Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network with newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

My Power Book G3 Pismo with an Airport wireless card running Mac OS X 10.4.11 will not connect to my new Airport
Extreme Base Station using WPA Personal/WPA 2 Person encryption. The Airport firmware is version 9.52. From
posts I've read online at different places indicates the Airport card should support the WPA encryption. Perhaps the problem
is the Base Station is using a combination setting and the fault is in the base station?
Thanks for any suggestions

Perhaps an inexpensive usb wireless adapter would work as well?
This is probably the simplest way to get the G3 connected to the wireless network.
I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
The new AirPort Extreme is broadcasting a wireless signal.
A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable.
This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
I do have an old Linksys Wireless G router. I wonder if that would work?
In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

Similar Messages

My Powermac G4 AGP won't connect to a network through an airport card.

I have a powermac G4 AGP that won't connect to any networks via airport wireless card. An error message pops up on the screen after trying to connect. Displayed is "There was an error when trying to connect to the preferred network." Can anyone help me with this?

Hi Scott,
What Encryption do those Networks use... Open, WEP, WPA, WPA2?
The Original 802.11b Airport card cannot do WPA2, most will do WPA with a Firmware update, it should do WEP or Open networks.
Do any of those Routers support 802.11b/g, or just 802.11n?

MacBook Airport card has lost its IP address and won't connect to my network

The Airport card on my MacBook has lost its IP address and will not connect to my network. It worked fine until about two or three days ago. Network Diagnostics says that the Airport now has a self-assigned IP number and will not connect to the Internet. I can't find any info anywhere that tells me how to restore the IP number, and I don't get how it can have a self-assigned number and not connect. I have AT&T U-Verse, and my iMac desktop and two iPhone 4s connect with little difficulty. The MacBook is three years old, and AppleCare just expired two months ago. I'm still running 10.6.8 on both machines. I found an article saying that sometimes DHCP leases expire, but my desktop still works ifne, and I've had both connected to the same network since the same time. The artcicle said that more than one machine can share an IP address, so I wanted to try to enter the desktop IP address into the laptop, but I can't find a way to do so, either. Any thoughts?

Have you tried making a New Location for each yet? The Automatic one get confused easily.
Some "nix" to try when it happens also...
sudo ipconfig set en1 BOOTP;sudo ipconfig set en1 DHCP
sudo ifconfig en1 down;sudo ifconfig en1 up
Sometimes having an all OFF Location can help, thanks to Gnarlodious...
http://gnarlodious.com/Computer/MacOsx/WiFi

IPad and iPhone won't connect to home network with new modem

I had to replace a modem today and after finally getting my computer to connect wirelessly, now my iphone and ipad will not connect. My wifi names did not change, nor did the router - just my modem.

Thanks for the suggestion; already tried that. So I just reset the printer and, even though it already recognized my desktop and laptops, it now sees the iphone and ipad. All is well...

Multipmultiple Airport Extreme Base Stations: WDS Or "Extend Wireless Network" To Have Wired -- Wireless Bridge?

Hello there!
I've been looking for this info, but have as yet been unable to find it. Here's my scenario:
I have two Airport Extreme Base Stations (both are dual band) and 3 airport expresses. The main internet connection in my house is in one room, where I have an AEBS as the main wireless router. In another room, I have a bunch of ethernet-only devices. I'd like to use the 2nd AEBS in this room, plug the ethernet devices into it and have the 2nd AEBS act as a wired <--> wireless bridge (connected to the same wireless network as the 1st AEBS). I've attempted this via "extend a wireless network," but the ethernet devices don't get past the AEBS they're plugged into. Should I instead be implementing WDS?
I mention the airport expresses as I'd like to have airtunes & wireless signal in other areas, but would like to keep the set-up as simple as possible (i.e., not config the AXes for WDS unless it's required).
Thanks in advance for any help!

Unlike the 802.11n AirPort Express Base Station (AXn), the 802.11n AirPort Extreme Base Station (AEBSn) cannot be configured as a wireless Ethernet bridge.
However, there are at least two ways to configure it to provide wired clients access:
Connect the second AEBSn back to the first by Ethernet; reconfigure the second AEBSn as a bridge and disable its wireless radios, or
Reconfigure both AEBSns into an extended wireless network. For 802.11n AirPorts, this would be called a dynamic WDS. The AEBSn, connected to the Internet would be the "main" base station and it would only require that you enable the "Allow this network to be extended" option in the AirPort Utility. The extending AEBSn would need to be configured with the option, Wireless Mode = Extend a wireless network, enabled.
In both configurations, the second AEBSn's Ethernet ports would be enabled for wired clients.

I recently purchased the Apple Airport Extreme Base Station so that I can have wireless, my question is: so I need anything else so that my guests can have internet access via my router?

Hello Anyone and Everyone who can answer my question,
I would like to be able to offer wireless access to the internet for my guest's who use my apartment above my garage that is about 75 feet away from my house/computer. I have a MacBook Pro and have satellite internet service through an ehternet connection. I recently purchased an Apple Extreme Base Station with simultanious Dual-Band (MC34OLL/A), that is in the process of being shipped as I type, and am wondering if I need anything else to install in the apartment for the wireless to work with the Apple Extreme Base Station? Thank you for any help in this matter.
Sincerely,
Lizzy

In AirPort Utility, enable the guest network by selecting your Extreme, then the Edit button, then the Wireless tab, then check the box for "Enable Guest Network":

Can't see my Airport Extreme base station

I wanted to upgrade my Base station's security to WPA2. So I went to the Airport Admin utility - But the base station does not appear there. My base station is set to be a close hidden network so I suppose that was the reason why it didn't appear.
So I decided to reset the base station. After pressing the reset button for 10sec
I went back to my PB and noticed that my wireless network name was changed to Apple Network ###### (which indicate that the Base station reset) BUT I still can't see my base station in my Airport Admin Utility.
1. Is there another way to reset the base station? did I do it right ?
2. Is there a way to see my hidden base station in the Airport Admin Utility ?
I know that I can log to a specific address (+password) but which one
should I use ?
Thanks
Eric

If you press and release the reset button on the base station, it will restart. If you unplug the power, then plug it back in, it will reboot. Holding the reset button like you did will cause the base station to revert to factory specs, meaning that you lost all of your customizations. So you have to re-configure the base station now.
If your PowerBook was connected to your network, you should see the base station in the Admin utility. Did you check to make sure you were connected to the network before you went into the Airport Admin Utility?
Doc

Can an airport extreme base station attached to another airport extreme base station as an extender transmit a different network name and have it's own security?

Can an airport extreme base station attached to another airport extreme base station set up as an extender transmit a different network name and have it's own security?

No. The AirPort cannot extend another AirPort's wireless network and simultaneously broadcast its own wireless network.
It can however, be connected to another router (including another AirPort) by Ethernet, and then, be configured to broadcast a wireless network with another Network Name and Security Type.

Airport extreme base station detecting someone elses network but not mine.

Sorry if this subject has already been discussed but I couldn't see it anywhere.
I have an airport extreme base station set up and it works fine but this morning i noticed that I had very little signal which has never happened before so upon further investigation I noticed that my computer was hooked up to a Netgear network amd not my own usual airport "home" network.
I got my own network back again and my signal is now full strength. The worrying thing is that my computer couldn't seem to find my airport "home" network when I searched for it. I had to start again from scratch and reset it.
Is there a way I can tell my computer to use only my airport network and no other? Someone obviously has an open network nearby.
Message was edited by: lispiers

Try the steps indicated in Mac OS X 10.4 Help: Choosing preferred AirPort networks.

Wireless connection to internet with mac pro tower and airport extreme base station?

Hi, I have an airport extreme base station and a mac pro tower without a airport card. My internet wireless router is a great distance from my computer so I can't connect the base station directly to the router. I've attached the airport extreme base station to the tower via an ethernet cable, the base station seems to be wirelessly connected to the home network but the browser is showing "not connected".
Please help.
Thanks

Shouldn't the Airport base station be able to connect to it wirelessly?
It might be possible, but the Ethernet ports on the AirPort Extreme would not be enabled, even if it did connect to the Thompson' WiFi signal.
As Tesserax notes, among the Apple routers, only the 802.11n versions of the AirPort Express have the capability to "join" a wireless network with the Ethernet port being enabled.

Setting up airport extreme base station with Mac and PC

I have an '02 iBook with an airport card installed and an airport extreme base station. my roommate has a PC and has the DSL connection in her room. i want to wirelessly network my iBook via the airport base. how do i do this? (my base was given to me without any manuals/disks etc)

Your Netgear wireless router is your network's base station. Your parent's PC will not be "serving as a base station" - its presence on the network isn't at all relevant to what you want to do.
To connect your G5 to the Netgear wireless router's network - click on your Mac's Airport menu, click on the name of your Netgear wireless router's network (it will appear in the list when you click on the Airport menu), and enter the wireless network password (if applicable) when prompted by the MacOS. That's is - you are connected!

Airport Extreme base station no longer playing nice with Mac Pro

This is a strange problem...
I have an Airport Extreme base station (purchased in 2004) that I use with verizon DSL to get a wireless network going in my house, and I connect three computers wirelessly.
I have an ipod touch and toshiba PC laptop that are both able to connect to the network and run just fine. But lately (past 2 weeks or so) when I try to connect with my MacPro desktop I can go to a few sites, but after a few minutes the airport locks up. At that point none of my computers will connect and I have to unplug and then replug the airport. At that point the network will start up again and if I do not try to get on with Mac Pro then things run fine, but when I try to connect with desktop again, after another few minutes the same thing happens.
I know the problem is with the airport and my Mac Pro - I have done numerous connection experiments and have narrowed the problem down to that.
Is it possible that my MacPro might be drawing more power and causing the airport to overheat? (it is rather hot in the room with DSL connection)
Or should I accept that the current base it old, and bite the bullet and get a new base?
Any thoughts?

Could you post what you did in order to resolve the issue. I'm having a problem with the base station in that I cannot connect to the internet with my laptops (a mac and pc) while I can connect wirelessly to my network with my desktop (G4). The base station is not detected in the base statin admin utility or the aiport setup utility. If anyone else has a solution I would be much obliged to read it.
Thanks!

Printing wirelessly to MacBook Pro with Airport Extreme Base Station

I have an Airport Extreme Base Station that I used to use wirelessly until I got Verizon Fios. The Fios technicians said the base station couldn't be used and so it's been sitting unused for a few months. However, I really, really miss printing wirelessly, and was wondering if it was possible to use the Airport Extreme Base Station ONLY to print wirelessly, and not connect it any way to my internet (I don't want to mess with any of the fios stuff at all).
If it's not possible, is there any other way to print wirelessly without purchasing another product or special printer. I have a HP c4480 printer.
Thanks!

If your printer has a USB cable the easy way to go about this in my opinion is to plug that USB cable into your Extreme base station. I have the Extreme ABS that looks like a flying saucer. I plug the usb cable into the port that has the symbol that doe NOT look like this <--> rather it looks like a Saguaro cactus.
My computer then sends print documents to the Extreme via WiFi and then Extreme sends them to the printer via the USB cable.
If your Airport status is not showing in the Mac's menubar go to system Prefs/Network/Airport and check a little box so it will show up in the menu bar.
Now if your Extreme is plugged in the wall and powered up your Mac should be able to find it. Click on that menubar item for Airport and scroll down and select your Airport Extreme. I don't know for sure what its name will be. It should still be the same as it used to be when you used it last.
Now try printing a simple document. In the print dialog window you should be able to select what printer you want to use. If your new Extreme printer is listed select it. You may need to click on Print & Fax and figure out how to select it from there, and choose it to be the new default printer.
I think this info will do the job. Whenever you want to print you have to go to the Airport icon in the menubar and change your airport connection from your Verizon stuff to your Extreme. Then of course you have to change back when you are done. That is why it would be great to toss the Verizon WiFi radio out the window and just plug your Verizon modem into your Extreme WiFi radio transceiver (router). But I understand you cannot deal with that at this time.
If this does not do the job, if I have missed something, I will bet you 5 bucks that you can still figure it out if you just look at any error messages and/or look at the Print&Fax prefs and the Print dialog windows etc. and see what I may have missed. Maybe you have to go to SystemPrefs/Sharing and allow your printer to be shared. I don't think so. The way I figure any of this stuff out is to just look at stuff and think and try things and see what happens.
Your Verizon setup should be something like this.... a cable comes into your house and goes to a 'modem'. From there and ethernet cable (CAT-5 cable) goes from that modem to your Verizon router (WiFi radio transceiver).
As for getting rid of the Verizon router, when you are ready to give it a go, simply unplug the ethernet cable (it has a plug on the end that looks like the kind of plug that telephones use to plug into the wall, except it is a bit wider, but still has that same kind of snap-lock tab) that comes from the Verizon modem (the modem has the heavy round cable and probably many blinking lights) and plug it into the Extreme. Mine has an icon on the Extreme that is many dots in a circular pattern.
At this point you may have to unplug the Verizon modem form the wall AC power and the Extreme also. Then plug them back in, wait a minute, go to your Airport icon on your Mac menubar, Select Extreme and start surfing the web.
It really is that simple with a Mac. Maybe Verizon has found a way to make things difficult but my guess is no. Any password should be taken care of in your Airport Setup Utility program. It should be the same password(s) as you used before when you used your Extreme.

Using Airport Extreme Base Station As A Wireless Card?

Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station. So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Thank you in advance for any help with this.

Ernest Lohrer wrote:
Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station.
She has an "integrated" modem/router/access point.
So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Set up the AEBSn as a "bridge" and connect the G4 Mini to one of the "wired" internet connections.

Ibook G-3 with old airport card can't see New Airport Extreme Base Station

I have been trying for a week now to get my G-3 ibook set up on my Airport Extreme Network. No matter what I do, I can't sign on to the network. When I put in the password I get an error message 3151. I have no idea what this means. I have read everything, restarted base, changed network password, trashed all airport and prefs on G-3 and reinstalled. Although my network shows up in the control strip, it doesn't show in the setup assistant. Please help if you can, I'm about to go crazy! Thanks.
Power Mac G5 and ibook G3 Clamshell Mac OS X (10.4.9) ibook is running 9.2.2
Power Mac G5 and ibook G3 Clamshell Mac OS X (10.4.9) ibook is running 9.2.2
Power Mac G5 and ibook G3 Clamshell Mac OS X (10.4.9) ibook is running 9.2.2

Dear Duane, I did have 802.11b configured, but I had the WPA instead of WEP enabled. When I reconfigured my network, the clamshell was instantly able to join and use the network. I have many many questions about how to use the network to allow both computers to communicate, but I'll read up on it and I'm sure the answers will be there. You saved me $240.00 for the 1st hour and $160.00 for anything over that Techserve was going to charge me to come and set it up. I can't thank you enough. Everyone tells me not to waste money, but to save for a new ibook with System X, but I love my old clamshell and I'm going to get it a bigger hard drive so it can be upgraded to run OS X. It's the old 4 Gb one. I can't thank you enough for your solution! Now I can work on the laptop in my bedroom! I love Mac stuff and I knew the Extreme base station would work, regardless of what all the posters have been saying.
Power Mac G5 and ibook G3 Clamshell Mac OS X (10.4.10) ibook is running 9.2.2

Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network with newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

Similar Messages

Maybe you are looking for