at for, say, external SATA, will probably work in both the G5 and the Mac Pro. You'd still want to check the specs to be sure, however.
    If you're looking for a new video card to replace your (presumably) nVidia 6600, your only real option is the ATi X1900 G5 edition. This is a different card than the X1900XT that's offered for the Mac Pro.

  • ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

    I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
    I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

    A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
    from: http://en.wikipedia.org/wiki/HDMI
    You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

  • Reviews for ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro?

    There's no review at the Apple Store on this [ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro (Early 2009 or Early 2008)|http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=NDE4NDMx OA]. Googled and found nothing related to the Mac kit. Mostly PC based.
    Should I consider this card? I need a spare/replacement graphics card for my Mac Pro (early 2008). The NVIDIA GeForce 8800 GT card has failed me twice.

    Just came out on barefeats:
    http://www.barefeats.com/nehal14.html
    Shows new drivers with 285, also compares 4870.
    If you play a lot of games on the windows side, you might also want to consider the 4890. I has recently became flashable (if you're into that kinda thing). It has a lot more leeway to be overclocked. Close to (or if your lucky) hitting the 1 Ghz core clock speed, gives very close comp to the 285, and at fraction of the price. You can get an XFX 4890 on newegg for $195.

  • May I use the power adaptor for Macbook pro into Macbook Air?

    May I use the power adaptor for Macbook pro into Macbook Air?

    Yes.  You can use one of a higher wattage, just not a lower wattage.
    Here's the full info.
    http://support.apple.com/kb/HT2346
    Regards,
    Captfred

  • Accessories for Mac Pro

    Hi, guys. I have a problem here. I am looking for something that can protect against dust or something like that. Because my room is really not that clean, which means there's a lot of dust. I am worrying about the Mac Pro that will "eat" some dust. Question is " Where can I buy that kind of accessories for Mac Pro, like clothing or case?"
    Thanks a lot. Oh, I forget there is also a LED cinema display that need to be protected

    Clean your room. Nah, J/K
    (no, but seriously...clean your room)
    Here are some neat looking ACD covers.
    http://www.radtech.us/Products/iMacDesktop/
    I guess you could also use this: (temporarily)
    http://www.flickr.com/photos/neilchristie/3515875014/

  • What is the best software for home office for mac pro ?

    What is the best software for home office for mac pro ?

    Mac-HaBu X 12.2.0.3.841
    Gnucash 2.4.11
    QuickBooks Pro 2013 14.0.3 R4
    MoneyWorks Gold 6.1r5
    MoneyWorks Express 6.1.r1

Maybe you are looking for

  • File naming best practice

    Hello We are building a CMS system that uses BDB XML to store the individual xhtml pages, editorial content, config files etc. A container may contain tens of thousands of relatively small (<20 Kb) files. We're trying to weigh up the benefit on meani

  • Has any1 tried the Harman Kardon Drive + Play?

    Ok , i saw this on the apple store, i was wondering if any1 has tried it? I am almost at driving age and i am getting a new truck when i can drive and i want my nano to be incorpurated into it in a cool way. this looks cool, but i just dont know. in

  • SQL Server connection only partially encrypting

    Hi all, We have a Java servlet running on Tomcat and Windows and all database connections are encrypted using SSL. This works apart from a strange issue on one of the connections (SQL Server) which I do not understand. I am using WireShark to check t

  • Rebel t4i memory card error

    I have a 3 week old Rebel T4i. Iam using a 16GB Sandisk SDHC card. Went fine for last 3 weeks. All of a sudden, the camera throws out an error message stating "No card in camera". Need help..Has anyone faced this type of error & what can be done to s

  • Photo Optomization

    Hi,    I have been asked this question many of times. How do I have the page/photo load faster with out loosing or minimizing loss in quality of the image? So here is the complexity of my situation: My website: www.libkofficial.com If you take a look