Power Injector for Airport Extreme (Generation 5)

Hello.
Is there any support for using Power Injector (PoE) instead of the supplied power apdater to run Airport Extreme.
Cheers
Mr Apro

Sorry, but Power over Ethernet is not supported on the AirPort Extreme.

Similar Messages

Need power cable for airport extreme

need power cable for airport extreme

http://www.mac-pro.com/Airport-Extreme-Base-Station-Power-Adapter
Just one of many if you enter AirPort Extreme Power Adapter in a Google search.

Power Supply for Airport Extreme

Hi
Does anyone know where I can get a new power supply for my airport extreme in the UK? Mine has died, and I don't really want to buy a whole new base station just because of the external supply. (I know the actual unit is working through plugging in a power supply from my other base station)
I tried Apple, who weren't really any help.
Thanks in advance!
Tom.

Tom welcome to the discussions.
I would probably call the Apple number.
1-800-MY APPLE
I am sure that they can point you in the right direction.
I am a little shocked that one of the Apple Retail stores can't offer you a Power Supply.
If all else fails, it sounds like you have tried an alternitve, if it works use it, until you can get a replacment.
Don

Longer power cord for airport extreme

I am needing a longer power cord cord for my new airport extreme base station Model ME918LL/A. It's the cube one with the internal power supply. It only comes with a six foot cord and I need at least 12 feet to place it in the optimal place in our office. In suggestions where I can find a longer cord. Amazon and tiger direct sale cords that look similar, but I want to be careful and fry it the device. Has anyone else had a similar problem and where did you find a longer cord?

You may have to reconsider the diameter of holes through which
the wire has to pass, or discover an alternative power source at
a nearer distance to the AirPort Extreme (with backup power &
perhaps a backup battery type of power unit w/ power filter.)
Part of the problem with distance and electrical signal over wire
is that a larger capacity wire is needed due to loss over distance.
The greater the distance, and the larger the gauge is needed.
A lower-than-specification power at the unit likely would result
from too-long a power lead.
My AirPort units (Extreme and Express, in use) are protected by
a battery-backup APC or other automatic device that switches to
its own battery and takes the unit offline when power it too high
or when it is too low. And not one of the cheaper backup units.
So the issue isn't just a long cord, but one of significant better
quality than just a long cord of the same external diameter case
or layer of insulation over whatever gauge lies beneath.
That's a reason why the wire isn't longer; it'd also have to be larger
in wire gauge capacity and heavier. Then other costs would add up.
You may be able to ask a professional appliance company who could
look over the AirPort Extreme power cord and match the small end
where the unit plugs in, with one of a higher gauge wire (larger wire
so that's a smaller number wire for larger size/gauge; for the distance.
However you do it, have fun...
Good luck & happy computing!

Changing power output for Airport Extreme Card

How do you change the power output for the Airport Extreme Card? Is there a program that I can download to change airport's settings or the Airport Extreme Card's settings?
i.e. If the default power output for the Airport Extreme Card is 18mW, I would like to increase it to 25mW.

There is no way for a user to control the power output of the AirPort Extreme card.
Furthermore if the card was manufactured to output 18mW there is no magical way to increase it's physical ability so it can output more power.

Missing power cord for Airport Extreme model 1034 (2003)

I found my old Airport extreme, the white dome type model 1034 (2003). I replaced it with a time machine a few years ago. Now I would like to use it to extend my network into my studio but I can't find the power cord. Can I use a universal adapter input 5.1volts 2.4A? If not, where can I get a new power cord?

Seems like Apple Support would be a good place to start. If Apple does not have the item, I doubt that anyone else will either.
http://www.apple.com/support/contact/

My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC. I hate to spend another $179 if this is just something I'm doing wrong. Please help

I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

Are there updates available for Airport Extreme? If there are, will I be notified of an available update?

Are there updates available for Airport Extreme? If so, will I be notified or should I check from time to time for any updates?

Back up your data, check your applications for compatibility, and download Mavericks from the Mac App Store.
(108187)

Where do I download drivers for airport extreme.....my iPad can not be set up by he current software

where do I download drivers for airport extreme.....my iPad can not be set up by he current software

I have an airport extreme with updated software(latest) and I setup an Ipad 3 on it with ios6(wirelessly). You can access the airport to update it with the utitlity app on an ios device, mac, or pc. I dont think it has anything to do with the airport software. Did you try rebooting the airport, then trying again?
Like james said, maybe more detail would help someone help you.

Can not find Power Injector for wap2000.

Hello everybody.
Not long ago i was bought Cisco wap2000 access point for small business, and now the problem is to find power injector for this device.
I am already tried to use AIR-PWRINJ3, but access point did't turn on.
Why?
Which power injector should i use with this device?
Thanks.
PS.
Please, don't judge me, for my bad english. =)

I would think that:
http://www.google.com/products/catalog?hl=en&biw=1168&bih=723&q=cisco+AIR-PWRINJ4%3D&um=1&ie=UTF-8&tbm=shop&cid=1924636136971570879&sa=X&ei=oGf_TcGfHoy40AH2xLDjAg&ved=0CIMBEPICMAU#
should work, Cisco should be able to confirm . . .
If not then I would try:
http://www.versatek.com/products/cisco_power_injector.htm?_kk=cisco%20PoE%20injector&_kt=90d05a21-707c-456a-8dc9-c92b9a334f1b&gclid=CPnpz-nlxKkCFUqM5godGH4Mmw
I know your original post was in January and you may have created that 100m power cord but I hope this helps others.

Power Injector for WAP200

Hello
I need your advice on whether power Injector for Aironet AP’s can be also used for SB WLAN products.
Is AIR-PWRINJ4= compatible with WAP200??
Any advice would be very appreciated.
Best Regards,
Allan Kim

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center.
Currently there are no Cisco/Linksys POE approved injectors for this device or any of our other small business products. Our recommendation for powering these units are to use either the supplied power adapter or a POE Switch that is 802.3af compliant. Any of our switches with a P in the model number would be perfect. Here is a link for you to our switches.
http://www.cisco.com/cisco/web/solutions/small_business/products/routers_switches/index.html
While it is possible for that Cisco Enterprise Injector to mentioned above should work, It has just not been tested so we can not completely recommend it.
Hope this helps.
Eric Moyers
Cisco Network Support Engineer
1-866-606-1866

Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX?

Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX? The installation CD simply says that the software can't be installed while running this OSX.

Mountain Lion already has the most recent, updated version of AirPort Utility installed on your Mac. The version on your CD is out of date, so you can trash the CD.
Look in Macintosh HD > Applications > Utilities > AirPort Utility.

Extend Air Omni for Airport Extreme

I buyed from Apple Store Online the Extend Air Omni for Airport Extreme, but now my Airport Extreme don't have a antenna port.
It's possible ?

Only the M8799LL/A & M9397LL/A models of the AirPort Extreme Base Stations (AEBS) provide an external antenna port which you can plug the ExtendAIR Omni.

Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

50 users per device, assuming that the "main" router is setup to deliver an adequate number of network IP addresses for all devices.
2 AEBS = 100 users, but that is really more of a theoretical max.
If you really need 100 connections, it would be much better to use 3 AEBS to spread things out.

Any idea on an update on 7.5.2 for airport extreme

Does anyone know if there will be an update to 7.5.2 for airport extreme?

The latest firmware for the Extreme is 7.5.2

Power Injector for Airport Extreme (Generation 5)

Similar Messages

Maybe you are looking for