Power Mac G5 not starting up properly

When I power on my G5, I get the apple screen and the swirl below that it is loading....then monitor screen suddenly goes to black & "no signal" displayed on the screen. Any ideas what the problem is and how to fix? Thanks.

Good morning! Here's where I am now.
1. Did safe boot>finder>disk utility>.calculate image checksum (CRC-32)> select disk 149.1 GB ST3160815AS>Verify disk permissions......result: permissions verification complete--looking at details log, shows several instances of "Permissions differ on: System/library/coreservices/front row.app, System/library/Private F Frameworks/backrow/framework; or.../Private Frameworks/BackRow.framework; or.../Private Frameworks/DotMacSyncManage; or...Extensions/iousbmassStorageClass.kex;or.../SystemProfiler/SPDisplaysReport er.spre... Also log shows ACL found but not expected on Applications/Utilities.....also on Applications....and also on Library. I didn't understand any of it, so don't know if this is meaningful.
2. Then did Repair Permissions.....result: Permissions repair complete.
3. Verify Disk....result: Volume appears to be OK . At this point, Repair Disk button was not available.
4. System Preferences>Other row.....shows Apple Qmaster. Could not find any of the other items you mentioned...private/var/run/startupitems, etc...They were not listed in the Systems Preferences folder, so don't know where else to look.
5. Other info: the monitor is a 24" Soyo I have been using with a Windows PC, and it is connected to the G5 through the DVI port using an Apple DVI-VGA adapter. From the "About this Mac" folder. the graphics card is ATI Radeon 9600 XT, and the Monitor Resolution is listed as 1280x1024@60Hz. There is a heading of "Display Connector:" which lists Status; No Display Connected. Then, in System Preferences>Displays, shows VGA Display, and lists resolutions, with 1280x1024 highlighted.
6. Did a restart....Same results as previously, Apple grey screen with swirl for about 15 secs., then black screen and no signal.
Thanks BDAqua, and Arigatoo Gozaimasu, Japamac. I'm not ready to give up yet, so any other suggestions are appreciated.

Similar Messages

Power mac will not start

my brother just bought the new 27inch imac and was going to migrate from his power mac. his power mac is now dead. it will not start at all. any ideas

I decided to get a hard drive enclosure. I chose the Mercury Elite Pro...highly recommended in my Mac magazines.
The ones from OWC are easy to put drives in, even for a beginner. Easy to understand instructions and they back up their merchandise 100%, no questions asked. Now if a drive goes bad, I can put a new one in the enclosure in minutes (or put a bigger one in). Mine works great!
But make sure you get an enclosure that uses the PowerMac drive. Since you did not tell us what model he has we can not advise as to which one he needs.
Once the Migration is over, he can reformat the drive to GUID (for Intel) and use it as a backup drive....always needed! DALE

My power mac would not start it flashing the glob signal

I was trying to start my power mac this morning but it keep flashing the globe signal on a gray screen, I cannot use my mac
can some one know how to fix it?

That results from the Startup Disk preference having somehow been set to NetBoot volume, as discussed in this Aple KBase article -
http://support.apple.com/kb/TA25439?viewlocale=en_US
The solution is to wait it out until it finally boots normally - this can take several minutes. Then correct the setting in Startup Disk (in System Preferences).

My I Mac does not start properly without pressing option and apple keys ,and it freezes

My I Mac does not start properly without pressing option and apple keys ,and it freezes

Try any of the following:
http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Troubleshoot the spinning beach ball/freezing & crashing

My Intel Mac does not start.

My Intel Mac does not start. When I turn it on I hear a loud beep (a sound I never heard before) and then I see the spinning wheel and nothing else. I tried to start from the installation disc, I also try to reset the SMC and the PRAM. Nothing worked. I replaced the RAM cards too. It is a IMac 24"/2 Intel. Model number A1200 2006.

When I turn it on I hear a loud beep
Beeps are an indication the RAM (memory) is failing or has failed.
Power On Self-Test Beep Definition - Part 2
If you feel confident doing this, you can purchase RAM online. Crucial comes highly recommended. You can use their scanner > Memory upgrades from Crucial.com - Crucial Mac System Scanner
And uninstall the bad RAM, then reinstall new > iMac: How to remove or install memory
Or, take your Mac to an Apple Store.
The beep sound is not permissions related.
Message was edited by: CS

My vintage Power Mac will not power on. The power on button lights up, but dims after releasing the button. What is the problem?

My vintage Power Mac will not power on. The power on button glows bright when pressed, but dims to off after releasing the button. What is the problem?

The battery is the PRAM battery:
Your Mac stores certain settings in a special memory area even if it is turned off (unless there is a battery issue as described below). On Intel-based Macs, this is stored in memory known as NVRAM; on PowerPC-based Macs, this is stored in memory known as PRAM. Information stored in NVRAM or PRAM may include:
Speaker volume
Screen resolution
Startup disk selection
You may need to reset the NVRAM or PRAM if you experience issues related to these functions. For example, if your Mac starts up from a startup disk other than the one you've specified in Startup Disk preferences, or if a "question mark" icon appears briefly when your Mac starts up, resetting NVRAM or PRAM may help.
http://support.apple.com/kb/HT1895#
Replace the battery and reset the PRAM.
Resetting your Mac's PRAM and NVRAM - Support - Apple
Can I purchase a replacement battery at Walmart?
Likely not.
Order one at OWC for the best price ($20+ at Radio Shack):
NewerTech 3.6VPRAM 3.6v Lithium 1/2 AA PRAM... in stock at OWC
But have not sure what a PSU is or how to test it.
PSU- Power Supply Unit.
Then the steps that I deswcribed may be a bit advanced for you?
The PSU is the gray box at the top rear of the interior, the box to which the power cord is attached and has the fan blowing hot air out.

Help me please! (The WebLogic Server did not start up properly)

bc14.jar;C:\bea\WEBLOG~1\server\lib\wloracle.jar;C:\bea\WEBLOG~1\server\lib\wlsq
lserver.jar;C:\bea\WEBLOG~1\server\lib\wldb2.jar ;C:\bea\WEBLOG~1\server\lib\wl
sybase.jar;C:\bea\WEBLOG~1\server\lib\jConnect.jar;C:\bea\WEBLOG~1\server\lib\wl
informix.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\
ant\ant.jar
PATH=C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\b
ea\WEBLOG~1\server\bin;C:\bea\jdk142_05\jre\bin;C:\bea\jdk142_05\bin;C:\bea\jroc
kit81sp4_142_05\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\mysql\bin;C:\Program File
s\Java\jdk1.5.0\bin;;C:\bea\WEBLOG~1\server\bin\oci920_8;C:\bea\WEBLOG~1\server\
bin\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\[hostname]:[port]\console *
<21.Ara.2004 21:17:08 EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
ic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120
-20041118-1131-win-ia32 from BEA Systems, Inc.>
<21.Ara.2004 21:17:09 EET> <Info> <Configuration Management> <BEA-150016> <This
server is being started as the administration server.>
<21.Ara.2004 21:17:09 EET> <Info> <Management> <BEA-141107> <Version: WebLogic S
erver 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
<21.Ara.2004 21:17:10 EET> <Notice> <Management> <BEA-140005> <Loading domain co
nfiguration from configuration repository at C:\bea\user_projects\domains\jspned
ir\.\config.xml.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: Exc
eption thrown in operation getMBeansFromURL - with nested exception:
[javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]'
Reason: weblogic.management.configuration.ConfigurationException: Exception thro
wn in operation getMBeansFromURL - with nested exception:
[javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]
C:\bea\user_projects\domains\jspnedir>

bc14.jar;C:\bea\WEBLOG~1\server\lib\wloracle.jar;C:\bea\WEBLOG~1\server\lib\wlsq
lserver.jar;C:\bea\WEBLOG~1\server\lib\wldb2.jar ;C:\bea\WEBLOG~1\server\lib\wl
sybase.jar;C:\bea\WEBLOG~1\server\lib\jConnect.jar;C:\bea\WEBLOG~1\server\lib\wl
informix.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\
ant\ant.jar
PATH=C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\b
ea\WEBLOG~1\server\bin;C:\bea\jdk142_05\jre\bin;C:\bea\jdk142_05\bin;C:\bea\jroc
kit81sp4_142_05\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\mysql\bin;C:\Program File
s\Java\jdk1.5.0\bin;;C:\bea\WEBLOG~1\server\bin\oci920_8;C:\bea\WEBLOG~1\server\
bin\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\[hostname]:[port]\console *
<21.Ara.2004 21:17:08 EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
ic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120
-20041118-1131-win-ia32 from BEA Systems, Inc.>
<21.Ara.2004 21:17:09 EET> <Info> <Configuration Management> <BEA-150016> <This
server is being started as the administration server.>
<21.Ara.2004 21:17:09 EET> <Info> <Management> <BEA-141107> <Version: WebLogic S
erver 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
<21.Ara.2004 21:17:10 EET> <Notice> <Management> <BEA-140005> <Loading domain co
nfiguration from configuration repository at C:\bea\user_projects\domains\jspned
ir\.\config.xml.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: Exc
eption thrown in operation getMBeansFromURL - with nested exception:
[javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]'
Reason: weblogic.management.configuration.ConfigurationException: Exception thro
wn in operation getMBeansFromURL - with nested exception:
[javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]
C:\bea\user_projects\domains\jspnedir>

EyeTV: Mac does not start automatically

Mac does not start automatically for EyeTV recordings. I reinstalled EyeTV but it did not help.
Any help appreciated.
iMac i5, 2,7Ghz, OS X 10.7.4
Kind reagards,
Torsten

I have to same problem: Bought Elgato Sat 3 years ago. Now I decided to install it in the living room and bought a new i5 Mac mini. EyeTV works fine but does not wake up Mountain Lion 10.8.2 sometimes.
When I program wake up events manually via System Preferences or pmset command in the terminal, all works fine and my Mac wakes up. I tried everything, from clean reinstall to debugging AutoWake.plist and such.
Annoying!

The WebLogic Server did not start up properly.

Hi Everybody,
I am quite new in BEA product, actually with weblogic integration. I get an issue when I tried to start Weblogic integration.
I used Weblogic integration 8.5 on my Windows box and JDK 1.4.
When I tried to start it I get the folowing error:
The WebLogic Server did not start up properly.
java.io.InvalidClassException: javax.management.MBeanAttributeInfo; local class
incompatible: stream classdesc serialVersionUID = 7043855487133450673, local cla
ss serialVersionUID = 8644704819898565848
at java.io.ObjectStreamClass.initNonProxy(Ljava.io.ObjectStreamClass;Lja
va.lang.Class;Ljava.lang.ClassNotFoundException;Ljava.io.ObjectStreamClass;)V(Un
known Source)
at java.io.ObjectInputStream.readNonProxyDesc(Z)Ljava.io.ObjectStreamCla
ss;(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Z)Ljava.io.ObjectStreamClass;
(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Z)Ljava.io.ObjectStreamCla
ss;(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Z)Ljava.io.ObjectStreamClass;
(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unk
nown Source)
at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
urce)
at java.io.ObjectInputStream.readArray(Z)Ljava.lang.Object;(Unknown Sour
ce)
at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
urce)
at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
o.ObjectStreamClass;)V(Unknown Source)
at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
bjectStreamClass;)V(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unk
nown Source)
at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
urce)
at java.io.ObjectInputStream.readObject()Ljava.lang.Object;(Unknown Sour
ce)
at weblogic.management.internal.TypesHelper.getMBeanInfo(TypesHelper.jav
a:274)
at weblogic.management.internal.TypesHelper.getAdminOrConfigMBeanInfo(Ty
pesHelper.java:384)
at weblogic.management.internal.ConfigurationMBeanImpl.<init>(Configurat
ionMBeanImpl.java:137)
at weblogic.management.AdminServer.<init>(AdminServer.java:59)
at weblogic.management.AdminServerAdmin.initialize(AdminServerAdmin.java
:245)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:770)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
Do you have some idea why I get this error while starting the server?
Thank you in advance!

First you can start witht he example server, after installation go to start menu --> example--> launch the examples. which will create a sample domain and brings up the server etc., If you want your own domain, using configuration wizard create a domain(follow the steps mentioned in edocs.bea.com) and bring up the server.
-sadiga

Oracle Database Not Starting Up Properly

On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. I kinda figured that I wouldn't run into the exact same issue on Oracle VM. I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still here. I didn't find anything in this forum about the database not starting up, so I'm wondering if others are running into the same problem and how to resolve the issue. Thanks a bunch for your help.

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

3 year old Mac will not start up, help?

My 3year old Mac will not start up, just sits there and spins. Any suggestions on corrective steps?

Kurt412,
which version of OS X is installed on your MacBook Pro?

Xfce4-power-manager does not start, but after relogin - works

Hi all.
When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
diff log_1 log_2
35c35,36
< TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
> TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
> TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
51d51
< TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
System
Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
systemd 212-3
xfce4-power-manager 1.2.0-6
That bug start happening after one of last week updates. I don't have a package cache.
Can anyone help me?
p.s. sorry for a bad English.

Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
It starts from a login manager named LightDM.
AcpiD installed as a dependency.
logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
Last edited by theperfectblance (2014-04-17 06:57:32)

Mac does not start is asking me to reboot from back up

My Mac is not starting and is asking me to reboot from the time machine however it is showing me that the latest complete backup is form September. Should I reboot from there and once I am in I will be able to rescue latest backups or should I re-install the OS? If I re-install the OS will I loose everything or will things still be there, including folders that were loose in the desktop as opposed to being inside the hard drive?

Time Machine is not bootable.
Is it asking you to Restore from Time Machine?
Re-installing the OS X on top of what you have will preserve all files, photos, documents, settings, bookmarks, history etc this includes items on your Desktop.
Recovery http://support.apple.com/kb/HT4718
From Recovery you can also run the Disk Utility>Repair Disk to see if there is a problem, this may sidestep the need to Restore.
OS X Mavericks: Restore items backed up with Time Machine

The Web Logic Server did not start up properly

Trying to start Weblogic Portal Server
Result is :
# Note: Server initialization may take several minutes.
# Please be patient.
<Jan 26, 2002 11:45:43 PM EST> <Info> <Security> <Getting boot password from user.>
Enter password to boot WebLogic server:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic.management.internal.Helper.preloadMBeanInfos()V
from class weblogic.management.Admin
at weblogic.management.Admin.initialize(Admin.java:212)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
Press any key to continue . . .
What is goin on ??????

"Bernie Ferguson" <[email protected]> wrote in
news:3c7c6672$[email protected]:
>
Trying to start Weblogic Portal Server
Result is :
# Note: Server initialization may take several minutes.
# Please be patient.
<Jan 26, 2002 11:45:43 PM EST> <Info> <Security> <Getting boot
password from user.> Enter password to boot WebLogic server:
Starting WebLogic Server ....
**** The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method
weblogic.management.internal.Helper.preloadMBeanInfos()V from class
weblogic.management.Admin
at weblogic.management.Admin.initialize(Admin.java:212)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
**** Press any key to continue . . .
What is goin on ??????
I had this problem when I tried using Web Logic Server 6.1 SP2. When I
switched back to SP1 it was fine.

The WebLogic Server not starting up properly.

Hi Guys,
Can any body help me for following error with weblogic.
We are using weblogic 8.1 sp 4.
While starting weblogic server it displays following error.
==========================================================
<13-Oct-2006 09:13:07 o'clock BST> <Error> <Configuration Management> <BEA-150029> <There was an error reading the MBean mydomain:Name=cman_m1,Server=cman_m1,Type=ServerStart. The value {3DES}7wwcZnDbae0xMa4dJR/tOA== for attribute PasswordEncrypted could not be read successfully.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: [Configuration Management:150029]There was an error reading the MBean mydomain:Name=cman_m1,Server=cman_m1,Type=ServerStart. The value {3DES}7wwcZnDbae0xMa4dJR/tOA== for attribute PasswordEncrypted could not be read successfully.'
Reason: weblogic.management.configuration.ConfigurationException: [Configuration Management:150029]There was an error reading the MBean mydomain:Name=cman_m1,Server=cman_m1,Type=ServerStart. The value {3DES}7wwcZnDbae0xMa4dJR/tOA== for attribute PasswordEncrypted could not be read successfully.
==========================================================

create a new boot.properties file with usernam & password
and
Make the backup of cofig.xml file,
then Edit the config.xml
PasswordEncrypted={ksskjfhsdjfsdfhdk} server="Admin_WLS">
replace with
Password="weblogic" server="Admin_WLS">
restart the WLS now

Power Mac G5 not starting up properly

Similar Messages

Maybe you are looking for