POWER CONTROLLER DRIVER FOR WINXP. - MODEL405624Q

I have bought Lenovo 3000 - model 405624Q and installed WINXP on it.  But i am unable to find the drivers for the following devise for windows xp professional.
1.  Lenovo ACPI compliant Virtual Power Controller
I tried to locate the driver for this devise on net also, but couldnt find it.  .  I tried to install it from the driver CD provided with the unit, but its only having vista drivers and vista driver is not working for this particular devise.  Can you please provide windows xp driver for this devise. since this devise doesnt have driver, the NOVO switch is not working as well
Please advise
shai

Shai,
That model sounds like a version of the Lenovo 3000 G510 system.   It may be that as a newer model, only Vista is officially supported.   I have not found any XP drivers for it on the website, but only the earlier G400/G410 models.
I do not have these models, so I can't test, but you may be able to use some of the G410 drivers.
HERE is the link to the G410 drivers.
Someone else may have more information for you.
UPDATE - HERE is a driver for power management that may work for you
Mark
Message Edited by Mark_Lenovo on 06-23-2008 01:49 PM
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Help With Multimedia Audio Controller Driver For XP Pro

    Hello,
    Please help!!!
    I am trying to locate the Multimedia Audio Controller Driver for XP Pro for an MSI 645 ULTRA (A6547MS) Motherboard.  The audio device is integrated into the motherboard and Windows XP Pro is not recognizing the device.
    I have tried looking at MSI Support Website but am unable to identify which is the correct driver package to use.  
    I would also like to know if there are any related WinXP Supplement driver package needed for this motherboard.

    Did you do a clean installation of XP or you only use the upgrade function?
    I recommend you to do clean installation if you didn't.

  • Nvidia 320m driver for WinXP on mac mini

    I hope that this post is appropriate in this category…
    I just get my new mac mini and start to become a mac user. But due to the fact that many of the software I use for my work only run on Windows, I have to bootcamp WinXP.
    After I install the drivers from bootcamp disc on WinXP, there are still some problems on the following devices:
    Ethernet Control Card
    SM Bus Controller
    Slave Processor
    VGA Control Card
    I don’t know how the first three devices would affect, but VGA Control Card do bothers me since I can’t even browse the website smoothly.
    I search the net and it seems that NVIDIA DRIVERS 258.96 WHQL would work. I download it and it doesn’t work for me. I also find that the 320m driver for WinXP is on this link: http://files.me.com/jason_fearing/jai1zj. But this link seems shut down.
    I would appreciate if anyone is kind to help me.

    I really would like to update my Nvidia 320M drivers also there has to be a way
    the drivers like you said are very outdated
    please get us some updates apple

  • Need SM Bus Controller Driver for A75-S231

    Unfortunately I am without my system and backup disks and I am in desperate need of a driver for the SM Bus Controller. Problem surfaced after re-install of XP Home.
    I called Toshiba tech support to identify the motherboard chipset shipped with my unit (specs listed at end of post) so as to locate and download the driver. Unbelievably, Tech is not equipped to identify the make or model of my motherboard or identify the chipset. Third Party software tells me I have a Toshiba EDW10 Motherboard and tech searched the internet and told me I have some VIA motherboard and good luck finding your driver.
    Please help, I didnt think that Toshiba of all people would be unable to identify their own systems but here I am 4 hours later bothering you good people and still hunting. Does anyone have the SM Bus controller driver for the A75-S231 or tell me what chipset was shipped with my unknown motherboard?
    My system specs are as follows:
    OS Name Microsoft Windows XP Home Edition
    Version 5.1.2600 Service Pack 2 Build 2600
    System Manufacturer TOSHIBA
    System Model Satellite A75
    System Type X86-based PC
    Processor x86 Family 15 Model 4 Stepping 1 GenuineIntel ~3333 Mhz
    Processor x86 Family 15 Model 4 Stepping 1 GenuineIntel ~3333 Mhz
    BIOS Version/Date TOSHIBA V1.30, 9/10/2004
    SMBIOS Version 2.31
    Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
    Total Physical Memory 512.00 MB
    SM Bus Controller Device ID (from Device Manager) PCI\VEN_1002&DEV_4353&SUBSYS_FF001179&REV_18\3&61A AA01&0&A0
    Motherboard Toshiba EDW10???
    Thanks fo your help.

    Hi
    As far as I know your unit must be an US notebook model and please try to check Toshiba US download page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    Please dont be mad on tech support but I dont see any reason why they should know every technical detail of your notebook. Toshiba has designed drivers for every hardware component that you can have anytime you want and install it 1000 times if you want. Toshiba guarantee that it will work properly and I dont see any problem there.
    Technical details you can get from Authorized service partners in your country.
    Good luck!

  • How Can I get v1.52 of "ThinkPad Power Management driver for Windows"?

    The subject says it all: How can I get v1.52 of the "ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE - ThinkPad" driver? Since installing v1.53 I've been experiencing screen issues (screen goes dark, and it's very hard to get the screen brightness back to normal) that seem to be tied to my T40p entering sleep mode / turning off the screen.
    I want to see if reverting back to v1.52 fixes these problems.
    Thanks,
    RocketDude
    RocketDude
    T400s 2801-CTO

    Nilst,
    Issue has been escalated however currently pending the team to fix it. Will update once I have news from them.
    *Non Lenovo employee*
    I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

  • Power management driver for xp?

    hello, where can I find power management driver for xp - I founbd lenovo site with drivers but there is no power management driver,
    michal
    Solved!
    Go to Solution.

    Try the S10e driver at http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_979.html

  • USB Serial Controller Driver for windows 7 64bit

    USB Serial Controller Driver for hp 15-g049au windows 7 64bit
    This question was solved.
    View Solution.

    Hi,
    Install the Chipset drivers on the following link and reboot.
    http://support.amd.com/en-us/download/chipset?os=Windows%208.1%20-%2032
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • When comes N200 power manager driver for 7? Hotkeys not working without it.

    Hello,
    Will be there release for power manager driver for Windows 7?
    I did install all drivers, could find under download for 7 and infact, without power manager driver hotkeys (sleep, hibernate) on N200 do not work.
    Solved it with installing Vista power manager driver with compatibility mode and bingo, all keys started work and I'm able to sleep/hibernate my laptop.
    Why isn't there driver for 7 if without it things do not fully function?

    try these : 32 bit - 64 bit or try smart downloading

  • X240 power management driver for Windows 8.1

    Installed the power management driver for Win 8.1   I am using the registry to START and STOP my charging process with the following reg keys ( I am doing it this way since there is no Power Manager software):
    ChargeStartControl
    ChargeStartPercentage
    ChargeStopControl
    ChargeStopPercentage
    Been using it for a while, I dont allow the battery to charge unless it is under 35% and I was stoping at 85%.
    I tried changing the stop back to 100% and it will not change past 85%.   I have rebooted, unistalled the driver, removed microsoft ACPI, replaced ACPI .. Nothing works.   This was working about a month ago.
    For the record, for whatever reason, removing the power management driver does not remove the reg keys ...  I dont know why ... 
    Am I missing something or do I have a bad battery?

    I will . Hope that Lenovo will do as needed. Anyone know a better way to be heard by Lenovo and get an answer for this issue?

  • Power Management Driver for Windows 8.1 missing (G510)

    Hello,
    There is no lenovo power management driver for windows 8.1 listed in the support page. There is only a version for windows 8 available. I need that driver and i need to have it. My laptop is the G510. When will the new version of the software be released? It's a new laptop and it should be fully compatible. 
    Till then, will installing windows 8 version of the program cause problems?
    Thanks

    I will . Hope that Lenovo will do as needed. Anyone know a better way to be heard by Lenovo and get an answer for this issue?

  • T61 Power Management Driver for Windows 7 - where?

    I cannot find a released Power Management Driver for Windows 7 for the Thinkpad T61.
    I see a version 1.60 but it does not include Windows 7 for the T61.  And the only other one I have found is beta.
    As an aside, do I even need the Power Management Driver if I'm not going to use Power Manager?

    Right there in the T61 drivers and software dowload page:  "Support -> Download Drivers and Software -> enter T61"
    ThinkPad Power Management Driver
    README for ThinkPad Power Management Driver
    In the driver matrix, it's listed as for "ACPI Power Management" for Vista and lower - but is the same driver. The readme and download page include Win 7 if you dig a little deeper.  Maybe that's what is causing the confustion.
    [edit] Sorry, spoke too soon.  I dug a little deeper.  The readme doesn't list the T61 under WIn 7, only Vista.  OTOH, the download page for the T61 lists that driver for Win 7.  Anyone actually try it?
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Satellite P505D-S8934 mass storage controller driver for win7

    Dear Expert,
    Anyone know where can i download the Satellite P505D-S8934 mass storage controller driver for win7? please help.
    BR
    Gryloo

    Hi gryloo,
    You can download all drivers for your notebook on this page:
    http://www.csd.toshiba.com > Download
    As far as I know for Mass Storage Controller you have to install the card reader driver.
    Check this!!!

  • Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit

    Hello, I need Toshiba Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit. If you have setup file, please redirect me, if you have any other file, please explain me where to install it.

    If I were you I would take look to the Drivers Download site of the Toshiba mainpage, because there you can find everything you need.
    The mass storage controller can either be the HDD controller or the SD-card controller. I would download both of them.
    Heres a direct link to the Drivers page: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Greets

  • Bus power external drive for Intel IMac recommended?

    Getting ready to replace external hard drive.I have a 2TB now that is formatted in to 2 drives, 1 for TM and 1 for clone. Told that TM needed it's own drive and should get a second for clones and other files. I can make a bootable drive out of the external but not TM drive.
    I was looking at some bus-powered drives and not sure how IMac and TM on a bus powered drive would work. Am I able to consider these bus powered HD's - they have power supplies available? Can I depend on my Mac/TM to work well with a bus powered drive with an ac adaptor (because of there small size) or should I get a powered external hard drive for Time Machine and something smaller for my clone? Any ideas?
    Looking at OWC Mercury Elite Pro mini, GDrive mini and the CalDigit AV drive. Open to any suggestions and using FW800.
    Thanks.

    I have never trusted bus powered usb devices. I use a powered multi port hub. Not only does this supply bus power to an army of usb devices (printer, scanner, camera, hard drives, etc.), the hub can be placed close to me. No need to reach for hidden usb ports, no trying to figure out which way is up on the plug ....
    http://usb-hub-review.toptenreviews.com/
    p.s. there are many posts here about usb devices being arbitrarily disconnected from the computer for lack of power.

  • No network controller driver for Portege R500 (Windows XP)

    Hello
    I don't quite understand why Toshiba does not provide the necessary drivers to make a new Portege R500 WLAN work. I have absolutely no wireless networking capability, as if the switch was turned off, and I have a yellow question mark in the Windows Device Manager ("Other devices", "Network Controller"). Windows does not find a driver on the two restoration CDs and trying to install everything from http://aps2.toshiba-tro.de/wlan/?page=downloads doesn't help neither.
    Has anybody managed to find drivers to correct this "Network Controller" problem for an R500 under Windows XP? Maybe my unit has a hardware defect, because I can't believe that WLAN support for XP is not provided out of the box or at the very least by downloading files on the Toshiba support site
    Thank you
    Olivier

    Hello
    Reading your posting one thing is strange for me. Can you please explain to me what you mean with: Windows does not find a driver on the two restoration CDs.???
    As far as I know restoration CD/DVD is not a kind of driver collection but recovery image that you can use for clean operating system installation. Can you please tell me which restoration (recovery) CDs you have? Are both of them for one operating system or you got one for Vista and other for WXP.
    I have checked Toshiba support page and there is listed WLAN driver version 11.5.0.32 / 9.0.4.37. Download it and unzip the driver files and before you start installation check readme.txt file at first.
    By the way, for WXP installation please use Installations Instructions document and follow listed installations order.

Maybe you are looking for

  • Mail crashes at startup EVERY time

    Hi, I'm in the process of switching from entourage and mail 3 is working fine. Mail 2.1.X is not working at all. Every time it starts up, it crashes. In rare cases it'll open for about 10 seconds and then crash. Here is what I've done to troubleshoot

  • Can no longer access a network drive

    After upgrading to OS X Leopard (10.5), I can no longer access my network hard disk. I use a Linksys Network Storage Link that has a 320 GB hard disk attached to it. In Tiger, I could go to the Network icon in the Finder and connect to the disk. Now

  • Sorting by pixel length/width in Aperture 2.0

    I have a smart album for images to be submitted to a stock agency. This agency requires that the long edge of an image be a minimum of a certain number of pixels. How can I sort out the images that meet those requirements from those that need to be e

  • Anyone know why i cant install protools on my macbook pro

    i need assistance... i have the macbook pro version 10.5.2 and im trying to install mobile pre m audio box ad protools SE.  Its not working can you help?

  • How can I use other webcams?

    Can I use a diferent cam other then the one that's built in? I want to use a Logitech cam with a USB conection. Can that happen?