Power consumption standby and turned off

Hi there,
I tested the power consumption of my new Mac Pro with a watt meter while in standby mode and while turned off. In both tests I got nearly the same figures -around 35 watt.
Do you have these too or do I have a problem?
Thanks guys,
Mclane

In sleep my watt meter is reporting 3 watts.
If I have allow bluetooth device to wake up computer enabled in the bluetooth settings I the watt meter reports 5 watts during sleep.
Not seeing anything when shutdown.
I have not got any usb or firewire devices connected.
Do you have any usb or firewire devices connected ?
According the the apple dev docs the Mac Pro provides power to the firewire ports during sleep and will also provide firewire power when shutdown if firewire devices were already connected.

Similar Messages

  • Satalite P300D: standby and turning off problem

    I have a problem with especially the standby modus. When I close the laptop he is supposed to go to standby, and sometimes he just does that, but other times(especially if I do it two times after eachother) the ventilator will go on extremely loud and the screen will turn black and the only way to stop this is to push the on/off button until the laptop shuts off. Sometimes I have the same problem with shutting the laptop down.
    I think it started right after installing windows 7, could it have something to do with that?

    Hi mate
    Well, this could be possible since the Win 7 supports a little bit different power management settings as well.
    I recommend checking the BIOS.
    You should update it if a newer version is available.
    Furthermore you should install the Win 7 VAP (value added package) which can be downloaded from the Toshiba European driver page

  • I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

    I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

    Hello there, LynnS.
    The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
    OS X Mavericks: Erase and reinstall OS X
    http://support.apple.com/kb/PH14243
    Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
    OS X Mavericks: Recover your entire system
    http://support.apple.com/kb/PH14185
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    Are the lines like psychedelic herringbone?  If yes, I had that happen once, it was something serious, like the
    Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP.  I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
    Good luck and don't panic.

  • My new iPad 3 doesn't seem to charge well. If it's plugged in and I'm using it, it doesn't seem to charge. It only charges well when it's plugged in and turned off.

    My iPad 3 bettery life is very poor, and it doesn't chrage when it's plugged in and I'm using it, only when it's plugged in and turned off. I'm beginning to be sorry I bought this iPad and that I should have stuck with the iPad 2.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
     Cheers, Tom

  • Kernel Panic: You need to restart you computer. Hold down the Power button until it turns off, then press the Power button again.

    I apologize for writing a book, but I think explaining the full story may possibly get me a correct answer.  I hope that someone can give me some insight as to what is the problem with my MacBook Pro.  I have a MacBook Pro (15-inch Early 2008), model identifier: MacBookPro4,1 running OSX Lion 10.7.5 with 6 GB memory.  My wife first noticed a problem with the display.  Every so often it would get fuzzy with jumping lines going across the screen making it vitually unviewable.  The final time that incident took place the computer froze which required holding down the power button to restart the computer.  The computer started up to the point of the Apple logo and the spinning gear for quite some time until the screen darkened from top to bottom displaying the following message in five different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again."  I have read other blogs and support communities where people get the message intermittently, but my computer would not go past that point no matter what.  Through research and the Apple Store I was told that this is a Kernel Panic.  The so called "Apple Genius" at the local Apple Store was unable to get the computer to boot past that point even with his gadget.  It would not startup in recovery mode, safe mode or off of a disc.  I forget exacty what he told me, but he said it was getting past the first two startup steps, but it would not get past the third step which is to mount the desktop.  He guessed that it may be a problem with the hard drive; a loose wire or something or other.  I disconnected the hard drive completely and took it out.  Everything appered to be connected properly.  Then I installed it back correctly, but it did not solve the issue.  So I guess I disproved his theory of a loose wire...  I purchased ProSoft Data Rescue 3 and connected my MacBook Pro to another Apple computer using a firewire 400 cable.  I was able to get everything I needed off of the hard drive.  I did some more research and I decided to restart the MacBook Pro in verbose mode (holding down the command button and V button).  The computer magically started up!!!  I was upset that I wasted my money on the ProSoft Data Rescue 3.  I managed to take additional items off of the computer and back it up on to an external hard drive.  After some time the computer froze.  I repeated the power button process to restart and received the same kernel panic.  I managed to get the computer to startup approximately six or seven more times via verbose mode; each time the computer staying on for a shorter amount of time before it would freeze.  I managed to run Disk Utitlity.  I performed first aid to fix the hard drive and it said that the hard drive appeared to be fine.  After first aid I erased the hard drive and booted off of a Lion disc to perform a clean install or an erase and install.  Lion installed until the progress bar got the the end where I received a message that there was an error installing Lion, please try again.  Each time I attempted to install the software I would receive the same message.  Eventually the computer would not boot from the Lion disc.  I went back to the Apple Store and the Apple Genius was able to get the computer to boot off of his gadget where Lion istalled completely.  I set up the computer as a new computer.  He said that he partitioned the hard drive as DOS and then back to Mac OS Extended (Journaled) which would get rid of any errors the drive may have had.  He guessed that the problem was the hard drive, but was not exactly sure.  When I brought it home I installed all of the software applications I had on it previously.  Approximately three days later, which may have been the fifth of sixth time starting up the computer, the display became fuzzy again and the computer froze.  The computer did restart once and I was able to retreive a "log" which I have pasted below.  After if froze for the second time it restarted once using verbose mode and froze almost immediately.  After holding down the power key to shut it down and then restart; I received the same kernel panic after the Apple logo and spinning gear which put me right back to square one.  Now the computer will not boot via any method.  It freezes at the end of verbose mode which forces you to hold down the power button to shut down.  I also read that poorly seated ram may cause this issue, but I removed and installed the ram multiple times.  I even purchased new ram from Other World Computing (Mac Sales) 6 GB, but that did not make a difference.  I think I may see six possible problems on the verbose screen mode, five errors and one warning; I will type them out here:
    1. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key $Num (kSMCKeyNotFound)
    2. SMC: :smcReadKeyAction ERROR: $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    3. SMC: :smcInitHelper ERROR: MMIO regMap ==NULL - fall back to old SMC mode
    4. WARNING - ACPI_SMCCtrlLoop: :initCPUCtrlLoop - no sub-config match for MacBookPro4,1 with 8 p-states, using default stepper instead
    5. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
    6. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
    I was hoping that someone could read my log to ascertain wether or not they see a problem that stands out.  I was also hoping that someone could tell me if verbose mode provides any information that may be wrong with my computer.  I just hope that someone can give me some insight as to what may be wrong with my computer.  If it is the hard drive I will easily replace it, but I want to make sure that is the problem first before I waste money on a hard drive or anything else.  Please let me know if anyone requires any other information from me.
    Thank you!
    Interval Since Last Panic Report:  21959 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    B62D9AB4-53DD-4F76-90B2-32453302297E
    Sat Aug 31 15:20:06 2013
    panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d9d774, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000011d06000, CR4: 0x0000000000000660
    RAX: 0x0000000000000004, RBX: 0xffffff809eb71000, RCX: 0xffffff8000892604, RDX: 0xffffff80b69d3aa8
    RSP: 0xffffff80b69d3bd0, RBP: 0xffffff80b69d3bd0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000010751b4, R10: 0xfffffffffffffff4, R11: 0xffffff8000640fd4
    R12: 0xffffff809eb71000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000010
    RFL: 0x0000000000010202, RIP: 0xffffff7f81d9d774, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x0000000000000010, Error code: 0x0000000000000000, Faulting CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80b69d3880 : 0xffffff8000220792
    0xffffff80b69d3900 : 0xffffff80002c4794
    0xffffff80b69d3ab0 : 0xffffff80002da55d
    0xffffff80b69d3ad0 : 0xffffff7f81d9d774
    0xffffff80b69d3bd0 : 0xffffff7f81d8913a
    0xffffff80b69d3c20 : 0xffffff7f81d89928
    0xffffff80b69d3c40 : 0xffffff7f81d5be8f
    0xffffff80b69d3c70 : 0xffffff7f8087f832
    0xffffff80b69d3cb0 : 0xffffff7f8087f93d
    0xffffff80b69d3cd0 : 0xffffff7f8088b625
    0xffffff80b69d3d40 : 0xffffff7f80889c76
    0xffffff80b69d3d80 : 0xffffff80006245ca
    0xffffff80b69d3dd0 : 0xffffff8000657d4e
    0xffffff80b69d3e30 : 0xffffff80002a3851
    0xffffff80b69d3e80 : 0xffffff8000223096
    0xffffff80b69d3eb0 : 0xffffff80002148a9
    0xffffff80b69d3f10 : 0xffffff800021bbd8
    0xffffff80b69d3f70 : 0xffffff80002aef10
    0xffffff80b69d3fb0 : 0xffffff80002daec3
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000->0xffffff7f808acfff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
             com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d590 00->0xffffff7f81e1bfff
                dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro4,1 (Mac-F42C89C8)
    System uptime in nanoseconds: 62230646656
    last loaded kext at 53384504695: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81efc000, size 45056)
    loaded kexts:
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AudioAUUC 1.59
    com.apple.driver.AppleTyMCEDriver 1.0.2d2
    com.apple.driver.AppleUpstreamUserClient 3.5.9
    com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
    com.apple.driver.AppleHDA 2.2.5a5
    com.apple.GeForce 7.3.2
    com.apple.driver.SMCMotionSensor 3.0.2d6
    com.apple.driver.AppleSMCPDRC 5.0.0d8
    com.apple.driver.AppleSMCLMU 2.0.1d2
    com.apple.driver.AppleMuxControl 3.1.33
    com.apple.driver.AppleBacklight 170.2.2
    com.apple.driver.AppleMCCSControl 1.0.33
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AudioIPCDriver 1.2.3
    com.apple.driver.ApplePolicyControl 3.1.33
    com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
    com.apple.driver.AppleLPC 1.6.0
    com.apple.driver.AppleUSBTCButtons 227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
    com.apple.driver.AppleUSBTCKeyEventDriver 227.6
    com.apple.driver.AppleUSBTCKeyboard 227.6
    com.apple.driver.AppleIRController 312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 33
    com.apple.iokit.SCSITaskUserClient 3.2.1
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.1.0
    com.apple.iokit.AppleYukon2 3.2.2b1
    com.apple.driver.AppleUSBHub 5.1.0
    com.apple.driver.AppleAHCIPort 2.3.1
    com.apple.driver.AppleEFINVRAM 1.6.1
    com.apple.driver.AirPortBrcm43224 501.36.15
    com.apple.driver.AppleFWOHCI 4.9.0
    com.apple.driver.AppleIntelPIIXATA 2.5.1
    com.apple.driver.AppleUSBEHCI 5.1.0
    com.apple.driver.AppleRTC 1.5
    com.apple.driver.AppleUSBUHCI 5.1.0
    com.apple.driver.AppleHPET 1.7
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 1.5
    com.apple.driver.AppleSMBIOS 1.9
    com.apple.driver.AppleACPIEC 1.5
    com.apple.driver.AppleAPIC 1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
    com.apple.nke.applicationfirewall 3.2.30
    com.apple.security.quarantine 1.4
    com.apple.security.TMSafetyNet 8
    com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
    com.apple.kext.triggers 1.0
    com.apple.driver.DspFuncLib 2.2.5a5
    com.apple.nvidia.nv50hal 7.3.2
    com.apple.nvidia.nvGK100hal 7.3.2
    com.apple.nvidia.nvGF100hal 7.3.2
    com.apple.NVDAResman 7.3.2
    com.apple.iokit.IOFireWireIP 2.2.5
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.driver.AppleSMBusController 1.0.10d0
    com.apple.driver.AppleHDAController 2.2.5a5
    com.apple.iokit.IOHDAFamily 2.2.5a5
    com.apple.iokit.IOSurface 80.0.2
    com.apple.iokit.IOSerialFamily 10.0.5
    com.apple.iokit.IOAudioFamily 1.8.6fc18
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleGraphicsControl 3.1.33
    com.apple.iokit.IONDRVSupport 2.3.4
    com.apple.iokit.IOGraphicsFamily 2.3.4
    com.apple.driver.AppleSMC 3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
    com.apple.driver.AppleSMBusPCI 1.0.10d0
    com.apple.driver.IOPlatformPluginFamily 5.1.1d6
    com.apple.driver.AppleFileSystemDriver 13
    com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
    com.apple.iokit.IOBluetoothFamily 4.0.8f17
    com.apple.driver.AppleUSBMultitouch 230.5
    com.apple.iokit.IOUSBHIDDriver 5.0.0
    com.apple.driver.AppleUSBMergeNub 5.1.0
    com.apple.driver.AppleUSBComposite 5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOATAPIProtocolTransport 3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
    com.apple.iokit.IOUSBUserClient 5.0.0
    com.apple.iokit.IOAHCIFamily 2.0.8
    com.apple.iokit.IO80211Family 420.3
    com.apple.iokit.IONetworkingFamily 2.1
    com.apple.iokit.IOFireWireFamily 4.4.8
    com.apple.iokit.IOATAFamily 2.5.1
    com.apple.driver.AppleEFIRuntime 1.6.1
    com.apple.iokit.IOUSBFamily 5.1.0
    com.apple.iokit.IOHIDFamily 1.7.1
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 177.11
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.DiskImages 331.7
    com.apple.iokit.IOStorageFamily 1.7.2
    com.apple.driver.AppleKeyStore 28.18
    com.apple.driver.AppleACPIPlatform 1.5
    com.apple.iokit.IOPCIFamily 2.7
    com.apple.iokit.IOACPIFamily 1.4
    Model: MacBookPro4,1, BootROM MBP41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 6 GB, SMC 1.27f3
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, 0x4354353132363441433636372E4D31364643
    Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7FBAFFFFFFFFFF, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.15)
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-867
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

    I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card.  I also was well aware that Apple offered a replacement program that ended in December of 2012.  I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store.  I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no.  He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime.  When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board.  I asked myself, how can a flawed hard drive cause the screen to act funny.
    nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses."  I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it.  I guess I will look into purchasing a new machine when I have the funds.  Again...thank you both!

  • When trying to use App Store I get a message "could not sign in an unknown error has occurred." I reset our connection and turned off iPad. Any suggestions?

    When trying to use the App Store, I get a message "could not sign in, an unknown error has occurred,  any suggestions what is wrong?  I reset our Internet and turned off the iPad. 

    Sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try again.

  • My iphone 4 contantly has no service and turns off by itself all the time?

    my iphone 4 contantly has no service and turns off by itself all the time?

    Hi hqhair@aol,
    If you are having unusual service and shut off issues with your iPhone, you may find the following articles helpful:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    iPhone: Hardware troubleshooting (under the Power/Battery section)
    http://support.apple.com/kb/ts2802
    Regards,
    - Brenden

  • System boots and turns off in seconds

    My system is hp dv7 4010tx it was working perfectly and suddenly it turned off and now just power on all lights up and fan run just for seconds and turns off I have done the hard reset still nothing can u guys plz help me ?

    Hi pvharis,
    Thank you for joining the HP Forums! It will be hard to determine the exact cause of the problem if it doesn't stay on. At the moment it just turns for a few seconds and then dies away. There could be a problem with the battery or the power cord possible not charging properly. Do you have another power cord that you could try? Do you ever see the Num or Caps Lock keys flashing? If so how many times does it flash?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Whenever I connect to network from datacard. My system show as message "Restart your system.Hold the power button until system turn off"

    I have purchased new MAC Book Pro recently. When connect to net using my datacard, net start's working after some time system fire a message saying that "Restart Your System. Hold power button until system turn off". I have configure network setting too even i am facing the problem.
    Please suggest me were I am going wrong.
    Bug Report Shown as :
    Interval Since Last Panic Report:  12616 sec
    Panics Since Last Report:          7
    Anonymous UUID:                    947C5556-58AF-4B93-886D-6EDB24957F96
    Wed May 25 19:55:50 2011
    panic(cpu 3 caller 0xffffff80002d11f4): Kernel trap at 0xffffff80002c5330, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000000100000, CR4: 0x0000000000040660
    RAX: 0xffffff800c5eac40, RBX: 0x0000000000000008, RCX: 0x0000000001000000, RDX: 0x0000000000000008
    RSP: 0xffffff805f753cf0, RBP: 0xffffff805f753cf0, RSI: 0x0000000000000002, RDI: 0x0000000000000008
    R8:  0x00000000418df000, R9:  0x0000000000000000, R10: 0x0000000000000000, R11: 0xffffff80004f4e5e
    R12: 0x0000000000000008, R13: 0x0000000000000246, R14: 0xffffff805f753d10, R15: 0x0000000000000010
    RFL: 0x0000000000010286, RIP: 0xffffff80002c5330, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 3), Frame : Return Address
    0xffffff805f753990 : 0xffffff8000204d15
    0xffffff805f753a90 : 0xffffff80002d11f4
    0xffffff805f753be0 : 0xffffff80002e3f1a
    0xffffff805f753bf0 : 0xffffff80002c5330
    0xffffff805f753cf0 : 0xffffff80002503c8
    0xffffff805f753d10 : 0xffffff7f80852d23
    0xffffff805f753f20 : 0xffffff7f8085325c
    0xffffff805f753fa0 : 0xffffff80002c84f7
          Kernel Extensions in backtrace (with dependencies):
             com.apple.iokit.IOSerialFamily(10.0.3)@0xffffff7f80850000->0xffffff7f80859fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10J3210
    Kernel version:
    Darwin Kernel Version 10.7.1: Mon Jan 31 14:55:53 PST 2011; root:xnu-1504.10.48~4/RELEASE_X86_64
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 965216859070
    unloaded kexts:
    com.apple.filesystems.cd9660          1.4.1 (addr 0xffffff7f80f3c000, size 0x32768) - last unloaded 555132792378
    loaded kexts:
    com.ZTE.driver.ModemDriverMacEx          1.0.6d1
    com.apple.driver.AppleHWSensor          1.9.3d0
    com.apple.driver.AGPM          100.12.31
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleMikeyHIDDriver          1.2.0
    com.apple.driver.AppleHDA          2.0.2f9
    com.apple.driver.AppleMikeyDriver          2.0.2f9
    com.apple.driver.AudioAUUC          1.53
    com.apple.driver.AppleUpstreamUserClient          3.5.3
    com.apple.driver.AppleMCCSControl          1.0.17
    com.apple.driver.SMCMotionSensor          3.0.1d2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.6.0d12
    com.apple.driver.AppleLPC          1.5.1
    com.apple.driver.AppleBacklight          170.0.43
    com.apple.kext.AppleSMCLMU          1.5.2d6
    com.apple.driver.AppleIntelHDGraphics          6.3.0
    com.apple.driver.AppleIntelSNBGraphicsFB          6.3.0
    com.apple.driver.AppleUSBTCButtons          201.2
    com.apple.driver.AppleUSBTCKeyboard          201.2
    com.apple.driver.AppleIRController          303.8
    com.apple.BootCache          31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.iokit.SCSITaskUserClient          2.6.6
    com.apple.iokit.IOAHCIBlockStorage          1.6.3
    com.apple.driver.AppleSDXC          1.0.2
    com.apple.driver.AppleUSBHub          4.2.0
    com.apple.driver.AppleSmartBatteryManager          160.0.0
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.driver.AirPort.Brcm4331          429.10.1
    com.apple.iokit.AppleBCM5701Ethernet          3.0.2b8
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleAHCIPort          2.1.6
    com.apple.driver.AppleUSBEHCI          4.2.0
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.4.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.11
    com.apple.iokit.CHUDUtils          364
    com.apple.iokit.CHUDProf          366
    com.apple.driver.AppleIntelCPUPowerManagement          142.4.0
    com.apple.nke.ppp          1.5 - last loaded 520102234363
    com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.6
    com.apple.iokit.IOUSBMassStorageClass          2.6.6
    com.apple.driver.AppleThunderboltDPOutAdapter          1.1.1
    com.apple.driver.AppleThunderboltDPInAdapter          1.1.1
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.1.1
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.0.5
    com.apple.driver.DspFuncLib          2.0.2f9
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.AppleThunderboltNHI          1.1.9
    com.apple.iokit.IOThunderboltFamily          1.2.2
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.3f1
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleHDAController          2.0.2f9
    com.apple.iokit.IOHDAFamily          2.0.2f9
    com.apple.iokit.AppleProfileFamily          41.4
    com.apple.driver.IOPlatformPluginFamily          4.6.0d12
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.0
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.iokit.IONDRVSupport          2.2
    com.apple.iokit.IOGraphicsFamily          2.2
    com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.3f1
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.3f1
    com.apple.iokit.IOBluetoothFamily          2.4.3f1
    com.apple.driver.AppleUSBMultitouch          207.5
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.driver.AppleUSBMergeNub          4.2.0
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.6
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.driver.XsanFilter          402.1
    com.apple.iokit.IOAHCISerialATAPI          1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.6
    com.apple.iokit.IOUSBUserClient          4.2.0
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOAHCIFamily          2.0.5
    com.apple.iokit.IOUSBFamily          4.2.0
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          6
    com.apple.iokit.CHUDKernLib          365
    com.apple.driver.DiskImages          289
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.1
    com.apple.iokit.IOACPIFamily          1.3.0
    Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.10.1)
    Bluetooth: Version 2.4.3f1, 2 service, 19 devices, 1 incoming serial ports
    Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x8509, 0xfa200000 / 3
    USB Device: Hub, 0x0424  (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x821a, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0245, 0xfa120000 / 4
    USB Device: Hub, 0x0424  (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd110000 / 3
    Thanks,

    I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card.  I also was well aware that Apple offered a replacement program that ended in December of 2012.  I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store.  I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no.  He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime.  When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board.  I asked myself, how can a flawed hard drive cause the screen to act funny.
    nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses."  I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it.  I guess I will look into purchasing a new machine when I have the funds.  Again...thank you both!

  • Have not been able to use keynote if it's linked to icloud. It just starts and turns off quickly.  No problem if I toggle off using icloud. Any ideas.

    Have not been able to use keynote if it's linked to icloud. It just starts and turns off quickly.  No problem if I toggle off using icloud. Any ideas.

    Have you updated to the latest level of Keynote on your iPad? Keynote 2.0.1 (1075)  - Check Settings > Keynote
    If so, there isn't much that you can do other than report this bug to Apple http://www.apple.com/feedback/ipad.html
    You could try restarting or resetting your iPad.
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • My laptop won't start up, I want to back it up via firewire, but it is filevault protected. How do I login and turn off vilevault?

    My laptop won't start up, I want to back it up via firewire, but it is filevault protected. How do I login and turn off vilevault? When I connect to another computer via firewire and try to transfer files, finder freezes.

    To use FireWire target disk mode
    Make sure that the target computer is turned off.
    If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
    Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
    Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
    When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
    Press the target computer's power button to turn it off.
    Unplug the FireWire cable.

  • I changed my setting pon my capsule and turned off wireless... Now I can't "find" it again! Any suggestions?

    I changed my setting pon my capsule and turned off wireless... Now I can't "find" it again! Any suggestions?

    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.
    What version TC is it??
    What OS are using and what version airport utility?

  • My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours and

    My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours hoping it would reload and work.  No luck.

    Hello KCC4ME,
    You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/HT1564
    If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
    OS X Mavericks: If you think you have incompatible login items
    http://support.apple.com/kb/PH14201
    Cheers,
    Allen

  • My E pad has stopped directing me to my att/yahoo e mail. It gives me a notice that i must go to Settings, Safrai and turn off Private Browsing. I have tried for 2 days to find private browsing on my safrai site, and it is just not there.

    Forsome reason, after two years, my E Pad is refusing to go to my att.Yahoo e mail...It says to go to Settings Safari Private Browsing and turn off Private Browsing. There is not place on the Safrari page that gives me Private Browsing. It explains it as being dark when turned on, but no place to turn it on or off.  Also it seems to go to Yahoo Mail instead of Att..Yahoo when it gives me the above message....Any One know what todo?

    As of iOS 7, private browsing is not longer handled in the Settings app, but in Safari directly. The only Settings function for Safari that may impact this would be Block cookies.
    Private browsing is turned on and off in Safari using the button in teh lower left of the Safari screen (if you do not see this, tap the + icon in the upper right to pull up an empty tab).

Maybe you are looking for

  • Runtime Error : cl_gui_frontend_services file_copy

    Dear Experts, I am using the method cl_gui_frontend_services=>file_copy to copy file from one location to another location. But when either of the input parameters are invalid, the program throws a short dump like path_not_found, access_denied, file_

  • I'd like to select print paper size with using AxAcroPDFLib method depend on user

    I'd like to select print paper size with using AxAcroPDFLib method depend on user request. Is it possible? in AxAcroPDFLib? Is there any method to select print paper size in the C# programming. Or if you know another method, please introduce how to u

  • Nokia Lumia 920 lock screen Maximum retry limit

    Please anyone with information on the maximum retries allowed on the lock screen of the Lumia 920. I am just a bit curious. Thank you Ecclesiastes 3 Black Lumia RM-821 1232.5957.1308.0001 Solved! Go to Solution.

  • Communication language- contract

    Hi, In contractlanguage is english, which came from vendr master.  Now we changed lang to French in vendor master, but the same is not reflecting in contract.  Is there any way so that communication language can be changed in contract. Edited by: Ale

  • Column header for file append ?

    My output txt file is getting appended eachtime. If i need to have my column header, everytime the data is appended the header is added as new line as well. I use parameter 'Data.addHeaderLine = 1' on my FCC. Current: H1                H2