Power consumption for latest mac pros?

I read on Apple.com somewhere that the 2008 Mac pro's maximum power consumption is 260+ Watts for a Quad-core. How different is it for the new Mac pros?

I guess English is a lost language now.
For the Mac Pro it is really really simple and based on 7 yrs of PowerMac G5s and then Mac Pro owners: 1500VA - you can get by with slightly smaller 1300VA and some people, because of better build, used SMART UPS 1000VA.
And as I said in another thread, the Mac Pro 'suffers' from inrush current that can knock out smaller UPS, and people that have tried to use 500-900VA units got into a lot of trouble and had to upgrade.
No one can know the total system watts used other than use a KILLAWATT on the power cord.
Look at the case, can an iMac dispel as much heat as easily? no. It is designed for lower power and much fewer components.
Core i7 has HyperTransport and Turbo boost for one thing. Apple had a huge coding problem with audio (incl iTunes and others), flash and Nehalem based systems. High cpu temperature and lost processor cycles and performance.
The 2010 Mac Pro can do more for the same, and DDR3 lowered heat and watts noticeably.
There are sites where you can plug in various components and get an idea of how large a PSU would be needed. Try one of those, too. PSU efficiency, and there is "overhead" needed for the motherboard chips and to run PCI Express for graphics, Firewire, etc. It all adds up.
Apple's example is low-end system configuration, the chart says CPU MAX, not SYSTEM (but then, most everything on hardware requirements lately needs a grain of salt).
Quad-core 2.66GHz configuration:
One 2.66GHz Quad-Core Intel Xeon "Nehalem" 3500 series processor,
3GB memory (three 1GB 1066MHz DDR3 ECC DIMMs),
640 GB Serial ATA 3 Gb/s 7200-rpm hard drive,
18x double-layer SuperDrive,
NVIDIA GeForce GT 120 with 512MB of GDDR3 memory
APC we know, whether PowerMac 2.0DP from 2003 or Quad G5, or Mac Pro, that 1500VA is strongly recommended.

Similar Messages

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

Are you in the US? Order one from here: http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
Or check out Best Buy.

I have a belkin 7 adapter for additional USB slots for my Mac Pro. It was working well till just recently I am getting a message that says the usb port on the Mac Pro is shutting down due to a very high power drain. Then it shuts the usb port down.

I have a belkin 7 adapter for additional usb ports for my mac pro. It worked fine without problems till recently when the message regarding usb port drawing too much power and the computer shuts the port on the mac pro down. The strip comes with its own power supply adapter. The attachments are additional hard drives used as backups and independent data. Other than disconnecting it are there any fixes?

You're getting the message because you're exceeding the available current, probably as a result of bus-powered drives. The power sources for hubs are rather small. Try using drives with their own power supplies.

I am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the

i am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the complete power unit...it seems odd that you have to buy the whole unit again...thanks.matthew

All you need is a plug adaptor, if required. Apple sells an adapter kit:
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

It would "run" (more like Sunday stroll or walk) if you installed Snow Leopard in a VM. Especially if you have 6-core (and would help to have 6 or 8 cores anyway if you were able to and intend to make best use of nMP for video editing).
If you "classic" Mac Pro was 2009 or later, adding two AMD graphic cards, upgrading the processor to 8-core 3.xGHz would have gotten you a FCP-X capable machine and still dual boot and use Snow Leopard as needed.
Any Mac Pro can now use 1000MB/sec SSD PCIe blade to boot from and/or for scratch and editing to help improve work flow.
SSD Blade Drive for "Classic" Mac Pro

Better for gaming: Mac Pro or 24-inch iMac?

Well, I was already considering a Mac Pro since after I got my G5 iMac I started playing games like WoW and Sims 2 that really push the graphics card to its limit (especially the Sims).
Considering that the iMac setup I want (2.33 GHz, 2GB RAM, 7600GT card) would cost me $2500 before tax, and that I would still have to buy a separate monitor for the Mac Pro, which is the better deal? Is the 7600GT better enough than my current FX5200 that I won't feel the need to upgrade the graphics card in six months?
I'm not one of those that always gets the latest and greatest, but I've been mulling over an Intel Mac purchase for a while now, and I need some help with this decision.
20-inch iMac G5; black iPod nano Mac OS X (10.3.9)

Hello,
I'm sorry, but I believe that an Intel Core 2 Duo is
much faster than the MacPro's processors. Having 4
processors does not mean that the machine will be
faster.
Also, please note that the MacPro and iMac both have
different processors from a different family. Tha
MacPro's processors are designed for servers and
multi-tasking. Playing games is not multi-tasking.
Also, most high-end Windows XP machines have Intel
Core 2 Duo processors in them rather than the
processors that the Mac Pro has.
Sure, the MacPro can be upgraded but there is only a
limited number of hardware that can be put into a
Mac. With Apple, you probably won't need to
upgrade... atleast for 4 or 5 years, depending on
one's usage.
Please consider this,
Robert
I'm sorry, but you are very mistaken. The processors in the iMac are low-power (i.e. laptop) version of those found in the Mac Pro's. The Mac Pro's processors are even faster than the iMac, and not because there is more cores. The Mac Pro is powered by Core 2 Extreme processors, while the iMac is powered by a Core 2 Duo. Intel even quotes the Core 2 Extreme to be "the world's best gaming processor". So the Mac Pro is no doubt more powerful, but since we talking games here, the 2nd processor (3rd and 4th cores) won't get used. A wast of money to get them IMHO. So my recommendation is get the iMac with a 7600GT and 2GB of RAM (or more).
Further reading on the subject:
Intel's Core 2 Extreme (aka Xeon): http://www.intel.com/products/processor/core2XE/index.htm
Intel's Core 2 Duo (aka Merom): http://www.intel.com/products/processor/core2duo/index.htm
iMac 1.83Ghz, 1.5GB RAM (Jan 2006) Mac OS X (10.4.7)

Where can I get an additional power source for my MacBook Pro?

I am travelling to Europe next week and will be travelling on the road quite often. I would like to get some work done during that time. My laptop battery will inevitably run out of power during that time and I would like to carry an additional power source with me so I can get some extra juice when I am nowhere near an outlet.
I have the latest MacBook Pro where the battery is not removable.
Where can I get an additional power source for my MacBook Pro? I don't mind if it is a 3rd party product.

you could get something like this: http://www.amazon.com/Energizer-XP18000-Universal-External-Netbooks/dp/B002K8M9H C
it's about the same cost as an extra battery used to be. there's a range of similiar products at Amazon, i'd check reviews.

Where can I obtain the AHT on disk for my Mac Pro 4.1?

Where can I obtain a disk (iso) of the AHT for my Mac Pro 4.1 (latest OS X Yosemite) that I am busy upgrading?

If you can fiddle with file permissions without going nuts, the original gray discs or the downloads mentioned (once the .dmg is mounted) provide a roughly 60 to 100 MByte .diagnostics [invisible] directory at:
/Volumes/disc_name/System/Library/CoreServices/.diagnostics
You can see this folder (on the DVD or in the download) with the Finder by looking in CoreServices, using the Find command and specifying name .diagnostics and Visibility [invisible].
Open a second Finder window and navigate to the comparable place in the current Directory structure:
/System/Library/CoreServices
drag and drop the .diagnostics directory from the DVD or the download in one window to the current Core Services folder in the other window. Observe carefully to see that it actually does the copy, as Find-ing it in the current directory structure is quirky.
You may have to authenticate as Admin, or you may already have access --
-- otherwise you can change the permissions of the current CoreServices folder to allow you to Read & Write
-- don't forget to change permissions back if you modified them.
NOW try Restart and hold the D key.

Internal Hard Drives for Apple Mac Pro

Hello there,
Does any one have some advice on the following internal HDs. I am in Germany and this is what I have found that I am interested in. I just don't know if they all are for Apple Mac Pro because the provider doesn't specify.
1) HD 1000GB Western Digital RE2 GP, SATA, intern, 3,5'', 7200rpm, 16MB Cache, RoHS compliant, 5 years warranty (not bad eh?) = 139,00 €
2) HD 1000GB Samsung SpinPoint F1 HD103UJ SATA intern 7200rpm 32MB Cache 8,9ms: 109,00 €
3) HD Seagate Barracuda ES.2, 1000GB, SAS, intern, 3,5'', 7200rpm, 16MB Cache, 8,5ms, 5 years warranty: 214,00 €
Any bad experience with Wester Digital? Or recommendations for internal hard drives, they are greatly appreciated!
I was wondering too, does it affect the hard drive, that the bigger it is the shorter it will live? I love having 1T, and I already got 2T EXTERNALS from WesternDigital. But I am certainly concerned that the bigger they get, the more chances to fail the might have. Does this make sense?
I am also a little doubtful about internals, they seem to fail faster than the externals, is this true in most cases?
I just want to have the capability of storing my Aperture Library in an internal HD, for easy access and all the images on an external drive.
Thank you for the advice!!
Cheers!
E.

http://www.barefeats.com/hard94.html
I would get WD Black, Hitachi (latest, not their earlier model) or Seagate (no need to spend on ES).
WD has been excellent in Mac Pro, I just would skip on GP.
I only had one drive with 4 bad blocks in 20 WD drives.
Personally, I would get 4 x 640GB WD Caviar drives for internal. They are fast, quiet, and run cool. And sells for US$80.
http://www.wdc.com/th/products/products.asp?driveid=394
http://eshop.macsales.com/item/Western%20Digital/WD6400AAKS/
http://www.barefeats.com/harper14.html

Power Consumption for iMac 20" INTEL DUO CORE

I need to know which is the power consumption for the 20" 2.16 GHz INTEL CORE DUO. I want to buy a UPS for this machine and I could not figure out in any place within the manual where to get that information. It is something that have to be very easy to find but it was not the case for me in this opportunity.
I cannot believe that I have to create a post in order to get this answer!
Kind regards to all and thanks for any clue that any one can give me.
iMAC 2.16 Dual CORE 20" Mac OS X (10.4.8)

Welcome to the discussions!
Another vote for APC. I use the XS900 for my first gen G5 iMac and it works very nicely without their PowerChute software. It even comes with the correct USB cable to hook it into your Mac.

8800 GT cards ARE available for older Mac Pros...

http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?s=topSe llers&fnode=home/shopmac/macaccessories/displays&nplm=MB560Z/A&mco=OTkzNDY

Frank Einstein wrote:
do you think windows will auto-detect the card, since i used my bootcamp install cd to install the drivers for my current windows installation, would it have the drivers for this card installed or no?
currently using the x1900 right now with just the bootcamp drivers.
Before you swapped cards I would download the nVidia drivers now and put them somewhere on your Windows drive, make a folder for them. I'm not sure if you are using XP or Vista. Vista has a larger driver library (and newer) and I would think would detect it, but I'd still want the latest and greatest from nVidia's site.
Worse that can happen is you'd have to start Windows in Safe Mode (basic VGA drivers) and then run the nVidia driver setup from the file you had previously downloaded.
I just ordered the card for my Mac Pro. I had to downgrade my ATI x1900XT due to stability issues.
Steve

How do I use Airport Extreme to act as a wireless receiver for a Mac Pro?

Hello -
I'm trying to use an Airport Extreme (1st Generation) as a wireless receiver for a Mac Pro but I can't figure out how. My main modem / wireless router (non-Apple) is upstairs. My Mac Pro is down stairs. I'm looking to get internet connection for that Mac Pro downstairs. Is it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
Thanks for the help.
Nathan

Is it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
Unfortunately, Apple designed their routers to work with other Apple routers. It would be extremely unilikely that the AirPort Exteme could be configured to work with a router from another manufacturer.
The AirPort Extreme would need to be configured to "Extend a wireless network", but an error message is almost surely to occur when you try this.
There are other alternatives, but they would involve more hardware. Post back if you are interested.

Can an iMac be used as a monitor for a Mac Pro?

Hi all,
I'm getting nowhere looking in the search, so I'm hoping someone can clear something up for me:
is it possible to use an iMac as a display for a Mac Pro?
I am beginning to think I'd better get a Mac Pro, but I already have an iMac, for which I've been researching getting external storage so I can do Final Cut Studio editing and back up of it all... as someone suggested, might be better in the long run to just get it all in the Mac Pro, and have the option and simplicity to upgrade as and when... but then there's the need for a display for the Mac Pro, which does whack the price up... but if I could use this iMac, what a beautiful monitor...
I thought someone said that Final Cut would not allow another computer to be attached though... is that the case, anyone know?
Thanks for any knowledge and help, much appreciated... I'm learning to not rush into anything, as you learn more the whole picture seems to change!
Cheers, Syd

The current 27-inch iMac can. Other iMac models can't outside of a VNC setup or ScreenRecycler; all such solutions require a standalone monitor for setup and troubleshooting.
(51433)

When I power up my 2008 Mac Pro I get the "welcome", chime, fan goes on, a light goes on on my Apple monitor and then nothing - black screen. Whats going on?

When I power up my 2008 Mac Pro I get the "welcome chime", fan comes on, a light comes on on my Apple moniter and then nothing - black screen. What,s going on?

what you describe as the "welcome chime" is the indicator that your Mac has passed the Power-On Self test, and if a suitable source of software can be found, booting is likely.
If the screen stays dark, the most likely explanation is a graphics card failure. But it could also be caused by a backlight failure in the LCD, so be sure you try shining a bright light at the screen to be check whether the picture is there, but just not illuminated.
Graphics card failure will end the boot-up process in some cases, and not have an impact in others. Two external indications you can use when your display is not working are: The Caps Lock key, which is under the control of Mac OS X, and the Control-Eject dialog box shown below. Note that the default is Shutdown, so a Mac that shuts down in response to Control-Eject followed by Return is working fine.

Please help me ,i forgot the synchronising password for my mac pro lion backup disk

please help me ,i forgot the synchronising password for my mac pro lion backup disk

If the backup volume is encrypted, and you forgot the password, then you'll have to erase the volume and start a new backup. There's no way to recover the password.

Power consumption for latest mac pros?

Similar Messages

Maybe you are looking for