Power DVD 3.0 or MSI DVD in XP?

Power DVD 3.0 or MSI DVD in XP?
Wich is the best dvd program for win xp?

MSI dvd works fine with XP, but may be you may consider use nvDVD (the nVIDIA player). Take a look at this thread:
http://www.msi.com.tw/program/service/forum/index.php?threadid=1147&boardid=9&styleid=1.
My opinion:
-nvDVD: gold medal
-PowerDVD4 XP+patches+any dvd tweaker, silver medal
-MSI DVD player (WinDVD), bronze medal, or maybe no medal....

Similar Messages

DVD from Elements 3.0 has no audio on Cyberlink Power DVD

I've burnt a DVD from Elements 3.0 which seems to go okay but when I put the DVD back in to the drive and open Cyberlink Power DVD, it plays without audio.
What's the griff with that?
Chummy

As a test of what Steve wrote, go back to PE, and Burn to Folder. Point CyberLink Power DVD to that folder and play from there. Do you get Audio?
I'm with Steve in that PE does a good, DVD-spec AC3 Audio file, that *should* play fine. CyberLink Power DVD is a good software player.
If you are not getting Audio, first place I'd check was the Audio setup on my system and then Ctrl-c from within Power DVD. What are the settings under the Audio tab there?
Good luck,
Hunt

Looking for a DVD Player with same functionality as CyberPro Power DVD

I have just converted from PC to Mac, and love it, but have a special requirement and need some guidance.
I work in TV and need to be able to preview footage shot on site that has been converted onto a DVD. On my old PC using Power DVD, after hitting 'Play' I can fast forward and fast reverse, and increase the speed of FF or FR in small increments (up to 32 times normal speed) using the scroll wheel on my mouse. That gives me a lot of control as I search through countless hours of footage to shot list, and saves heaps of time.
With the standard Mac DVD Player, I can hold down the FF and FR buttons to get a slight increase in speed, but it is still far too slow and clumsy for what I need.
VLC was recommended, but when I hold down the FF and FR it scrolls in minutes, whereas I need to scroll in frames.
Does anybody know of a high quality DVD Player with the scrolling features similar to Power DVD that I can purchase?

Have you tried, +DVD Player>Controls>Scan Rate+ ?

Media Player and Power DVD will not pay or recognize discs

I am having a problem with Windows Media Player recognizing blu ray discs and when I try to play them in Power DVD it tells me that the product is protected I am not sure why this is because I have never had this problem before. Is there a way to fix it????
HP Pavilion DV7-3079wm
Windows 7 64 bit

JimiLee wrote:
I am in Region 1 I am able to play DVD's without any problems the movies play just fine in the playstation 3 and the blu ray player that we have
Hi,
There is no region 1 for BD's. You have not answered other questions.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 8.1 will not play any video in Video app, windows media player, Power DVD, or Picture

I just downloaded 8.1 and Windows will not play any of my videos. Power DVD will play the videos, but there is no sound. I downloaded a video from xbox video and that will not play on my computer either. I have a lenovo yoga ultrabook. I get error codes
0xc00d11d1 (0x8007007e) from Video and 20120820_082429 - Copy.mp4 in Pictures.

Hi,
According to your description, it looks like you encountered a Graphic driver problem. Have you tried to reinstall Graphic driver for test? If not, please have a try.
If possible, also reinstall the sound card driver.
If problem persists, You can try to use System File Checker tool to fix your problem. Please refer to the following link for detailed operation.
http://support.microsoft.com/kb/929833
Roger Lu
TechNet Community Support

Cyberlink power dvd not playing movies

My cyberlink power dvd will not play movie disk. My computer is HP2000 2b16nr notebook pc. thank you!

Hi scarlettclayton,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding your Cyberlink Power DVD will not play a movie. I will be happy to help you with that but I will need more information then what you provided. Is this a DVD or a Blu-Ray? Are you getting an error message at all? What operating system are you using?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Every time I want to download an app From AppStore when I start downloading it after I write my password there is warning that says to me that it isn't possible right now to download power DVD mobile even now were this app is deleted from my ipad

Every time I want to download an app From AppStore when I start downloading it after I write my password there is warning that says to me that it isn't possible right now to download power DVD mobile even now were this app is deleted from my ipad

The power DVD app is active, and seems to download ok. You have already deleted the app?
I suspect what is happeneing is that a download is in your queue, and is blocking the queue until it completes, thus the message every time you try to do a down load. It may be failing because while it thinks you have the app, it is not finding it, and doesn't know what to do. ( sounds like a poorly designed download).
I think the way around this might be for you to resync with your iTunes, and let it reload the app onto your pad. Let it complete the download. Then, if you do not want the app, delete it again from your pad, and if you never want it, from I tunes as well.
The next time they do an update, you may wind up in the same situation, so if it happens again, until they fix the download routine, you will get stuck again.
So try the suggestion, and see if this clears it out.
The other option would be to open your account in I tunes on your computer, let it complete the download there.

Audigy 2 ZS and Power DVD 5 Surround Sound Questi

I am a bit new to home computing so any help would be appreciated. I am using an Audigy 2 ZS with Creative 7. speakers. I have connected the "spdif" cable from my Audigy 2 ZS to my DVD Rom player.My question is this - when using my Cyberlink Power DVD player,if I select the audio option to use my "spdif" will I get all the surround sound options(dts,dolby digital 5. etc.) to work even though it says that my current version of Power DVD(version 5)does not support all these sound options.Does the spdif connection to my Audigy card mean that it will decode all the various surround sound options regardless of what my DVD player can decode.

I?d recommend you to upgrade to WINDVD 6 or PowerDVD 6 (WinDVD is better). but if u can't...
If u want to use 7. channel audio with PowerDVD 5,these are the things u need configured:
) Speaker Settings Panel: 7. speaker option selected.
Digital Output Only disabled.
2) Explorer --> Control Panel --> Audio HQ --> Device Controls --> Decoder --> Settings --> Enable Dolby Digital EX and Enable DTS-ES Matrix 6.
3) PowerDVD 5 --> In the Speaker settings select the SPDIF Output option. (In this case, the software player sends the digital signal through spdif to the soundboard and since the soundboard has Dolby EX and DTS-ES built-in decoding).
This SPDIF option doesn?t mean that u get ONLY spdif output (although u get it) but that the signal is processed by whatever "thing" (software or hardware) is receiving it, instead of being processed by PowerDVD.
Hope this helps you.
The Magnificent Wonderbra.

No power DVD icon in my laptop (Lenovo G410)

Dear,
During the collection of my laptop after technical service recently, I told the staff-in-charge that the desktop is still short of Power DVD icon. There was such an icon before the service. He told me to download from the following link:
https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Lenovo-PowerDVD-10/td-p/1089661
PowerDVD 10 BD,
When I downloaded & extracted the file, it showed "This software can only be installed on a Lenovo system". Installation was unsuccessful. I think that could be due to a different model and series.
Mine is Lenovo G410 (model 20237). Where could I download the power DVD that is suitable for my laptop & display it on my desktop? Please provide a suitable link.
Thank you for your assistance.
Solved!
Go to Solution.

I downloaded the free VLC player which is able to play the DVD in my laptop. Earlier on, when I searched for Cyberlink Power DVD from Windows Store, a price $14.99 (free trial available) was displayed in the website. I think it is only free during the trial period.
1. The link with a price - http://apps.microsoft.com/windows/en-us/app/cyberlink-power-media-player/e1dd130e-d240-4c57-947c-080...
2. Free version (below) -
http://apps.microsoft.com/windows/en-us/app/cyberlink-power-media-player/7c1eafcc-2795-4ed2-a06d-d45...
Thank you so much for your assistance.

Power DVD not playing DVD

I was able to play a particular DVD on Monday - I just inserted the DVD disk and it played it. Today I insert the disk, and Power DVD 12 opens, but it doesn't do anything!
What am I doing wrong?
I am on a brand new Toshiba laptop with Windows 8.1
I'm not in love with Windows 8.1 yet!

Nevermind - I restarted my laptop (for the first time in over 2 days) and it worked fine!

Power dvd included not running- need mod help ple

when i first installed my xfi, power dvd installed but didn't seem to do so properly. all i see in start menu under creative labs-soundblaster xfi-
is 'get powerdvd' with the generic windows icon for an unrecognized app
when i click this i get:
"to play dvd, please upgrade your version of powerdvd player from cyberlink. would you like to check for an available upgrade now?"
when i click yes powerdvd crashes
i deleted the cyberlink powerdvd from add remove programs and rebooted, then
found the 'getpowerdvd' under the repair option, so i reinstalled. still having it crash though everytime i answer yes to its prompt to upgrade my version of powerdvd player.
to clarify- is it a trial version only of powerdvd that's included with the xfi? the xfi box implies it is the full version.
jason or any other mod- could you please pm me with a link i can use to download the full version or at least a working non trail version of powerdvd, since the current one isn't working? thanks
i have an xfi xtremegamer, which i just registered, thinking that might be the problem.
anyone?Message Edited by pepper000 on 05-08-200708:6 PM
Message Edited by pepper000 on 05-08-200708:32 PM
Message Edited by pepper000 on 05-08-200708:38 PM
Message Edited by pepper000 on 05-08-200708:4 PM

I'm having an almost identical issue. I don't even get THIS far. I just bought an XFI extreme gamer fatality edition and every time I click on the "Get Power DVD" link, I get this...
<img height="264" style="width: 420px; height: 264px" src="http://www.fileden.com/files/2008/2/22/775483/Error.JPG" title="Error Message" width="420" alt="Error Message">
Someone HELP!!!

How do you close " CyberLink power DVD"

Keep getting notification to close Cyber Link power Dvd when i try to view a video , I have a new HP Pavilion Windows 8.1
Cant find solution other than to reboot

Hi rhr22,
Welcome to the HP Forums!
I have read your post on how your CyberLink Power DVD gives you a notification when viewing videos, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
Has your computer completed all of its important Windows Updates?
Is this an on-going or recent issue?
If you use a different video viewing program such as Windows Media Player?
When you receive this notification, is there a numbered error in the same window?
Do you get this same error message if you try different DVDs?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Cyberlink power DVD activation key.

Hello.
I have played DVDs on this Satellite C75D-A7102 before but now the Cyberlink app (Toshiba installed) Said I need an activation key to start the app. Win 8.1 with AMD A6 chip. How can I get this activation key? Cyberlink power DVD is not listed in the add/remove programs list but it was loaded from the factory. DVDs used to autoplay but do not anymore.
Thank you in advance.
Pete

Satellite C75D-A7102 Specifications
Satellite C75D-A7102 Support Page
Pete
I have no solution to your specific problem. Your specifications above make no mention whatsoever of Cyberlink. What is mentioned, is the 'Toshiba Media Player by sMedio Truelink+'. Given Cyberlink is NOT listed as an included software with your system, even as 'Trial Software', regardless of your assertion that it was factory loaded, I don't see there being any chance of obtaining an activation code for it.
Try the Toshiba Media Player instead. Personally, I like VLC Player, and I never have problems playing DVDs, CDs, MP3s, etc, or any kind of audio/visual media with it.
With regard to Autoplay, if it has in fact become disabled on your laptop, I would strongly advise you to leave it that way. One of the main ways viruses propagate themselves is through USB flash drives, burned CDs/DVDs and any portable/removable media. The infected machine puts the virus on the removable media, often using Auotplay to do so, and when that media is then put in any other un-infected machine, the virus can then use Autoplay to infect this unit. Disabling Autoplay is one way to help prevent the spread of viruses.
Mike

Parallel and Power DVD

I tried to run Power DVD in Parallel but the play is very jolty. Can someone please help me?

I'm sorry but support for Parallels is at http://forum.parallels.com/. Support for Power DVD would come from its developer.
The Apple Discussions provide user-to-user technical assistance for Apple products.
Games or software requiring 3D hardware graphics support will not run well in Parallels because it does not provide hardware graphic support. You can find out more by going to the Parallels' forum.

Power dvd xp 64 bit prob

Hi
I have creative li've 5.
i am using win xp64 bit
My problem is when i check the "use spdif output" in power dvd program my computer is frozen.
So i have to reset my computer.
i don't understant why it be
thank you for your interest

Hi,
what version of powerdvd are you using. I use to have the same problem with the XP version,(my computer would reboot) until I either used a patch or upgraded. I cant remember which.
regards,
AL

Power DVD 3.0 or MSI DVD in XP?

Similar Messages

Maybe you are looking for