Power Mac G5 Dual Core freezing

Hi,
Everything works fine with my G5 with 4GB RAM, except one thing:
Sometimes when I work for a long time, my mouse justs freeze,
The red light near the RAM slots appears and the fans start being noisy ! (LED 7—Checkstop: red—contact Apple or an Apple Authorized Service Provider)
I reboot and all just works fine until the next freeze
I ran Hardware test and apple diagnotics many times but all the tests including the ram test passed successfully.
It happens like 1 or 2 time by day. I couldn't identify the cause or the frequency of the problem (maybe Eyetv usb box, or a spécific app that causes the computer freezing ??? !)
Thanks for the help !
Power Mac G5 Dual Core 2,3 Ghz Mac OS X (10.4.8)

Curiously - we have two new Dual 2.3 G5s and they exhibit this same behavior. Suddenly freezing - and not necessarily while we have a lot of apps running. iTunes is always going in the background though. I'll start monitoring the temps on these machines and we'll see what happens. Does anyone know of a menubar app that might display CPU temp on the fly? Could be useful if we see a spike in temperature and then a crash.
One notable thing though, when it does crash, it crashes hard. Everything freezes, the audio (since iTunes is usually running) begins to skip on the last section of the track it was playing, sort of like a skipping record - only much faster. It also appears to have happened to one of the machines last night while it was asleep. I came in the morning the the fans were going crazy - and yes, the little red LED was on. What does that mean?
Dual 2.3 PM G5 Mac OS X (10.4.8) 4 GB RAM, etc.
iMac Intel Core Duo 20" Mac OS X (10.4.6) iBook G4, iBook G3, iPod Video 30GB, iPod Nano 2GB, iPod Mini, 2G iPod 20G

Similar Messages

An advice for an used Power Mac G5 dual core 2.3

Hello.
I used a Power Mac G5 PCI-X (sett. 2003) 2.0 GHz, working with Photoshop. It worked great for yeras, but now, due to its typical logic board lack, it got broken and is unable to boot anymore (three times flashing power light).
Now, I use software for PowerPC CPUs, so I can't get new computers, because I should replace all the software too!
I'm going to buy an used Power Mac G5 dual core 2.3 GHz:
http://www.everymac.com/systems/apple/powermacg5/stats/powermac_g5_dual2.3.html
This is the configuration:
Ram: 5.5 GB
HD: 250 GB
SVGA: GeForce 6600 - 256 MB.
About 650 dollars.
According to you, is this a good product? do you know any issue or manufacturing fault?
Would you buy it if you were me?
Thank you!

I tried heating it (not with the hair dryer), after about 1 hour it booted and worked very well, as in past. But when I powered it off, it started again with the same problem: unable to boot and three times flashing light.
I need a working system.
Furthermore, I removed the hard disk (sata 160 GB), and installed it in a Mac Pro: but it recognized only the second partition (data). So I run the Disk Utility and gave immediately an error (wrote in red and big), writing that the hard disk had a serious physical problem, and that if the computer was able to see the disk, I had to make immediately a backup.
But the three-times flashing light error of the G5 was not given due to the hard disk, because I tried several times to boot it from the OSX DVD, also removing the hard disk, and it always gave the same problem.

Power Mac G5 Dual Core Screen Goes Black Randomly But Seems To Still Be Running. I have to Force Quit

I totally just typed way to much info in the title.
In any event, my G5 Dual Core's(late 2005) screen will randomly go black with out notice. Its happend while designing in illistrator and also while browsing google(primarly the use of my comp is graphic design). The fans stay on and it sounds to still be fully running however the screen will not wake up and if i tap the power button it doesnt wake up either. I reset the "PRAM" while booting up, i toggled my screen saver/power saver also so its "never".
I thought the HD was faulty cause it sounds like a light saber at times... I figured the OS was crashing(im ingorant) so I bought a new one and more ram as well. I've installed the HD and am waiting for 10.3 OS to get here in hopes that the new HD and OS will not crash(again that was my educated guess as to what the issue was).
Is it a video card issue? faulty cable you think(VGA to DVI 17" Samsung)?
Thanks so much in advance for any and all feed back along with the patience of a newbie to the forum/community world.
-KRAWSH

Hello,
Have you blown the dust out of it lately, especially the Video card, Power Supply, & RAM areas?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.

Adobe Audition Vesrion für Power Mac G5 Dual Core Woooo ist diese auffindbar ???

Hallo Zusammen,
mein alter Mac läuft noch wie eine 1.
Ich würd gerne eine Audition Version kaufen.... kann mir jemand helfen wie ich an eine Version heran komme?
Windows wäre kein Problem... aber Mac ist uuuunauffindbar.
Verkauft hier vieleicht jemand eine Version?
Danke im voraus....
Marcello

Hallo Marcello,
Ich schlage die Version Audition CS6 vor. Das kann man hier kaufen:
http://www.adobe.com/ca/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_s l_creativesuite6.html?start=20
(Ich habe hier die Kanadische URL, aber es wird an die richtige URL für deine Region leiten)
Wenn Du Interesse an eine Mitgliedschaft in Creative Cloud haben, kann man das hier erwerben: http://adobe.ly/ZyiScn
Let me know if you have any questions!
Eric

Dual monitor for Power mac g5 dual 2.3ghz

I wanted some advice on which monitors to get for a dual monitor setup and if its even possible to setup on my G5 or do I need a different video card?
Here's my computer spechs:
Power mac G5 dual core 2.3 ghz (late 2005)
Model: A1177
Memory: 2GB DDR2 SDRAM
HDD: 250GB
OS X 10.5.8 Leopard
The only thing I run on this is logic studio 8. I wanted to expand my setup but not sure how.
Any advice is greatly appreciated! Thanks
< Edited by Host >

It depends on which video card you have installed, though not much. Whichever card you have installed, you should have two DVI outputs available. With the minimum 256 Meg VRAM, you should be able to support two 1920x1080 monitors without a problem, and the "HD" monitors are getting very plentiful and dropping in price. Were I to buy today, I would make sure to get an LED monitor, as that flavor should have a longer overall life than a florescent panel monitor. You can find monitors in 23" dimensions for under $200 a pop, and more 27" monitors are showing up at a slightly bigger bite.

Airport Extreme Card for my Apple Power Macintosh G5 Dual Core (2.3) Late 2005 - M9591LL/A - PowerMac 11.2 - A1117

Hello there, I have an Apple Power Macintosh G5 Dual Core (2.3) Late 2005 - M9591LL/A - PowerMac 11.2 - A1117.
What Airport extreme & Bluetooth card I need? why the memory are so hard to find? can I use another faster DDR2 memory?
Sorry for to many question but I search on "Saint Google" and there is too much information not precise.
Tnxs a lot
Pablo

You need an Airport Bluetooth module with the required runway card.
Here is the kit:
http://www.dvwarehouse.com/Apple-AirPort-Extreme/Bluetooth-Upgrade-Kit-for-Power -Mac-G5-Dual-Core--Quad-Core-Late-2005--MA252G/A---Refurbished-p-36513.html
Get memory here:
http://eshop.macsales.com/shop/memory/PowerMac-G5-Memory
100% compatible and lifetime guaranteed....
You can use a faster memory, but it will not run faster, will likely report wrong and may give other issues.

HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
Hope this helps.

Need help finding a good monitor for a Power Macintosh G5 Dual Core (2.0)

Hi
I've owned Macs since the 90's - the past 7 years have been using Imacs... I'm going to purchase a Power Macintosh G5 Dual Core (2.0) with the Nvidia 6600LE card. Whats a decent monitor for it? It's DVI output only as far as I can tell - I want at least a 22 or 24 inch monitor and want a fairly inexpensive one as I'm a poor man (Social Security disability). Can anyone suggest one - I can't tell what screen resolutions are optimal for the card (googled till my eyes hurt) if I knew that I could start hunting CompUSA, Sams Club, etc.

Check out newegg.com. I just got the same G5 you have this past summer and a couple months ago finally decided it was time to ditch the old 21" CRT Viewsonic Ive been using for years.
I picked up a 21" Acer widescreen HD LCD on sale for $119.00 from newegg and could not have been happier..
Ive never bought anything from Acer before but its so far got no complaints from me other then, the DVI cable they give you is the wrong type to use with your G5's video card. Lucky for me it had a DVI-VGA adapter so I could get running. Its running just fine at 1900x1200 without any dual link DVI connecter.
One thing I like about newegg is you get to read user reviews and they are not afraid to tell you if something is bad. Theyve always got different models and brands rotating on and off sale so check em out and make sure you check the reviews and you can find a killer deal.
I think the Viewsonics I looked at in the same size were around $199 or so.. I wouldve got one but Im a broke and jobless kinda guy nowadays so had to get one as cheap as I could..

Mac Mini Dual Core vs PowerMac DP G4

I am considering purchasing a Mac Mini Dual Core to replace my PowerMac DP 1.25Ghz G4 . I'm worried whether I will be happy , and if it will be faster than my G4. The app's I run most are univeral binary or will be soon , so I'm thinking , yes. But I would feel more comfortable if I could get some solid input from some power Mac user's experienced or knowledgeable with the new Mac Mini
PowerMac DP 1.25 Ghz , 1.5GB RAM Mac OS X (10.4.5) Dual 80GB Seagate Barracuda drives

I can't imagine that an Intel Mac mini would ever be "faster" than a dual-processor G4 tower for most operations. The comparisons that Apple advertises, like "4X faster" are all against single-processor PowerPC Macs. Mac OS X does a good job at managing dual PowerPC processors.
Although the new Intel Mac mini now has a faster system bus, you're MUCH more limited by the use of portable-size hard drives (for example, your PowerMac probably has over a 100GB drive to start with and could have 500GB without much cost). If you want to max-out the RAM on the new Intel Mac mini to 2GB, it will cost you $300 more. So, a 1.66GHz Core Duo Mac mini with a 120GB hard drive and 2GB of RAM is $1,224.00 (US). If I were you, I would, without question, keep the PowerMac and invest in a newer Super Drive and/or hard drive(s) before giving it up.
-Doug

Mac mini Dual core vs. G4 500MHz Dual tower w/ non native applications

I have a Power Mac G4, Dual 500MHz. I wanted to upgrade to the G5 tower, but am getting concerned that I will be buying an obsolete computer as Apple migrates to Intel. I use Microsoft Office and Adobe's Creative Suite 2 (CS2) primarily on my G4 and am really tired of the slow performance. I was thinking of buying the new Mac mini dual core and add an additional 7200 RPM external Hard Drive to improve the drive performance until the new Intel towers come out. I know that the applications I use are not written for the Intel processor. Does anyone know how well these applications perform on the Intel mini vs. my old old G4?

In a year or so, there will probably still be more PPC Mac users than Intel ones, and I doubt that any smart company will end support for PPC Macs that early. Apple provided developers with a way to create Universal Binaires for two reasons : to avoid the confusion introduced by two versions (PPC & Intel) of the same app, and to force (i.e. strongly encourage) developers to support both platforms for quite some time.
There's no doubt that a PowerMac G5 will run Leopard (Mac OS X 10.5), and probably the following version too. CS3 will be Universal, and will thus run at full speed on both PowerPC and Intel-based macs, and there's a chance that CS4 could be Universal too. If you buy a PowerMac now, it probably won't be outdated before three years or more.
While the Intel Core Duo is much faster than a G4 and quite a bit faster than a single G5, I think that a Dual G5 could be about as fast as they are (maybe a bit slower "per-gigahertz", but Core Duos don't reach 2.3/2.5 Ghz yet anyway) ...
Regarding the fact that Office runs well under Rosetta but not CS2, that's because CS2 is a much more demanding suite of applications, which probably features a lot of AltiVec code (software sepcifically optimized for the G4/G5's Velocity Engine - which wasn't originally supported by Rosetta and now is, but translating PPC code into Intel x86 isn't fast, so translating code that's supposed to run very close to the processor itself must cause an even grater performance loss). Even though Photoshop probably won't run slower than on your dual 500 Mhz, it probably won't run much faster, so if you don't want to get a PPC Mac, then I suggest that you keep your G4 for now and wait until Apple releases the next generation of PowerMacs.
On the other hand, one of the reasons why your G4 is slow with Photoshop could be because you don't have enough RAM. Most people who have used the latest version consider that 512 MB is a minimum, and 1 or 2 GB are recommended. If you only have 256 MB or so in your Mac, why don't you just add some memory and wait until the next PowerMacs ?

Power Mac Pro 8 core won't start

I have a Power Mac Pro dual, quad core that all of a sudden refuses to boot. I can hear a click and a second or two later a second click but nothing. If I unplug the unit and try in a day or two later it will start. I can reboot and it will start, if I shut down it will not start until I wait a day or so and try again it will start. Once it starts it runs great and passes all test from techtool pro 6.

Troubleshooting: My computer won't turn on

Power Mac G5 Dual 2.5 - Move Hard Drive to another G5??

Hi,
I'm using a Power Mac G5 Dual 2.5 w/ OS 10.5.8 with my Pro Tools 7.4.2 HD3 rig, 2 internal hard drives and tons of external FW hard drives. It's being hinky with me (every time I reboot/restart the Mac, I have to take the side cover off or it won't boot; wierdest problem ever), and being that I don't want to plunk down thousands of dollars on a new Mac and all new Pro Tools equipment, I'm hunting E-Bay for an exact duplicate of my Mac, of which there are plenty. Since PowerPC architecture is long dead, they are dirt cheap. No reason not to have a spare.
My questions are:
If I buy another Power Mac G5 Dual 2.5 machine, and swap the hard drive it comes with, and use my already functional hard drive (with the OS, Pro Tools and all related plug-ins installed), and move over my Pro Tools cards and 8 GB of RAM to the new(er) machine, will it boot up and work without me having to reformat/reinstall everything?
I also see numerous Power Mac G5 Dual 2.7 machines out there as well. What are the chances of doing the same as question 1 with this? I know the processor is different, but would my already formatted and functional hard drive care? I don't think this will work, but I have to ask.
If Question 2 is even possible, would upgrading to a Dual 2.7 even be worth it as far as noticeable speed improvement? Superior Drummer, EZ Drummer and EZ Keys are all real time plug-ins that need the Mac's processor/memory to work. They don't use the Pro Tools cards to work. So, would getting that extra 200 Mhz of processor power even matter?
The reason I ask is that reinstalling the OS and Pro Tools is not the issue; 4 hours and it's done. BUT, reinstalling Superior Drummer, EZ Drummer,and EZ Keys, along with the mountain of expansion packs, will literally take several days of work. If I could just plop my old hard drives and 8GB of RAM into a newly purchased G5 Dual 2.5 or 2.7, and not go through that, it would be AWESOME.
Thanks for any feedback on this.

Just got done making the transfer to the "new" Dual 2.7 G5 I bought off E-Bay. (yes, on Christmas Eve, because....well.... I have no life). Worked dead, solid perfect!!! I'm grinning from ear to ear right now.
I had to reset some pref's in Pro Tools (not an issue), Just got done running Pro Tools through its paces, and it works perfectly. All plug ins run (had to re-authorize Superior Drummer and some related plugins because it detected the change in system serial #, again not an issue). Other than that, it worked like it always has. I loaded every third party plug-in I could find, and every third party program I could find, and so far everything works without any issues. Only exception is Team Viewer locks up when I try to close it (have to Force Quit), but I couldn't care less right now. I use that twice a year if that, and just to have someone help me remotely.
Thanks for the info and help. This made my Holidays.

Power Mac G5 Dual 1.8 PCI (4 RAM Slots) - want to upgrade to 8GB?

My computer is a Power Mac G5 Dual 1.8 PCI (4 RAM Slots)
Is there any way I can break out of the 4GB RAM limit into the world of 8GB RAM without having to buy a newer computer. I need to open a large 4.5GB TGA file in After Effects (48000 pixels x 36000 pixels).
Failing that, is there an application like RAM doubler I could use temporarily to get me though this job?
Power Mac G5 Dual 1.8 PCI (4 RAM Slots) Mac OS X (10.4.10) Currently have 4GB RAM installed

If there is not enough RAM, OSX will use space on the disk drive, so the amount of RAM should not limit the file size an application can handle, but speed will be reduced. 32-bit addressing can restrict the use of huge files, but there are ways that applications can get around it (at the expense of lower speed).
If After Effects has a file size limit, extra RAM will not help A later version (maybe using 64-bit mode) may handle larger files. 64-bit applications can be written to run in Tiger on G5s, but will be easier to write when Leopard is released.
You may be able to use some other application, such as Photo Shop, or Graphics Converter, to extract part of the TGA file, or reduce its size by changing its resolution, so you can use the result in After Effects.

Fan speed problem Power Mac G5 Dual 1.8 GHz PowerPC - please help

Please HELP, I have a fan speed problem with my Power Mac G5 Dual 1.8 GHz PowerPC
This is a NOT an Intel machine. I am running Mac OS X v10.5.8
Power Mac G5 - PowerMac 7,2 - Power PC 970 (2.2) - 1.8 GHz with 2 CPUs - L2 Cache (per CPU) 512 KB - Memory 8 GB - Bus Speed 900 MHz - Boot ROM version 5.1.5b1
I have included below Links to download a sound file (.m4a) that I recorded of the fan speed problem and both a .pdf and .spx files of my system profile.
download sound file
http://homepage.mac.com/rep3/filechute/myG5dualsFans.m4a
down load .spx file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.spx
down load .pdf file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.pdf
When did the fan problem start?
After I replaced the mother board on the computer.
Why did I replace the mother board?
Because the experts at apple agreed with my diagnosis that the major crash problems & kernel panics must have some thing to do with a logic board gone bad. They would not work on it, because this Power Mac G5 dual 1.8 GHz machine is now a legacy model.
What I have done to attempt to fix my fan speed problem? yes I checked the obvious things, here is a list:
1) yes I checked to be sure that the new mother board was the same part number as the original one, and that all things that were unplugged from the old mother board - were actually plugged into the new mother board.
2) all the fans work, I can see them spinning if I use a flashlight and look at them (cover on and off to get at some of them)
3) check all RAM to make sure: a) it was installed properly b) that the RAM worked using TechTool Pro c) even started the machine with only the original RAM that came with it.
4) I installed a Temperature monitor - to see if there was something reading as very hot inside that was causing the machine to continually run the fans at a high speed. No, no heat issues that I can see. Here are the reading from the sensors in degrees fahrenheit, 2009-10-11 16:11:01 -0500
CPU A Die Temperature: 75.7℉
CPU B Die Temperature: 81.5℉
Drive Bay: 68.9℉
Main Logic Board Air Inlet: 64.8℉
Main Logic Board Ambient: 73.6℉
Main Logic Board Backside: 76.3℉
Memory Controller Heatsink: 93.2℉
Processor Card A Ambient: 77.5℉
Processor Card B Ambient: 77.0℉
5) zapped the PRAM
6) followed the SMU reset instructions for
Power Mac G5 (Late 2004)
To reset the SMU on a Power Mac G5 (Late 2004) computer, simply do the following:
• Turn off the computer by selecting Shut Down from the Apple menu or by holding the power button until the computer turns off.
• Remove the power cord from the computer.
• Wait two minutes.
• Plug in the power cord.
• Turn on the computer.
7) followed the SMU reset instructions:
Resetting the Cuda/PMU
How to reset the PMU:
• If the computer is on, turn it off.
• Disconnect ALL cables from the computer, including peripherals and power.
• If possible, move the computer to a place where you are not standing on carpet.
• Open the case and ground yourself by touching part of the metal frame inside the computer.
• Find the Cuda or PMU button
• Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
• Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
• If the computer still does not respond after resetting the PMU, the computer may require service from an Apple Authorized Service Provider.
8) ran disk utilities, repaired permissions
9) found a setting in the system preferences that a chat room person suggested had something to do with fan speed. In Energy Saver, under options, processor performance was set to highest, I set it to automatic - this did not change anything that I could tell - BTW I checked my other G5 (a single processor that works fine) that is the setting that that it is set to, and it is nice and quiet.
10) restarted the machine, ..
11) found a Fan Control System Update - but it did not install when I tryed to install it -
12) booted from OSX install disk and ran that disk utility
13) used OnyX to fix disk permissions, clear caches and temp items
Nope - still have the same high speed fan problem. ... PLEASE HELP!!
I have been reading in the MacInTouch reader reports - found this: some one said to use this - thermal re-calibration using the Apple Authorized Service Providers' disk - but that's not available, at least I can not find it - anyone? have an answer to finding this - or can do it for me? I am in Chicago.

The Genius at the downtown apple store said that because it's a "legacy machine" they would not work on it, .. so should I push them?
Well, I personally think that's ridiculous, I'd Push them, I'd call AppleCare & talk up the chain if need be... there the ones that have or should have that Disc... man o man... Personally I'll never visit an Apple Store again in my lifetime, maybe try an independent AASP if none of that helps!..
http://tinyurl.com/ykomqkn
Man-o-man, pop my cork before I explode on that one, if I had anything to do with it I'd close that store.

Power mac G5 dual, startup and fan problem

Dear macpeople,
I have a Power mac G5 dual, 1.8 ghz, ramm 4.5GB. I guess from 2004. Only added more Ram three years ago. Never had any serious problem till a week ago. I have read a lot of similar questions and responses on my problem in this forum but till so far i have not been able to solve it.
Since a couple of weeks my mac sometimes did,nt recover from sleep. Starting up gave me some trouble because the fans were racing like **** and i had to restart several times to be able to boot normally. In the beginning just the upper fan next to de CD player ran fast and loud but now all of them get crazy at start up. Very rare times G5 is able to recover this (fans slowing down) and boot up, but this only in the safe mode.
I have cleaned the mac
i have resetted PRAM
i have used utility disk, all ok
i have unplugged for 40 min, reset in the machine, safe start up.
Checked memory
The only way to boot is in the safe mode. The fans start blowing fast but after 4 min. they slow down then the blue screen appears and mac builds up normally. But when i leave it for more than 1 hour in the sleep mode it will not recover, although i hear the normal sound of awaking/ accelerating disc. The screen keeps black and after a few minutes fans start blowing at full speed. Pushing 4 sec. the on/off button pulls it off.
I hope that someone can help me to solve this problem (me not being a tecnician at all) or that someone can give me a kind of diagnostic so that i can check the costs of profesional reparation. And start saving money for a new machine.
Any one any clue? Help would be very apreciated
Thnks

See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Power Mac G5 Dual Core freezing

Similar Messages

Maybe you are looking for