Power Mac G5 (Dual 2Ghz 970MP) running 10.5.8 but crashes trying to install 10.4
Would you be able to help? I just purchased an old Power Mac G5 (late-2005, PowerMac11,2) model A1117 EMC 2023 (Dual 2Ghz, 970MP) that was running OS 10.5.8 but want to install 10.4.6 to run Classic Mode applications under 9.2.1.
The G5 configuration is:
1. Boot ROM - 5.2.7f1
2. 1.5Gb DDR2 SDRAM memory
3. 80Gb Maxtor SATA
Booting off a Mac OS X Tiger (includes Xcode2) install DVD (2Z691-5305-A) (complete with original documentation) that I bought off eBay, the G5 has kernel crash with the following traces at startup:
After this, I reset it by pressing power button, eject the DVD, and I'm back at 10.5.8. I don't have the original install DVD so have tried to use the full retail 10.4.6 (purportedly) version, but haven't gotten that far to verify which version it is.
Thoughts?
Thanks for your ideas in advance.
I only have the GeForce 6600LE PCIe card in Slot 1. No AirPort Extreme/Bluetooth card.
I did replace the old PRAM battery (voltage 2.94) with a new CR 2032 and reset the PRAM holding down Command-Option-P-R keys until second boot tone chimed. (A lot of dust in there, but I haven't really cleaned it yet...) After boot, I reset the date / time.
First, I inserted the OS X 10.4 install DVD, double-clicked on the Installer icon and the G5 rebooted loading from the DVD and then, the same kernel crash as shown on the screen shots above.
Second, I inserted the install DVD, rebooted without holding the alt key and the G5 loaded the DVD and crashed as before.
Third, I inserted the install DVD, did nothing to open the Installer, then closed the DVD. Checked Startup Disk and none of the icons (HD, DVD, Network Startup with "?") was highlighted. I rebooted and I held the alt key at bootup and it presented me with four icons: 1) the hard drive (highlighted), 2) the DVD, 3) a clockwise arrow, and 4) an arrow facing to the right. I selected the DVD with the mouse and clicked on the right arrow. Same crash as before.
I pressed on the eject key, rebooted, took out the DVD, and 10.5.8 booted up as normal.
Thoughts? I have my suspicions about the DVD, but that makes no sense as it appears to be an original with documentation (Welcome to Tiger, Installation Guide, , box, etc.
Thanks.
Similar Messages
-
I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out? Also will I be able to get Icloud to work?
Hi Mary, the other so called "Features" of iClound will not work for like Syncing, but eMail will.
MobileMe & dot Mac will still work last I heard.
iCloud Mail setup, even in 10.4/10.5…
Don't delete your old account yet. Just setup a new one in Mail>Preferences>Accounts, little plus icon. Choose IMAP as account type, not ,mac or MobileMe.
IMAP (Incoming Mail Server) information:
▪ Server name: imap.mail.me.com
▪ SSL Required: Yes
▪ Port: 993
▪ Username: [email protected] (use your @me.com address from your iCloud account)
▪ Password: Your iCloud password
SMTP (outgoing mail server) information:
▪ Server name: smtp.mail.me.com
▪ SSL Required: Yes
▪ Port: 587
▪ SMTP Authentication Required: Yes
▪ Username: [email protected] (use your @me.com address from your iCloud account)
▪ Password: Your iCloud password -
My Power MAC G5 has a peculiar problem. The monitor fails to report until the machine is started and shut down 5 or 6 times. Once it has booted it can be restarted without incident from the Apple menu. I have swapped out all of the hardware. Monitor, Memmory,Video Card and reset the PRAM. After resetting the PRAM it booted on the first attempt and I thought it was solved. But the next day it was back to starting and stopping until the Monitor came on. Does anyone have a suggestion? Thanks
It could be a bad PRAM battery corrupting your PRAM. Typically when I have monitor issues on startup it is a bad PRAM battery.
Texas Mac Man's PRAM, battery, PMU tutorial - https://sites.google.com/site/macpram/mac-pram-nvram-cuda-pmu-battery-tutorial
Apple's PRAM reset directions - http://docs.info.apple.com/article.html?artnum=2238
If you have a digital multimeter you can check the condition of your present battery. It should read at least 3.2V if it is the 3.6V half-AA battery type. A new battery provides 3.67 Volts DC. A bad battery provides under 3.2 Volts DC. Ideally this should be measured while the battery is under load; added recommendation from Hans777:
>I have recently found out that an exhausted battery will still indicate >3.6 V with a high internal resistance VM.
>
>Checking incircuit: powercord disconnected press PMU reset button for >about 5 sec before measuring.
>
>Checking outside: load the battery with a 1500 Ohm resistor when measuring.
Alternatively, test the battery while it is still in the computer.
If the battery is more than 5 years old, especially if you totally disconnect the computer from the power regularly, or have left it unplugged for several months at one time, it is likely the battery is dead.
Sometimes you have to do a more intensive reset of hardware management:
[Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3|http://support.apple.com/kb/HT1939]
[How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)|http://support.apple.com/kb/HT1436]
[iMac G5: How to Reset the SMU|http://support.apple.com/kb/HT1767] -
Power Mac G5 Dual 2.5 GHz running 10.5.8 cannot burn DVD+R
Hello all-
I have a Power Mac G5 Dual 2.5 GHz running 10.5.8 and I cannot burn DVD+R. Does that make sense?
If I insert a DVD+R into the drive, it just spits it back out. I've tried several discs so it's not a faulty DVD.
Help.
Thank you.I've tried several discs so it's not a faulty DVD
I trust that is several different brands, not several different discs from the same spindle/pack?
Media varies.
http://www.digitalfaq.com/media/dvdmedia.htm
If you haven't tried a different brand, try a Verbatim or Taiyo Yuden.
You might also try burning in a new user account to rule out account software troubles. -
Logic 7.2 made my dual 2ghz G5 run like a G4.
Hi guys,
I guess i have to give my 2 cents about this new update.
This update just made my dual 2ghz G5 run like a G4.
The cpu just went to the roof.
I open a garage band synth and played a few notes on my keyboard with nothing else on the arrangement and i could not believe my eyes...the processor was going up and down as i was playing the notes about %15 of the cpu.
I open the last session i was working on and the difference was shocking.
Apple are very clever company...they made this update for Intel and it seams that the next updates will be even more power hungry for G5 users.
So we are FORCED to buy new machines if we want to continue with the horsepower.
I love my Mac's and respect Apple like no other company... but this as made me very unhappy indeed...
I loved my system like none i add before in my live and now i think i just have to reinstall the system and get back 7.1.
One thing i did notice that made me very happy.
The support for controllers...My korg 49 controller now rocks even more.
If you have a control surface check the new ficture...simple amazing.
And rewire is also nice.
Just wanted to leave my 2cents.
Take careI'd try reinstalling logic and the usual OS
troubleshooting.
I have no choice to try that...
Word to the wise - when installing a new version of Logic, ALWAYS backup the old one! Copy it, zip it if you have to, whatever. Emagic used to just install a new app, but Apple updates the current one, so, it makes sense to backup. (In other words, back up what you've got right now for the future!)
I haven't gone past 7.1 yet, but I've got versions of Logic 5 and 6 sitting right in the next folder, for when I need to try something/revert/fix problems/track bugs, etc. Plus they're duplicated on another drive...
You need to have options; don't let yourself work without them.
GK
Dual 2Ghz G5 Mac OS X (10.4.2) Logic Pro 7.1 -
Power Mac G5 Dual 2.5 - Move Hard Drive to another G5??
Hi,
I'm using a Power Mac G5 Dual 2.5 w/ OS 10.5.8 with my Pro Tools 7.4.2 HD3 rig, 2 internal hard drives and tons of external FW hard drives. It's being hinky with me (every time I reboot/restart the Mac, I have to take the side cover off or it won't boot; wierdest problem ever), and being that I don't want to plunk down thousands of dollars on a new Mac and all new Pro Tools equipment, I'm hunting E-Bay for an exact duplicate of my Mac, of which there are plenty. Since PowerPC architecture is long dead, they are dirt cheap. No reason not to have a spare.
My questions are:
If I buy another Power Mac G5 Dual 2.5 machine, and swap the hard drive it comes with, and use my already functional hard drive (with the OS, Pro Tools and all related plug-ins installed), and move over my Pro Tools cards and 8 GB of RAM to the new(er) machine, will it boot up and work without me having to reformat/reinstall everything?
I also see numerous Power Mac G5 Dual 2.7 machines out there as well. What are the chances of doing the same as question 1 with this? I know the processor is different, but would my already formatted and functional hard drive care? I don't think this will work, but I have to ask.
If Question 2 is even possible, would upgrading to a Dual 2.7 even be worth it as far as noticeable speed improvement? Superior Drummer, EZ Drummer and EZ Keys are all real time plug-ins that need the Mac's processor/memory to work. They don't use the Pro Tools cards to work. So, would getting that extra 200 Mhz of processor power even matter?
The reason I ask is that reinstalling the OS and Pro Tools is not the issue; 4 hours and it's done. BUT, reinstalling Superior Drummer, EZ Drummer,and EZ Keys, along with the mountain of expansion packs, will literally take several days of work. If I could just plop my old hard drives and 8GB of RAM into a newly purchased G5 Dual 2.5 or 2.7, and not go through that, it would be AWESOME.
Thanks for any feedback on this.Just got done making the transfer to the "new" Dual 2.7 G5 I bought off E-Bay. (yes, on Christmas Eve, because....well.... I have no life). Worked dead, solid perfect!!! I'm grinning from ear to ear right now.
I had to reset some pref's in Pro Tools (not an issue), Just got done running Pro Tools through its paces, and it works perfectly. All plug ins run (had to re-authorize Superior Drummer and some related plugins because it detected the change in system serial #, again not an issue). Other than that, it worked like it always has. I loaded every third party plug-in I could find, and every third party program I could find, and so far everything works without any issues. Only exception is Team Viewer locks up when I try to close it (have to Force Quit), but I couldn't care less right now. I use that twice a year if that, and just to have someone help me remotely.
Thanks for the info and help. This made my Holidays. -
Power Mac G5 Dual 1.8 PCI (4 RAM Slots) - want to upgrade to 8GB?
My computer is a Power Mac G5 Dual 1.8 PCI (4 RAM Slots)
Is there any way I can break out of the 4GB RAM limit into the world of 8GB RAM without having to buy a newer computer. I need to open a large 4.5GB TGA file in After Effects (48000 pixels x 36000 pixels).
Failing that, is there an application like RAM doubler I could use temporarily to get me though this job?
Power Mac G5 Dual 1.8 PCI (4 RAM Slots) Mac OS X (10.4.10) Currently have 4GB RAM installedIf there is not enough RAM, OSX will use space on the disk drive, so the amount of RAM should not limit the file size an application can handle, but speed will be reduced. 32-bit addressing can restrict the use of huge files, but there are ways that applications can get around it (at the expense of lower speed).
If After Effects has a file size limit, extra RAM will not help A later version (maybe using 64-bit mode) may handle larger files. 64-bit applications can be written to run in Tiger on G5s, but will be easier to write when Leopard is released.
You may be able to use some other application, such as Photo Shop, or Graphics Converter, to extract part of the TGA file, or reduce its size by changing its resolution, so you can use the result in After Effects. -
Fan speed problem Power Mac G5 Dual 1.8 GHz PowerPC - please help
Please HELP, I have a fan speed problem with my Power Mac G5 Dual 1.8 GHz PowerPC
This is a NOT an Intel machine. I am running Mac OS X v10.5.8
Power Mac G5 - PowerMac 7,2 - Power PC 970 (2.2) - 1.8 GHz with 2 CPUs - L2 Cache (per CPU) 512 KB - Memory 8 GB - Bus Speed 900 MHz - Boot ROM version 5.1.5b1
I have included below Links to download a sound file (.m4a) that I recorded of the fan speed problem and both a .pdf and .spx files of my system profile.
download sound file
http://homepage.mac.com/rep3/filechute/myG5dualsFans.m4a
down load .spx file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.spx
down load .pdf file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.pdf
When did the fan problem start?
After I replaced the mother board on the computer.
Why did I replace the mother board?
Because the experts at apple agreed with my diagnosis that the major crash problems & kernel panics must have some thing to do with a logic board gone bad. They would not work on it, because this Power Mac G5 dual 1.8 GHz machine is now a legacy model.
What I have done to attempt to fix my fan speed problem? yes I checked the obvious things, here is a list:
1) yes I checked to be sure that the new mother board was the same part number as the original one, and that all things that were unplugged from the old mother board - were actually plugged into the new mother board.
2) all the fans work, I can see them spinning if I use a flashlight and look at them (cover on and off to get at some of them)
3) check all RAM to make sure: a) it was installed properly b) that the RAM worked using TechTool Pro c) even started the machine with only the original RAM that came with it.
4) I installed a Temperature monitor - to see if there was something reading as very hot inside that was causing the machine to continually run the fans at a high speed. No, no heat issues that I can see. Here are the reading from the sensors in degrees fahrenheit, 2009-10-11 16:11:01 -0500
CPU A Die Temperature: 75.7℉
CPU B Die Temperature: 81.5℉
Drive Bay: 68.9℉
Main Logic Board Air Inlet: 64.8℉
Main Logic Board Ambient: 73.6℉
Main Logic Board Backside: 76.3℉
Memory Controller Heatsink: 93.2℉
Processor Card A Ambient: 77.5℉
Processor Card B Ambient: 77.0℉
5) zapped the PRAM
6) followed the SMU reset instructions for
Power Mac G5 (Late 2004)
To reset the SMU on a Power Mac G5 (Late 2004) computer, simply do the following:
• Turn off the computer by selecting Shut Down from the Apple menu or by holding the power button until the computer turns off.
• Remove the power cord from the computer.
• Wait two minutes.
• Plug in the power cord.
• Turn on the computer.
7) followed the SMU reset instructions:
Resetting the Cuda/PMU
How to reset the PMU:
• If the computer is on, turn it off.
• Disconnect ALL cables from the computer, including peripherals and power.
• If possible, move the computer to a place where you are not standing on carpet.
• Open the case and ground yourself by touching part of the metal frame inside the computer.
• Find the Cuda or PMU button
• Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
• Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
• If the computer still does not respond after resetting the PMU, the computer may require service from an Apple Authorized Service Provider.
8) ran disk utilities, repaired permissions
9) found a setting in the system preferences that a chat room person suggested had something to do with fan speed. In Energy Saver, under options, processor performance was set to highest, I set it to automatic - this did not change anything that I could tell - BTW I checked my other G5 (a single processor that works fine) that is the setting that that it is set to, and it is nice and quiet.
10) restarted the machine, ..
11) found a Fan Control System Update - but it did not install when I tryed to install it -
12) booted from OSX install disk and ran that disk utility
13) used OnyX to fix disk permissions, clear caches and temp items
Nope - still have the same high speed fan problem. ... PLEASE HELP!!
I have been reading in the MacInTouch reader reports - found this: some one said to use this - thermal re-calibration using the Apple Authorized Service Providers' disk - but that's not available, at least I can not find it - anyone? have an answer to finding this - or can do it for me? I am in Chicago.The Genius at the downtown apple store said that because it's a "legacy machine" they would not work on it, .. so should I push them?
Well, I personally think that's ridiculous, I'd Push them, I'd call AppleCare & talk up the chain if need be... there the ones that have or should have that Disc... man o man... Personally I'll never visit an Apple Store again in my lifetime, maybe try an independent AASP if none of that helps!..
http://tinyurl.com/ykomqkn
Man-o-man, pop my cork before I explode on that one, if I had anything to do with it I'd close that store. -
An advice for an used Power Mac G5 dual core 2.3
Hello.
I used a Power Mac G5 PCI-X (sett. 2003) 2.0 GHz, working with Photoshop. It worked great for yeras, but now, due to its typical logic board lack, it got broken and is unable to boot anymore (three times flashing power light).
Now, I use software for PowerPC CPUs, so I can't get new computers, because I should replace all the software too!
I'm going to buy an used Power Mac G5 dual core 2.3 GHz:
http://www.everymac.com/systems/apple/powermacg5/stats/powermac_g5_dual2.3.html
This is the configuration:
Ram: 5.5 GB
HD: 250 GB
SVGA: GeForce 6600 - 256 MB.
About 650 dollars.
According to you, is this a good product? do you know any issue or manufacturing fault?
Would you buy it if you were me?
Thank you!I tried heating it (not with the hair dryer), after about 1 hour it booted and worked very well, as in past. But when I powered it off, it started again with the same problem: unable to boot and three times flashing light.
I need a working system.
Furthermore, I removed the hard disk (sata 160 GB), and installed it in a Mac Pro: but it recognized only the second partition (data). So I run the Disk Utility and gave immediately an error (wrote in red and big), writing that the hard disk had a serious physical problem, and that if the computer was able to see the disk, I had to make immediately a backup.
But the three-times flashing light error of the G5 was not given due to the hard disk, because I tried several times to boot it from the OSX DVD, also removing the hard disk, and it always gave the same problem. -
Power mac G5 dual, startup and fan problem
Dear macpeople,
I have a Power mac G5 dual, 1.8 ghz, ramm 4.5GB. I guess from 2004. Only added more Ram three years ago. Never had any serious problem till a week ago. I have read a lot of similar questions and responses on my problem in this forum but till so far i have not been able to solve it.
Since a couple of weeks my mac sometimes did,nt recover from sleep. Starting up gave me some trouble because the fans were racing like **** and i had to restart several times to be able to boot normally. In the beginning just the upper fan next to de CD player ran fast and loud but now all of them get crazy at start up. Very rare times G5 is able to recover this (fans slowing down) and boot up, but this only in the safe mode.
I have cleaned the mac
i have resetted PRAM
i have used utility disk, all ok
i have unplugged for 40 min, reset in the machine, safe start up.
Checked memory
The only way to boot is in the safe mode. The fans start blowing fast but after 4 min. they slow down then the blue screen appears and mac builds up normally. But when i leave it for more than 1 hour in the sleep mode it will not recover, although i hear the normal sound of awaking/ accelerating disc. The screen keeps black and after a few minutes fans start blowing at full speed. Pushing 4 sec. the on/off button pulls it off.
I hope that someone can help me to solve this problem (me not being a tecnician at all) or that someone can give me a kind of diagnostic so that i can check the costs of profesional reparation. And start saving money for a new machine.
Any one any clue? Help would be very apreciated
ThnksSee if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
Power Mac G5 Dual Core freezing
Hi,
Everything works fine with my G5 with 4GB RAM, except one thing:
Sometimes when I work for a long time, my mouse justs freeze,
The red light near the RAM slots appears and the fans start being noisy ! (LED 7—Checkstop: red—contact Apple or an Apple Authorized Service Provider)
I reboot and all just works fine until the next freeze
I ran Hardware test and apple diagnotics many times but all the tests including the ram test passed successfully.
It happens like 1 or 2 time by day. I couldn't identify the cause or the frequency of the problem (maybe Eyetv usb box, or a spécific app that causes the computer freezing ??? !)
Thanks for the help !
Power Mac G5 Dual Core 2,3 Ghz Mac OS X (10.4.8)Curiously - we have two new Dual 2.3 G5s and they exhibit this same behavior. Suddenly freezing - and not necessarily while we have a lot of apps running. iTunes is always going in the background though. I'll start monitoring the temps on these machines and we'll see what happens. Does anyone know of a menubar app that might display CPU temp on the fly? Could be useful if we see a spike in temperature and then a crash.
One notable thing though, when it does crash, it crashes hard. Everything freezes, the audio (since iTunes is usually running) begins to skip on the last section of the track it was playing, sort of like a skipping record - only much faster. It also appears to have happened to one of the machines last night while it was asleep. I came in the morning the the fans were going crazy - and yes, the little red LED was on. What does that mean?
Dual 2.3 PM G5 Mac OS X (10.4.8) 4 GB RAM, etc.
iMac Intel Core Duo 20" Mac OS X (10.4.6) iBook G4, iBook G3, iPod Video 30GB, iPod Nano 2GB, iPod Mini, 2G iPod 20G -
Dual monitor for Power mac g5 dual 2.3ghz
I wanted some advice on which monitors to get for a dual monitor setup and if its even possible to setup on my G5 or do I need a different video card?
Here's my computer spechs:
Power mac G5 dual core 2.3 ghz (late 2005)
Model: A1177
Memory: 2GB DDR2 SDRAM
HDD: 250GB
OS X 10.5.8 Leopard
The only thing I run on this is logic studio 8. I wanted to expand my setup but not sure how.
Any advice is greatly appreciated! Thanks
< Edited by Host >It depends on which video card you have installed, though not much. Whichever card you have installed, you should have two DVI outputs available. With the minimum 256 Meg VRAM, you should be able to support two 1920x1080 monitors without a problem, and the "HD" monitors are getting very plentiful and dropping in price. Were I to buy today, I would make sure to get an LED monitor, as that flavor should have a longer overall life than a florescent panel monitor. You can find monitors in 23" dimensions for under $200 a pop, and more 27" monitors are showing up at a slightly bigger bite.
-
Power Mac G5 Dual 2.7GHz Processor L.E.D indicator
I got a power mac g5 dual 2.7GHz here and it is acting weird. I found out it is the liquid cooling system that causes the problem. I took out the whole lcs unit and fix it. But when I put everything back, turn it on, there is no display and chime sound. The fan seems to run at the normal speed and when I check the processor board, there is a red l.e.d light at the bottom, which i didn't notice it before. Could that mean one of the processor is having error? Please advise me of what to do. Thanks.
Well, sorry if I didn't stated it clearly. It is not the L.E.D that we normally found on the motherboard. It is the one that on the processor board itself, which attach to the bottom of the liquid cooling unit. There is two processor board in my case, which one of it got the red l.e.d lights up. Could it be the processor problem? I can't get any display or chime sound when booting it up, even though the fan and everything seems to be running properly. I wonder if you ever encounter such problem?
-
Trying desperately to upgrade my Power Mac G5 Dual Processor to Mac OS X.4 - what kind of upgrade is needed? How may I proceed?
Hello Jens,
Might be easier to get Leo/10.5.x
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
old: http://discussions.apple.com/thread.jspa?messageID=9755670�
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6. -
Power Mac G5 dual processor problem
So I've got a Power Mac G5 Dual 1.8Ghz that I bought used that only had one processor working. When started up, the screen hangs after the gray start up screen. I figure replacing both processors would fix the problem. Having bought 2 new processors, I installed them and now the computer won't boot at all. The power light comes on but doesn't stay on, the fans spin but nothing comes up on the screen. Is this a logic board problem? Any help would be appreciated.
BDAqua wrote:
Hi Jade8503, and a warm welcome to the forums!
After changing CPUs you need to calibrate everything for one, look for Apple Service Diagnostics, ASD 2.6.3 I think, not sure which G5s that is for actually, but it's a start.
2.5.8 should work on that machine as well.
Maybe you are looking for
-
Why is the URL constantly updated in ie but not in safari?
Safari: https://www.mysite.com/app/editor?handle_type_id=7#m=editor&wfs=2 Internet Explorer 8: https://www.mysite.com/app/editor?handle_type_id=7#1262397566?1262397566?1262397566?126239 7566?1262397566?1262397566?1262397566?1262397566?1262397566?1262
-
Unable to check certificate validity online. check...
please help me on this... m not able to load anything my phone is n73-1 Personal details removed by a moderator. We kindly ask you not to share your personal contact details publicly on this forum.
-
16:9 anamorphic quicktime file?
im trying to save a 16:9 project in FCP as a full res Quicktime .dv file so i can then import it into imovie ... but everytime i try and save it, when i import it in imovie just shows it as a stretched 4:3 file... can anyone tell me what i need to ch
-
The menu bar has file, edit, view, tools, bookmark, etc, I don't need it taking up an inch or MORE at the bottom below my tiles, they are already too tightly together. Thanks.
-
Upgrading To SL By Erase And Install. How Can I Save All My Mail Accounts?
I am thinking about erasing my HD and installing Snow Leopard. This will destroy all my Mail accounts and it takes ages to reinstall them as each one has to send off and receive info back from my ISP which can take 5 or more minutes. Is there somethi