Power jack not working

My battery won't charge and the power jack doesn't seem to work. The laptop gets no power whenever the charger is plugged in.
I checked the jack with the multimeter and it the two red wires recieve power.

did you try a power cycle, as described in that article?
You could possibly have a bad battery as well.  If possible, and the store is willing, try swapping in another battery at Best Buy, or using another power adapter with your battery to see if you can isolate the issue. 
when performing the steps in the article, after uninstalling the Microsoft ACPI Compliant Control Method Battery driver, reboot and the computer should detect the missing driver and reinstall automatically.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Similar Messages

  • Mic Jack not working after Driver Update, Console unavailable, can't install

    LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
    I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
    I'm running on Windows Vista Ultimate, 64-bit
    My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
    I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
    Any help would be greatly appreciated.
    I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

    Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

  • My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Power button not working

    iPopd touch 4th generation sleep/power button not working.
    Any ideas? how long is warranty?

    The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
    Apple - Support - Check Your Service and Support Coverage
    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • HT4061 i left my ipad 3 as i will go to work when i came back from work and able to used my ipad power is not working and the ipad is warm i didnt left the ipad charging.... so i tried to again and outting it on its not working now. pls do the needful

    I bought new ipad3 last week yesterday I left it on bed as I will go to work. When I came back and able to used it power is not working and feel the ipad get warm and feel let it cool down and try it again its not working at all. Kindly pls do the needful.  thanks a lot

    I bought new ipad3 last week yesterday I left it on bed as I will go to work. When I came back and able to used it power is not working and feel the ipad get warm and feel let it cool down and try it again its not working at all. Kindly pls do the needful.  thanks a lot

  • Dv6 power led not working

    Hi everybody!
    Today, I changed the fan in my Pavilion dv6-6001eh (the original stop working). After I assembly, the power led not working anymore. I check the cable, but that's ok. Otherwise the power button working. The second power led in the right side next to USB, also not working.
    Why? Maybe pressed hotkey?
    Thank you.

    Any advice?

  • HT1688 Power button not working

    Power button not working on iPhone 5

    This is a defect on iPhone 5 power button that wears out in about 13-14 months of usage just after you go out of warranty. Apple is aware of this issue but chooses not to accept this as a defect. I asked the Genius bar guy and they told me this is a common case recently and costs $269 to replace your phone. There is no repair option. I am very mad and believe Apple needs to take action or will lose their customers. All iPhone 5 owners that I know started having this problem in the month of 13 -14.
    I believe if the numbers go high, Apple may start a recall program. Please encourage anyone with this problem to post here. $700 phone should not wear out this soon. Apparently the part is defective on almost all iPhone 5 devices.
    Other threads about this:
    https://discussions.apple.com/message/23797113#23797113
    https://discussions.apple.com/message/23258974#23258974

  • Bootcamp 5.1.5621 - power saving not working

    I've this mac: iMac 27 - mid 2010 - 11.3 : S/N CK0390HUDNR - Boot Rom IM112.0057.B01 - EFI 1.8 SMC 1.59F2
    With latest bootcamp, power saving not working !
    I enable the display power off after 10 minuts
    Display power off BUT there's no way to power on !
    Apple... any help ?? (hoping some apple tech looking discussions..)
    Regards
    Mauro

    look on the page
    it list which macs the zip support
    if yours in not on the list use
    is it on the list? Boot Camp Support Software 5.1.5621
    or is it on this list Boot Camp Support Software 5.1.5640

  • Headphone jack not working on new Macbook Pro what is causing this?

    My 17 inch Macbook Pro is less than two weeks old. The headphone jack does not recognize the headphones about half the time. This occurs with several pairs of headphones and yes, they are ther right size. This is really frustrating on a brand new 3500 dollar machine. What is causing this? It almost seems as if the headphones cannot make contact due to the fact that the connection is too far recessed. I don't live near an Apple store so dealing with this is going to be a P.I.T.A. Anyone have any ideas on how I might fix this issue? Thanks!

    Hi, and thanks for your reply. I didn't have a red light emitting from the jack. I had already checked in the sound preferences to make sure the settings were correct. The headphones were not being recognized. This was not working with several differing sets of headphones. I made a phone appt. with Applecare. The laptop PRAM was reset and it works. There is still a bit of a delay when I plug in the headphones before they are recognized and I do feel the port is just a bit "off" as the no headphones plug all the way in. They seem to just sit almost flush but, not quite. However, resetting it resolved the issue to a satifactory level. Applecare said the issue was that not enough power was getting to that function on my laptop. They gave me the case number and I can use it if I have any further problem when I take the laptop in with me to any Apple service center. I was quite satisfied with how this was handled by Apple and if I have anymore issues will follow up.
    I love  this laptop but, even though this is working now I do feel that port is somewhat recessed a bit much.
    I also want to add that this is my first Mac and despite having had this issue I was extremely impressed with the Applecare call that I got to help resolve this. One of the reasons I went with a Mac was the reputation for service Apple has. I was fed up with Sony to the hilt. I was glad I went with this Mac despite the headphone issue because had I still been with Sony, I'd have been give a major run around to deal with this issue. So far, Apple has tried everything possible to help me with this and assured me should I have any further issue they will immediately resolve it or give me a new machine. WAY better than dealing with Sony! I do not regret going with this MAC headphone issue or not!

  • Power button not working headphones not being detected

    have a sony xperia  z tablet, power button has stopped working  and  the headset is not being detected by the headphone jack,
    really annoying i ahve tried resetting and that didnt fix the problem, i tried restorign but cant because the power button doesnt work to shut it down!
    only a couple of months old - need sony to fix the problem, i use it  for work and i need it working 100%! please respond  sony - dont depend on other users to fix your issues also  you have shut down most of your stores in ireland which does not help matters.

    Hi johnboyire,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    With the information supplied, unfortunately if you have performed a software reset and repair on the device then this may be related to hardware, I can only suggest that you contact Sony Mobile within your region and advise them accordingly.
    They will be able to help. Please use the link below to find there contact details.
    http://www.sonymobile.com/global-en/support/contact-us/
    I apologize for any inconvenience this may cause.
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Headphone jack not working

    Have had external speakers connected to headphone jack for over a year now, worked flawlessly. 
    Upgraded to Lion one month ago.
    Unplugged cord going to external speakers to plug in some headphones.  Headphones worked fine.  Unplugged headphones, plugged in external speakers (back to orignal setup.)
    There is no signal to external speakers now.  I've tested them with an iPod, the cord and speakers work fine when connected to any other device.  The speakers will not work when connected to my iMac.
    I've checked the Audio Out in Settings.  When I connect the speakers, it switches from internal speakers to digital out.
    Any ideas or does anyone know about how much will this cost me to fix?  My warranty expired in Sept. 
    Thanks.

    Try doing a SMC reset and PRAM reset, it's possible you may need to do each reset 2x.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Power button not working like it should...

    When booting up, I have to press power button several times. Finally, when it does come on (Pavilion dv6Notebook), the fan runs quite a bit. I am worried my hard drive is about to go. Any tips?

    Try a soft reset and see what happens.
    If the power button is not working, here is a link for a program that remaps the power button on your TX so you can hard reset and power off.
    There is a program called PowerBtn 2.0. This allows you to turn off the device when the power button does not work. (Thanks to Computerwiz for the info.)
    Click on the following link for the website.
    http://www.canuck-software.ca/
    For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
    http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • IPod touch 5th gen. Home button stuck and power button not working! Please help!

    I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Power button not working in Ideapad Flex14

    power button of Ideapad Flex14 is not working, i have to boot using the Novo button.
    the Volume Buttons on the side of the laptop also doesnot work.
    the Windows button the Screen (the windows hardware button on the display) also doesnt work.

    hi bundela,
    Welcome to the Lenovo Forums.
    Just to verify, is the power / volume / Windows button sunk?
    If not, it's possible that the Function Board / Win8 Button Board is malfunctioning and you may need to contact Lenovo for service.
    - LInk to picture
    - Link to picture
    Toll Free No.: 1800-3000-5366  / 1800-419-7555
    Hours of operation: 9AM - 9PM  / Monday - Saturday
    Hope you get the computer fixed soon.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for