Power Cords

Hi.  I have three power cord/adapters for my MacBook Pro at different locations.   What I am finding is that where the smaller cord comes out of the adapter to the computer, the wires are coming uncovered and it looks like the connection may be broken. Is there a way to repair this rather than buy another one at $79?

You mean the cable cover is frayed where it exits the power adapter? I've repaired this before, but it is difficult and I can't recommend it. Essentially it involves cracking open the power pack case with a chisel, and re-wiring further up the cable. You might try looking for discount power supplies on sale at places like Other World Computing. Due to the proprietary Magsafe connector, you need to look for genuine Apple adapters.

Similar Messages

  • Does a Laptop Warranty Cover the Power Cord?

    Hi, I bought a HP Envy Touchsmart 15 and it is still covered by warranty.   However, I cannot find any support help online such as  the support chat which I find very odd since I just used it about a month ago when my battery died!  Where did all the support go?
    Anyways, when I plug in my laptop, the LED by the power port does not come on, and my laptop will not charge or turn on at all.  My battery is dead, but I know it works becasue it is less than a month old.  Since my laptop will not run on AC power even with the battery removed, I feel the power cord is the problem.
    I would really like to know if my warranty covers the power cord, and if so how do I contact HP, since there is absolutley no information when I go to "Contact Us" besides the consumer forums.
    I am a ECE student at UT in Austin, and every day I go without a laptop is hurting my grades.  So I need help ASAP

    Hi
    Yes, power cord, adapter are covered under limited warranty. HP would replace it for you if it's faulty.
    Check warranty: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=us&lc=en
    These are what I could find to help you:
    Contact HP: http://h22207.www2.hp.com/us-en/contact-hp
    Contact HP in Texas:
    http://m.hp.com/us/en/store-finder/find.do?type=authorized&searchType=LOCALAREA&displayedAddress=787...
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    Are you in the US? Order one from here:  http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
    Or check out Best Buy.

  • After reading and resetting everything with Keyboard I still get blank white screen. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans at full speed.

    After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
    EtreCheck version: 1.9.15 (52)
    Report generated August 30, 2014 at 6:56:41 PM EDT
    Hardware Information: ?
        iMac (21.5-inch, Mid 2011) (Verified)
        iMac - model: iMac12,1
        1 2.5 GHz Intel Core i5 CPU: 4 cores
        4 GB RAM
    Video Information: ?
        AMD Radeon HD 6750M - VRAM: 512 MB
            iMac 1920 x 1080
    System Software: ?
        OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
    Disk Information: ?
        ST3120026AS disk0 : (120.03 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted>: 209.7 MB
            Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        HL-DT-STDVDRW  GA32N 
    USB Information: ?
        Apple Inc. FaceTime HD Camera (Built-in)
        CHICONY USB NetVista Full Width Keyboard
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
    Thunderbolt Information: ?
        Apple Inc. thunderbolt_bus
    Gatekeeper: ?
        Anywhere
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Launch Daemons: ?
        [loaded]    com.adobe.fpsaud.plist Support
        [running]    com.arcsoft.eservutil.plist Support
        [running]    com.bjango.istatmenusdaemon.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [running]    com.sophos.autoupdate.plist Support
        [running]    com.sophos.configuration.plist Support
        [running]    com.sophos.intercheck.plist Support
        [running]    com.sophos.notification.plist Support
        [running]    com.sophos.scan.plist Support
        [running]    com.sophos.sxld.plist Support
        [running]    com.sophos.webd.plist Support
    Launch Agents: ?
        [running]    com.arcsoft.esinter.plist Support
        [running]    com.bjango.istatmenusagent.plist Support
        [loaded]    com.nvidia.CUDASoftwareUpdate.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [running]    com.sophos.uiserver.plist Support
    User Login Items: ?
        Macs Fan Control
        Firefox
    Internet Plug-ins: ?
        FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
        Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: Java 7 Update 67 Check version
        Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins: ?
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
        CUDA Preferences  Support
        Fan Control  Support
        Flash Player  Support
        Java  Support
    Time Machine: ?
        Time Machine not configured!
    Top Processes by CPU: ?
             1%    WindowServer
             1%    fontd
             0%    firefox
             0%    SystemUIServer
             0%    SophosWebIntelligence
    Top Processes by Memory: ?
        229 MB    firefox
        156 MB    SophosScanD
        152 MB    InterCheck
        131 MB    com.apple.IconServicesAgent
        115 MB    SophosAntiVirus
    Virtual Memory Information: ?
        424 MB    Free RAM
        1.53 GB    Active RAM
        1.37 GB    Inactive RAM
        699 MB    Wired RAM
        1.26 GB    Page-ins
        0 B    Page-outs

    I'd start by getting rid of the following software responsible for these extensions.
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
        1. AppZapper
        2. AppDelete
        3. Automaton
        4. Hazel
        5. AppCleaner
        6. CleanApp
        7. iTrash
        8. Amnesia
        9. Uninstaller
      10. Spring Cleaning
    For more information visit The XLab FAQs and read the FAQ on removing software.
    Be sure to remove your two Login Items. Finally do this:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • HT201897 Does a Mac Mini purchased in the USA require a power converter for operation in Europe or should I only purchase a different power cord for it?

    Does a Mac Mini purchased in the USA require a power converter to operate outside of the USA or can I simply purchase a different power cord for it?

    Depending on which European country (should their mains access plug/port shape vary) the
    cord set with correct ends on it has to match. You can buy a cord that plugs into the Mini
    where the factory cord goes, and the other end has one for the wall source shape. The wire
    for the application should be able to support 110~240VAC.
    With the cord or an accurate image in hand, you could either get a new cable to match both
    realities (mini + wall supply mains local) or an adapter (US/Standard to EU/Local) for just
    the head or input part of the original Apple cable. One plugs into the other, then into wall.
    If you have a new Mini with a small modular plug/port on the computer end of the power wire,
    it would have only two holes and no ground; the other end would have two prongs of equal
    shape and size. Not a polarized plug and not a grounded three-prong. To get a replacement
    power wire for the MINI to go from power source to the Mini is recommended, if you are going
    to be staying in one location for awhile. A Travel Kit that offers no electrical conversion but only
    the physical shape adapter kit, should a available in travel stores, airports; big box discount
    stores, computer and electronic stores. This page shows the cord end of the appliance shapes.
    The other end would be the mains shape for whichever country you are going to....
    http://www.signalandpower.com/European-Power-Cords/
    So to match the country or regional power mains type is a primary concern for obtaining the
    correct replacement cord to supply the Mini with local mains power. The end which plugs into
    the Mini is of a certain type (numbers for EU and elsewhere are published, see link + images)
    & the end that gets plugged into the mains or utility side, needs to match the local specification.
    The link to Apple, to contact for Support and Service information in prior post, should be able
    to help find a source for the local replacement type cord they'd sell local people with a Mini.
    Apple local sources offer replacements for this purpose; and for travelers, a second cord for
    a direct use (not adapter plugs) is a better bet. For those who only need a cord in two places.
    If you are traveling to Denmark, UK, Swiss or other EU countries require different adapters.
    Even places where the power itself may be somewhat similar. However your MINI has an
    automatic power supply that will conform to that energy standard, you only need to supply a
    correct non-transforming adapter. Simply a connection to adapt one shape to another.
    The general purpose travel kit that is not specialized to Apple power adapters, would have a
    plastic plug/adapter with the local pins on one side, and the US/standard two slots on the other.
    So, no circuitry nor any other change of electrical power inside this device would be required.
    http://www.signalandpower.com/2-Prong-Plug-Adapters/
    http://www.signalandpower.com/Convert-to-Europe-CEE-716-plug/
    http://www.signalandpower.com/Swiss-AC-Power-Cords/
    In other words, I believe my other post already covered this. On the ground on either end of the
    path, adapters are common and the Mini does not use proprietary electrical components IF you
    have one of the more recent shape aluminum models with the power supply built in. The older
    Mini has the power brick and two wires. A US/Standard plug adapter to EU/Local would work in
    either case, since all you'd do is plug the adapter plug into the local mains and the US plug into
    that one... I see these kinds of discards for as little as 25¢ in thrift stores in Alaska. Or you can
    buy a new one. Or you could get a complete cord with correct ends on it, for Mini + local mains.
    Hopefully this helps somewhat. The only info missing is which EU country or region is involved.
    Their shapes of plug are different, so the adapter end for local supply has to match their standard.
    Swiss, Denmark, UK, and others offer different shapes and so on.
    The Apple store in the location you are traveling should be able to supply you with a replacement
    cable for a modern MINI, that has the correct local mains end, and the correct Apple mini end on
    the opposite. Since the unit is automatically switching, the magic is done.
    Since I supplied a means to locate any number of Apple stores, authorized service providers &
    other Apple related vendors in my earlier reply: https://locate.apple.com/country you could contact
    any of them along your route in the City in whichever EU country, to find a local MINI power cable.
    In any event, I'm done...
    Good luck and happy trails...

  • Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker,

    Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker, & phone only).  Was this former-feature now an oversight??  I'd really appreciate having my Bluetooth once again listed as a choice of  audio option.  Especially considering the battery life is not what it was prior to this update, and requires recharging often.

    Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

  • My Macbook pro keeps shutting down right after I log in. The power cord seems to be fine, so I think the computer has enough power. Right after logging in, it shows a grey background with a loading bar that loads only 1/4. Then it shuts down.

    I have had my Macbook Pro since 2011 and it has been great until now. Suddenly, I can no longer get past the grey screen just after I log in. The grey screen appears with a loading bar, and the bar get 1/4 of the way complete, then the computer shuts off. My power cord seems to be working fine because this problem still occurred after using another power cord (from another Macbook). Keyboard does not light up, and the small green lights on the left side of the computer do not light up (this is an older version and these light indicate how charged the computer is). It is using the OS X Yosemite and recently had total clearing of the hard drive as it was transferring from one owner to another, so the hard drive isn't nearly full enough to be causing this problem. I've never run into this problem before with other Macbooks.
    Help!

    Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column  two drives plus possibly  a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install.   http://support.apple.com/kb/PH18869?viewlocale=en_US  

  • My power cord is broken, can i get a new one if im covered with the apple care protection plan?

    does anybody know if i can get a new power cord if im covered with the apple care?

    Depends on how it got damaged. have a look at this thread:
    https://discussions.apple.com/message/2630756#2630756

  • HT201210 ive tried all of this many times now and it went through a restore once but my iPod still said i needed to hook up to iTunes (you know the screen showing a power cord and the iTunes icon) ive tried and tried but still can't get it PLEASE HELP ASA

    I've have done all of the tips Apple has suggested and have tried many times to restore it but it still won't work.  IThe first time it went through the whole process and it seemed like it worked but it still showed the Screen that has a iPod power cord that has an arrow pointing to the iTunes thumbnail.  And now i thought well maybe it is restored i just need to sync it to Itunes but no my computer said that i encountered a problem my iPod and that i need to restore it so I tried.  And at the end of the first step, the Verifying Software step, it said that the device "iPod" could not be found, so Itried it again and again but it still came up with the same results so I'm screwed so if you can could you please help me i really need after a disabled iPod for about 2 to 3 months now.  So if you could please help i would appreciate it alot. THANK YOU.

    - Reboot the computer, try another USB port and try anohter cable.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Try placing the iPod in DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

    I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
    <E-mail Edited by Host>

    Hi John,
    That's often a sign of a bsad Capacitor in the Power Supply, but...
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 

  • Someone changed my passcode! How do I reset my phone without a power cord or iTunes?

    Well earlier this week, my iPhone 5c was stolen. but I got it back from the school's office. I had a passcode sent on it before so i simply entered that passcode into the phone but it wouldn't let me in at all. Now i guess you can say that the person who took my phone bypassed the passcode and changed it. I was wondering how do you reset the phone without a power cord or iTunes?

    Unfortunately, you can't.  You will need to access the computer you sync with and use iTunes.  This link will provide help:
    iOS: Forgot passcode or device disabled

  • My MacBook Pro 13'' shuts down randomly while connected to the power cord.

       Alright, so my Mac is shutting down while being connected to the power cord. Though, when I unplugged it, it runs just fine.
    I've read up on the other random shut downs but they seem to be different in my case. I was only surfing youtuve on Firefox, granted I had a few other tabs open but they weren't doing anything that would run the computer hot, and it shut down out of no where. The battery was full and it was still connected to my power cable. The screen went blank and the computer was completely off. I noticed that the light on the plug in wasn't on and switch the outlet that the computer was plugged into and replugged it into my computer. The light came on and after about three or so times of pressing the power on button it came back to life. Though, it stayed on the start up, white apple page and just spun. After a while it looked as if it was about to go to my password page but it shut down after gently moving the computer. The power cable light went off once again. I unplugged it and replugged it into my computer but the light would not come back on. After just removing the cord and pushing the button a few times my computer came back to life and I logged in as normal except for the fact that after it came back on the date and time was reset and several applications needed permissions. It also randomly logged me out of my Facetime account as well.
    All in all I was wondering if anyone else had a similar problem and know what's going on or if this is new. Could it be some kind of spark in the power cable from a broken wire that made my computer shut down or is it something attacking my computer?

    Please make a Genius Appointment and take it in for service.

  • How to get a new power cord? (iPod warranty)

    I need a new power cord, thanks for your help!

    If the power cord is damaged and you didn't cause the issue, the warranty covers it. Simply take the iPod and the power cord to an Apple Store to get another power cord for free, making an appointment at the Genius Bar > http://www.apple.com/retail
    You can also contact with Apple by phone > http://support.apple.com/kb/HE57

  • Macbook Pro: both external screens go off when unplugging power cord

    Hello!
    I have my Macbook Pro set up with two external screens one connected thru HDMI and the other with Thunderbolt, I keep the lid always closed. I always have the power cord plugged in but when I for whatever reason unplug the cord both screens go dark and don't seem to "wake up" anymore. When I plug back in the cord I have to open the lid first to make the login window appear but after login my screens are switched. When I close the lid again it goes back to my original set up. The same when I turn on the Macbook and don't close the lid after it right away, the screens are switched until I close it.
    Any idea on this?

    As this article points out, there are very stringent requirements for using a MacBook in "closed clamshell" mode. #1 is to have the power adapter plugged in:
    How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Suppor…

  • HT4061 I am on my computer, last night I entered a Itunes gift card, trying to sinc with phone and phone is stuck on iTunes blue music symbol with arrow and power cord picture on phone.  I tried to turn the phone off and backf on and its still there.Phone

    Help Somebody!  My phone is stuck because I tried to sync my computer music with my Iphone and now all my Iphone does is show a pic of the power cord with an arrow going up to the word Itunes with the blue circle and the Music symbol in it!  I cant even use my phone! Ugh, so frustrated!  I entered a gift card and downloaded 2 songs and now what was going to take 2 min and cost $2.00 has now cost me hours in time and frustration.  Anyone know the techno how this works? I know its more simple than it is for me.... I just don't have the tech stuff down. Kids get this stuff better than me...

    Hi mikevickie,
    Thanks for visiting Apple Support Communities.
    If you only see the "connect to iTunes" screen on your iPhone, the steps in this article can help:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Best,
    Jeremy

  • I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

    I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

    Hi there Rlong50,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

Maybe you are looking for

  • Help, I'm stuck in Freehand, and can't get out!

    I have created a masterpiece :-) brochure cover, with a logo over a graphic, with shadow, and gradient fills. It's not a complex file, and my overseas client wants it for use with Illustrator. However, I can't find a way to get it out and back in to

  • PROBLEMS WITH VIDEORA CONVERTER

    hello. i went and downloaded a dvd encrypter and the videora ipod converter. the video itself has been converted, AND in itunes but when i try to drag it to my ipod it says it could not go in my ipod cause my ipod will not play it. please help!!!

  • Zipping folder keep getting permission error even though I have permission

    I am trying to zip a folder containing a few hundred items.  every time I try I get this error.  I have administrative access and permission, transferred this to the files inside, tried to copy it to an other disk and still I get this error.  Any ide

  • Which CPU should I buy to support hardware virtualisation

    I would like to buy a cpu/motherboard bundle , but I want it to definately support "hardware virtualisation" . Am having great difficulty in find clear and easy to read info as to which CPU does or does not support hardware virtualisation. are there

  • Book for reports and forms

    Could any suggest a very good book for Oracle reports and forms which has all the details of the reports and forms from the fundamentals?