Power-down dual monitor setup with one button?

Wondering if it is at all possible to hook up the monitors so I only have to switch off one monitor to switch them both off?
As well designed as Mac products generally are, placing the soft touch buttons on the side of the monitor is useless in a dual setup.
Cheers in advance.

I don't do it in hardware; I use the freeware SleepDisplay. I invoke it through Spotlight:
spotlight shortcut"sle"Cmd-Return does it in 2 seconds
For Tiger
For Leopard

Similar Messages

Dual monitor setup with seperate resolutions

hey guys!
i currentley run thye latest version of archlinux with the cinnamon desktop environment and an nvidia geforce 7300SE graphics card.
im running a dual monitor setup with one 27" 1920x1080 monitor and one 27" 1024X768 monitor
because they have the same physical size they line up perfectley but because the resolution is different programs/mouse cursor movement doesnt, is there any way (without changing the resolutions) to compensate this effect so that in the eyes of linux/cinnamon the monitors line up so that for example dragging a window goes seamlessley between the 2 monitors.
i HAVE found out the panning option in the nvidia x server settings, but that really isnt what i am looking for...
Last edited by RikSolo (2014-08-04 11:25:02)

A magnifier following the window down to the pixel, zooming to the exact size of 540 pixels the 384 pixels window could create an illusion of just that. It would be highly impractical however, not mention all the hacking time. Even if you would manage to get two screen with different sized icons, so that they match visually, the windows and fonts resizing on the fly, wmctrl might help with windows alone, no their themes (buttons, borders thickness etc.), you would still be left with a visually differently sized mouse cursor. Technically such a feat should be possible, but who is going to code it? Nvidia?
Last edited by emeres (2014-08-04 18:48:59)

Does LR handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?

Does LR 5 handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?
I'm planing to buy a 27" 16:9 monitor and use it as primary together with a 22" 16:10. Does any have any idea?
Thanks

Moreover, the two monitors can have completely different characteristics. As always, you really need to calibrate/profile any monitor (with a hardware tool - Spyder, Colormunki etc). That's no more important with two monitors, but you see for sure if you don't, as two dissimilar monitors will then probably look different.

Is a dual monitor setup with 2graphic cards possible?

HI.
What i want to do is run Archlinux on my Desktop but i dont want to miss my second monitor.
I could use both monitor on my nvidia graphiccard but i want to use the energy saving features too (wich dont work with 2monitor on one card) therefore my windows setup is big monitor on nvidia and the smaller one on the intel onboard card.
They both get recognized by lspci but only the onboard cards isy being used (the onboard card is the first card on windows too).
So is it possible to get it to work? Id really want to use ARchlinux on my Desktop too but i dont want to use it with one screen or without energy saving?
Working compositing is a must, i want to use gnome3 wich is the only reason to swich to linux for the Desktop (arch is running on the laptop for ages^^) but i dont need to, Win7 is working flawlessly fine and i didnt have to pay for it (msdnaa).
Thanks in advance!

hy do you need to clock down your card?
Most gpu have a function that clocks down the card@idle and or desktop.
In my case thats down from 850mhz(560ti)to 200mhz while using windows and 50mhz if the gpu load is low.
Thats about 20watts less then with full clock.
The problem is, that the gpu wont clock down with 2monitors on it, it stays at 850mhz.
Theres some driver tweaks for amd cards wich "fix" thatfix this (i believe its intentionl, 2monitors equals more load but its no problem with new cards...
Thats one reason i use my onboard gpu for the second monitor, it works well with windows and also means that swiching off fullscreen (games) to the desktop works a lot better, the second monitor can play a movie while playing wich doesnt work with one gpu and fullscreen.
I really dont need that with Linux since i use it for work and multimedia only but the energy saving feature is nice if the pc is on 8hours and more wich is often the case.
Can you tell which one do you run? I'm going to buy one for dual-monitor setup, and I'm looking for something that will work for shure.
As said dual monitor on one gpu works, amd can do 3monitors while nvidia can do 2 at once, that means if u intend to use 3monitors some day with ur card u have to buy an amd card.
i took the nvidia because is can use it to render videos with cuda support (its not working with all tools yet but its getting better and if it works its a lot faster then my cpu rendering).
PS: Thats one hread about the power saviing with 2monitors:http://forums.nvidia.com/index.php?showtopic=197557
since my monitors dont share the same resolution it seems that theres no way to make it work .
Last edited by halfzware (2011-05-12 21:17:41)

How do I get my Macbook Pro 15" to run dual monitor setup with Dual Link DVI outputs

I own have two 27" 2560x1440 WQHD LED IPS Computer monitors and have been trying to get them to work with my macbook pro 15" w retina for over a month now. I have purchased multiple products and nothing has worked. The big problem is that the only input that the monitors have is a Dual Link DVI input. The closest that i have gotten to getting them to work was this morning when I bought 2 Mini Display Port to Dual Link DVI Adapters for $99 a peice. Below is a link
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?afid=p219%7CGOUS&cid=AOS-US-KWG-PLA
Problem is that when I hook them up, I still only get a picture on one of the screens. Also, it requires you to plug into a mini Display port and USB port which takes up all of the space for me to run any othe peripherals. Though it has a built in USB port, when I plug my apple keybaord into it, I get an saying "USB Device Needs power, connect "keyboard Hub" to power or usb port on this mac"
I have looked everywhere for a docking station that would satisfy my needs, however, it does not exist. I use my macbook as my main office computer and take it home with me every night. I switched from the lenovo thinkpad to the macbook and have been satsified with my decision except for the fact that i cannot connect my monitors to it.
Please help!

Yes, that would work, however it would cost me $2000 for the monitors.

Dual monitor setup with Docking station and W500 on windows 8

Hi there
I have a w500 with ATI Radeon 3650
Trying hard to have it set up with windows 8 and two monitors with my docking station. It worked with XP, Vista, W7...but no go now.
Any solutions out there? I don't care about catalyst control center, or which drivers I have to use, just give me back my two monitors connected to a docking station

I have the same W500 setup and have had no luck finding Windows 8 drivers on Lenovo's site or AMD's. I have a support ticket in to Lenovo to see what they come up with. I have two flat panel monitors that I need to work. According to MS, Catalyst Control Center has compatibility issues with Win8. It was easy to set up both monitors under Win7 with CCC. I have not been able to set them up using Windows display setting in Control Panel. Does anyone out there know of an app that I can use to replace CCC and run two monitors?
kb5

In Dual Monitor setup, with Thunderbird not in main monitor, the some dialogs always shows in other monitor

I have a three monitor set up. I have Thunderbird running in the right monitor. My main monitor is the middle one. Dialogs, such as Spell check, Activity Monitor always show up in the main window (not the one with Thunderbird) in the upper left hand corner.
It happens on Windows Vista and Windows 7 Professional.
I have Thunderbird version 24.3.0

Some dialogs when moved, stay moved. Others do not. The ones that frustrate me are those that are Centered and therefore show up split across my two monitors.

Dual monitor setup flashes constantly

I am trying to set up a dual monitor setup with a Lenovo Thinkcentre Edge computer. I reset the BIOS to enable multimonitor support and IGD Active Video. One monitor is plugged into the VGA port. But when I plug the second monitor into the DVI-D port, both monitors flash constantly and the speakers make the sound of a device being disconnected. Unplugging the DVI-D monitor stops the problem on the VGA monitor. I checked the drivers and they are all up to date. Any ideas?

Bad cable?
Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

Dual Monitor setup for Mac Mini???

I just bought a VGA Y-cable and split my monitor signal to two monitors. Unfortunatley the same thing is displayed on both screens where as I was looking for an extension to my desktop.
I found this http://www.national-tech.com/catalog/dvisplitter.htm (the top one for $ 146)
I was wondering if I split the signal with a dvi splitter rather than a vga splitter if i could have a dual monitor setup with more screen space...
Thanks,
Paulie
Mac Mini Mac OS X (10.3.9)

This will do it for you: http://shopmatrox.com/usa/products/datasheet.asp?ID=788
ibook g4, mac mini core solo, powermac g4 gigabit ethernet Mac OS X (10.4.5)

Separate workspaces on dual monitor setup?

Sorry if I leave out any details -- just ask if you need anymore.
A little background information before I begin: I am using 3.12-ck x86_64 kernel, using Cinnamon, and have a dual monitor setup via one graphics card, which is an NVIDIA 560 Ti, and I'm using nvidia-ck-bulldozer
I'm trying to have each monitor have its own Workspace instead of just being one large desktop, but I'm not exactly sure how. The only solution I've found so far is:
1) Right click the panels on Monitor #1 and choose "New Panel" -- (This is where my problem lies; there is no "New Panel" option)
2) Then hold Alt and click and drag the new panel to Monitor #2 -- (I also cannot even move my current panel from monitor via clicking + key combos; I have to change the primary monitor in Cinnamon System Settings)
But, as I said, this solution doesn't work for me. What exactly should I do?
Edit:
Forgot to mention, I'm using Cinnamon version 2.0.14
Last edited by DealerNextDoor (2013-12-25 06:39:25)

I am using the same version as you right now, but I couldn't find out what you are searching for. I think this is because this feature doesn't exist yet. See https://github.com/linuxmint/Cinnamon/issues/130

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

I have a dual monitor setup. When I paste develop settings from one image to another, Lightroom switches the active window.

Strange problem. Lightroom 5.5. Windows 8.1. Dual monitor setup.
I'm processing a large batch of photos. I have Monitor #1 set as my main develop window, with Monitor #2 set only to display a larger version of the image I'm working with. If I copy the develop settings off of one image and try to paste them onto another image, Lightroom will switch from Monitor #1 to Monitor #2 as the main develop window, and will not display anything on Monitor #1.
If I then try to paste develop settings onto another image on Monitor #2, LR will then display a larger version of the image I'm working with on Monitor #1.
To work the way I want to, I have to continually drag my develop window back to Monitor #1 every time I try to paste develop settings onto a new image. How can I make this stop?

I just tried what I think you’re saying you’re doing and I don’t have the problem with LR 5.5 on Windows 7 SP 2.
Does the same thing happen whether you use the key shortcuts vs the Settings / Copy/Paste options on the menu?
I ask this because if you’re using the keyboard shortcuts, maybe you have some display-manager program that has bound itself to the Ctrl-Shift-V (paste settings) to the function of move-to-other-monitor which would do at least part of what you describe.
You can also test this theory by doing a Ctrl-Shift-V with an application other than LR as the active window and see if it moves. I suppose Ctrl-Shift-C might also play into it so try both of these hot-key combinations with a program that isn’t LR.
If none of this sheds any light on the situation, then give a more detailed description of the low-level functions you’re doing to accomplish the copy-paste of settings, so someone else could replicate the steps exactly.
Specific detailed steps, like:
left-click on source photo’s thumbnail in the filmstrip
press Ctrl-Shift-C to copy the settings
click Check-None
enable the white-balance and calibration checkboxes
click Ok
left-click on destination photo's thumbnail in the filmstrip
click on Settings / Paste Settings in LR’s menus to paste the settings to the selected photo

MSI N560GTX-Ti Hawk PerfCap with Dual Monitor setup

Hi guys,
as far as I'm concerned, there shouldn't be a PerfCap when running a setup with two monitors on extend desktop setting, am I right? However, my GTX560-Ti does PerfCap and sometimes even does this while gaming (which is incredibly annoying). The only way to get it to clock up again is to reboot my PC.
My question is, why is that and how can I get rid of this behavior? I already tried updating the VBIOS but it didn't help.
Thanks in advance
Monsterkater

I'm sorry, I thought "PerfCap" would be a known term.
As the title states, it's a MSI N560GTX-Ti Hawk. The Card is clocking down, GPU-Z reports "PerfCap Reason: Util" which is, according to Google Search, because it isn't challenged enough. However, when running a dual monitor setup it should (again according to Google Search) always run at the default speeds (950/1050/1900 Core/Memory/Shader). I have updated my signature to show my system details as listed in the Posting Guide.
The temperatures under load are okay, the highest I have seen was 76°C GPU, 74°C Memory and 69°C VRM (all of them measured with MSI Afterburner). I have tried several drivers including Beta drivers and always checked "perform a clean installation". I also tried updating the VBIOS. I didn't know what else to try because Google Search doesn't yield much results for this.

Dual monitor setup - need laptop on the left

Hi All
I'm running a dual monitor setup - specifically a HP G72 laptop and a widescreen monitor. I use the monitor as the default and sometimes I want to use the Laptop as a secondary screen for watching TV etc. My desktop is Enlightenment, I just changed to it from Gnome. My issue is that I want the laptop to be on the left of the monitor - that's how it is physically positioned - but when I switch the Laptop screen on all my applications shift over to the laptop screen. I've written 2 scripts, attached to hotkeys, one to turn the laptop off and the other to turn the laptop on. The script to turn the laptop on is as follows:
xrandr --output LVDS1 --mode 1600x900 --pos 1600x0 --rotate normal
--output VGA1 --primary --mode 1920x1080 --pos 0x0 --rotate normal --left-of LVDS1
This works fine, applications stay where they should be, except that the physical position is incorrect; VGA1 should be to the right of LVDS1 like this:
xrandr --output LVDS1 --mode 1600x900 --pos 1600x0 --rotate normal
--output VGA1 --primary --mode 1920x1080 --pos 0x0 --rotate normal --right-of LVDS1
However, when I use the second script all of the applications shift to the laptop but at least the physical position is correct. The issue appears to be something to do with laptops, almost as though when it's a laptop the default monitor is forced to be on the left. Has anybody got any suggestions how to get around this issue?
Thanks
Richard

This is due to your window manager treating the two monitors as a larger 'desktop' area - that combined with your specification of the pos=0x0 you are telling it to do this.
If you have only the VGA output on, the top left corner of the VGA monitor is 0x0. If you open a window, and it is placed 10 pixels in and down from the top left, it is at coordinates 10x10 in the x session. Then you turn on the laptop monitor and specify that the top left corner of the laptop monitor should now bo considered 0x0 - but nothing is done to move the windows, so the window with coordinates 10x10 is now near the top left of the laptop monitor.
I see 3 possible ways of acheiving what you want:
1) swap the "pos" parameters in your xrandr commands so that the monitor on the left is always at 0x0 and the one on the right is always at 1920x0 (or whatever). This will leave a large area of available X desktop that is not visible - I don't know how your window manager will treat this. It might try to map windows on the laptop screen space even though that screen is not on. I know openbox is easy to configure where it tries to place windows.
2) Keep the VGA monitor always at 0x0, but place the laptop monitor at a negative offset when you want it on. I don't actually know if X allows negative coordinates like that, but it's worth a shot.
3) Configure your window manager, or use a different window manager, so that it is aware of the two screens and treats them reasonably (e.g. moves windows when the desktop area is changed).
Last edited by Trilby (2014-07-12 12:15:42)

Dual monitor setup without using the ADC?

Would it be possible to run a dual monitor setup using a DVI splitter cable from my (2009)Mac Pro?
I've seen some old forums referring to the 2006 models saying that this wouldn't work and instead you'd get the same image on both screens but the newer Mac Pros state they have "Dual-Link DVI ports".
Just wondering whether this means what I think it means and you can connect two monitors via a dual link cable and get essentially, two monitors running independently as opposed to the same thing on both??
Hope it's staightforward and me just being slow.

The GT120 features one Dual Link DVI-I port and one Mini DisplayPort .
The DVI-I is Dual Link capable, and also can be directly adapted to VGA.
Single-Link DVI is a serial interface that carries three data bits in each signaling interval, as well as control signals. In general, Single-Link supports displays up to 1920 wide. Dual Link DVI is the same except that it carries six data bits in each signaling interval, supporting displays over 1920 wide.
DVI screen drawing is very similar to VGA screen drawing, and the data sent are digital "scan lines" left-to-right row data, top-to-bottom with entire screen data sent about every 60 Hertz. Analog VGA signals are sent at the same time on a separate set of pins.
DisplayPort and its Mini variant are inherently a packet interface, but can be coerced to produce a "Dual Mode" signal that approximates Single-Link DVI. Getting Dual-Link DVI or VGA from DisplayPort interface requires a non-trivial converter than contains chips and requires power.
Executive Summary:
If you have one display that is wider than 1920 or VGA, attach to the DVI-I connector with an appropriate cable.
Running a Mini DisplayPort display from the Mini DisplayPort requires only a cable.
Single-Link DVI can be had from the Mini DisplayPort with a cheap adapter.
Dual-Link DVI or VGA requires an expensive Active Powered converter which can cost US$100.

Power-down dual monitor setup with one button?

Similar Messages

Maybe you are looking for