Power Mac G5, more than two internal HD

Can the Power Mac G5 support more than two internal hard drives?
If no, what are recommended solutions for inexpensive external storage? I work with standard definition video so I'm thinking FW800 would be ok. Thoughts?
Thanks,
jeremy
Power Mac G5 Mac OS X (10.4.8)

It sure can.
Depending on how crazy you want to get, the Power mac will hold up to 11 drives!
For internal solutions
Swift data has a system that will hold 3 extra drives with their Swift Data 200.
http://transintl.com/store/category.cfm?Category=2490&RequestTimeOut=500#top
Maxupgrades has a number of systems that will hold up to 9 extra drives with their maxconnect system
http://www.maxupgrades.com/istore/index.cfm?fuseaction=category.display&category _id=306
For external solutions
Depending on wether you want Firewire or eSATA
eSATA
I am going to buy this when i get $$$
Quite a good system, speeds up to 500 Mb/s
you need to buy a PCI card as well.
http://www.sonnettech.com/product/fusion.html#compatibility
or
Transintl has decent one as well
http://transintl.com/store/category.cfm?Category=2600#top
or
Maxconnect also has one
http://www.maxupgrades.com/istore/index.cfm?fuseaction=category.display&category _id=313
Firewire
This catagory is very vast. Almost every company has firewire solutions.
If you want one that matches your Beautiful Powermac
Transintl again, has a nice one
http://transintl.com/store/category.cfm?Category=2597#top
or
Lacie
http://www.lacie.com/products/range.htm?id=10033
I think Maxtor amkes decent enclosures. Mine is very reliable
Just do some research on what you find, compare prices and transfer speeds.
work out prices with taxes and shipping
and compare the transfer speeds in the $$ range you are looking at.
let us know what you decide on
Good Luck
Andrew

Similar Messages

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!

Maybe the problem is not your MB Air......
Try these:
Make sure bluetooth is turned off if you're not using it.
Set your screen brightness to 4 bars.
See what's loading in your login items. Delete the ones you don't need.
Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
Highlight the ones with the highest %CPU and hit quit process.
Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness.

Can I run more than two Mac OS X virtual guests on a Mac host?

The way I read the Mac OS X 10.10 Yosemite license (http://images.apple.com/legal/sla/docs/OSX1010.pdf), I am not allowed to run more than two (2) virtualized Yosemite guests on a Mac virtual host:
(iii) to install, use and run up to two (2) additional copies or instances of the Apple Software
within virtual operating system environments on each Mac Computer you own or control that is
already running the Apple Software, for purposes of: (a) software development; (b) testing during
software development; (c) using OS X Server; or (d) personal, non-commercial use.
There's no exception for running guests on a large Mac Pro, or anything like that.
I just want to confirm I'm interpreting this part of the license correctly? Thanks for any feedback!

Don't think that this will work, despite PSE 8 not being that old. Undoubtedly some of the security and file system changes in OSX 10.7 and 10.8 are at play here thast the installer can't cope with... Consider getting PSE 11.
Mylenium

Not able to select more than two values

Based on picklist.fmb, I created a list item in a form.
I am able select many values using SHIFT but I am not able to pick more than two values using CTRL key.
Anything I did mistake or picklist won't support picking more than two values using CTRL?
Also I am not able to get the scroll bar attaching to this list item.
Please advise.
Thank you,
Prasad

hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

Not able to view more than two line in table control

Hi all,
I am not able to see more than two lines in table control. Although my table control height is 21...
Please see attached pic and suggest me what to do.

hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

How to allow more than two users on remote desktop on windows server 2012 foundation?

i have a dell server power edge T300 with windows server 2012 foundation. I am unable to connect more than two remote desktop at once.

Hi,
Add to Brain, you cannot have more than 15 user accounts in Windows Server 2012 Foundation.
In order to access a hosted application, such as Microsoft® Office, a license for Windows Server 2012 Remote Desktop Services is required for each user account (not to exceed 15 user
accounts) that directly or indirectly uses RD Gateway to host a graphical user interface, including using Remote Desktop Connection (RDC) client. When using Remote Desktop Services, you may not install or use Remote Desktop Connection Broker or Remote
Desktop Virtualization Host role services. For more information about Remote Desktop CALs , see http://go.microsoft.com/fwlink/?LinkId=140238.
http://technet.microsoft.com/en-us/library/jj679892.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Bug? My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future.

My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future even though I can see them on the month, week and day view. Any suggestions on how to fix it? I've tried it all. I called the apple support and they checked on their iPads. They all did the same and they couldn't help me. They suggested trying this way. I'd like to be able to plan a few years ahead and the year view would make thing so easy!
Is this a bug?

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Not able to Render more than two asset type in a drop zone on page

Hi All,
I have created two different assets by making two different flex family.
I need to render these two assets in a single drop zone on a page.
Can some one tell me how is it possible to make a drop zone on page which will be able to take two different type of assets because while creating Page attribute when i select page attribute of type asset there is no option through which i can select more than two asset types.
Thanks & regards,
Ankur Bhatia

Hi Rodney,
Thanks for ur Reply.
While creating page attribute on admin site,when we select attribute type as "asset" a dropdown list comes just below through which we can select only a single asset.
how to use a list option here or how can we create it so that it can be used with various asset types.
Also in avisports site there is no drop zone which can contain more than one asset of different type.
The Drop zone contains here all the assets of same type.
Thanks and Regards
Ankur Bhatia

How can i use IDSM-2 in inline mode for more than two VLANs?

can i use the IDSM-2 in inline mode to be ips to more than two VLANS
like this or it isn't
intrusion-detection module 5 data port 1 access-vlan 10,20,30,40,50
intrusion-detection module 5 data port 1 access-vlan 100,200
thank u all for your help

The IDSM-2 ports need to be configured as trunk ports with multiple vlans rather than as access ports.
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517eb.html#wp1068377
And instead of creating an inline interface pair by pairing Gig0/7 with Gig0/8 within the IDSM-2 configuration, you would create inline vlan pairs.
With an inline vlan pair you pair 2 vlans on the same interface.
You can have up to 255 inline vlan pairs on each interface (assumining you keep the total traffic from all of the pairs within the IDSM-2s performance limit of around 500Mbps)
How to create inline vlan pairs:
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517bb.html#wp1047852
The other aspect you need to be aware of is that not all IOS versions will support configuring the IDSM-2 data ports as trunk ports for inline vlan pairs.
Your best bet is to use 12.2(18)SXF4 or a later version on the 12.2(18)SXF train.
The 12.2(33)SR train does not currently support the trunk feature for the IDSM-2.

I have very little space left on the hard drive on my macbook, on my storage report it says "other" is taking up more than two thirds of the space on the hardrive. How can I identify what these files are?

I have very little space left on the hard drive on my macbook, on my storage report it says "other" is taking up more than two thirds of the space on the hardrive. How can I identify what these files are?

Hello,
There is free software you can download that gives you a graphical image of what files are used on your hard drive. http://www.derlien.com/
This may help you clean down your hard drive for more space.
Best of luck

Since the recent update, my Text Messages no longer permit me to send messages to more than two people at a time. How do I resolve this issue?

Since the most recent update, my IPhone 5c no longer permits me to send text messages to more that two people at a time. How can I resolve this to send text messages to more than two people in a group message.

It would appear that I can send an SMS to multiple contacts, providing that it's not a forwarded message. This means that I have to start from scratcheach time, and then I can send it to over 30 recipients at a time. Not sure why though, and I'm not sure why the sign doesn't appear all of the time as an option for me to press. At other times, it is particially obscured by the curser/text box. This is obviously a glitch in the system, as it happens inconsistently.

How can I compare more than two VIs at a same time in labview 2009

How can I compare more than two VIs at the same time. I am an Lab Engineer I have to check assignments submitted by students and I want to know how many of them are copied from each other. Labview compare VI can only compare two VI at a time while I want to check about 30 VIs at same time.
Regards,

I'm not aware of a tool to compare multiple VIs. If you don't find anything, consider posting this to the LabVIEW Idea Exchange to expose this idea directly to NI R&D.
Thanks!
- Greg J

No home phone service for more than two months

I am sending this note on behalf of my mother. She has been waiting for technical services to her home phone for more than two months. She has received dates where a technician would come out to repair her services in which she has left work early or stayed home on weekends no avail. My mom is not in best health and has a child with disabilities living in the home and it is imperative that her services are working. It is frustrating to her to pay for a service she's not receiving. This is the worst customer service experience from Verizon.
I am asking for immediate resolve to this issue and to work with us to assure payment for time where phone has not worked Will not be charged to her account. Please contact me {edited for privacy}.

Hi lmatthews522,
Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one?

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?

If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
Or take it to a genius bar if you have one near?
Or further explain what setting you are needing fixed back and im sure someone here can help you for free!

How can I download to one excel sheet from more than two table?

Hi.
as you know
<SAP_BW_URL CMD='EXPORT' FORMAT='XLS' DATA_PROVIDER='DATAPROVIDER_T1' >
this script can make download excel sheet which is same cotents of table or chart in web template.
but if template has more than two tables how can we get excel sheet from tables?
<SAP_BW_URL CMD='EXPORT' FORMAT='XLS' DATA_PROVIDER_1='DATAPROVIDER_T1' DATA_PROVIDER_2='DATAPROVIDER_T2'>
I hope this gonna work but result was fail same as I expected.
is there any way put two tables download one excel sheet?

Welcome to SDN.
Post this in Business Explorer forum for quicker resposne.
SAP Business Explorer (SAP BEx)
Regards
Raja

Power Mac G5, more than two internal HD

Similar Messages

Maybe you are looking for