Power Failure, now iMac failure

Hi there,
I have an early '09 iMac that has suffered though 5 back to back power outages and restores by the local utility. Now it won't boot into mavericks. I get the spinning gear until I shut the machine off. Attempts to boot into safe mode have the same result.
I've tried all the typical solutions listed on the net. I've tried booting with verbose mode on, and it seems to hang up around the time bluetooth drivers are loaded up. (forgive my PC language)
I can boot into single user mode and have checked the HDD, it checks out fine. I've also run disk utility in recovery mode and that also reports no problems. Ive also repaired permissions until no more are listed.
The next step I tried is an Lion install disk, unfortunately I can't downgrade my OS....
Then I tried a Time Machine restore, to no effect. Same with a new mavericks install from the apple in recovery mode.
Here's the weird thing, I had an old WinXP install on another partition that I installed when I was running Snow Leopard, and despite Maverick's not supporting XP, I was able to boot into XP normally, by pressing "C" on startup. This leads me to believe that the problem is software related, not hardware!
I guy I was talking to about this problem had mentioned something about a kernel rebuild or something? Does that sound familiar?
Is there any other option that I can try aside from a complete format and re-install? I have a ton of media on this HDD that isn't backed up, and I don't have access to another mac with a firewire port.
Help please!

Have you tried booting while holding down the Option key?
Startup Manager: How to select a startup volume

Similar Messages

IMac won't power up - 3rd iMac failure...

OK so my 3rd iMac is destined for the repairers (numbers 1 and 2 were returned direct to Apple as they failed within 2 weeks).
It had been randomly turning itself off and on again and this got more frequent. About a week ago it wouldnt reboot for 1.5 hours and yesterday it died totally and wouldn't reboot all evening.
There is no sound on startup, it goes to start up and fails, no screen, no noise, no nothing - and the light on the front of the display is solid white.
Any ideas? I am SO fed up with iMacs

welcome, Kirrianna , to the forum,
and - whow!! -- 3 iMacs in a row with the same failure??? this sounds strange indeed! My first iMac is still running after 7.5 years, the G5 i bought 1.5 years ago has developed recently a problem, and my powerbook is running since 1 year w/o problem. Thus, you must attract bad luck, it seems.
could it be a power problem? can u try to use stabilized power?
about the start-up chime: if you turn off the output of the loudspeakers, there will be no sound.
can you start from the cd?
before I (and others) can give you some more hints, please indicate what machine you have, and what you did to get it running eventually. if the powerlight is on, something should happen...
please, post back,
thomas
iMac G5, 768 MB, PB G4 12" Mac OS X (10.3.9) PB runs osx 10.4

Following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?

following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
Also mail not loading. The error report suggests that I look for updates from the app store?

http://www.apple.com/support/mac/app-store/contact/

External Hard Drive Failures after iMac internal drive replaced

I was one of those lucky ppl who had to have my internal 1TB Seagate HDD replaced due to the recall. It was replaced on Friday.
After the drive was replaced (with another Seagate, ***?), I cloned my previous system back to the new drive (restoring from Time Machine required me to re-download Lion, which required me to re-download to a newer version of Snow Leopard, and just, Oi, vey, I used my clone).
I then had to create another bootcamp partition, and after that, I restored my previous bootcamp from an image backup with Winclone.
The next morning, my Time Machine external backup drive (a Maxtor OneTouch) makes horrible fluttering and crunching noises and cannot be found via disk utility, certainly doesn't mount to the desktop. I figure it just coincidentally failed and attached a new drive (a different OneTouch) for backup.
While Time Machine is performing an initial backup to this new drive (will take 10 hrs), I try to move a few media files to another external media drive (LaCie 1TB). I receive a couple of error -36s on a few particular files, so I figure I should wait for the Time Machine to backup and then diagnose the media drive.
The next morning (after 10 hr backup is finished), I have a stop-sign error that a disk was unmounted improperly (the LaCie media drive). The drive cannot be seen in disk utility or on a completely different MBP running Snow Leopard. It's spinning up, but it can't be read.
Only thing I can think to do is reinstall 10.8.2 over top the cloned system, make sure that the recovery partition was recreated and working.
This can't be a coinicidence, right? At this point, I'm afraid to keep my external storage drives and clone attached to the iMac, but I'm afraid to not have TM drive attached. Anyone know where to start diagnosing the problem?
1. Could a new internal drive be the problem, hardware wise?
2. Could the lack of an initial recovery partition or the setting up of a bootcamp partition have these sorts of consequences?
3. Could the problem be from restoring a clone?

Well, it is a LaCie-packaged adapter, some version of that model. The hub is on the mac mini inspired line of LaCie HDs (http://www.lacie.com/company/news/news.htm?id=10269). I've had it for 6 yrs, and the hub is still going. Other drives have been running from the hub without issue for all that time (and still are). There is no hissing, and the display light indicates the hub is getting power.
You think it's time for a new hub?
The internal switchout is just a coincidence?
(Basically, I'm not a hardware expert. Does anyone know if an internal drive or internal sensor/connection problem can cause externals to fail or blowout a controller? I'm waiting on a drive dock to arrive—I'll know more whether these are HD failures or chip failures after that. Both drives showed normal-seeming power use via their display lights.)

What does this alarm mean ....... hwStringMatch - HP Insight Management Agents Trap Alarm: Logical Drive Status Change: Slot 1, Drive: 2 ......... Status is now Predictive Failure

Hi,
I have received this trap from the Call Manager PUB server running version 7.1.5.31900-3
hwStringMatch - cmaidad[5579]: Physical Drive Status Change: Slot 1 Port 2l Box 1 Bay 1. Status is now Predictive Failure
I have checked the drive status via CLI and all drives show OK, both physical & logical
Is there anywhere you can check what is causing this event and is it merely advising of a potential drive failure

Hi
Modern drives have embedded monitoring. Whilst the disk hasn't failed, something internally is telling the embedded monitoring that it may soon fail - it's running a little hot, having excessive write errors, latency is drifting up... something subtle is going wrong.
It could be caused by a firmware error... but I'd take it at face value.
It might have failed by the time you read this, or it might work fine for another 20 years.
Either way - when I was a server admin I would get any disk with a predictive failure swapped out immediately. No point waiting for it to fail - even on a RAID system when a disk fails although you don't lose data you have your trousers down as a coincidental second failure would ruin your day!
Regards
Aaron

Power save plug in failure

I'm trying to watch sky tv on my macbook pro via sky go and am able to watch one episode. when I try to watch anything else I get safari power save plug in failure notice.
I have tried disabling the plug in but it still will not let me watch content.
The only thing that lets me watch anything else is restarting the mac.

Mac HD/Library/Internet Plugins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.pluign files.
Empty the trash.
Safari will use Preview to view PDFs in browser windows.

ETL Failure Due to Failure of a Task

Hi All,
I am getting ETL failure due to failure of a task, sporadically. Also, when i re-run the ETL, the ETL completed successfully.
I have copied the informatica session log file.
DIRECTOR> VAR_27027 Use default value [0] for user-defined workflow/worklet variable:[$$passInStatus].
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [SEBL_80] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [1] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint1].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint2].
DIRECTOR> TM_6014 Initializing session [VisibilityActivityParty_Full] at [Wed Aug 17 00:31:31 2011]
DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Base_Integration_Service]
DIRECTOR> TM_6686 Folder: [SDE_SBL_80_Adaptor]
DIRECTOR> TM_6685 Workflow: [VisibilityActivityParty_Full]
DIRECTOR> TM_6101 Mapping name: VisibilityActivityParty [version 1]
DIRECTOR> TM_6827 [D:\Informatica\PowerCenter8.1.1\server\infa_shared\Storage] will be used as storage directory for session [VisibilityActivityParty_Full].
DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
DIRECTOR> TM_6703 Session [VisibilityActivityParty_Full] is run by 32-bit Integration Service [node01_sb8anaprd], version [8.1.1 SP5], build [0822].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [ASCII]
MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6151 Session Sort Order: [Binary]
MAPPING> TM_6156 Using LOW precision decimal arithmetic
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM Error Log Disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [obieeprd], user [OLAP]
MAPPING> DBG_21474 Warning: Update Strategy transform [UPDTRANS] is disabled. Set session type to [Data Driven] to enable it.
MAPPING> TM_6007 DTM initialized successfully for session [VisibilityActivityParty_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Aug 17 00:31:31 2011)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Aug 17 00:31:31 2011)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 36000000 bytes and Block size is 65536 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [SB8PRD], user [SIEBEL]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [obieeprd], user [OLAP], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8397 Appending output data to file [D:\Informatica\PowerCenter8.1.1\server\infa_shared\BadFiles\w_act_party.bad] (initial size [717]).
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL INSERT statement:
INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL UPDATE statement:
UPDATE W_ACT_PARTY SET ETL_PROC_WID = ?, ACTIVITY_ID = ?, PARTY_ID = ? WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL DELETE statement:
DELETE FROM W_ACT_PARTY WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_ACT_PARTY]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> RR_4029 SQ Instance [SQ_S_ACT_EMP] User specified SQL Query [SELECT
     AEMP.ROW_ID,
     AEMP.ACTIVITY_ID,
     U.PAR_ROW_ID
FROM
     V_ACT_EMP AEMP,
     S_USER U
WHERE
     AEMP.EMP_ID = U.ROW_ID]
READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Wed Aug 17 00:31:32 2011
Target tables:
W_ACT_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Aug 17 00:31:32 2011)
LKPDP_1> DBG_21097 Lookup Transformation [LKP_W_ACT_PARTY]: Default sql to create lookup cache: SELECT ETL_PROC_WID,INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID FROM W_ACT_PARTY ORDER BY INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_W_ACT_PARTY] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_1:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_W_ACT_PARTY{{DSQ}}] instance name [LKP_W_ACT_PARTY{{SRC}}]
LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_9W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_W_ACT_PARTY].
LKPDP_1:TRANSF_1_1> DBG_21641 LKP_W_ACT_PARTY: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_1:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_W_ACT_PARTY{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_W_ACT_PARTY
TRANSF_1_1_1> DBG_21313 Lookup table : W_ACT_PARTY
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_W_ACT_PARTY will be the default port value
LKPDP_2> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_2> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_2> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_2:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_2:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_2:READER_1_1> BLKR_16007 Reader run started.
LKPDP_2:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_2:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_ETL_PROC_WID{{DSQ}}] instance name [LKP_ETL_PROC_WID{{SRC}}]
LKPDP_2:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_2:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_2:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_2:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_2:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_10W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_ETL_PROC_WID].
LKPDP_2:TRANSF_1_1> DBG_21641 LKP_ETL_PROC_WID: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_2:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_ETL_PROC_WID{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_ETL_PROC_WID1
TRANSF_1_1_1> DBG_21313 Lookup table : W_PARAM_G
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_ETL_PROC_WID1 will be the default port value
WRITER_1_*_1> WRT_8167 Start loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8229 Database errors occurred:
ORA-01400: cannot insert NULL into (ETL_PROC_WID)
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8114
Row # [1] in bad file
WRITER_1_*_1> CMN_1053 : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1
INTEGRATION_ID (INTEGRATION_ID:Char.30:): "1-B8THY"
DATASOURCE_NUM_ID (DATASOURCE_NUM_ID:Double:): "1.000000000000000"
ETL_PROC_WID (ETL_PROC_WID:Double:): "(NULL)"
TABLE_WID (TABLE_WID:Double:): "68.00000000000000"
ACTIVITY_ID (ACTIVITY_ID:Char.15:): "1-N8FBX"
PARTY_ID (PARTY_ID:Char.15:): "0-1"
WRITER_1_*_1> WRT_8164 Error loading into target [W_ACT_PARTY] : Bad rows exceeded Session Threshold [1]
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 [
ORA-24795: Illegal ROLLBACK attempt made
Database driver error...
Function Name : Commit
Database driver error...
Function Name : Rollback]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_ACT_PARTY]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8080 Writer run terminated. [Error loading data and error threshold reached]
WRITER_1_*_1> WRT_8168 End loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> WRT_8035 Load complete time: Wed Aug 17 00:31:32 2011
LOAD SUMMARY
============
WRT_8036 Target: W_ACT_PARTY (Instance Name: [W_ACT_PARTY])
WRT_8038 Inserted rows - Requested: 488 Applied: 0 Rejected: 1 Affected: 0
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [W_ACT_PARTY] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.656254] secs, Total Idle Time = [0.390627] secs, Busy Percentage = [40.476246].
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.562504] secs, Total Idle Time = [0.406252] secs, Busy Percentage = [27.777928].
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ACT_PARTY] has completed. The total run time was insufficient for any meaningful statistics.
MANAGER> PETL_24005 Starting post-session tasks. : (Wed Aug 17 00:31:33 2011)
MANAGER> PETL_24029 Post-session task completed successfully. : (Wed Aug 17 00:31:33 2011)
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_9W32] for transformation [LKP_W_ACT_PARTY].
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_10W32] for transformation [LKP_ETL_PROC_WID].
MAPPING> TM_6018 Session [VisibilityActivityParty_Full] run completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_S_ACT_EMP] (Instance Name: [SQ_S_ACT_EMP])
     Output Rows [50592], Affected Rows [50592], Applied Rows [50592], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_ACT_PARTY] (Instance Name: [W_ACT_PARTY])
     Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [1]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [VisibilityActivityParty_Full] completed at [Wed Aug 17 00:31:33 2011]
Can some one help me to debug the issue please ?
Thanks

Hi Nat,
Thanks a lot for your response.
I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
Please let me know if you have any question.
Thanks,
Neeraj

HT204053 Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

There is no problem about using one ID for iTunes, iTunes in the Cloud and iTunes Match, and another for iCloud and its email and syncing facilities. This way you can all use the same iTunes account but have separate emails and calendars etc.

SSRS Subscription LastStatus "Failure sending mail: Failure sending mail."

SSRS 2012, SQL 2012 SP2.
We have about 50 different daily subscriptions that go out. In the last month or so, probably over 30% of SSRS subscriptions are getting this error and no e-mail is sent. I have tested out the reports with the parameters and the reports run just
fine on demand for both the user and myself. I'll change the subscription forward for testing, and it will intermittently work or fail even when no traffic is hitting our database so I dont think it's a matter of performance.
I see nothing in the error logs, and I see nothing in the logtable 2, or 3 in ssrs as suggested by a few MSDB sites.
The only spot I can even see this error, is when viewing the subscription. I have done LOTS of searching, and most people get a helpful error after "Failure sending mail" where as I only get 'Failure sending mail: Failure sending mail"

Hi,
Does your network is always available? Your scenario is so strange. Please check if you have missed something according to this article:
https://msdn.microsoft.com/en-us/library/ms159155.aspx.

HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message

HP Officejet Pro 8500 A910n ( CM758A ) Scan to email failure Error Server Failure Try again Later message
Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure Try again Later " message . Can run test to the scanner without any errors. Tried to reset the printer - same result.
Any help would be much apreciated. AHuber

Hello there! Welcome to the forums @TheShadow42 ,
I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Core i3 mac not seeing power pc g4 imac in target disc mode

I'm trying to migrate my set up from a power pc g4 imac running a 10.4.11 to a core i3 imac. All the system software and firmware on the g4 imac is upto date and the mac will enter target disc mode. The macs are connected using a brand new 6 pin to 9 pin firewire cable. The iMac core i3 will not see the other mac in target disc mode. When trying the same thing using the migration assistant, migration assistant just hangs with the 'waiting for your other mac to restart'.
I'd really appreciate any help to fix the issue.

Is this the newest model with Thunderbolt? If so then see Thunderbolt 10.6 Help: Transferring files between two computers using Target Disk Mode and Intel-based Mac may become unresponsive in target disk mode.
Have you checked to be sure the drive in the G4 is configured as the Master? If it isn't, then it cannot be seen in TDM.

My ipad went dead due to power outage.now it is asking for a passcode.it will not except any passwords that i use.it will not sync to my computer/itunes.help

my ipad went dead due to a power outage.now when i turn it on it asks for a passcode.i have never used a passcode. it will not sync with computer/itunes
help

Follow these instructions to resolve a forgotten passcode:
http://support.apple.com/kb/HT1212

How To Remove Autorun of PREVIEW Application after Power On of IMac?

Hi all,
Need Help here.
Everytime I power on my IMac it automatic run the application "PREVIEW".How to remove this "Autorun" ?
Thanks!

Hello Justrain
If you click on....
Blue Apple ( top left of your screen there ) > System Preferences > Accounts > Log in items.
Is preview highlighted there?
If it is, you can " de-select " it from the list. That should cure the problem for you. I hope it does.
Regards
Ian

Step failure causes sequence failure Option

Hi !
I need some clarification about the Step failure causes sequence failure Option , I'm using TS 4.2 Under Win XP .
Lets say i have a Seq with 4 steps in all of then Step failure causes sequence failure Option is Checked .
Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? and will it record the result for this steps ?
Thank U .
Kobi Kalif
Software Engineer

Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? YES
and will it record the result for this steps ? YES
What this is signifying, is if a Step fails then when the Sequence has completed and returned back to the caller the status of this step will be FAILED.
If you need to jump to Cleanup then you will need to set the Post Action.
regards
Ray Farmer
Regards
Ray Farmer

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

Power Failure, now iMac failure

Similar Messages

Maybe you are looking for