Power for 4500E upgrade to Sup-8 and 5 WS-X4748-UPOE+E line cards

I can't seem to find any documentation on the power requirements for a 4500E chassis with a SUP-8 and five WS-X4748-UPOE+E line cards.  I'm currently running two PWR-C45-1300ACV in this chassis but suspect I may need a power increase to support the new UPOE modules.

Hi hhorton, Can i ask what modules are you trying to add on your current power and is there a dedicated circuit for the power? for further assistance please feel free send me an email so I can help you look for the best power supply for your situation hope to hear from you soon
Regards,
[email protected]

Similar Messages

  • HT4528 I am due for an upgrade on 5/23 and I wanted to find out - can I bring my old iphone 4 to the apple store and get a new iphone 5 through the apple store instead of verizon?  Will it cost the same to get the phone as through Verizon?

    I am due for an upgrade on 5/23 and I am trying to find out if I can get my phone through the Apple store?  I have an iphone 4 and am hoping to upgrade to a iphone5.  Just want to make sure if the price is the same as if I went to a Verizon store to upgrad. 

    I don't believe they were looking for a trade in, they are due for a subsidized Verizon upgrade. I think the bringing the iPhone 4 was for setting it up and transferring as Verizon does not require you to swap your previous phone for an upgrade.

  • Working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

    working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

    Try http://www.microsoft.com/mac/support.

  • While using iPhone 5 as tether, downloaded the latest update. phone shutdown in preparation for receiving upgrade connection was lost and now won't power back up. suggestions

    While using my iPhone 5 as my personal hotspot.  I downloaded the latest update thru connection to my laptop.  During the process of installing update  to my phone it shutdown.  Now the phone will not power back up, instead it will only show the Apple icon then shows the icon of the USB cord needing to be connected to iTunes.  Suggestions

    That indicates that you phone is in recovery mode and needs to be connected to iTunes on your computer to be restored.

  • Itunes is prompting me for an upgrade, I click it and it wants to open AOL, I don't want it to use that service provider, How do I change that?

    Hi I have an older version of iTunes and when I open it, the program prompts me to download iTunes 10. I click on the down load button on screen and it launches AOL. I don't have an AOL account. I did years ago. How do I change what service provider it looks for?

    Just go to iTunes.com and download the latest version.

  • I have lightroom5 and have paid for an upgrade to lightroom 6 and it has not insralled..How can I download another copy. I can only see cloud applications! I live in australia

    Any suggestions would be appreciated

    If you have installed the free version of Creative Cloud you can simply click on the Try button next to Lightroom CC 2015. Then use your serial number to convert it to LR6 perpetual. See this link:
    https://helpx.adobe.com/lightroom/kb/serialize-lightroom-cc-trial-to-activate-as-lightroom -6.html

  • My mac wifi connection to DSL line was down when I tried to upgrade Ipad to IOS6, and it defaulted to Ipad data line and consumed my monthly allotment of data -- How can that happen as a technical matter?

    Maps did not work for me for the first week after upgrading to IOS6 on my New Ipad -- I have since learned that I exceeded my 2 gig monthly data plan and therefore I had no 4G access on my ipad, which meant Maps couldn't work while traveling.  Since I never download videos, I knew I had not knowingly downloaded that much data.  When I called AT&T, they told me that when I upgraded to IOS6 I consumed over 1 gig of data.  
    I did the upgrade while connected to my iMac, which in turn has a wireless connection to router connected to my home DSL line.   My wifi service has been spotty lately, possibly because router is defective.  So let's assume that when I tried to download IOS6 that my iMac did not have a good wifi connection.  Is the AT&T person correct that the download defaults to the Ipad's 4G cellular network, even though the iPad is connected to the iMac by USB cable?  I didn't think that was possible as a technical matter -- i.e., that the iMac gets automatic access to the iPad's connection to the cellular network.  (I'm sure I'm not explaining this right, I'm obviously not technical.)   
    Also, do you get any obvious warning or indicator on the device that you have exceeded your data limit for the month?  I sure didn't see any warning, (although I now know that I can go to Settings, then Cellular Data, then View Account and find the status of my data line account).  
    Thanks for any help on this. 

    Strange. It works fine with my setup which is no different from yours. Problem with the cable or LAN port(s)?

  • I just upgraded my Firefox program and now a group of black lines running 10-15 deep are appearing on my monitor from time-to-time

    I just upgraded my Firefox program to a new version and immediately I started seeing a group of black lines running 10-15 deep running across my computer screen while on the Web. As I scroll down they sometimes disappear. Then they reappear. It doesn't happen all the time. But often enough.

    Contact Apple. That sounds like a hardware issue in the graphics circuit.
    1-800-APL-CARE
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • ITunes asked me for updates I said ok download and then it finish but the SIM card couldn't open and I can't use the cellphone and they ask me for support it

    what I can do for this problem

    Sounds like you have a phone that was hacked to run on a network other than the one it was originally locked to. Updating it has re-locked the phone to the original carrier. ONLY the carrier can authorize unlocking the phone.
    Where are you, where did you get the phone, and what network are you on?

  • I just paid for an upgrade on game & it did not go through

    I just paid for an upgrade on a game and it didn't work, what do I do?

    Contact either iTunes support or the App Developer.

  • Upgrading APPS R11 middleware and database

    Hi everybody!
    I have installed the apps R11 ver11.5.10.2(English & Albanian), DB 10g patchset 3 in Oracle Enterprise Linux 5 U2.
    Now i wont to upgrade as much as possible the database tier and middleware tier, without going to R12.
    Is there some documentation for the upgrade process of database and the application server?
    At what version of application server can i upgrade without going to R12?
    Thanks in advance, Soni.

    Hi Soni,
    i checked my prod environment and saw that my application server is 1.0.2.2.2 Rollup 5.
    According to metalink Doc ID: 254618.1 Oracle HTTP Server Patches Certified to be used with E-Business Suite 11i , does it mean that this is the most latest version i can upgrade to(my existing one)?You are running on the latest Rollup patch, so no additional patches are required.
    In other words, if i want to upgrade to Application server 10g, it would be impossible?
    I want to upgrade to 10.1.2.X for Web Server & J2EE application or 10.1.3.X(always if possible) , because i want to deploy some custom applications developed in JDeveloper where i use ADF BC.
    Is it possible without upgrading to R12?OracleAS 10g is not certified with Oracle Apps 11i, and you cannot replace Oracle Applications 1.0.2.2.2 with OracleAS 10g.
    If you want to use OracleAS 10g as an application server with Oracle E-Business Suite, you need to upgrade to R12.
    Note: 186981.1 - Oracle Application Server with Oracle E-Business Suite Release 11i FAQ
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186981.1
    Regards,
    Hussein

  • Preprations for SAP upgrade

    Hello,
    Does anyone know what preparations for BW have to be done before an R/3 upgrade.
    We are going to upgrade our R/3 system (currently 6.4) to mySAP Enterprise with ECC 5.0. The loads run daily or twice a day in the system. The production server is however going to be down for the upgrade during the weekend and it will be up and running after two days. We are currently using BW 3.5 SP10 and we use all FICO and Logistics DataSources. We are going to turn the loads off during those two days but do we have to do something else (e.g. empty logistics set up tables or anything else) before we shut down the system? and should anything specific be done when we turn on the system again?
    Sarah

    hi Sarah,
    check oss notes
    458305-OLTP system upgrade: What should I be aware of afterwards?
    359412, there may be some others
    301192 -> after upgrade, do 'activate' source system
    also stated, before upgrade
    If you use Logistic Cockpit, please make sure that you know notes 328181, 396647, 380078.
    These are absolutely prerequisit notes for using Logistic Cockpit.
    Never change the extract structure (communication structure) when there is data in SM13 or in the DeltaQueue!
    Never upgrade your PlugIn System when you have data in SM13 or in the DeltaQueue!
    SM13 and RSA7 have ALWAYS to be EMPTY BEFORE you apply any changes to communication structures, extract structures or any referenced Data Dictionary object or BEFORE you upgrade your PlugIn system!!!
    SM13 and RSA7 have to be EMPTY also when you apply PlugIn Support Packages!
    hope this helps.

  • FCP6 on Snow Leopard and Adobe CC on ML with GTX card in same machine?

    Hello, I have a couple 5,1 Mac Pros in a post production environment running Snow Leopard and FCP6. We would like to upgrade to Adobe CC and take advantage of CUDA with GTX cards. However, we still need to be able to open/re-edit old FCP projects for a while.
    FCP6 needs SL, while GTX cards need ML. My plan is to have each OS on separate HDDs and boot into the one we need at the time.
    Problem with this: The 5,1s currently have 5770s which require one of the two 6-pin power connectors but the GTX cards need them both.
    1. Is the best solution to open the case and switch which card is powered every time, depending on need?
    2. Is it ok to leave the non-powered card in the PCI slot while doing this?
    3. Is there a better solution to this problem?
    Thanks for any help.

    Separate machines if you can.
    The whole "drivers" and how you can't use that GTX in SL... I can run Windows with any card because drivers are available.

  • Catalyst 4510R-E and Line Card Options

    I am considering purchasing the following 4510R-E switch items for installation in a new building that will go online shortly.
    a) 1 x 4510R-E Chassis (WS-C4510R-E)
    b) 1 x Supervisor Engine 6-E (WS-X45-Sup6E)
    c) 1 x 24-Port 10/100/1000 Module (WS-X4424-GB-RJ45)
    d) 6 x 48-Port PoE 803.3af 10/100 (WS-X4248-RJ45V)
    We are purchasing classic line cards for item c and d initially due to budget restrictions.
    Three questions:
    1) What power supply should I purchase to power this configuration?
    2) The 4510 will connect to two Catalyst Blade 3020 switch, each using 4gig etherchannels. Can we do this connecting to item c or do we need an additional card (the only other things attached to item c are probably a Windows storage server and domain controller)
    3) Does this sound like it will give us good performance or have I missed anything?
    Many thanks for any advice
    Mark

    1:) Do you plan to use PoE with your line cards? Make sure you plan accordingly. I would recommend using the power calculator for this.
    2:)This can be done no problem. No additional equipment required.
    3:) You should be fine performance wise. This is a pretty standard setup.
    Cisco Power Calculator
    http://tools.cisco.com/cpc/launch.jsp
    HTH,
    Mark

  • Docsis 2.0 and 1.1 cable modems are not detected via UBR-MC20X20V-5D line card

    Hi All,
    We have uBR10K series CMTS and recently installed UBR-MC20X20V-5D line card, requirement is to configure this line card to support docsis 1.1 and 2.0. Problem is after finished the configurations modems (Hitron and Motorola) are not detected by the system. means no modem mac address listing under "Show cable modem" command. 
    Our CMTS has the following components
    ESR-PRE2: x1
    ESR-PRE-MEM-FD128: x1
    UBR10-DTCC:  x2
    UBR-MC20X20V-5D: x1
    iOS version:     12.2(33)SCE3
    Part of running-config as follows
    cable spectrum-group 13 band 22800000 26600000
    controller Integrated-Cable 8/0/0
     rf-channel 0 cable downstream channel-id 145
     rf-channel 0 frequency 501012500 annex B modulation 256qam interleave 32
     rf-channel 0 rf-power 59.0
     no rf-channel 0 rf-shutdown
    interface Cable8/0/0
     no cable packet-cache
     cable bundle 1
     cable upstream max-ports 4
     cable upstream 0 connector 0
     cable upstream 0 spectrum-group 13
     cable upstream 0 channel-width 3200000 3200000
     cable upstream 0 docsis-mode tdma
     cable upstream 0 minislot-size 2
     cable upstream 0 range-backoff 3 6
     cable upstream 0 modulation-profile 21
     no cable upstream 0 shutdown
    diag output attached herewith. Please any one advice on how to resolve this issue.
    Thanks in advance.

    Hi All,
    We have uBR10K series CMTS and recently installed UBR-MC20X20V-5D line card, requirement is to configure this line card to support docsis 1.1 and 2.0. Problem is after finished the configurations modems (Hitron and Motorola) are not detected by the system. means no modem mac address listing under "Show cable modem" command. 
    Our CMTS has the following components
    ESR-PRE2: x1
    ESR-PRE-MEM-FD128: x1
    UBR10-DTCC:  x2
    UBR-MC20X20V-5D: x1
    iOS version:     12.2(33)SCE3
    Part of running-config as follows
    cable spectrum-group 13 band 22800000 26600000
    controller Integrated-Cable 8/0/0
     rf-channel 0 cable downstream channel-id 145
     rf-channel 0 frequency 501012500 annex B modulation 256qam interleave 32
     rf-channel 0 rf-power 59.0
     no rf-channel 0 rf-shutdown
    interface Cable8/0/0
     no cable packet-cache
     cable bundle 1
     cable upstream max-ports 4
     cable upstream 0 connector 0
     cable upstream 0 spectrum-group 13
     cable upstream 0 channel-width 3200000 3200000
     cable upstream 0 docsis-mode tdma
     cable upstream 0 minislot-size 2
     cable upstream 0 range-backoff 3 6
     cable upstream 0 modulation-profile 21
     no cable upstream 0 shutdown
    diag output attached herewith. Please any one advice on how to resolve this issue.
    Thanks in advance.

Maybe you are looking for