Power converter stopped working.

Can I use a 65 Watt converter to charge my 13in MBP? It came with a 60 Watt converter.

Yes. As long as the connector fits (2012 models use a MagSafe 2 connector, previous models used MagSafe 1), and the wattage rating is equal or greater to the original you will be ok.

Similar Messages

Power Adapter stopped working :(

I have a set of FPS2000 cambridge speakers and today the power adapter stopped working. Been looking today for a replacement but can't find one. anyone know which one will work as a replacement?
thanks

guess what i am also in this situation. i have the creative inspire 6700
its specs are 3.5 v, 5 A, 67.5 vA AC
im currently using, but its doggy 2 V DC
i have been looking on e-bay and such for ages. i really need a proper one. can anyone help? i've e-mailed customer support and they say they dont deal with this product anymore.

Miro's power button stopped working

Suddenly my phone's power button stopped working. I can't lock/unlock the phone nor turn it off :/ Tried to take a screen shot, to restart the device but nothing happened. I dropped the phone only once or twice before months, it hasn't been in touch with water and such. Now I almost can't use my phone unless when I put the phone on charger Did anyone have the same problem? What should I do?

Haven't heard of this before actually. I would recommend that you send this phone to a service center for repair. Contact your local Xperia Support for more information:http://www.sonymobile.com/global-en/support/contact-us/What are your thoughts about this forum? Let us know by doing this short survey.

Qosmio X500: power adapter stopped working for no reason

Hi,
Now i have my Qosmio X500 for a year and i like it, however i have small problems with it, and i would like to know if it can be problematic.
The first thing is that my power adapter stopped working for no reason,
So i bought a new one, but it always made some noise when the laptop was fully charged.
I know people with the same laptop and their adapter didn't make that sizzling noise, it looks like it was already defect from the begin.
Then i have one dead pixel in the middle of my screen, no problem for me.
Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...
Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
So all those problems i have annoy me, especially the last one (webcam and speakers problem), can this fit in the warranty of the laptop? I did extend the warranty for one year...
Thanks in advance.

> The first thing is that my power adapter stopped working for no reason,
> So i bought a new one, but it always made some noise when the laptop was fully charged.
I think this is AC adaptor fault maybe a broken cable or something like that I would recommend you to replace this get in contact with the dealer and ask for the new one.
> Then i have one dead pixel in the middle of my screen, no problem for me.
I found a info about such issues:
+Information on screen technology and pixel failure tolerance for LCD displays
+http://aps2.toshiba-tro.de/kb0/TSB9502LZ0000R02.htm
> Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
Maybe you should ask Toshiba notebook technicians for a check maybe some screws or the hinges are loose.
The speakers should be checked with connected headphones. If you will not notice the same crackling sound using headphones, then the issue might be related to speakers

Power Cover stops working pretty much as soon as it starts

So, as soon as I touch the screen or use an external mouse, the power cover stops working. If I only use the keyboard or touch pad it works fine. When it stops working the Event Viewer has any of a few messages but the most often one is that a device reported
inconsistent contact information. I've tried all of the remedies suggested earlier (uninstalling, rebooting, letting windows re-install it on boot up, manually installing the driver, etc, etc.) and nothing is fixing this problem. This is even after the windows
8.1 update. I just got the power cover today and it's essentially a brick.
Any ideas? This is 100% reproducible (and I live in Redmond if anyone wants to see this). While I've installed a bunch of software, most of it is windows stuff, office and visual studio and none of those are running when this happens. The mouse I'm using
is a wedge mouse, also from Microsoft and obviously the touch screen is the touch screen but there seems to be a serious issue here.
Jeff Levinson | ALM MVP
Author, "Software Testing with Visual Studio 2010"
I was wrong - it just stopped working and I didn't use the external mouse or the touch screen.

Hi,
How about your problem now? If problem persists, Please try to run this command to repair online image:
dism /online /cleanup-image /restorehealth
Make sure you run this command as administrator.
Roger Lu
TechNet Community Support

On my iPad power button stopped working

On my iPad power button stops working . Is it any software problem ?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Lms 4.2 didn't notify me when a Power supply stops working

Hi Guys
i have router 7200 , one of its power supply stops working , but lms 4.2 doesn't notify me?pls help to solve this issue
thanks
ibrahim

Ibrahim,
Is the 7200 being managed by LMS? Please confirm:
1. The device is setup to be managed by fault (reference)
2. The device credentials are correct (using the tool in Device Center)
3. That you have logging and snmp server destination = LMS server on your router.
#3 is not necessary but optional. If #1 and #2 are correct, Fault management should pick up the failure.

DNG Converter stopped working

I am using the Adobe DNG Convertor to convert my CR2 Canon RAW images to DNG files, then Photoshop Elements to save as a JPEG. I use a MAC. The Adobe DNG converter is version 4.4. (It always worked so, I never messed with it.)
When I open the DNG Converter, it no longer sees the CR2 files in my iPhoto (iMac) library.
I recently did a software upgrade on my iMac. Perhaps that messed it up.
I have 1.0.4.6 Bridge that I don't use.
If I need to upgrade, what do I upgrade? Should I uninstall the DNG first as it doesn't look like there is an upgrade...just a newer version.
Does anyone have any suggestions? Any detail would be appreciated! Thanks.

I don't understand why the DNG converter would just stop working. Did you get a newer camera? If the camera you are using is not supported by that version, that could be part of the problem. I would suggest that you download the most recent version of the DNG converter. It will be compatible with the most cameras. Also, I note that there are some compatibility options that need to be set in the newer versions that help to ensure compatibility with your other software. But you really should be using a more recent version. There are no "upgrades" to any version of the DNG converter, there are only newer versions as you have observed. It is in your best interest to always use the most recent version. It will create DNG files that are compatible with all versions of Camera Raw since version 2.4.

HT204154 My macbook with thunderbolt display without power supply stops working on battery mode, is that normal?

I use a 27" Thunderbolt display on my macbook pro. If I disconnect the power supply from the mac, the monitor stops working.
Is that normal or do I have to make some changes on the setup ?
Thanks
+GL

Greetings koningsvaren,
Welcome to the Apple Support Communities!
I understand that you connect your MacBook Pro to an external Thunderbolt display and everything works as it should while connected to power, but once power is removed from the MacBook Pro, the second display no longer functions. It sounds like you may be using this configuration with your MacBook Pro closed, otherwise known as closed-clamshell mode. In order to use a second display with your Mac portable in closed-clamshell mode, the Mac portable must be connected to power. Please refer to the attached article for more information. If this is not the case, please let me know.
How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Support
Cheers,
Joe

Touch screen and power button stopped working.

The power button has stopped working a long time and I've been using it as well. Now was the touch screen that stopped working without any crash. He was in my front pocket and then stopped working and returned after a while. It happened again for 3 days and then stopped permanently. What should I do ???

Hi Botinha,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
It is possible that this may be software on the device, you could trying to backup the handset(If Possible) and trying a software repair.
1. Download the PC Companion software from PC Companion and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
If this does not work, then follow through with Uliwoolys suggestion.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

I just dropped my iphone and the power botton stopped working and the screen went black i allready tried to connect it to the computer and nothing what can i do

my iphone fell on the floor and the power botton wont work and also the screen went black i already tried to reset it throun itunes but the phone did not connect and i dont know what to do

You can take it to Apple and get replaced as long as you pay for the replacement.
Allan

Why has EZ Vinyl/Tape converter stopped working with Itunes? I have used for several years, but now recent 11.0.4 Itunes has a problem with "Script conflict", and EZ has a brain-****. Conversion goes into Itunes Playlist-not song/artist/album listing li

What has stopped Itunes from working with EZ Vinyl/tape converter???? I get a "Scripts conflict" error, and Itunes bugs out.
I had two Geek squad people in to look at, and they can't get it to work like it had for three years. Is 11.0.4 to BLAME!!!!

I'd like to know who Marlene is....oh wait, it was a mixup.
I suspect these posts will be deleted.
It's every software company's answer to everything - upgrade to the latest version.
And for good reason, the bugs they know about get fixed, while introducing new ones. Not on purpose, of course, it just happens.

A 200 - The 3 little buttons by the power button stopped working

Win XP, SP2, 1Gb memory, nothing else special.
Those pretty little buttons have stopped firing up software. The only function seems to work is that the one next to the power button turns the machine on!
Any Ideas?
The only recent change is I upgraded Microsoft Office 2003 recently.
The buttons ARE set to fire software up.

Hi
Well, I dont know why it doesnt work but these 3 little buttons are Toshiba Controls.
Did you try to update the controls driver? You can find it on the Toshiba website under
http://eu.computers.toshiba-europe.com and Support & Downloads.
Furthermore you can check the settings. Im not sure but I think you can find them in Control Panel .
Bye

Raw converter stopped working and is missing -- running CC and Windows Vista SP 2.

I have reinstalled Photoshop twice from the cloud. RAW converter still missing. Please help.
If I try to install the 7.1 Converter download, I get a failed message saying this update is not for me. The 8.3 DNG converter installed, but the problem persists.

ACR 8.3 is what you want, that is the current version for Photoshop CC. You can check the installed ACR version in Help > About Plug-In > Camera Raw (or open the CC desktop app and see if it reports Photoshop as up to date).
You don't have any need for the DNG converter, since you have Photoshop CC and thus the very latest ACR version with all the newest camera support.
(The DNG converter is a standalone application, completely independent from Photoshop. It converts native camera files to the universal DNG format, so that they can be read by older ACR versions that don't have direct native support for that camera).
If ACR 8.3 is indeed installed, but not working as it should, or even missing, that's a different problem.

Iphone 3rd party power cords stopped working

All of a sudden my third party power adapters are no longer working. Any one know why??

The Phone is getting charged directly through USB though.

Power converter stopped working.

Similar Messages

Maybe you are looking for