Power mac g4 MDD put a second hard drive in it and wont boot up with it in

hi i have a second 150g hard drive i just put in my powermac and it will not boot up with it im kinda new to this which is why i bought an a MDD to **** with but i probably shouldnt have done this but i booted the computer up with out the new hard drive plugged in and then plugged it in and its just sitting their with the color wheel going i picked the harddrive up off ebay and it says it will work on a mac is their something im missing here

HI there, likely it's just the Jumper settings on the New HD, set it to Cable Select or Slave if it's in the middle of the cable & the Other one has Jumpers set to Master.

Similar Messages

  • I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it.

    I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
    Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I  desperate to get it back!
    Any help will he appreciated!

    disk0s2: I/O error.
    disk0s2: I/O error.
    The MBP's disk is damaged and requires replacement.
    Genius Bar Reservations: http://www.apple.com/retail/geniusbar/

  • Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

    Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

    Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

  • I reinstalled osx 10.8.2 from recovery disk, now verify disk says my hard drive is there but wont boot into it regardless which partition i select to boot into , everytime it boots me into the recovery, i need help!

    Mb pro running like garbage with 10.8.2 tried a reinstall of osx from recovery utility now the utility says my hard drive is ok but wont boot into it keeps booting me back into recovery tried restart option to select disk tried using the select startup disk from recovery, gives a message asking if i really want to boot to it and in that message is the only rime it shows a question mark on the drive dont know what to do cant find similar issue

    Your rushing and not making much sense.
    Your machine was running like garbage, so you tried to reinstall 10.8---did you do this or not?
    Disk Utility says your drive is ok, that's good.
    But when you boot it keeps booting Recovery HD, so perhaps the firmware has made a mistake, it can forget.
    You held the option key down to boot into Startup Manager, why didn't you select OS X for the boot volume?
    When you get into OS X you change the Startup Disk in System Preferences, that should take care of the Flashing Question mark issue.
    attemtping to ireinstall osx from recovery partition bar is full on install screen, but im now at -6hours remaining
    So now your reinstalling OS X like you set out to do before, it does take some time as it has to download from Apple's servers.
    If your Internet connection is slow and/or Wifi is slow then it will take awhile.
    So you should have the Flashing Question Mark and Reinstall Only OS X covered.
    You should be able to boot the machine, but your performance issues may be something else and still remain.
    Why is my computer slow?
    Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

    I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

    Quote from: Richard on 15-November-07, 20:33:05
    tornado2003,
    What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
    After that boot normally and install the latest nVidia ForceWare Drivers
    Take Care,
    Richard
    i guess you missed that:
    Quote from: tornado2003 on 15-November-07, 17:26:52
    ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
    ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

  • How can I access Address Book data from an older version of the application to transfer it to a newer version of Mac OS running on a second hard drive on the same MDD G4?

    I installed a hard drive from one PowerPC Dual 1.25 GHz MDD into another one with an older version of the OS X.  all my Address Book data are on the older hard drive, from which I now boot the computer.  When I launch Address Book as an app on the hard drive with the newer version of the OS, I get an error message that says I cannot run the version of Address Book from the older hard drive on the newer OS.  How can I access the data on the older hard drive version of the Address Book app so that I can transfer it to the newer version of the app on the boot drive?  The "Import" functionality will not work. I will be grateful for any help I can get.  I would also like to uninstall the older version of OS X from the older hard drive.

    Boot from the older version of OSX, then in AB use the File>Export>Export vCard after selecting all in AB.
    Then boot from the new OSx & use the new AB to import that VCF file.

  • Is it possible to model mac-mini M815 install a second hard drive?

    Hi all!
    Tell me whether, you can install a second hard drive, such as SSD or plain and you need to do?
    My model mac-mini M815 with 500GB hard drive.

    Standard Hard Drive:
    500 GB (5400 RPM)
    Int. HD Interface:
    Serial ATA (6 Gb/s) x2
    Details:
    This model also can be equipped with a 750 GB, 7200 RPM hard drive for an additional US$150. A second hard drive or SSD also can be installed, although it is not formally supported. Also see: How do you upgrade the hard drive(s) in the Aluminum "Unibody" Mac mini models? What type of hard drive(s) do they support?
    From Everymac.com.
    For the Mac Mini MC815LL of 2011.
    If this is not your model have a look here to find it and confirm what can be done.

  • In replacing a hard drive on a Mac book circa 2006, can you put too much hard drive space in and cause overheating? I've had 2 hard drives fail after installation in the past 3 weeks.

    I recently had my Mac book circa 2006 updated to OS Lion and in the process was told I needed a new hard drive. I just replaced my original hard drive 9 months ago and was told at that time not to put too large a hard drive on my laptop or it could overheat. Now I have gone through 2 hard drives in the past 3 weeks since updating to Lion both of which were a terabyte in size. The authorized repair shop that put both failed hard drives in insists that the size of the hard drive does not cause problems in the Mac book but I am wondering why 2 failed in such a short time when the smaller hard drive lasted. It was working when I took it in for the updates but their diagnotic test showed that the first replacement HD was failing. I'm not sure what to think now.

    Can I take that cloned hard drive and just plug it into my new Mac Mini and Viola I have two computers set up perfectly
    Yes.

  • Mac Mini server not showing second hard drive

    early 2009 mini server suddenly won't show the second hard drive for time machine. All I get in the system profiler is this?
    Is my hard drive toast or is there any idea out there of how to recover it?
    Thanks for the help! Running 10.6.8 server by the way.

    Maybe the connector to the HD come loose. That happend abount a month ago on my 2009 Mini

  • Mac Pro 3,1 - did my hard drive die? And what should I replace it with?

    Hi,
    I inherited my late husband's 2008 Mac Pro (3,1 model) which had 2 x 500GB hard drives in it and 6GB of RAM. I filled the remaining hard drive bays with 1TB drives (I take a lot of video so needed the extra space). The boot drive was partitioned 50/50 in Boot Camp. I've upgraded the RAM to 10GB and I am currently running Lion.
    Today, while doing something as innocuous as scrolling down a web page, the bottom half of my screen went black and the top half began flashing wildly. When it  stopped after several seconds, the mouse would not respond and I could not click on anything. If flashed a bit more, and then I had mouse control back but could not click on anything - web links, applications, finder. After waiting patiently but getting nowhere, I powered the machine down manually, and when I re-started it, it failed to boot. The chime sounded, the apple appeared, and the little revolving wheel, but at the point where the screen would normally go blue then display the desktop, it just went white. The fans spin, but otherwise it's very silent.
    I tested with a second display, got the same issue. I tried booting to recovery mode but it went back to the white screen. I could start in target mode, and there were no issues with flickering screen, so I don't think it's the graphics card. Then I tried browsing to the hard drive over the network, but it wasn't showing on the PC network page, nor could I connect to it via the home theater system, which I can normally do as the streaming app launches on start-up. I am assuming this means the drive has failed? It's the original, and we bought the machine when they were new to the market, so is a good 5 years old. It contains not only the boot drive but my documents, photos, websites, selected videos, all of which are backed up on the Time Capsule, and I was in the process of uploading to cloud backup as well (although not very far along, due to data cap and slow international upload speeds). I had no warning it was about to do this, but then I guess sometimes you don't!
    Assuming I need to replace the drive, would it be worth replacing it with an OWC Mercury Electra 480GB SSD in an Icy Dock sled? Or would that be overkill for such an old machine? Would getting a standard 7200 WD Caviar HDD or similar give me enough of a speed boost? Obviously I am rather enamoured with the idea of a blazing fast SSD but I'd have to import it (not available locally) so I don't want to shell out all that money unless it's really going to make a massive difference.
    Is there anything else I would need to know about using an SSD over a HDD? I assume I would fire it up the normal way - install it, boot from my Snow Leopard install disc (I downloaded Lion from the App Store) format it, clean install SL, then re-update to Lion, then restore my Time Machine backup? Am I likely to experience any weird issues due to it being an SSD? I see talk online of firmware problems and something called TRIM that I don't know anything about. If it's most likely that I can install it and rock on as normal, then I'm pretty keen, but if there's a reasonable probability of it being temperamental, I probably wouldn't be willing to deal with that (and therefore go the HDD route instead). Therefore I am very keen to hear people's opinions and experiences.
    Sorry for the terribly long ramble. The more I have researched this, the more questions it raises! All advice gratefully accepted. Thanks!

    more than likely it is your video card. If it is ATI 2600XT, tell it bye-bye. The card is barely used at all in TDM or Safe Boot Mode. The 2600 and Lion and the issues with that card, even if it seems okay, is not.
    Depending on Windows OS as to how it mounts and sees your Lion HFSX (there is a nice HFSX driver from Paragon, and an NTFS driver for Lion too)
    480GB SSD is overkill for any system unless you are pushing CS6 2-3GB images and then for scratch. All you need for a boot drive is about 100GB.
    If you have an SSD now, then 1) you need to do a full image backup and restore (regularly as maintenance), and 2) TRIM Enabler
    Save Lion and you can always do a clean Lion install w/o going back to SL - but you might want to keep SL (dual boot) and handy if you run into anything you still need that required PowerPC/Rosetta
    FBDIMM RAM dies, Amazon has $32 kits of 4GB. And having all 8 DIMM slots filled improves things. If you need or want to and feel 16GB isn't overkill.
    SSD and issues are always possible. you should not just go along. not without a clone image. And you should have another drive w/ TRIM Enabler so that you can do a repair and "trim" what is needed.
    Clone a system with CCC regularly. Bootable. And can also be used by Setup Assistant.
    Install Lion over a heavily used SL system and there are likely remnants of old things that get in the way and left in there and not removed.

  • Power Mac G5 Dual 2.5 - Move Hard Drive to another G5??

    Hi,
    I'm using a Power Mac G5 Dual 2.5 w/ OS 10.5.8 with my Pro Tools 7.4.2 HD3 rig, 2 internal hard drives and tons of external FW hard drives.  It's being hinky with me (every time I reboot/restart the Mac, I have to take the side cover off or it won't boot; wierdest problem ever), and being that I don't want to plunk down thousands of dollars on a new Mac and all new Pro Tools equipment, I'm hunting E-Bay for an exact duplicate of my Mac, of which there are plenty.  Since PowerPC architecture is long dead, they are dirt cheap.  No reason not to have a spare.
    My questions are:
    If I buy another Power Mac G5 Dual 2.5 machine, and swap the hard drive it comes with, and use my already functional hard drive (with the OS, Pro Tools and all related plug-ins installed), and move over my Pro Tools cards and 8 GB of RAM to the new(er) machine, will it boot up and work without me having to reformat/reinstall everything? 
    I also see numerous Power Mac G5 Dual 2.7 machines out there as well.  What are the chances of doing the same as question 1 with this?  I know the processor is different, but would my already formatted and functional hard drive care?  I don't think this will work, but I have to ask.
    If Question 2 is even possible, would upgrading to a Dual 2.7 even be worth it as far as noticeable speed improvement?  Superior Drummer, EZ Drummer and EZ Keys are all real time plug-ins that need the Mac's processor/memory to work. They don't use the Pro Tools cards to work.  So, would getting that extra 200 Mhz of processor power even matter?
    The reason I ask is that reinstalling the OS and Pro Tools is not the issue; 4 hours and it's done.  BUT, reinstalling Superior Drummer, EZ Drummer,and EZ Keys, along with the mountain of expansion packs, will literally take several days of work.  If I could just plop my old hard drives and 8GB of RAM into a newly purchased G5 Dual 2.5 or 2.7, and not go through that, it would be AWESOME.
    Thanks for any feedback on this.

    Just got done making the transfer to the "new" Dual 2.7 G5 I bought off E-Bay.  (yes, on Christmas Eve, because....well.... I have no life).  Worked dead, solid perfect!!!  I'm grinning from ear to ear right now.
    I had to reset some pref's in Pro Tools (not an issue),  Just got done running Pro Tools through its paces, and it works perfectly.  All plug ins run (had to re-authorize Superior Drummer and some related plugins because it detected the change in system serial #, again not an issue).  Other than that, it worked like it always has. I loaded every third party plug-in I could find, and every third party program I could find, and so far everything works without any issues.  Only exception is Team Viewer locks up when I try to close it (have to Force Quit), but I couldn't care less right now. I use that twice a year if that, and just to have someone help me remotely.
    Thanks for the info and help.  This made my Holidays.

  • Mac Pro Slower after adding second hard drive

    My work computer is a Mac Pro 3,1 running Lion 10.7.3 with 4GB RAM and a 1TB hard drive. It was performing well running programs like Adobe CS5 and Final Cut Pro until I added a second 1TB drive (Western Digital WD1001FALS). After that upgrade Photoshop is way slower while programs like InDesign and Final Cut are noticable slower.
    Is there any reason for this?  Anything that can be done outside of a memory upgrade?

    Let me try to direct you to some tips on CS5, and suggest that more hard drives properly used (OS, scratch, data, backup, array) can help, but that one drive and 4GB RAM is under performing.
    Optimize Photoshop CS5
    Optimizing Photoshop Overview
    Adobe Photoshop FAQ
    Optimize performance Photoshop
    What are you using the WD1001FALS for? data? scratch?
    And open Activity Monitor and check pageouts. Unless your use if very very light, I can't see that as being enough for even CS5 code and some OS X let alone any more apps.
    Activity Monitor memory usage

  • Help!! Managed to erase a new second hard drive I added and now the system won't boot up

    I can't believe it!! Having un-successfully tried to add a 2nd 2Tb HD, which wouldn't identify itself properly or erase. I took a HD out of one of my PCs and tried again.  This time the hard drive was identified correctly and using disk utility I erased it and formatted it successfully.  I then shut down, restarted and all I got was an initial white screen and then a black one with a flashing cursor.  What have I done wrong...? How can i get the OS to start properly? 

    Hold down the Alt/Option key while you restart.
    This invokes the All-in-ROM Startup Manager, which very slowly inspects each drive and draws an Icon for each potentially-bootable Volume.
    If it finds one, select it and click proceed arrow.
    If not you will need to boot fron your Installer/Utilities DVD and use Disk Utility from there to look around.
    ¿Is there a possibility a new drive is messing up the SATA Bus and precluding booting?

  • MacBook Pro hard disk noise, froze and wont boot

    I was using my MacBook Pro and it froze at the same time I could hear the hard drive cracking. The following are guesses because of the sounds I was hearing: While the hard disk made cracking noises, it would stop spining. Then it started to spin again and another crack would stop the spining.
    I held down the power button to shut down and now it wont boot. I can hear the same type of noises I described before.
    Thanks for the help

    Based on your comments, your HDD is dead.  Get a new one, larger and faster if can afford it and swap in your MBP.  You will have to reinstall your OS and I hope you have a back up of your data.
    Caio.

  • Adding a second Hard Drive for /var and /opt

    I need some help... I have an Ultra 60 with 1 36 Gig drive, Solaris 10 with Java DeskTop. I want to add a 9 Gig drive to extend /var and /opt. Below is the data on the disk (format). My question is: How do I set this disk up so the /var and the /opt can extend into the new drive and then mount the drive. I am NOT a guru on setting up HD's and have read the Solaris admin book part to help me along, I am very lost. When I installed Solaris 10 I gave the /var 15 megs. It seems Solaris 10 patch manager wants to install all the patches in /var/sadm/patch thus I am eating up the 15 megs fast. What I need to know is just how to set up the below drive... HELP!
    format> verify
    Primary label contents:
    Volume name = < >
    ascii name = <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
    pcyl = 4926
    ncyl = 4924
    acyl = 2
    nhead = 27
    nsect = 133
    Part Tag Flag Cylinders Size Blocks
    0 root wm 0 - 73 129.75MB (74/0/0) 265734
    1 swap wu 74 - 147 129.75MB (74/0/0) 265734
    2 backup wu 0 - 4923 8.43GB (4924/0/0) 17682084
    3 unassigned wm 0 0 (0/0/0) 0
    4 unassigned wm 0 0 (0/0/0) 0
    5 unassigned wm 0 0 (0/0/0) 0
    6 usr wm 148 - 4923 8.18GB (4776/0/0) 17150616
    7 unassigned wm 0 0 (0/0/0) 0

    Here's another idea: use Live Upgrade. I'll assume your "new" 9G disk is on /dev/dsk/c0t1d0. Use format to partition the disk with one partition, /dev/dsk/c0t1d0s0. Don't mount the new parititon. Use Live Upgrade lucreate to put the boot environment on the new partition:
    lucreate -c be1 -n be2 -m /:/dev/dsk/c0t1d0s0:ufs(You can probably come up with more useful names than "be1" and "be2"!)
    lucreate will copy over all your existing root, /usr/, /var to the new disk. This will take a while, but you can continue using your system while it runs (no need to be in single user mode.) When it's done, use luactivate to make the new boot environment active and boot it.
    This gives you a system with everything in one partition. If you want to stick with different partitions for the different systems, lucreate can do that too, see the man page and docs. I think it's more trouble than it's worth for a single-user/desktop type system.
    Once you're up on the new disk, you can look into repartitioning the old disk to get you a similar-size partition to use as a spare boot environment, and you can start using Live Upgrade for what it was designed for: letting you upgrade without taking the system down.

Maybe you are looking for