Power Mac Boots to old hard drive but wont boot to install cd, Kernal

Just bought a power mac g5. The machien will start up to the install of 10.5 that the orginal owner has but will not boot into the install cd of 10.4, or 10.5. I tried reseating the ram and removing some with no help. I also tried booting from firewire and usb but the machine will not recogonize either of these when i hold down "option".....when i go to try and boot from the cd it will pop up with the string of Kernal information and tell me to reboot. but then if i take the cd out it will boot into the orginal OSX just fine...

Hello,
What are the 2z691-****-A numbers on the 10.4 & 10.5 Discs?
Are they gray machine specific discs, or the Retail versions?

Similar Messages

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or partitioning?

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or is there some way to partition? I tried doing so but received a message that there wasn't enough free space to partition. Seems like a 1TB drive should have more storage than my Ipad

Its worth confirming what free space you have on your drive:
go to: Apple Menu > About this Mac > More Info > Storage
The bar chart shows how much free space there is on the drive:
Please realise that partitioning does not create extra space so this wont help you.
If your free space is less than 20 % you should get extra storage with an external USB or Firewire drive, any make or model will work.

When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

- Have you tried the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- You can try disabling the camer notification
http://support.apple.com/kb/TS1500
- Do you have any camera, scanner or similar software installed? That may prevent iTunes from seeing the iPod.

Log and Transfer .dmg is on hard drive but wont mount

Hi All,
I have search the forums for a resolution to this but I couldn't find one. I am a home user for video so I will try to explain what happened as best I can.
I have a Canon Vixia HF20 and I created a disk image from disk utility and placed the image on a separate hard drive that I store all of the images on. I have done this numerous time with this camera in the past.
today I created an image as normal and opened up Final Cut Pro (7.0.3), opened up the log and transfer window, opened up the custom path window and double clicked on the image I created today. the first time I did this, the image opened and I was able to view the video in the log and transfer window. I just viewed the video, did not transfer or add anything to a queue. I then closed FCP.
This evening I tried the exact same thing, but the disk image will not load into FCP. I can see the .dmg on my hard drive, but when I try to open in in FCP to view the video, it will not load now.
Any suggestions? I have repaired permissions on my main hard drive thinking that might help. No go.
Thanks for any help or suggestions.
Kyle P

Thanks for your help goldfish. I have tried all of that to no avail. I think I found out that when I created the .dmg I somehow used the wrong path. Now when I open up the new .dmg it mounts and image of the entire hard drive with all of the slips except for the new one.
I have done some test video and imported them correctly, but I am now sure I used the wrong path. However, this still does not explain why I was able to see the video the first time I created it.
Anyway, I have no learned (NEVER) delete the video from the camera until you are sure you have the correct disk image. Thankfully the video was not important.
Thanks again for your help.
Kyle

Power mac g5 2nd internal hard drive

I just installed a second hard drive into my power mac g5. It is a SATA drive installation was easy but now the computer isn't recognizing the drive. I've tried to initialize it but i am now a bit stuck. The drive shows up when i open disk utility but i'm not even sure where to go from there. There is a Mac OS X server update combined but i cannot select a destination for the installation and now i'm pretty much just stuck, any ideas?

Hi
To format a drive, open Disk Utility, highlight the drive in the left-hand list, go to the Erase tab, choose a format (generally, Mac OS Extended (Journaled) is recommended), enter a name for the drive, and click Erase.
I'm not sure how the update is connected - you say you're running OS X Server?
Matt

2 Macs sharing an external hard drive, but can't see each other's music

We bought a 300GB Lacie external hard drive, and pointed each Mac's iTunes to the same folder on that drive. Then the computer asked to "consolidate," which means copying all the music on each to that shared folder--which is great so far. But then in iTunes one Mac can only see the music it copied to that folder, and the other can only see the music it copied over. If I go into Finder, I can see both of our music, but in iTunes, no. There is some purchased iTunes music, but mostly just our own CDs.
What happened, and what can I do? Thanks!

Each computer (actually, each user account on each computer) has its own iTunes Library, which is a directory file. Moving computer A's music files to the new hard drive resulted in the Library file being updated to show the new location of the music that already was part of the Library. Moving computer B's files to that same location didn't affect computer A's iTunes Library file.
On each computer, you'll need to use the Add to Library command (or do the equivalent by dragging music folders from the Finder onto the Library icon in the Source panel of iTunes) to get all the music into your Libraries.
If the Copy files to iTunes Music Folder when adding to Library preference is ON (under Advanced\General of iTunes Preferences), then when you add music to your library, those files will be copied to the location in iTunes Music Folder location, if they're not already there. You may want to check these settings to make sure you won't end up with extra copies of music files in locations you hadn't intended.
iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB Mac OS X (10.3.9)

Replaced Hp with new hard drive but now i cannot install windows 7 recovery disks

Ok, so my laptop is a hp pavilion dv4-2165dx that has a broken screen and sometime after best buy tried to fix it the hard disk blew. I bought a new hard disk and put it in the computer and i got the official recovery and installation disks for windows 7. The hard drive is recognized by the computer and does start the recovery manager but it gets to 1% and does not go further. I let it run all night and the next morning it said that the cd failed. Did it fail because i have to connect an hdmi cord to my lg tv to see anything? Or was it because of something else?
I researched and found that with a new hard drive i will have to partition it and then format it to work with windows 7.
My question is, if the computer doesnt boot or let me use windows how can i partition and format the new hard disk? I have an older hp laptop as well that works efficiently in regard to its age (7) yrs. i wonder if i can buy a usb to sata/ide cord and attach the new disk to my old laptop and partition/format it there? Idk

Hello CaptianNike, welcome to the HP Forums.
I see that you're trying to install Windows 7 on a replacement hard drive. I will try to assist you with this.
You definitely could use another computer to format and partition the drive. I'm not certain about the cables you've mentioned though (looked with goolgle and you can get usb to sata cables). If the computer is a desktop you should be able to connect it internally to just do the format/partition.
If the recovery disks worked correctly, then you should have the option to do the format and partition via Windows. This could be an indication as well that there's an issue with the disks.
Which leaves you with the option of obtaining another set of disks to try, or trying to partition first then installing. The easier would be the latter.
I hope this helps.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Any MAC genius there? I need to copy programs from my old hard drive to my new one.

Recently, I changed my hard drive because it's already broken for about 6 months. I started off fresh, no programs and files. I need some of the programs like my Photoshop CS6, I also need my Microsoft Word. And I'm coming back to school next week, and I need both of these applications. I still have my old hard drive, I can still access on my old hard drive but I have to shut off my computer. Plus my old hard drive is doing the death clicks, so I can't always carry my old one to school.
I really need the applications.
And also, I can't find my serial numbers. I don't know where the box and sticker went, and I list my email address that I used on them. Can someone please help me, I'm desperate.
Thank you in advance.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

How do I transfer data from old hard drive to new mac exactly the same as it was on my old one?

Unfortunately my 2009 iMac has been written off due to a faulty motherboard. Thankfully the company we got the mac from are providing me with a brand new one at no cost as I am under warranty. My old hard drive had many important documents and applications on it and we have requested for the old hard drive back. What I would like to know is how to I go about transferring all the stuff of my old hard drive to my new iMac? I would like everything to be set out exactly the same as it was on my old mac so basically I would like it cloned identical on my new mac from my old hard drive.
Thanks Nathan

In general, most people will recommend Carbon Copy Cloner or SuperDuper! You can find either one easily enough with a web search.
However, in your case, I imagine you are going to have a hard disk returned to you all by itself, and you will need to install it in an enclosure. Don't let that bother you as this is easy to do and the enclosures are not expensive ($40 or so).
Once that is done, I would recommend you set up your brand new Mac by answering all the questions during initial setup as usual. Be sure to use your correct Apple ID - probably the same one you used to log into this support forum. When you reach the point in which it asks you if you would like to transfer your old documents and settings, connect the old hard disk and select it as the source. It will take some time as it copies all its contents to your new Mac. All your familiar items will be exactly as they were on the failed Mac.
After that, you can use the old hard disk as a Time Machine backup. When you are satisfied everything on your new Mac is running as it should, go ahead and erase the old disk. Then, tell Time Machine to designate it as a backup, and the rest is automatic.

Old hard drive crashed, cannot get iTunes to find files

Hi,
Please help. Been working on this for weeks and can't get it right. Am at my wit's end:
Old hard drive crashed; had new one installed. Tech person was able to find my iTunes on old drive and saved to thumbdrive. Downloaded most recent software and synced iPod - it "read" some of what was on it but would not play anything. tried to consolidate libraries/import from thumbdrive, then could view my whole library, but when I try to play any song it says it cannot locate the original file - does not matter if i purchased it from iTunes or added from CD. This computer is authorized, I've tried all the other "tutorials," added files (didn't work), tried using my iPod to xfer music to new computer - didn't work. I have my old hard drive booted and ready to go, can see the files and have copied them direct from drive to drive, still didn't work (followed the directions to keep music folder organized, etc.) What am I doing wrong?? I can't use my iTunes at all - just downloaded three new songs and that's all I can play from it. iPod itself seems unaffected.
Thanks!! - [email protected]

Hi, you said you still have access to your old hard drive.
Can you move the entire itunes folder from the old to the new?
Not just the 'itunes music' folder - you need the parent folder of that.
It has an important file named itunes library.itl that holds ratings, play counts and the paths to your music files.
Copy that entire itunes folder and all its subfolders over to the new PC.
Press *and hold* the shift key while starting itunes and choose the ITL file you just copied over.

I can't transfer files from my mac to an external hard drive. what can i do?

i have tried to transfer files from my mac to my external hard drive but i just couldn't.. help me

leemamacita wrote:
i have tried to transfer files from my mac to my external hard drive but i just couldn't.. help me
More information would help. How is the external connected? Does the external appear on your Desktop? Has the external been formatted for a Mac? What method do you use to transfer files? When you try to move a file to the external, what does happen?

How to transfer history from old hard drive to new computer

So my motherboard on my old PC died. I therefore pulled the hard-drive from my old computer and patiently waited on my new toy to come in. Problem is, I didn't have a chance to do my weekly synch before my old system crashed. I'd like to get the history/favorites off of my old hard-drive, but I'm not sure how to go about it. The OS are also different - old PC was Windows 7, new is 8.1.
Suggestions?

You need the places.sqlite file to restore history.
Note that this file stores the bookmarks as well, so you will lose bookmarks that you already have created.
The file structure in Windows 8 is the same as in Windows 7 and Windows Vista.
*C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
See also:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

2007 iMac, replaced hard drive, can't recover old files from old hard drive!

So I have a 2007 intell imac, the hard drive went out, I replaced it and bought a thermalake blacx hard drive doc to get my files off the old hard drive. I run Disk Utility, it can see the old hard drive but it can't repair it or verify it. Do I need to get a third party to get the info off hte old hard drive??? HELP!!!HELP!!!!!

You could use a data recovery service but that's going to be really expensive. You could also try a data recovery software like DataRescue III http://store.apple.com/us/product/TX415LL/A/prosoft-data-rescue-3
Or DiskWarrior http://www.alsoft.com/diskwarrior/
Either might help, I prefer DiskWarrior, but it's also possible that neither will. A hard lesson learned regarding backups I suppose.

Any way to get old hard drive with winxp working on new m/b

I have moved from kt3 ultra aru 2100 to 845pe max2 fir 2.53Ghz. Is there any way to get my old hard drive running with all programs installed or do I have to format the drive and reinstall again the programs from beginning (a lot of work). Now when I connect the drive I get windows protection error.
Thanks

The best is a full clean sheet installation. Or you can attempt :
1. Use the CD and select Repair, which is actually reinstallation on the same partition.
2. put back the HDD on KT4 Ultra where it works. Goto Device Manager -> System -> Microsoft ACPI Compliant System. Uninstall it. You'll asked to restart the PC, let it restart but until the POST screen, shut the PC down, don't let it go into Windows. Put the HDD at 845PE.

Transfer files from old computer, use old hard drive?

I've just purchased new HP Pavilion p6-2120 Desktop. I need to transfer files, programs, etc from my 6 year old Dell desktop. I realize I can use Windows 7 transfer program with flash drive, transfer cable or external hard drive to move the files.
As another transfer method, can I take the old hard drive from the Dell desktop & install it in the new HP Pavilion? Is the old hard drive (80GB serialATA, 7200rpm, DIM2,XPS2) compatible with the new HP where it will even work?
Since I'm not transfering that much is it best to just purchase a Windows 7 transfer cable?
This question was solved.
View Solution.

mikesimms,
Your theory is correct. If you want all the settings, email, documents, photo's, music, and other data files, use either the Windows Easy Transfer program. It will accept an external device or use the transfer cable.
If you want only the documents, photo's, music, and other data files then you could add the XP drive to the system (temporarily use the p6-2120's DVD drive cabling). You can copy files to the new folders.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Power Mac Boots to old hard drive but wont boot to install cd, Kernal

Similar Messages

Maybe you are looking for