Power light off, doesn't want to go on!

My ipod shuffle doesn't want to turn on, I tried to charge it for my whole sleep and it still hasn't turned on. I downloaded the updater and itunes again, and it seems fine when its plugged in the computer. The light is solid orang when is charging but when I take it out and switch the power switch, it does no want to turn on. Any help?

Does the status light ever turn solid green to indicate charging is completed?
What does the Battery Check light show when you've unplugged it?
What happens when you turn it on? When you press Play? Do any lights come on momentarily? Does anything else happen?

Similar Messages

My power mac G5 doesn't want to import my contacts & calender from my iPhone

my recently purchased (but older) power mac G5 doesn't want to import my contacts & calender from my iPhone. it syncs but doesn't bring in my info.
any tips for me?

What version of iTunes is it running?
Allan

Repaired cfp-421 relay boards not working in a cfp-2000 System - power light off

Hi, we are using a cfp-2000 as a control system for various biology related experiments and prototypes.
The first configuration was controlling valves & pumps. I recently took that configuration apart after it had been sitting unused for a while and started to re-configure for a different application to control lights. I had trouble right off the bat, couldn't talk to the cfp-2000 controller. I sent it in for repair\replace and then went through a little work to re-setup in MAX. I got the IP connection working and I can turn on\off the leds on the cfp-2000.
Then I found that the three cfp-421 relay boards were not working. So I sent them in for repair. They came back but when I add them to the Remote System in MAX, I can't communicate with them. There is a message indicating that they are not connected (I don't have the exact wording but can get it if that will help). The Ready indicator is on at the cfp-421 modules but the Power indicator is off. I tried all three returned modules individually with no luck.
Any help is appreciated. We have spent quite a lot of money on repairs and have fallen behind on the project.
Thank you. Kevin

Thanks for responding.
MAX version 3.1.0.3021
Fieldpoint drivers 5.02
The messages are "The module or item addressed does not exist" and "The device is offline. Make sure the device is connected and its power is on".
If I reset the cfp-2000, all relays activate on the cfp-421 (the eight indicator lamps light) for a few seconds and then go off.
I wonder if something is broken in the backplane because the cfp-421
power light is off.

Problem with led lights. power light off and battey light on all the time

I have a lenovo IdeaPad U310 Touch model 20222. Runs with Windows 8.
I had this laptop for just 7 months and I've been having some problems with the led lights.
The battery light is always ON (white light) even when the laptop is shutted down (start-power-shut down). Is not plugged in to the wall and still on.
The power light is always OFF (no light), even when the laptop is on and running.
how can i solve this?

can you tell me when the issue started to persist?
since you got it or after using for couple of months?

Last night I went to sleep, and when I woke up, my iPhone was just turned off and it doesn't want to get any power.

My iPhone doesn't want to get any power; it was perfectly normal, and last night it just turned off by it self with 43% of battery.

Plug iPhone in with Wall Charger for 10 minutes, iPhone may turn ON itself. If not on, then keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart, may take around 20 seconds of holding both buttons.

X205-S7483 Won't Boot, Power Light on, Fans Off, HDD Off, Screen Black, CD Drive doesn't open.

I gave my Toshiba X205-S7483 to my brother to use and about a year ago I was told it wasn't working anymore. He says it was his son who was about 3 at the time who broke it so I don't know what was done. I don't notice anything obvious. I couldn't work on it at the time and a friend of my mom offered to take a look at it. This guy must have been after something else because he took it apart and gave me back a bag of parts. I have to laugh at bs like that because life is too short. So the laptop stayed as a bag of parts for about a year. Sad I know. Reminds me of the old Pixar movie about the sad little Lamp and toaster. Anyways, I decided to make an effort to bring this baby back to life. I took the time and put it back together. The problem is still there but I believe everything is there and I didn't break anything else. I have been reading around in the forums and the only other posts I have found refer to a situation where the CD drive works, the fans spin and the Hard drive fire up. In some the computer doesn't post. However in my situation I have a power light which leads me to believe the MotherBoard has power but I don't have anything else really. The battery light and charge lights are working as well. I used a multi meter to verify proper voltage at the charger output. I have yet to pull it back apart enough to test voltages on the motherboard. If anyone has any advice on what to look at specifically that would be awesome. I plan on checking for a fuse around the power supply. Only other thought is to buy another board. I would like to fix this if I can. I like to tinker so I'm in no hurry.

Have you tried running it on an external monitor? If the lights work, fan spins, etc, but you have no display, even with an external monitor, it's either a video card or motherboard issue.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

DV-6117dx - power light steadily blinking off-and-on and laptop won't work

A little background:
A couple of days ago, I shut down my computer because it was a bit slow (nothing new installed beforehand). Upon a restart the next morning, I got a "log on initialization" error (with the laptop screen not working and being able to see the error message on an external monitor only). Too many hours with Google basically says the only real way around this is to reinstall the system. Fine. I tried the minimized image recovery twice - error both times. Finally, I tried the full factory reset. That worked. After the reset, however, came an endless series of issues.
- First reboot, keyboard and touchpad doesn't work so had to plug in external versions. Moreover, the native monitor doesn't work so had to plug in my TV. But the set-up for Windows did finish. Once on the desktop, I tried to access the Window monitor/screen resolution menu to get image back onto the laptop. Laptop beeped once and shut itself down with the power light (on the power button) steadily blinking but power button is nonresponsive otherwise.
- Tried a BIOS reset and got the laptop to power up. Went into safe mode with networking. Everything seems to work fine. Restarted into normal mode (shut down then powered up, actually). Boots into Windows on the native screen. Went into Windows Update and that caused the machine to again beep and shut itself down.
- After a minute or two of steady blinking from the power button light, laptop powered on and looked like it went into hibernation instead of random shutdown. Since the dialogue was still showing, decided to try Windows Update again. Same result as last time with the beeping, random shutdown, and steady blinking. This time, though, the machine hasn't tried to restart itself.
At this point, short of buying a new machine, is there anything I can do? I do have access to a CD that I'll try but want that to be the last resort since it means losing the recovery partition. Besides, with the recovery partition working well (keyboard, touchpad, native screen, etc. all worked beautifully dring that process), signs seems to point to some odd hardware issue.

I've run the full battery of tests allowed by my limited access. The only issue I've run into is concerning the BIOS, wherein it gave me a message about not being able to update/rollback due to not being able to read the BIOS image. Tried flashing it twice but failed both times. There appears to be some news on this particular front in that it might indicate an issue with my trying to restore the system so many times and confusing the BIOS instead of just some catastrophic failure.
In other news, I did get into the BIOS menu and reset to factory default. For whatever reason, that allowed me get the minimized image recovery to work whereas it never did before. Performed the MIR. All went fine until just now when I tried to restart the system (after a massive Windows update).
Upon reloading Windows, I got the same error that started this mess - Logon Process Initialization Error. Considering that an MIR is a pretty clean install and I only installed the essential Windows updates, I'm at a huge loss as to where this error is coming from.
In any event, since there was no way to shut down the system, I had to do a hard shut down. There was a few minutes of waiting because, now, my power button is no longer functioning as it should - as in, it seems to only power on the laptop at my prompting when it deems necessary, not whenever I push it.
Moreover, having just rebooted with a clean boot (disabling all but MS services), my screen and touchpad both shut down and an external monitor and mouse were required. This seems to point to a graphic card issue, but it's a weird issue since, unless I'm booting into Windows normally, I've never had an issue with either the touchpad or screen through this whole mess - even booting into Safe Mode, I only encountered this issue once and only during the midst of the mess when the laptop was undoubtedly a mess.
At this point, I'll probably try to boot into this current Windows install once or twice more before giving up and installing a fresh copy of Windows (have a CD), losing my recovery partition. Honestly, considering the loss of the power button's reliability, this seems like it's just a brick that occasionally rouses itself to be more. I'll report back with news of the clean install just in case anyone else ever runs into this special unicorn of a problem, but it appears my issue is a lost cause.
Frankly, I'm just annoyed at HP at this point. Leaving aside the fact that the warranty seems to have started over a month before the laptop got to my hands, this laptop top is just a couple of months out of warranty. I don't expect hardware manufacturers to guarantee their products for life, but the hardest thing running on this machine was Office (well, SETI@Home for the last 2 weeks). It was sitting elevated on a desk for the entirety of its life, and the CPU barely ever surpassed 50% usage. Every month or two, the vents would get compressed air sprayed in to get rid of excess dust. The only hardware change was done before the laptop ever turned on and that was a RAM upgrade. What I'm trying to say is that this was a laptop that should have given me, at the very least, more than just a few months of out warranty in terms of usage, and even if it dies, it shouldn't have been some catastrophic failure as this appears to be.
PS None of my blinking corresponds to the HP list of blink codes. It's my power button that's blinking, not my caps button light or wireless light or anything like that. And it was a steady blink off and on. Moreover, the blinking is no longer occurring since the successful MIR.

My phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

my phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

Do a reset by holding the power and home button until the apple logo appears ignoring the slide to power off (no data loss).

HT201412 My iphone 4s Doesn't respond or power on/off !!!!!!

My iphone 4s Doesn't respond or power on/off, The screen is like if it is turned off, no voice no nothing, but when I call it from another phone it doesnt say that it is off, I hear ringing but my iphone is dead with no voice or light or anything,
This happened to me before the iphone battery was 20% and after 5 min this happend, I connected it to the charger for more than half an hour but even the red battery light that indicate the recharging process didn't came up, after 3 hours when I gave up and was going to find someone to fix it I put on the charger for the last time and it WORKED so I thought maybe that was something with the battery and no problem, Than was 2 months ago, It happened again this morning I found the same thing and tried everything but nothing works .. after 3 or 4 hrs it worked again,
What is wrong with my iphone? it's new I bought it 4 months ago, never falls on the ground as I take very good care of it, what should I do?
The problem is that I Live in Kuwait, and when I searched for apple support in Kuwait I found nothing, What Do u guys think the problem is? what should I do about it ?

Maxitrol_phd wrote:
Isn't this Apples's official forum? I mean 2 days, 49 reviews but no response? What is going on?
No, it is not Apple's official forum. It is a user to user forum. If no user knows the solution then no one will post an answer. Likewise if no one understands your question.

System doesn't want to switch off(arch+notebook)

I just have installed the system. I have installed only base packages from new core image. System works good but doesn't want to switch off. After using shitdown -h now or poweroff or halt all as usally but after appearance inscription Power off nothing is going on.
If I nothing to do in the system then it swithes off good. But when I am mounting disks for example then the same problem. If I am mounting disk then unmounting all is good. With mounted disks which I didn't touch during installing system very rare swith off correctly but without them always all is good. It seems strange for me... what relationship between mounting and switching off...maybe it's just coincidence..I don't now.
Maybe something wrong with acpi? While only base-packeges are in the system. Maybe it needs other packages for notebook?
What do you think? And by the way, excuse my english)

djszapi wrote:
Welcome to the forum, Arteomp!
Does it hang up while powering off ? did you try to reinstall sysvinit-mod ? or the core packages ?
I just have reinstalled the system but in this time I have mounted disks during installing. The same situation but now system switch off never even if I unmounting disks before.
It hungs up in the last moment after all operation. After inscription Power Off in the terminal nothing to do and system hangs up.
By the way, before i used Ubuntu on this notebook and switching off was working correctly exept for stand by and hibernate
Last edited by Arteomp (2009-08-29 21:09:49)

My blackberry curve 8530 shut off and now it doesn't want to completely turn on it stays loading.

My blackberry curve 8530 shut off and now it doesn't want to completely turn on it stays loading.

Hello !
Try the following.
Just pull out the battery and reinsert it again for the POWER restart.
Once it reaches to the loading screen, just connect your device to the charger and keep it idol for 2-3hours.
At times BlackBerry Curve 8520 takes longer time then the usual for rebooting.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest their time on this Message anymore.
Thanks.

Toshiba AT 100 Tablet - Power light on but cant turn on or off

I have a tablet that has been working fine since new. Just today it went to sleep while on charge. The power light and battery lights are both on and white. I cant get the power button to turn off or back on again. the screen is black.
Does anyone have any suggestions on what might help?

Dear Sallyamci,
most certainly you either solved your problem or sent your tablet back in the past weeks. But I just wanted to tell what I experienced with the Toshiba AT200 (different tablet I know). Perhaps it is of help for someone.
What I have experienced could be described of a stall of the android OS. On a PC you would press the Reset Button or turn off/on the system. On a smartphone you might remove the accumulator to force the system being reset. This is not possible on the AT200 (and I'm unsure about the accumulator in the AT100).
My AT200 recently went black (or did not return from stand by) while in use. In my case the lights weren't on and also did not go on when connecting the power supply.
I put the tablet back into the box planning to bring it back to the dealer on the next day. In the evening I took the tablet back out the box (for one last try) just to recognize that it was warm so I thought it was still running.
The next morning the power led lit when I connected the power supply. And after some time (30min) the tablet could be switched on again.
So probably the battery drained during the night forcing the tablet to turn off (hopefully before the battery was completely empty). That led to a reset.
So one could leave the tablet alone (with no power supply connected) in such case and hope that after some hours (or at most some days if it really was in standby) the low battery forces a power off.
If there's any hard reset possibility (hidden switches) for the tablets I would be happy to know about it. Just in case this happens again.

MacBook doesn't want to turn off or logout...

I have had my macbook for a few months now (since August) and every since I've updated to Leopard my macbook sometimes doesn't want to turn off or logout. When this happens a message pops up telling me that the finder was not able to close and that I should try force quitting it. But when I force quit it nothing really happens. The bar on top of the screen and icons on the desk top go away and never reappear and when I try the power button nothing happens and I am forced to unplug and take out the battery. If anyone could help me with this issue between now and tomorrow, I would be highly appreciative.

Hi naroke!
When there are Finder related issues, often times the best (and easiest) fix is to re-install the operating system from the OS X 10.5 discs. You can try a few things before going to that point, though, so try these and it might fix the issue.
1. Reset PRAM (http://docs.info.apple.com/article.html?artnum=2238)
2. Disk Utility / Repair Disk (http://docs.info.apple.com/article.html?artnum=25751 / http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh17.html)
The next option, might make sense to do an archive & install of the operating system.

Xperia T doesn't charge when power is off

My Xperia is not charging when power is off. Normally it showed a battery when I put this phone in the dock for charging, but nothing happens. It will only charge when the power is on....What can I do to make the phone charging with power off?

http://talk.sonymobile.com/t5/Xperia-T-TX/Sony-Xperia-T-does-not-power-on-most-likely-after-low-battery/m-p/279859#M1938 http://talk.sonymobile.com/t5/Xperia-T-TX/Xperia-T-LT30p-doesn-t-turn-on-no-lights-when-plugged-no/m-p/363892/highlight/true#M6425

Mac Pro will not boot, power light flashes once and then Mac switches off

One of our Mac Pro's will not boot. When pressing the power button the light will come on briefly and the Mac will just turn off again.
I have unplugged the power cable and held down the power button for 10 seconds but this did not help.
Any suggestions for me before I call up Apple?

Most indications from flashing power lights are telling you that there is not enough working memory to start up.

Power light off, doesn't want to go on!

Similar Messages

Maybe you are looking for