Power Mac G5 DVD burning failed Error code 0x80020022

I have a Power Mac G5 and every time I try to burn a DVD it gives me this error: Burning the disc failed because communication to the disc drive failed. (Error code 0x80020022)
Has anyone contacted support about this? If anyone has contacted support and got this problem solved, please share your experience with us
Thanks!

The same thing happened to me in September, and I had to delete my entire computer and start over. I just received the same error againt today and I don't want to have to start over again. Were you able to resolve it?

Similar Messages

  • DVD Burn fails (Error code 0x80020022), newish drive, just applied updates

    Hello,
    when i try to burn a data dvd with a variety of files from finder on my power mac g5 it thinks a while and then fails with the message:
    Burning the disc failed because communication to the disc drive failed (Error code 0x80020022)
    I just downloaded the latest OS updates last night.
    Disc utility showed permissions problems in some files on my boot drive including in a darwin folder but they repaired fine.
    Two weeks ago apple replaced my superdrive and i hadn't tried burning a dvd since then, but cds did and do burn fine.
    This computer is under warrantee but in case the latest software updates caused this, or if someone has an easy fix that would allow me to save the trip to the store for analysis and potential couple day wait...
    i'm all ears!
    Thanks, Will
    Software overview
    System Version: Mac OS X Server 10.4.8 (8L127)
    Kernel Version: Darwin 8.8.0
    SONY DVD RW DW-U21A:
    Firmware Revision: AADB
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    hardware
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (2.2)
    Number Of CPUs: 2
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (2.2)
    Number Of CPUs: 2
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Power Mac G5   Mac OS X (10.4.8)  

    Thank you for your help!
    At one point in the last few days i did run out of disk space on one drive, but i think i had 5Gig free on the short drive when i was trying it earlier, and i have upped that to 30.
    My spindled HP DV-16Xs worked on the drive i had before pretty darn well.. I've tried a bunch of unlabeled ones, i've also tried burning at 1x, and i went out and bought some jewel cased verbatim dvd-r 16Xs, same problem.
    I will take one more shot at finding the best media using that website, get some 8Xs if i can find them, before hauling it into apple.
    without the dvd burner it's hard to backup very well, I was planning to get a external hard drive next month.

  • ITunes 7.3 failed back up data DVD burn had error code 261(0x00000105).

    Just bought a bunch of new songs and went to back them up in iTunes 7.3 and I keep getting error code 261(0x00000105).
    Any ideas? Did not have this problem in prior versions. Brner works fine with other programs.
    Thanks!
    Home Brew   Windows XP Pro  

    Keep getting the same error as well. Run cd/dvd diagnostics and it should tell you... "The last failed data CD or DVD burn had error code 261(0x00000105)".

  • My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

    My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

    That code is not really useful since it just means it can't write DVD's (or probably CD's).  The only thing you can do is first to try a different brand of DVD's, higher quality.  You could also try burning at a slower speed.
    Based on the fact that you are using an OSX that's no long supported, there's probably not much you can do to correct this issue if it is software related.  You may also have a failing Super Drive, another consequence of an older Mac.

  • I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    Reset the SMC, as per > Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then retry the Disc Drive.

  • I am trying to burn a CD and keep getting this error message: Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Sadly, that error has umpteen causes, sometimes the drive is going out, sometimes it's bad media, sometimes a slower burn works, & rarely a Cleaning Disc helps.
    Bad File names can even cause it...
    http://www.bbqiguana.com/2010/02/macos-x-error-0x80020022-trying-to-burn-dvds/

  • DVD DL failed, error code 0x26, 0x00 ?

    Made project in iDVD 6.0.4, going to burn DVD DL Verbatim disk, encoding gets all the way to finish and starts to write to disk, disk spits out with error code >The recording device reported the illegal request: Invalid field in parameter list. (0x26, 0x00)< iDVD 6.0.4 will make a disk image, and I can burn a DL disk in Toast 9, although a bit worried about the dual layer issue which comes as a warning from iDVD 6.0.4, anybody had similar problems with LaCie disk writers? Obviously iDVD 6.0.4. sees it, System Profiler, Under Disk Burning, Burn Support, it says YES (Unsupported).
    Had no problems with LaCie 16x burner, in for repair at present?
    Any suggestions welcome.

    Hi, thanks for the reply, apologies, I have not have made it clear.
    My internal drive has long gone, working with a firewire, LaCie,22x+-RW burner external. System profiler I have previously noted. I am quite happy to make a disk image first, then burn through Toast 9, which I agree with you is brilliant, just worried about iDVD's warning about layer break. My gut feeling is that Toast 9 has moved on a lot from 6, which gave me problems when I came to playback on TV screen. Also the DVD readers have also moved on, would still like to burn from within iDVD 6.0.4 to be safe as one can be, hence seeking advice if I am missing something on my set up.
    Kind Regards, G. Jackson.

  • When trying to burn files to a DVD (DVD RDL from Memorex) an error message appears saying: Impossible to burn the disk because communication failed between disk player and computer (error code 0x80020022)

    When trying to burn files (1,7 GB) to a Memorex DVD, an error messge says: Impossible to burn the disk because communication between disk player and computer failed (error code #  0x80020022).
    Is the Memorex incompatible with my i-Mac or what could it be ?
    My i-Mac is a 21", Core 2 Duo with 3.06 GHz. RAM is 8Go 1067MHz DDR3.
    Thanks.

    That message is usually caused by poor media. i.e. poor coating quality.
    Mermorex is generally regarded by most users here as poor quality media. So is TDK. Most of us prefer Verbatim, Fuji, Maxell or Taiyu Yuden DVD-R.
    Also burn at only 2x or 4x burn speed.

  • Why do I keep getting the following error message error code 0x80020022 when I try to burn a DVD using Mac Finder?

    Why do I keep getting the following error when I try to burn a DVD using Mac Finder?
    "The disk can't be burned because communication between the computer and the disc drive failed (error code 0x80020022)."

    I forgot about this since I upgraded to an external burn drive but I used to get this error whenever I tried to used a DVD or CD Blank Disc that was a DVD + R or a DVD +/- R or RW Disc Try using only the DVD -R or DVD -RW Disc   (Minus sign - )

  • Has anyone solved the "Error Code 0x80020022"

    "The disc can’t be burned because communication between the computer and the disc drive failed (error code 0x80020022)."
    I have researched this at length as I have just been getting this message, but I don't see how to resolve it.
    Has it ever been resolved and if so, I would really like to know how.
    Cheers

    Michael,
    An update on the ongoing superdrive error:
    At the time I responded to your post, I was burning DVD+Rs because my superdrive didn't like -Rs very much and would error out on them. Yesterday, to test my theory on Disk Warrior, I bought some DVD-Rs and burned about 3 in a row successfully before I got the 0x80020022 error again. I ran Disk Warrior again and have been burning the -Rs consistenty (I have a lot of junk to archive off my HD.) But I thought that the type of media might be important to the conversation because the superdrive appears to like one type of DVD blank over another.
    Some key points:
    1) You said you're using a Mac Mini as your bootup disk. I am using a MacBookPro. This may be significant.
    2) Because the error reappears routinely, this is by no means a complete fix. It needs to be repeated when the error reappears. However, in lieu of a more permanent solution, I'll take one that appears to work, even temporarily, until Apple or somebody out there can tell us how to fix this more permanently.
    3) Because it appears to be fixed after running Disk Warrior, I am going to conclude that it is a software error, one of the operating system not communicating with the superdrive, and has little or nothing to do with the drive or the media, as I've read on other forums regarding this error. Of course, if your drive really has gone bad, who's to say that it won't prompt the same error, if it is an all-purpose error. I had my superdrive replaced last year, so I'm pretty sure it's not the drive.
    Jim

  • I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? Thanks

    I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? I have tried rebooting through PRAM and various other options that I found online, but nothing has helped.
    Thanks

    Try using a different brand of DVD's.

  • DVD Burn fail, Sense Key = Hardware Error, Sense Code = 0x09, 0x01, TRACKING SERVO FAILURE, What could be the solution?

    DVD Burn fail, Sense Key = Hardware Error, Sense Code = 0x09, 0x01, TRACKING SERVO FAILURE, What could be the solution?

    There is only one option and that is to replace the drive. It is not expensive to perform the replacement yourself if you so choose.

  • DVD burner not working Error code 0x80020022 & 0x8002006E

    When I try to burn a DVD I get the following errors . (Error code 0x80020022) & (0x8002006E)
    When I put a dvd movie in it will show on the desktop and play in dvd Player.
    It will show a CD in the finder and will play it in the finder and in iTunes. iTunes is can also burn CD.
    I have brunt some dvds in the past month but it was hit and miss. Now I can not burn any dvds.
    I booted up my iMac from my MacBook when I go to burn the dvd I get the same error. So now I'm not to sure if it is a software issue. I have also done a restart while holding P & R "option & Apple" to reset the Pram.
    I'm going to erase the HD tonight and reinstall OS 10.5 to see if that fixes the problem.
    If there is anything more I can do please let me know. I dont mind replacing the Supper Drive but I dont want to spend the money if that is not going to fix the problem.

    I keep getting this code come up when i try to burn 0x80020022. My imac is 8 months old, and after looking on mac forums the only thing that seems to work is to go in and play around with the international system prefs. It will then burn a CD, although very slowly. A week later I go to burn a cd and this happens again! This surely can't be right with an 8 month old machine, and does this mean my DVD drive is going to die soon? I can't keep having to adjust the prefs every week.
    Does anybody have any answers?
    Cheers

  • The last failed audio CD burn had error code 4900.

    Has anyone come across what error code 4900 refers to? I have searched throughout the forum, but found no specific answer. This error occurs every time I try to burn a disc using a CD-R. Any help would be greatly appreciated. Thanks in advance.
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    HP Pavilion 061 DQ177A-ABA A450N
    iTunes 7.0.2.16
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.1
    LowerFilters: PxHelp20 (2.0.0.0), CDR4_XP (7.1.0.188), PFC (2.5.0.204), AFS2K (3.1.21.0),
    UpperFilters: Cdralw2k (7.1.0.188), GEARAspiWDM (2.0.6.1),
    Video Driver: NVIDIA GeForce FX 5200 \GeForce FX 5200
    IDE\DiskST3160021A_____________________________3.06___, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
    USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
    USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
    USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
    IDE\CdRomRICOHDVD+RW_MP5240A____________________1.11___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGCD-ROM_SC-148C__________________B100___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    I: RICOH DVD+RW MP5240A, Rev 1.11
    Drive is empty.
    P: SAMSUNG CD-ROM SC-148C, Rev B100
    Drive is empty.
    The last failed audio CD burn had error code 4900(0x00001324). It happened on drive I: RICOH DVD+RW MP5240A on CDR media at speed 8X.

    bump2.

  • "The last failed audio CD burn had error code -128(0xffffff80)"

    Prior to the iTunes 7.0 update I had no problems burning discs from iTunes. Now, after the update I can begin burning, seem to burn a few tracks, before the whole system crashes causing a reboot. The drivers are up to date, and the drive is functioning correctly. Here is the diagnostics report:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Hewlett-Packard Pavilion zx5000 (DS476U#ABA)
    iTunes 7.0.0.70
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.0),
    Video Driver: MOBILITY RADEON 9200\MOBILITY RADEON 9200
    IDE\DiskWDCWD800UE-22HCT0_____________________09.07D09, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STDVD+RW_GCA-4040N_______________1.17___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: HL-DT-ST DVD+RW GCA-4040N, Rev 1.17
    Drive is empty.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVD+RW GCA-4040N on CDR media at speed 0X.

    I guess I should also ask, is anyone else having their system crash after part way through burning an audio disc? And better yet, has anyone had this problem and then been able to fix it? Or, does anyone know how to resolve this if it can be resolved with the current 7.0 build.

Maybe you are looking for

  • HT201303 How can I change my billing details?

    I've been overseas for a year, cancelled my last visa debit card then and now want to update the details so I can make purchases but iTunes is asking me for my security code from my old card which I don't have! I already called Apple and they couldn'

  • Capturing NTSC into FCE with a PAL-Camcorder?

    Hi. I have mini-dv cassettes with videos in ntsc format. Is it possible to capture these videos using my PAL mini-dv camcorder via firewire to fce hd3.5? It sounds weird bec generally you cant use a PAL mini-dv camcorder to play a mini-dv in NTSC for

  • Diffrent Data Type & Formula in Cross Tab

    Post Author: ade CA Forum: General I using crystal reports 8.5. I make cross tab like this to viewing reportsSubject           Evaluation Aspect                          Score1        Score2            Score3        Score4        Score5 Math         

  • Photos not in folders

    how can I get my photos to sync into folders ? using windows 7 os

  • Two table maintenance generator for one table

    Can we created two table maintenance generator for one ztable. if yes then what will be the steps.