Power Injector State
We have 1131 LWAP's and WCS v.5.0.56.2
On the controller you have a checkbox when configuring AP's that enables the AP's to override the POE capabilities of the switch. I've been searching in the WCS for the same checkbox, but cant find it. Has Cisco forgot this option in WCS?
Hi Stefan,
Sadly this setting cannot be changed via the WCS :( This restriction has carried across all Versions/Releases of the WCS.
Hope this helps!
Rob
Similar Messages
-
Report for Power Injector State
I need a report for all Power Inyector installed with a AP, how i have this information in a report?
please i need helpThe is no way to detect if your using a power injector or not. There are commands to enable if your using a power injector, but that doesn't mean its not connected to a PoE switch.
That would be a manual process of going to each ap and looking. -
LWAP PoE settings when using power injector
We have 3500 series access points connected to a 5508 WLC. What power over ethernet option should I select for an AP thats using a power injector? Prestandard State or Power Injector State?
Just leave it alone. This setting is for old APs like the 1130 and 1240 and older.
-
Aironet Power Injector -Air-Pwrinj-Blr2=
I am working with a Aironet Power Injector (Air-Pwrinj-Blr2=) trying to connect it to the access point it comes with to a desktop running Windows XP. I am able to connected to it and use cli commands via hyper terminal, but I am not able to get a network signal to the desktop. I was able to find the IP address or what I assume is the ip address, but can't ping it from inside the office and I am not able to use the ip address to get a connection to the power injector via browser. Has anybody worked with one of these units before this is a first for me and I am hoping somebody can steer me in the right direction and get this working. The Ethernet, Status and Radio are all blinking green lights on the access point and the Install is not used on this model so no light there. Thanks in advance for any help provided!
what error do you get when you http://10.0.0.1 ?
webpage cannot be displayed
seems to function cli mode fine?
it seems to, but I'm also not very familiar with this piece of equipment
I am also receiving a blinking green light under (E) Ethernet and also under (S) Status
the device does a sh tech?
Heres what I received from this command:
ap#sh tech
------------------ show version ------------------
Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(25d)JA, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 09-Dec-10 16:12 by prod_rel_team
ROM: Bootstrap program is C1310 boot loader
BOOTLDR: C1310 Boot Loader (C1310-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (
fc1)
ap uptime is 4 weeks, 3 days, 21 hours, 11 minutes
System returned to ROM by power-on
System image file is "flash:/c1310-k9w7-mx.124-25d.JA/c1310-k9w7-mx.124-25d.JA"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-BR1310G-A-K9 (PowerPCElvis) processor (revision A0) with 25590K/71
68K bytes of memory.
Processor board ID FTX1220U0G1
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:21:55:CC:70:3A
Part Number : 73-8960-09
PCA Assembly Number : 800-24963-06
PCA Revision Number : A0
PCB Serial Number : FOC12171GGX
Top Assembly Part Number : 800-28764-01
Top Assembly Serial Number : FTX1220U0G1
Top Revision Number : A0
Product/Model Number : AIR-BR1310G-A-K9
Configuration register is 0xF
------------------ show running-config ------------------
Building configuration...
Current configuration : 1009 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
logging rate-limit console 9
enable secret 5
no aaa new-model
dot11 syslog
username Cisco password 7
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
shutdown
station-role root access-point
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address dhcp client-id FastEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
line vty 0 4
login local
end
------------------ show stacks ------------------
Minimum process stacks:
Free/Size Name
2612/6000 soap_flash init
11624/12000 Setup
5604/6000 Autoinstall
5564/6000 Clock Update Proc
5628/6000 dot11 platform init
8836/12000 Init
11308/12000 BootP Resolver
5456/6000 RADIUS INITCONFIG
10828/12000 DHCP Autoinstall
2544/3000 Rom Random Update Process
9628/12000 Exec
Interrupt level stacks:
Level Called Unused/Size Name
4 2428500 8164/9000 dot11 radio interrupt
6 9538 8860/9000 NS16550 VECTOR
------------------ show interfaces ------------------
BVI1 is up, line protocol is up
Hardware is BVI, address is 0021.55cc.703a (bia 0021.55b2.4d70)
Internet address will be negotiated using DHCP
MTU 1500 bytes, BW 54000 Kbit/sec, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
79221 packets input, 15586895 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
103299 packets output, 33985371 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
48621 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
Dot11Radio0 is administratively down, line protocol is down
Hardware is 802.11G Radio, address is 0021.55b2.4d70 (bia 0021.55b2.4d70)
MTU 1500 bytes, BW 54000 Kbit/sec, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/1127/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/30 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
FastEthernet0 is up, line protocol is up
Hardware is PowerPCElvis Ethernet, address is 0021.55cc.703a (bia 0021.55cc.70
3a)
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Full-duplex, 100Mb/s, MII
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:02, output hang never
Last clearing of "show interface" counters never
Input queue: 0/1127/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
2004070 packets input, 385155716 bytes
Received 2004070 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
424653 packets output, 66628823 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
32 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
------------------ show controllers ------------------
interface Dot11Radio0
Radio AIR-MP31G, Base Address 0021.55b2.4d70, BBlock version 0.00, Software vers
ion 6.30.25
Serial number: FOC1218B109
Number of supported simultaneous BSSID on Dot11Radio0: 16
Carrier Set: Americas (US) (-A)
Uniform Spreading Required: No
Configured Frequency: 0 MHz Channel 0
Allowed Frequencies: 2412(1) 2417(2) 2422(3) 2427(4) 2432(5) 2437(6) 2442(7) 244
7(8) 2452(9) 2457(10) 2462(11)
Listen Frequencies: 2412(1) 2417(2) 2422(3) 2427(4) 2432(5) 2437(6) 2442(7) 2447
(8) 2452(9) 2457(10) 2462(11) 2467(12) 2472(13) 2484(14)
Beacon Flags: 0, Interface Flags 60109, Interface Events 0, Mode 9; Beacons are
disabled; Probes are disabled
Configured CCK Power: 100 mW
Configured OFDM Power: 100 mW
Active power levels by rate
1.0 to 54.0 , 0 mW
OffChnl Power: 32767, Rate 1.0
Allowed CCK Power Levels: 1 5 10 20 30 50 100
Allowed OFDM Power Levels: 1 5 10 20 30 50 100
Allowed Client Power Levels: 1 5 10 20 30 50 100
Receive Antennas : right-a
Transmit Antennas : right-a
Antenna: internal, Gain: Allowed 4, Reported 4, In Use 4
Active Rates:
Current Rates: basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0
36.0 48.0 54.0
Allowed Rates: 1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
All Rates: 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
Default Rates: basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0
36.0 48.0 54.0
Best Range Rates: basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
Best Throughput Rates: basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic
-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
Current Voice Rates: basic-5.5 basic-11.0 6.0 12.0 24.0 [disabled until voice p
acket-discard enabled]
Default Voice Rates: basic-5.5 basic-11.0 6.0 12.0 24.0
Managment Rates:
Multicast Rates:
Data Rate Sensitivity (rate, SNR dB, Contention dBm)
( 1.0, 1, -98) ( 2.0, 7, -94) ( 5.5, 9, -92) (11.0, 16, -86)
( 6.0, 7, -92) ( 9.0, 14, -87) (12.0, 12, -87) (18.0, 15, -84)
(24.0, 17, -82) (36.0, 24, -76) (48.0, 29, -73) (54.0, 33, -69)
ERP settings:.
Neighbors in non-erp mode:
Number of MFP Indices: 10
RFID Tag Detection: Disabled
Multicast Address filtered:
Packet type filtered:
Probe limit: active off, filter on, count 0, time 0
Assoc limit: active off, count 0, time 0
Radio Management (RM) Configuration: Regular AP, Mode 1, Disabled
MCST RSCs: [0]0x0 [1]0x0 [2]0x0 [3]0x0 [4]0x0 [5]0x0 [6]0x0 [7]0x0 [8]0x0
TKIP Cum Stats: STA MIC-L-Errs MIC-R-Errs Replay C-Measure
0000.0000.0000 00000000 00000000 00000000 00000000
AES-CCMP Cum Stats: 00000000 replays discarded
QBSS Load: 0x0, Policing Stats: Rx downgrades 0, Tx downgrades 0
Classifier Stats tx_on_up6 0, tx_on_up4 0
Configured Local Access Class Parameters
Back : cw-min 4 cw-max 10 fixed-slot 7 admission-control Off txop 0
Best : cw-min 4 cw-max 6 fixed-slot 3 admission-control Off txop 0
Video : cw-min 3 cw-max 4 fixed-slot 1 admission-control Off txop 3008
Voice : cw-min 2 cw-max 3 fixed-slot 1 admission-control Off txop 1504
Configured Cell Access Class Parameters
Back : cw-min 4 cw-max 10 fixed-slot 7 admission-control Off txop 0
Best : cw-min 4 cw-max 10 fixed-slot 3 admission-control Off txop 0
Video : cw-min 3 cw-max 4 fixed-slot 2 admission-control Off txop 3008
Voice : cw-min 2 cw-max 3 fixed-slot 2 admission-control Off txop 1504
SIP stats sip_udp_rx_pkt 0, sip_tcp_rx_pkt 0,
downlink classified_pkt 0,
uplink classified_pkt 0,
num_processed_SIP_Calls 0
Transmit queues: Limit 650 Current 0 In-Progress 0
---- Active --- In-Progress --------------- Counts --------------
Cnt Quo Bas Max Cnt Quo Bas Sent Discard Fail Retry Multi
Uplink 0 0 0 0 0 0 0 0 0 0 0 0
Voice 0 0 0 0 0 0 0 0 0 0 0 0
Video 0 0 0 0 0 0 0 0 0 0 0 0
Best 0 0 0 0 0 0 0 0 0 0 0 0
Back 0 0 0 0 0 0 0 0 0 0 0 0
BSSIDS Index Flags State Next Held Defer NonDefer Clients Tsf Dtim Txq
Driver TX blocks: in use 0, high 0, at reset 0, fail 0 drop 0
Off Channel Metrics: Timeouts - Tx 0 Beacon 0 DTIM MC Waits 0
---Clients AID VLAN Status Age Tx Mode Enc Key Rate
RxPkts KBytes Dup Dec Mic TxPkts KBytes Retry RSSI SNR
IP Address Pauses RSC
Video Report: Cnt Rate Retries/Tot
8021x auth in prog 0 allowed 0
Vlan BSSID Clients PSP Pri HT Encr Key0 Key1 Key2 Key3 SSIDs MFP
0n 0000 0 0 0 0 0 0
Protocol 55
Registers: io E8000000 mem 80000000 aux A0000000
0000 FF6A 0000 0000 0021 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0220 1A1C FFFF 0504
0000 0000 0000 0000 9936 0020 E5FF 73C9
00000000 18200340 30540041 BFFFF7FF FFFFFFEF 00000000 10840000 08008208
FFFFFDCE 00000FFF 9C6276F3 00690706 00000000 00000000 00008000 00008080
00000000 00000000 00000000 00000000 00000F7A 00000000 00000000 0000E6B4
Radio running: temp 0 C tx_power 0 bb_code 0x0
rssi_threshold 0x3E gain offset 0 platform 0
PCI sys_id: 0xA506 subsys_id 0x5500 (0x5501)
Unicast ciphers 0x0 mcast ciphers 0x0
Rid Ring:
A0000970: 01C08000 21D6A1BC * n
Rx Ring:
A0000950: 89380000 21BF493C * v, 89380000 21BF3EA8 v
A0000960: 89380000 21BF3414 v, 89380000 21BF2980 v
Tx Ring:
A0000800: 00000000 00000000 * n, 00000000 00000000 n
A0000810: 00000000 00000000 n, 00000000 00000000 n
A0000820: 00000000 00000000 n, 00000000 00000000 n
A0000830: 00000000 00000000 n, 00000000 00000000 n
A0000840: 00000000 00000000 n, 00000000 00000000 n
A0000850: 00000000 00000000 n, 00000000 00000000 n
A0000860: 00000000 00000000 n, 00000000 00000000 n
A0000870: 00000000 00000000 n, 00000000 00000000 n
A0000880: 00000000 00000000 n, 00000000 00000000 n
A0000890: 00000000 00000000 n, 00000000 00000000 n
A00008A0: 00000000 00000000 n, 00000000 00000000 n
A00008B0: 00000000 00000000 n, 00000000 00000000 n
A00008C0: 00000000 00000000 n, 00000000 00000000 n
A00008D0: 00000000 00000000 n, 00000000 00000000 n
A00008E0: 00000000 00000000 n, 00000000 00000000 n
A00008F0: 00000000 00000000 n, 00000000 00000000 n
A0000900: 00000000 00000000 n, 00000000 00000000 n
A0000910: 00000000 00000000 n, 00000000 00000000 n
A0000920: 00000000 00000000 n, 00000000 00000000 n
TxDn Ring:
A0000930: 802C0000 21D6A9C4 * v, 802C0000 21D6AAA4 v
A0000940: 802C0000 21D6AB84 v, 802C0000 21D6AC64 v
Multicast counters:
Internal MC counts:
0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0 (0) 0
(0) 0 (0) 0 (0)
-Channel Range- -------Rates------ Max Power Allowed
1 to 11 by 1 1.0 to 11.0 100 1 5 10 20 30 50 100
6.0 to 54.0 30
DOT11 Statistics (Cumulative Total/Last 5 Seconds):
RECEIVER TRANSMITTER
Host Rx K Bytes: 0 / 0 Host Tx K Bytes: 0 / 0
Unicasts Rx: 0 / 0 Unicasts Tx: 0 / 0
Unicasts to host: 0 / 0 Unicasts by host: 0 / 0
Broadcasts Rx: 0 / 0 Broadcasts Tx: 0 / 0
Beacons Rx: 0 / 0 Beacons Tx: 0 / 0
Broadcasts to host: 0 / 0 Broadcasts by host: 0 / 0
Multicasts Rx: 0 / 0 Multicasts Tx: 0 / 0
Multicasts to host: 0 / 0 Multicasts by host: 0 / 0
Mgmt Packets Rx: 0 / 0 Mgmt Packets Tx: 0 / 0
RTS received: 0 / 0 RTS transmitted: 0 / 0
Duplicate frames: 0 / 0 CTS not received: 0 / 0
CRC errors: 0 / 0 Unicast Fragments Tx: 0 / 0
WEP errors: 0 / 0 Retries: 0 / 0
Buffer full: 0 / 0 Packets one retry: 0 / 0
Host buffer full: 0 / 0 Packets > 1 retry: 0 / 0
Header CRC errors: 0 / 0 Protocol defers: 0 / 0
Invalid header: 0 / 0 Energy detect defers: 0 / 0
Length invalid: 0 / 0 Jammer detected: 0 / 0
Incomplete fragments: 0 / 0 Packets aged: 0 / 0
Rx Concats: 0 / 0 Tx Concats: 0 / 0
Multicast throttle drops: 0
Client TX pause count: 0
Media Direct Band Configuration
Unicast Video Redirect = 0
Client Min Phy Rate = 0
Max Retry Percentage = 0
Dot11 Current Video Transmission Metrics:
Arrivals:0 Q-Drops:0 Tries:0 Agg:0 Success:0 Fail:0
Dot11 5-second Video Transmission Metrics:
Arrivals:0 Tries:0 Agg:0 Success:0 Fail:0
Radio-Q-Peak:0 Video-Q-Peak:0 Video-Q-Drops:0
Delay - Tot Msec:0 10/20/40/40+ Msec:0/0/0/0
Dot11 1-second Video Transmission Metrics:
Q-util:0 max-tx-time:0 p-chan:0 p-video:0 L/r:0
Last radio reset code: 37
Radio resets - total:4 retries:0 failed:0
Reset Stats: -- Start Cnt: 1, Recovery: Cnt 0Last Ret: 200, Fails: 0, Recover
y Status: Stalled? NO, In Prog? NO
Code/Count: 37/00003 54/00001
Log Buffer:
PowerPCElvis Ethernet unit 0
PHY Hardware is Broadcom BCM5914 rev. 2 (id_register: 0x40, 0x6322)
rx_intr: 0 tx_intr: 0 mac_err_isr: 0 phy_link_isr:0
Current station address 0021.55cc.703a, default address 0021.55cc.703a
MAL register dump:
malcr 0x0007C082 0x180
malesr 0x00000000 0x181
malier 0x0000000F 0x182
maltxcasr 0x80000000 0x184
maltxcarr 0x80000000 0x185
maltxeobisr 0x00000000 0x186
maltxdeir 0x00000000 0x187
malrxcasr 0x80000000 0x190
malrxcarr 0x80000000 0x191
malrxeobisr 0x00000000 0x192
malrxdeir 0x00000000 0x193
maltxctp0r 0x01D6AEA0 0x1A0
malrxctp0r 0x01D6ADA0 0x1C0
malrcbs0 0x00000060 0x1E0
EMAC register dump:
emacmr0 0x18000000 0x00
emacmr1 0xA1788000 0x04
emactmr0 0x00000000 0x08
emactmr1 0x380F0000 0x0C
emacrmr 0x7D180000 0x10
emacisr 0x00000002 0x14
emacier 0x00000001 0x18
emaciah 0x00000021 0x1C
emacial 0x55CC703A 0x20
emacptr 0x0000FFFF 0x2C
emaclsah 0x00000000 0x50
emaclsal 0x00000000 0x54
emacipgr 0x00000004 0x58
emacstacr 0x002F8018 0x5C
emactrtr 0x18000000 0x60
emacrwmr 0x0F002000 0x64
emacoctx 0x041380E4 0x68
emacocrx 0x176FF93A 0x6C
UIC register dump:
uicsr 0x00009FB4 0xC0
uicer 0x803F0048 0xC2
uicmsr 0x00000000 0xC6
PHY register dump:
3000 782D 0040 6322 05E1 45E1 0005 2001 0000 0000 0000 0000 0000 0000 0000 0000
1000 0300 0000 0000 0200 008F 0400 0000 002F 8D1F 4400 008A 002F 0000 80A0
RX ring with 16 entries at 0x1D6ADA0, Buffer size 1524
Rxhead = 0x1D6ADF0 (10), Rxp = 0x111A11C (10)
00 pak=0x1060830 buf=0x1BF7E68 status=9C00 pak_size=0
01 pak=0x10604AC buf=0x1BF73D4 status=9C00 pak_size=0
02 pak=0x1060BB4 buf=0x1BF88FC status=9C00 pak_size=0
03 pak=0x105E88C buf=0x1BF1F34 status=9C00 pak_size=0
04 pak=0x105FA20 buf=0x1BF5418 status=9C00 pak_size=0
05 pak=0x1060128 buf=0x1BF6940 status=9C00 pak_size=0
06 pak=0x10620CC buf=0x1BFC874 status=9C00 pak_size=0
07 pak=0x105FDA4 buf=0x1BF5EAC status=9C00 pak_size=0
08 pak=0x1061640 buf=0x1BFA8B8 status=9C00 pak_size=0
09 pak=0x1062EDC buf=0x1BFF2C4 status=9C00 pak_size=0
10 pak=0x1060F38 buf=0x1BF9390 status=9C00 pak_size=0
11 pak=0x1061D48 buf=0x1BFBDE0 status=9C00 pak_size=0
12 pak=0x105E508 buf=0x1BF14A0 status=9C00 pak_size=0
13 pak=0x10627D4 buf=0x1BFDD9C status=9C00 pak_size=0
14 pak=0x10619C4 buf=0x1BFB34C status=9C00 pak_size=0
15 pak=0x10612BC buf=0x1BF9E24 status=DC00 pak_size=0
TX ring with 8 entries at 0x1D6AEA0, tx_count = 0
tx_head = 0x1D6AEB8 (3), head_txp = 0x111A15C (3)
tx_tail = 0x1D6AEB8 (3), tail_txp = 0x111A15C (3)
00 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0
01 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0
02 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0
03 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0
04 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0
05 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0
06 pak=0x0000000 buf=0x0000000 status=1400 pak_size=0
07 pak=0x0000000 buf=0x0000000 status=5400 pak_size=0
0 missed datagrams, 0 overruns
0 transmitter underruns, 0 excessive collisions
0 single collisions, 0 multiple collisions
0 dma memory errors, 0 CRC errors
0 alignment errors, 0 runts, 0 giants
emac/mal specific errors:
0 rx in range, 0 rx out range
0 mal_rx_serr, 0 mal_tx_serr
0 mal_rx_de, 0 mal_tx_de
0 emac_int
0 mal_err_isr
0 SQE errors, 0 tx CRC errors
0 output queue fail
------------------ show user ------------------
Line User Host(s) Idle Location
* 0 con 0 idle 00:00:23
Interface User Mode Idle Peer Address
------------------ show data-corruption ------------------
No data inconsistency errors have been recorded.
------------------ show file systems ------------------
File Systems:
Size(b) Free(b) Type Flags Prefixes
* 7483392 1940480 flash rw flash:
- - opaque rw bs:
7483392 1940480 unknown rw zflash:
- - opaque rw archive:
- - opaque rw system:
32768 31692 nvram rw nvram:
- - network rw tftp:
- - opaque rw null:
- - opaque ro xmodem:
- - opaque ro ymodem:
- - network rw rcp:
- - network rw ftp:
- - network rw http:
- - network rw scp:
- - network rw https:
------------------ show flash: all ------------------
Directory of flash:/
2 drwx 0 Mar 1 2002 23:49:39 +00:00 Test
3 drwx 256 Jan 1 1970 01:15:32 +00:00 c1310-k9w7-mx.124-25d.JA
152 -rwx 5 Mar 1 2002 00:15:39 +00:00 private-config
153 -rwx 1048 Mar 1 2002 00:15:39 +00:00 private-multiple-fs
154 -rwx 0 Mar 1 2002 00:00:03 +00:00 env_vars
7483392 bytes total (1940480 bytes free)
------------------ dir nvram: ------------------
Directory of nvram:/
30 -rw- 0 startup-config
31 ---- 0 private-config
1 -rw- 0 ifIndex-table
32768 bytes total (31692 bytes free)
------------------ show memory statistics ------------------
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor D2CB44 12389564 7066360 5323204 5237068 5256656
I/O 1900000 7340032 4632280 2707752 2707580 2707688
------------------ show process memory ------------------
Processor Pool Total: 12389564 Used: 7066272 Free: 5323292
I/O Pool Total: 7340032 Used: 4632268 Free: 2707764
PID TTY Allocated Freed Holding Getbufs Retbufs Process
0 0 11640760 831304 9313600 0 0 *Init*
0 0 12324 142912 12324 0 0 *Sched*
0 0 2259352 2409964 216696 4536992 4536992 *Dead*
0 0 0 0 1349016 0 0 *MallocLite*
1 0 10052 0 17064 0 0 Chunk Manager
2 0 196 196 4012 0 0 Load Meter
3 0 1034696 1032992 14768 0 0 Exec
4 0 3348 196 10164 0 0 Check heaps
5 0 0 0 7012 0 0 Pool Manager
6 0 196 196 7012 0 0 Timers
7 0 196 196 7012 0 0 AAA high-capacit
8 0 0 0 7012 0 0 AAA_SERVER_DEADT
9 0 0 0 13012 0 0 Policy Manager
10 0 0 0 25012 0 0 Crash writer
11 0 0 0 7012 0 0 RO Notify Timers
13 0 0 0 7012 0 0 ARP Input
14 0 588 0 7600 0 0 Entity MIB API
15 0 0 0 7012 0 0 HC Counter Timer
16 0 196 196 7012 0 0 GraphIt
17 0 0 0 7012 0 0 Net Input
18 0 0 0 7012 0 0 Critical Bkgnd
19 0 21704 152 13528 0 0 Net Background
20 0 68328420 68328420 13012 0 0 IDB Work
21 0 196 196 13012 0 0 Logger
22 0 92460 748 7136 0 0 TTY Background
23 0 0 0 10012 0 0 Per-Second Jobs
25 0 0 0 7012 0 0 Transport Port A
26 0 196 196 7012 0 0 Compute load avg
27 0 0 1056 7012 0 0 Per-minute Jobs
28 0 196 196 7012 0 0 Dot11 Install Mo
29 0 196 196 7012 0 0 sys monitor
30 0 196 196 7012 0 0 Power Injector m
31 0 196 196 7012 0 0 Dot11 driver
32 0 196 196 7012 0 0 Dot11 dumper
33 0 196 196 7012 0 0 Dot11 driver log
34 0 0 0 7012 0 0 Voice Metrics Ta
35 0 0 0 7012 0 0 SOAP LED Process
36 0 196 196 7012 0 0 AAA Server
37 0 0 0 7012 0 0 AAA ACCT Proc
38 0 0 0 7012 0 0 ACCT Periodic Pr
39 0 0 0 13012 0 0 IP Input
40 0 0 0 7012 0 0 ICMP event handl
42 0 196 196 7012 0 0 AAA Dictionary R
43 0 656 196 7472 0 0 CDP Protocol
44 0 0 0 7012 0 0 linktest
45 0 196 196 10012 0 0 Dot11 aaa proces
46 0 0 0 10012 0 0 pmkid
47 0 196 196 7012 0 0 Dot11 Mgmt & Ass
48 0 196 196 7012 0 0 DOT11 MFP IO
49 0 1324 196 8140 0 0 AiroIAPP Protoco
50 0 196 196 7012 0 0 Triggered events
51 0 196 196 10012 0 0 Dot11 auth Dot1x
52 0 0 0 7012 0 0 Dot11 Mac Auth
53 0 748 0 7760 0 0 Dot11CACprocess
54 0 196 196 7012 0 0 Dot1x Mgr Proces
55 0 0 0 7012 0 0 MAB Framework
56 0 0 0 7012 0 0 EAP Framework
57 0 0 0 7012 0 0 EAP Test
58 0 0 0 13012 0 0 TCP Timer
59 0 0 0 13012 0 0 TCP Protocols
60 0 0 0 7012 0 0 Socket Timers
61 0 0 0 7012 0 0 IP Traceroute
62 0 800 0 7812 0 0 L2MM
63 0 0 0 7012 0 0 MRD
64 0 0 0 7012 0 0 IGMPSN
65 0 3244 0 13256 0 0 HTTP CORE
66 0 1096 196 13912 0 0 Soap Upgrade fet
67 0 10540 196 17356 0 0 DDP
68 0 196 196 7012 0 0 WLCCP MFP AP
69 0 360 196 7176 0 0 Dot1x Supplicant
70 0 360 196 7176 0 0 Dot1x Supplicant
71 0 360 196 7176 0 0 Dot1x Supplicant
72 0 196 196 7012 0 0 LOCAL AAA
73 0 196 196 7012 0 0 AAA Cached Serve
74 0 196 196 7012 0 0 ENABLE AAA
75 0 196 196 7012 0 0 LINE AAA
76 0 66600 196 7828 0 0 TPLUS
77 0 392 196 9208 0 0 Crypto WUI
78 0 0 0 7012 0 0 EM Background Pr
79 0 0 0 13012 0 0 encrypt proc
80 0 196 196 7012 0 0 Soap Consoleless
81 0 66960 66184 13788 0 0 Crypto CA
82 0 0 0 13012 0 0 Crypto PKI-CRL
83 0 0 0 9012 0 0 Crypto SSL
84 0 0 0 7012 0 0 crypto engine pr
85 0 196 196 7012 0 0 AAA SEND STOP EV
86 0 196 196 7012 0 0 Dot11 LBS Proc
87 0 0 0 7012 0 0 Syslog Traps
88 0 196 196 7012 0 0 Radio Temperatur
89 0 3724 3724 13012 0 0 Syslog
92 0 0 32495900 13012 0 0 DHCP Client
94 0 196 196 13044 0 0 HyBridge Input P
95 0 512 348 7360 0 0 Tbridge Monitor
96 0 5412 5248 13208 0 0 Spanning Tree
97 0 33453996 3480 7012 0 0 RAC I/F Conf.
11695864 Total
------------------ show process cpu ------------------
CPU utilization for five seconds: 0%/0%; one minute: 0%; five minutes: 0%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
1 0 3 0 0.00% 0.00% 0.00% 0 Chunk Manager
2 51 550818 0 0.00% 0.00% 0.00% 0 Load Meter
3 475 565 840 0.24% 0.37% 0.10% 0 Exec
4 1253541 281225 4457 0.00% 0.05% 0.05% 0 Check heaps
5 0 1 0 0.00% 0.00% 0.00% 0 Pool Manager
6 0 2 0 0.00% 0.00% 0.00% 0 Timers
7 0 2 0 0.00% 0.00% 0.00% 0 AAA high-capacit
8 0 1 0 0.00% 0.00% 0.00% 0 AAA_SERVER_DEADT
9 0 1 0 0.00% 0.00% 0.00% 0 Policy Manager
10 0 1 0 0.00% 0.00% 0.00% 0 Crash writer
11 1 1 1000 0.00% 0.00% 0.00% 0 RO Notify Timers
13 33858 80352 421 0.00% 0.00% 0.00% 0 ARP Input
14 1 2 500 0.00% 0.00% 0.00% 0 Entity MIB API
15 22 826230 0 0.00% 0.00% 0.00% 0 HC Counter Timer
16 65 2754084 0 0.00% 0.00% 0.00% 0 GraphIt
17 0 32 0 0.00% 0.00% 0.00% 0 Net Input
18 0 1 0 0.00% 0.00% 0.00% 0 Critical Bkgnd
19 28 826252 0 0.00% 0.00% 0.00% 0 Net Background
20 51 275412 0 0.00% 0.00% 0.00% 0 IDB Work
21 1 15 66 0.00% 0.00% 0.00% 0 Logger
22 41 2754073 0 0.00% 0.00% 0.00% 0 TTY Background
23 48 2754134 0 0.00% 0.00% 0.00% 0 Per-Second Jobs
25 0 1 0 0.00% 0.00% 0.00% 0 Transport Port A
26 21 550819 0 0.00% 0.00% 0.00% 0 Compute load avg
27 319831 45903 6967 0.00% 0.01% 0.00% 0 Per-minute Jobs
28 1 183608 0 0.00% 0.00% 0.00% 0 Dot11 Install Mo
29 6334 629456 10 0.00% 0.00% 0.00% 0 sys monitor
30 97907 1924609 50 0.00% 0.00% 0.00% 0 Power Injector m
31 13808 39941824 0 0.00% 0.00% 0.00% 0 Dot11 driver
32 0 2 0 0.00% 0.00% 0.00% 0 Dot11 dumper
33 0 2 0 0.00% 0.00% 0.00% 0 Dot11 driver log
34 20 2754125 0 0.00% 0.00% 0.00% 0 Voice Metrics Ta
35 369 18360875 0 0.00% 0.00% 0.00% 0 SOAP LED Process
36 0 2 0 0.00% 0.00% 0.00% 0 AAA Server
37 0 1 0 0.00% 0.00% 0.00% 0 AAA ACCT Proc
38 0 1 0 0.00% 0.00% 0.00% 0 ACCT Periodic Pr
39 7608 124872 60 0.00% 0.00% 0.00% 0 IP Input
40 0 1 0 0.00% 0.00% 0.00% 0 ICMP event handl
42 0 2 0 0.00% 0.00% 0.00% 0 AAA Dictionary R
43 14 277776 0 0.00% 0.00% 0.00% 0 CDP Protocol
44 18 2754126 0 0.00% 0.00% 0.00% 0 linktest
45 0 2 0 0.00% 0.00% 0.00% 0 Dot11 aaa proces
46 1 45903 0 0.00% 0.00% 0.00% 0 pmkid
47 1 2 500 0.00% 0.00% 0.00% 0 Dot11 Mgmt & Ass
48 0 2 0 0.00% 0.00% 0.00% 0 DOT11 MFP IO
49 26 3298517 0 0.00% 0.00% 0.00% 0 AiroIAPP Protoco
50 0 2 0 0.00% 0.00% 0.00% 0 Triggered events
51 0 2 0 0.00% 0.00% 0.00% 0 Dot11 auth Dot1x
52 0 1 0 0.00% 0.00% 0.00% 0 Dot11 Mac Auth
53 5 550827 0 0.00% 0.00% 0.00% 0 Dot11CACprocess
54 1 2 500 0.00% 0.00% 0.00% 0 Dot1x Mgr Proces
55 0 1 0 0.00% 0.00% 0.00% 0 MAB Framework
56 0 1 0 0.00% 0.00% 0.00% 0 EAP Framework
57 0 1 0 0.00% 0.00% 0.00% 0 EAP Test
58 0 1 0 0.00% 0.00% 0.00% 0 TCP Timer
59 0 1 0 0.00% 0.00% 0.00% 0 TCP Protocols
60 0 1 0 0.00% 0.00% 0.00% 0 Socket Timers
61 0 1 0 0.00% 0.00% 0.00% 0 IP Traceroute
62 1 3 333 0.00% 0.00% 0.00% 0 L2MM
63 0 1 0 0.00% 0.00% 0.00% 0 MRD
64 3 53 56 0.00% 0.00% 0.00% 0 IGMPSN
65 0 9182 0 0.00% 0.00% 0.00% 0 HTTP CORE
66 0 2 0 0.00% 0.00% 0.00% 0 Soap Upgrade fet
67 0 2 0 0.00% 0.00% 0.00% 0 DDP
68 1 137707 0 0.00% 0.00% 0.00% 0 WLCCP MFP AP
69 0 2 0 0.00% 0.00% 0.00% 0 Dot1x Supplicant
70 1 2 500 0.00% 0.00% 0.00% 0 Dot1x Supplicant
71 1 2 500 0.00% 0.00% 0.00% 0 Dot1x Supplicant
72 0 2 0 0.00% 0.00% 0.00% 0 LOCAL AAA
73 0 2 0 0.00% 0.00% 0.00% 0 AAA Cached Serve
74 0 2 0 0.00% 0.00% 0.00% 0 ENABLE AAA
75 0 2 0 0.00% 0.00% 0.00% 0 LINE AAA
76 1 2 500 0.00% 0.00% 0.00% 0 TPLUS
77 0 3 0 0.00% 0.00% 0.00% 0 Crypto WUI
78 0 1 0 0.00% 0.00% 0.00% 0 EM Background Pr
79 0 1 0 0.00% 0.00% 0.00% 0 encrypt proc
80 0 2 0 0.00% 0.00% 0.00% 0 Soap Consoleless
81 6 4 1500 0.00% 0.00% 0.00% 0 Crypto CA
82 0 1 0 0.00% 0.00% 0.00% 0 Crypto PKI-CRL
83 0 1 0 0.00% 0.00% 0.00% 0 Crypto SSL
84 0 1 0 0.00% 0.00% 0.00% 0 crypto engine pr
85 0 2 0 0.00% 0.00% 0.00% 0 AAA SEND STOP EV
86 0 2 0 0.00% 0.00% 0.00% 0 Dot11 LBS Proc
87 0 1 0 0.00% 0.00% 0.00% 0 Syslog Traps
88 0 45904 0 0.00% 0.00% 0.00% 0 Radio Temperatur
89 1 7 142 0.00% 0.00% 0.00% 0 Syslog
92 25 2754129 0 0.00% 0.00% 0.00% 0 DHCP Client
94 4801 364480 13 0.00% 0.00% 0.00% 0 HyBridge Input P
95 56 3077274 0 0.00% 0.00% 0.00% 0 Tbridge Monitor
96 0 2 0 0.00% 0.00% 0.00% 0 Spanning Tree
97 183 5543231 0 0.00% 0.00% 0.00% 0 RAC I/F Conf.
------------------ show process cpu history ------------------
ap 09:02:23 PM Monday Apr 1 2002 UTC
11111 22222
100
90
80
70
60
50
40
30
20
10
0....5....1....1....2....2....3....3....4....4....5....5....6
0 5 0 5 0 5 0 5 0 5 0
CPU% per second (last 60 seconds)
2
100
90
80
70
60
50
40
30
20
10
0....5....1....1....2....2....3....3....4....4....5....5....6
0 5 0 5 0 5 0 5 0 5 0
CPU% per minute (last 60 minutes)
* = maximum CPU% # = average CPU%
100
90
80
70
60
50
40
30
20
10
0....5....1....1....2....2....3....3....4....4....5....5....6....6....7..
0 5 0 5 0 5 0 5 0 5 0 5 0
CPU% per hour (last 72 hours)
* = maximum CPU% # = average CPU%
------------------ show dot11 associations all-client ------------------
------------------ show wlccp ap mobility traffic ------------------
------------------ show wlccp ap mobility forwarding ------------------
------------------ show crypto key mypubkey rsa ------------------
------------------ show inventory ------------------
NAME: "BR1310", DESCR: "Cisco Aironet 1300 Series (IEEE 802.11g) Bridge"
PID: AIR-BR1310G-A-K9 , VID: V04, SN: FTX1220U0G1
------------------ Mempool statistics ------------------
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor D2CB44 12389564 7066360 5323204 5238084 5256656
I/O 1900000 7340032 4632280 2707752 2707580 2707688
-------------- Top 100 allocator pc summary -----------
Allocator PC Summary for: Processor
PC Total Count Name
0x000FD014 1591200 1768 *Packet Header*
0x0008732C 955488 14 MallocLite
0x001ABE58 710836 93 Process Stack
0x001B1188 393528 6 MallocLite
0x0005AA84 262196 1 Init
0x0030C5A0 170884 17 Flashfs Sector
0x00509580 167236 1 802.11 driver Instance
0x0050A584 159252 1 Init
0x00194E14 98616 6 TW Buckets
0x008469A8 88736 1163 Init
0x00195BEC 85640 2 pak subblock chunk
0x004340C4 77252 1 Spanning Tree Opt Port Block
0x001741BC 69524 91 Process
0x001C0B3C 65588 1 Memory RO RU Chunks
0x001C0C80 65588 1 Memory RO RU Index Chunks
0x001A64A8 65588 1 CPU RO RU Chunks
0x0011AB34 65588 1 Buffer RO RU Chunks
0x0011AB5C 65588 1 Buffer RU Notify Chunks
0x0011A844 65588 1 Buffer Display Chunks
0x0009DF8C 65588 1 Parseinfo Blocks
0x001369EC 65588 1 IDB List Element Chunks
0x0052ABEC 65588 1 dot11drvr clients
0x005491E0 65588 1 Dot11 Pmkid Record Chunks
0x005593D8 65588 1 Dot11 Mgmt Station Chunk
0x000133FC 65588 1 AAA DB Chunk
0x0017C11C 62936 228 Init
0x0048AEBC 60076 1 BTE Entries
0x0008F544 49628 3 Init
0x000DBC6C 49204 1 Exec
0x001814A8 40104 2 RMI-RO_RU Chun
0x000F5044 32824 1 Init
0x0009E004 32820 1 Parse Nodes
0x00509FD8 32820 1 dot11 call control events data
0x0055BA1C 32820 1 Dot11 Mgmt SSID Chunk
0x0055BA54 32820 1 Dot11 Mgmt SSID Config. Chunk
0x00029314 32820 1 AAA SG ID table
0x005D2F24 26716 2 dot11 auth client chunk
0x00099500 26452 1 PM Event Pool
0x0007D868 26424 6 TTY data
0x001916C4 21364 7 Keepalive
0x001C19B8 20052 1 Managed Chunk Queue Elements
0x0017FD08 20052 1 RMI-RO_RU Chunks
0x0017FD30 20052 1 RMI-RO_RG Chunks
0x0017FE4C 20052 1 RMI-RU Chunks
0x005B2244 20052 1 wlan_ip_mcast_record
0x005B2D04 20052 1 wgb_ip_mcast_record
0x000A35CC 19748 258 Parser Linkage
0x000E79AC 19732 1 Init
0x00177088 17984 91 Process Events
0x001063FC 14860 5 *Hardware IDB*
0x0030C4BC 11704 154 soap_flash init
0x007BF4D4 11676 1 DISC specific structure members
0x000E7A2C 10776 86 Init
0x0036DA6C 10432 2 dhcpc_lq_chunk
0x0017BCD0 10260 5 Reg Function 1
0x0016DDDC 10052 1 List Elements
0x00179694 10052 1 Watched Queue
0x001796BC 10052 1 Watched Boolean
0x001796E4 10052 1 Watched Bitfield
0x0017FEB4 10052 1 RMI-RG Chunks
0x0016C940 10052 1 List Elements
0x00103018 10052 1 Packet Elements Cache
0x00103044 10052 1 Packet Elements
0x002C689C 10052 1 Pathents for parsing
0x002C68C4 10052 1 TTY Pathents for parsing
0x00311B84 10052 1 Flashfs Sector Pointers
0x0030B668 10052 1 Flashfs Sector
0x0052AC7C 10052 1 dot11 cc info
0x0015480C 10052 1 AAA chunk
0x001C1D28 10052 1 List Elements
0x005B14F0 10052 1 wlan_ip_mcast_host
0x005B152C 10052 1 wlan_ip_mcast_domain
0x002A5390 10052 1 IPTRACE probe chunks
0x003C00C4 10052 1 SNMP SMALL CHUNK
0x003C010C 10052 1 SNMP MEDIUM CHUNK
0x002BE794 10052 1 Time Range Entry Chunks
0x000E700C 10052 1 Init
0x000E7044 10052 1 Init
0x005D7728 10052 1 DDP UDP tx Chunk
0x00361E40 9652 1 NET ACCT LISTS
0x00361E7C 9652 1 SYS ACCT LISTS
0x0003964C 8852 1 PPP ACC LISTS
0x00799E10 8448 88 *Init*
0x0017BC3C 8208 4 Reg Function 1
0x0088D140 8128 1 Crypto Engine Object Table
0x0007C064 8080 102 NameDB String
0x00039688 8052 1 NET AUTHOR LISTS
0x000A4240 7668 71 Parser Mode
0x005510A0 7312 1 Dot11 Mgmt Client Send Fail Event Chunk
0x005510D8 7312 1 Dot11 Mgmt Client Not Found Event Chunk
0x00106418 6700 5 *Software IDB*
0x0039DEC0 6488 1 Init
0x00705468 6300 3 Init
0x007054B4 6300 3 Init
0x007054E8 6300 3 Init
0x000A42CC 5444 71 Parser Mode Q2
0x000A42A8 5404 71 Parser Mode Q1
0x000A6C2C 5368 10 Chain Cache No
0x0016DE18 5052 1 List Headers
0x00179734 5052 1 Watcher Info
Allocator PC Summary for: I/O
PC Total Count Name
0x000FD064 4628876 1767 *Packet Data*
0x007B8DD0 2056 1 Init
0x007BA3BC 896 4 Init
0x005C1480 296 2 Init
------------------ show region ------------------
Region Manager:
Start End Size(b) Class Media Name
0x00000000 0x018FD7FF 26204160 Local R/W main
0x00003000 0x0089B823 9013284 IText R/W main:text
0x0089B840 0x00B8E17F 3090752 IData R/W main:data
0x00B8E180 0x00D2CB3F 1698240 IBss R/W main:bss
0x00D2CB44 0x018FD7FF 12389564 Local R/W main:heap
0x01900000 0x01FFFFFF 7340032 Iomem R/W iomem
Free Region Manager:
Start End Size(b) Class Media Name
------------------ show buffers ------------------
Buffer elements:
1119 in free list (1119 max allowed)
849266 hits, 0 misses, 619 created
Publi -
AP1252AG Power Injector - Ethernet Failure Radios still UP
Hi All,
please can somebody help?
I was doing a simple test today with 2 AP's, both AP's are powered by Cisco Power Injectors. I was expecting that my client would simply switch association from one access point to another if I disconnected the ethernet cable of one AP (breaking the network connection). What I noticed was that the Radio's of the AP which has it's ethernet cable unplugged were still authenicating clients. i.e clients were authenticaing with radios of AP which has it ethernet interface down.
Please can somebody tell me whether there is a command that will cause the radios to shutdown in case of ethernet failure, thus forcing clients to try to find another AP
RegardsHi,
Thanks for reading my post, I've found the command, which shuts down the radio if the ethernet goes down:
ap(config)#interface dot11Radio 0
ap(config-if)#station-role root fallback shutdown
ap(config-if)#end
ap#
ap#
ap#sh ip inter brie
Interface IP-Address OK? Method Status Protocol
BVI1 XXX.XXX.XXX.XX YES NVRAM up up
Dot11Radio0 unassigned YES NVRAM up up
Dot11Radio1 unassigned YES NVRAM administratively down down
GigabitEthernet0 unassigned YES NVRAM up up
ap#
Unplug the Ethernet cable from Switch
*Mar 1 00:08:28.523: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:08:28.527: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:08:29.527: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:08:30.527: %LINK-3-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:08:31.527: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
ap#
ap#sh ip inter brie
Interface IP-Address OK? Method Status Protocol
BVI1 XXX.XXX.XXX.XX YES NVRAM down down
Dot11Radio0 unassigned YES NVRAM reset down
Dot11Radio1 unassigned YES NVRAM administratively down down
GigabitEthernet0 unassigned YES NVRAM up down
ap#
Plug Ethernet Cable back into Switch
*Mar 1 00:08:56.975: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:08:56.983: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:08:57.979: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:08:58.983: %LINK-3-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:08:59.983: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
ap#sh ip inter brie
Interface IP-Address OK? Method Status Protocol
BVI1 XXX.XXX.XXX.XX YES NVRAM up up
Dot11Radio0 unassigned YES NVRAM up up
Dot11Radio1 unassigned YES NVRAM administratively down down
GigabitEthernet0 unassigned YES NVRAM up up
ap#
This Works....
Regards -
Power Consumption of Power Injector
Hi,
Hope you can assist me. My customer requested me to calculate the power consumption required for the installation of one unit of AP 1510 using the following power injector, part no: Power Injector (AIR-PWRINJ1500). He would like to know the cost required so that the building management can include the necessary cost of the implementation of the device.
From my initial research, I notice the following input power requirement
Power Injector
Input: 100-240V ~ 1.5A (300Watt)
Output: 48V ~ 1.2A (58Watt)
Power consumption: 240*1.5 = 360 W = 0.36KW
Assuming cost per unit is 0.39 cent
Amount required per hour = 0.36*0.39 = 0.14 cent
Amount required per day = 0.14*24 = 3.36 dollar
Is my calculation correct?
Thanks.
DelonHI ,
See the table 15 :
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/data_sheet_c78-584733.html
usually 3750x-48 ports switch consume average around 132 watts
see the above link ..and u can see the weaigted averga power req ....
REgards
Please rate if it helps. -
I have purchased several AIR-LAP1242AG-E-K9 but had no POE switches so I needed power injectors; we ended up purchasing AIR-PWRINJ-FIB without noticing that they were also media converters.
Is there any converter I can use to convert back to copper? I wanted to confirm this before getting to the inevitable conclusion that we need to exchange them for the AIR-PWRINJ3Hi Javier,
You may want to take a look at the following media converter:
http://www.cisco.com/en/US/prod/collateral/video/ps8806/ps8900/ps8901/product_data_sheet0900aecd806c4982.pdf
Hope this helps,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
Aironet 1310, power injector and poe cable
Hello,
Can the power injector delivered with aironet 1310 be supplied by a PoE RJ45 cable rather than the traditionnel DC adapter?
The problem is, i thought Aironet 1310 was PoE. Which means it can be power supplied by a rj45 cable.
But, when i openned my brand new 1310 box, i realized that 1st, it needs that Power Injector to work and that 2nd, Power injector needs a power supply...
Usually when i buy a PoE access point, I just plug in my PoE rj45 cable and its power supplied :)
Anyway, i hope there's an issue for this because where the 1310 should be placed, there's only a PoE rj45 cable arriving.
Thanks in advance,
lachapelleHi lachapelle,
Sadly the 1310 cannot be powered by PoE ,but, the Power Injector can be up to 100 meters away from the unit.
Dual coaxial cable to run from the power injector to the 1300. See attached notes:
Cisco Aironet 1300 Series
Cisco Aironet 1300 Series Access Point/Bridge Power Injector
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable?enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Ethernet Ports
The access point/bridge dual-coax Ethernet ports consists of a pair of 75-ohm F-type connectors, linking the unit to your 100BASE-T Ethernet LAN through the power injector. The dual-coax cables are used to send and receive Ethernet data and to supply inline 48-VDC power from the power injector to the access point/bridge.
Power
The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_book09186a00804d3095.html
AIR-PWRINJ-BLR2
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html
Hope this helps!
Rob -
Power-On state of digital outputs in 6713 card
The card manual says Power-on state of DIO is Input(high-Z). However after I power up the computer before I ryn my software, I measure DIO outputs as high TTL voltage(about +5V). Similar situation happens with GPCTR0_OUT which I use for a pulse train. Again before any configuration when I expect low TTL output, the high level comes up. When I run my software I have all this configured properly. But this unexpected power-on status does not look right , also it is not compatible with my external hardware and makes it possible damage.
The default state for the DIO and counter out lines is a internal 50 kOhm resistor pulled up to 5V. This is listed in the user manuals. However, you can change the default state of any of these lines by adding a external pull-down resistor. Here is a KB that discusses this in more detail.
http://digital.ni.com/public.nsf/websearch/008995633E33E47486256B5F00034436?OpenDocument
I hope this helps.
Joshua -
1300 Series Access Point/Bridge Power Injector - Using power over ethernet
Can I use power over ethernet to supply the Injector with power?
Hi Mikael,
Sorry, this will not work. Have a look at these specs;
1300 Series Power
Power
The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.
The power injector is available in two models:
Cisco Aironet Power Injector LR2 standard version (included with the access point/bridge)
48-VDC input power
Uses the 48-VDC power module (included with the access point/bridge)
Cisco Aironet Power Injector LR2T optional transportation version
12- to 40-VDC input power
Note The power injector and the power module must not be placed in an outdoor unprotected environment. The power module must not be placed in a building's environmental air space, such as above a suspended ceiling.
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_chapter09186a008079b93b.html#wp1051840
Dual coaxial cable to run from the power injector to the 1300. See attached notes:
Cisco Aironet 1300 Series
Cisco Aironet 1300 Series Access Point/Bridge Power Injector
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable?enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Ethernet Ports
The access point/bridge dual-coax Ethernet ports consists of a pair of 75-ohm F-type connectors, linking the unit to your 100BASE-T Ethernet LAN through the power injector. The dual-coax cables are used to send and receive Ethernet data and to supply inline 48-VDC power from the power injector to the access point/bridge.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_book09186a00804d3095.html
AIR-PWRINJ-BLR2
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html
Hope this helps!
Rob -
Power Injector for Airport Extreme (Generation 5)
Hello.
Is there any support for using Power Injector (PoE) instead of the supplied power apdater to run Airport Extreme.
Cheers
Mr AproSorry, but Power over Ethernet is not supported on the AirPort Extreme.
-
Power Injector for 1310 wireless bridge
Hello,
We have a failed power injector on a 1310 series bridge. Will the "Power Injector LR" from a 1410 series bridge work on the 1310?
Thank you,
MattNo... both have a different output and should not be used interchangeably.
See this post by Surendra:
https://supportforums.cisco.com/message/3280050#3280050
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
Can not find Power Injector for wap2000.
Hello everybody.
Not long ago i was bought Cisco wap2000 access point for small business, and now the problem is to find power injector for this device.
I am already tried to use AIR-PWRINJ3, but access point did't turn on.
Why?
Which power injector should i use with this device?
Thanks.
PS.
Please, don't judge me, for my bad english. =)I would think that:
http://www.google.com/products/catalog?hl=en&biw=1168&bih=723&q=cisco+AIR-PWRINJ4%3D&um=1&ie=UTF-8&tbm=shop&cid=1924636136971570879&sa=X&ei=oGf_TcGfHoy40AH2xLDjAg&ved=0CIMBEPICMAU#
should work, Cisco should be able to confirm . . .
If not then I would try:
http://www.versatek.com/products/cisco_power_injector.htm?_kk=cisco%20PoE%20injector&_kt=90d05a21-707c-456a-8dc9-c92b9a334f1b&gclid=CPnpz-nlxKkCFUqM5godGH4Mmw
I know your original post was in January and you may have created that 100m power cord but I hope this helps others. -
WAP4410N - Will the PWRINJ4 power injector be compatible
Good day,
We have purchased a few WAP4410N access points at some of our small remote offices. The switches in the offices is not PoE capable, therefore we require power injectors. I have a PWRINJ3 injector in my posession, so have tested it with the AP's, but it does not seem to be compatible.
Before I purchase power injectors, I would like to know whether the PWRINJ4 will be compatible, if not, which power injector does Cisco recommend for the WAP4410N.
Kind Regards
AdrianHi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
We get this question a lot with our wireless AP's. Currently there is not an Injector that we recommend with our wireless AP's. Your best bet is to purchase a small unmanaged PoE switch for all of your AP's. I would suggest something like a SG-200-08P.
http://www.cisco.com/en/US/products/ps11229/prod_models_comparison.html
Cisco currently has an injector in works for our small business devices, but the timeframe for availability is unknown at this time.
There are some 3rd party infectoers on the market(including Cisco Enterprise injectors that could possibly work, however since we do not support them and they have not been certified for use with our small business devices we can not recommend or support them. (even though some customers have been lucky enough to get them to work)
Hope this helps, please let me know if I can answer any other questions.
Thanks
Eric Moyers
Cisco Network Support Engineer
SBSC Wireless and Surveillance SME
CCNA, CCNA-Wireless
1-866-606-1866 -
Cisco Power Injector - AIR-PWRINJ4
Hi there, I have a quick question about Cisco Power Injector.
we bought a number of Air-PWRINJ4 year ago, mainly for extending the power via Cat5 ethernet cable to AP 1225 in warehouse. the output is 56V 0.55A.
Now I have a couple of spare left, my quesiton is if it is OK to directly power 3502I AP, which requires imput 48V and .35A. from the bag of Air-PWRINJ4, it indecates that the 3500 series is also included.HI Scott, thanks for the reply, I have tested it works fine, but what will happen if we plan to use it for long run, does it will demage the APs? in the packaging bag it says: Power Injector - AP 1140/1250/1260/3500 Series - SPARE
on the site I am setting up the AP, there is no POE switch and I don't have adapter with exact output for APs.
Maybe you are looking for
-
ODI Scenario fails to extract data from Essbase
Hello, We are running ODI 10.1.3.6.0. When we run a scenario it fails when trying to export data from Essbase. I am pretty new to ODI and can't seem to find the information to fix this error. Thanks in advance for your help. Below is the error. org.a
-
Hello everyone, We have a very simple scenarion RFC -> XI -> JDBC. When the rfc is executed in the backend R/3 i can see the xml in sxmb_moni BUT the payload is empty. The remote function uses TABLE instead of IMPORT / EXPORT parameters. Any ideas? T
-
I bought my apple tv in USA and use in Indonesia, but I can't set date and time.
How to set date and time so I can Home sharing with apple tv .
-
MODE_FIND, button FIND, Ctrl-F, SEARCH
to the moment to make click in the button to FIND, automatically the texts of the fields should be cleaned. ? it doesn't work me, some idea. thanks. Jorge Benitez Axis Group
-
Blue Screen in CS5 Installation
Hi, I was trying to install the Photoshop CS5 trial, and no matter what I do, at around 18% I get a BSD. I've tried to install at least 5 times, and it's the same result everytime. Please help.