Power mac G5 won't load OS

When trying to load the os into my powermac g5 I do control c and it starts but the I get the circle with the line through and that's it. I won't finish the loading of the os. What am I doing wrong? Do I need to format the hard drive or what? The drive had been wiped Before I bought the tower. Any help with this problem would be appreciated.

Mike, that is
Apple PowerMac G5 Install Discs, machine specific gray discs.
Version: Mac OS 10.3.5, Disc Version 1.1, 691-5202-A
Notes: Two disc set originally included with Apple PowerMac G5.
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349

Similar Messages

Power Mac G5 won't boot with Lion?

After installing Lion, my early Intel 2010 Power Mac G5 won't boot. There were no problems for the first 2 days. The third day my G5 wouldn't boot at all. Not using Lion's recovery function, many attempts to boot from a previous system disk, and firewire target mode. The keyboard seems to be dead after attempting to boot except for the DVD eject key. All I get is a grey screen with an icon of a folder with a question mark within the folder. This icon blinks on and off continuously. Since the keyboard isn't working, I can't reset the PRAM, start in safe mode, or any other keyboard commands. The failed boot doesn't even get far enough for the Apple window to open. I replaced the hard drive and accomplished nothing except for spending even more money and time.
This is VERY frustrating! Has anyone else had a similar problem with booting after Lion't installation??
Thanks.

1) you have a Mac pro Early 2009, remember this. It avoids confusion here in forum
2) you're HDD's OS cannot be found by the firmware of the Mac hence it results to a question mark
perform the following(recommended to use a USB keyboard)
a) startup manager
press and hold option on startup. Do u see your HDD?
b) if you have a back up of your data then you can boot to the install disk and perform an erase and install
repairing the permission will not work since the disc's OS is different from the HDD's OS.

Power Mac G5 :: Freezes While Loading OS X

ok so today, i went to a friends house to backup their power mac g5, i backed it up all fine, then removed the backed up files from the computer (I DID NOT TOUCH THE SYSTEM FILES) i then reeboted the computer and it got as far as the loading osx screen then it just froze there. Can someone please help? mabye there is a way to reset it? Im not sure what version the osx is.

iMac G5 won't start...
http://support.apple.com/kb/HT2173
Did it boot from any of those other modes?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Power mac g5--won't boot, and I can't sleep

Hi all,
I'm hoping someone is awake and can help. My power mac g5, circa 2005, has always come with some problems, specifically, kernal panics. It's not bad RAM, but I have never tested the video card. Oddly enough, it seems to go down most often in the most in simple internet applications.
Today, it froze in Firefox and I cannot get it to reboot. It stalls/freezes in the gray apple screen. Called my IT friend, and he said to zap the PRAM. That brought it back up for a second, and then it froze again. I replaced the battery, no results.
I can't get it to boot in safe mode or even single-user- it freezes up as well. I certainly can't get it up long enough to load the boot disk.
It may be garbage...I can accept that...but it is holding hours of work. Will I be able to retrieve this??
Help
Message was edited by: nigelsupercat

Hi, I'm having same problem. G5 1.8 dual processor purchased March '05, won't boot. Not from cd either.
Took it to the apple geniuses and first was told it might be a bad board or processor and that I might as well just buy a new system. Well, I can't, because I still need to run some classic applications for business reasons, and because of that I'm stuck at Mac OS X 10.3.9. Anyway... I left my system with the apple geniuses and got a call 3 days later saying it was fixed @ no charge and that the 3rd party USB card was bad. They pulled it and said all was well.Great!, saving me $800 charge for a new board and over $430 for a new processor. So on the way home I buy a new USB hub get home start up and nothing! No change. Back to the Apple Store and after some testing this time I'm told it's definitely a bad hard drive. So, on the way home I buy a new hard drive. Get back, install the new HD and, you guessed it, can't format the disk, system won't boot from CD. BACK TO THE APPLE GENIUSES AGAIN! Now they tell me it's definitely the logic board. After 5 days I'm back where I started... except I have an old USB card that is most likely fine and new USB hub and a new HD I purchased because the Apple Geniuses told me they were bad! I asked them if they would apply a credit of some sort for the unnecessary purchases and my time (The closest Apple Store is 30 miles away), They politely said we appologize for the inconvenience, but no, we can't do that. I've been using Macs of all kinds since the early 1980's. And have never had one fail! Since I started looking into G5 problems, I've found many others with this startup issue. I feel there is a known issue with this series that apple is intentionally sweeping under the rug instead of issuing a recall or credit.

My power mac G5 won't boot up but has red flashing light and intense fan noise.

I Have a Power Mac G5 that flashes a red light that I've never seen before. There is nothing on the monitor and the fan noise is incredible.
HAs anyone ever had this problem?

Hi Michael,
It's normal for the fans to go full speed if the OS won't load to handle them.
Where is this red light, on the logic board, or front panel?
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547
LED 1—CPU A: red—contact Apple or an Apple Authorized Service Provider
LED 2—Overtemp: red—contact Apple or an Apple Authorized Service Provider
LED 3—Power On: red—the main power is on
LED 4—Trickle: yellow—Power Mac G5 is plugged into the wall correctly
LED 5—Open Firmware good: green—no problem
LED 6—CPU B: red—contact Apple or an Apple Authorized Service Provider
LED 7—Checkstop: red—contact Apple or an Apple Authorized Service Provider

Power Mac G4 Won't startup and ejects boot disk.

Hello,
Recently, I got a used Power Mac G4. On startup, it gets to the loading bar and doesn't load anything. It's just a blank white bar with no text aside from the apple logo at the top of the window. I tried inserting the Tiger recovery disk, but when I turn it on, it ejects the disk. I made sure that my keyboard and mouse were not plugged in as it was booting up (there are no other devices that may be causing it to eject), but it's still not solving the problem.
What could possibly be causing this problem?
Thanks,
Nami

It could easily be many things, Logic Board, RAM,Corrupted PRAM or NVRAM, even PSU or anything else, we just have don't have enough data out here to narrow it down yet.
I don't suppose it boots into Target mode...
http://support.apple.com/kb/HT1661
EDIT: Sometimes even a flaky Optical Drive will prevent normal operation & needs to be disconnected.
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & if weak can cause really strange problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Power Mac G4 won't boot in OS X

I have a number of G4's which have been upgraded to Tiger. I am on the last machine running 9.2.2 and it refuses to boot in 10.4. I have tried the Tiger installation CDs, from a firewire drive with a good copy of Tiger on and from a new internal disk with a clean copy of tiger on (Installed via another Mac). All I get is the G4 sitting there with a blank screen with the fan running - no start up question marks or anything.
Does anyone have any idea why this mac won't recognize OS X at all?
TIA
PS Firmware update claims that it is not needed.

First let me ask you this, when you install for the first did your machine boot from the 10.4 or not.
And if you did, sounds like everything is ok if you have what you said you have
G4 350mhz, 512mb RAM, 40 gb drive with OS 9 ,80 gb drive with 10.4
(1) Have you check the Battery Type 3.6V Lithium maybe is out.
(2) did you removed the processor if is 350mhz or did you remove the video card.
Here's a link that might help you out that's if you haven't done it already.
http://docs.info.apple.com/article.html?artnum=301341
Here's a link about the Mac and choose the one you have ok
http://lowendmac.com/ppc/g4upgrades.html
http://lowendmac.com/ppc/yikes-power-mac-g4-pci.html
Here's a old PCworld link for Mac G4
http://www.pcworld.com/article/id,130282/article.html
And at last the link for Apple.
http://docs.info.apple.com/article.html?artnum=301341

Power Mac G5 won't start up and is beeping

Dear friends,
This morning, my Power Mac G5 started to beep. When I try to restart it, it beeps some more and also makes a clicking sound like a metronome.
The computer won't start up anymore. At startup, it displays a grey screen with a little folder in the center that flashes a question mark and a finder icon.
What is wrong with my excellent computer, and how do I fix it?
Marnie

Marnie Glickman-
Could be a variety of things, but most likely your hard drive is not happy. The flashing question mark means that the system is trying to find a working disk with a valid system on it. Should be the hard drive. Isn't.
Launch from the install DVD of the latest OSX system you have. Under the Apple Menu should be the Disk Utility. Launch it and try repairing your hard drive and see if that does the trick.
If not we dig deeper into this excellent problem.
Luck-
-DaddyPaycheck

Power Mac G5 won't start up after a security update, please help!!!

Hi all,
My Power Mac G5 version 10.4.11 keeps showing a black video, no beep, no start up chim, this occured after updating a security patch 2008-7 from Apple website, asked to reboot then I encountered this mess.
The powerlight is turn on with solid white color. My display also has its powerlight turn on with solid white. But not nothing happens, except the fan noise becomes gradually louder and louder. I wait for hours ... but ...
My system just won't start up. Although I tried to reset the SMU, reseated RAM...
I tried also to re-install the OS by CD but it's impossible to insert it to the DVD tray.
Any help is greatly appreciated, thank you for your time.
Sgmed.

Hi BDAqua,
After weeks of strugle I can use my MAC as normal, but everytime I shut it down, she cannot wake-up, I had to refer to your hints in order to start it up again. So right now I can use my MAC every day with "SLEEP" mode.
She just cannot RE-START or wake up after a SHUTDOWN.
Any suggestion is greatly appreciated, here under I pasted the log file retrieved from Disk Utilities.
(I tried also to reset PMU, SMU and PRAM but nothing helped. Perhaps she is in need of a brand new PRAM battery???
Oct 26 23:54:04: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Preparing to secure free space : “Untitled”
Creating Temporary File
Securely erasing file
Creating Temporary File
Securely erasing file
Secure Erase Free Space stopped after 14 hours.
89.0% complete.
Erase complete.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Group differs on ./private/etc/authorization, should be 80, group is 0
The privileges have been verified or repaired on the selected volume
Permissions verification complete
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Owner and group corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Owner and group corrected on ./Users/Shared/SC Info
Permissions corrected on ./Users/Shared/SC Info
Group differs on ./private/etc/authorization, should be 80, group is 0
Owner and group corrected on ./private/etc/authorization
Permissions corrected on ./private/etc/authorization
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.5 GB (237,882,122,240 Bytes)
Used : 11.2 GB (12,042,969,088 Bytes)
Number of Files : 298,349
Number of Folders : 76,969
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
70 %)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 27 20:59:00: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,949,358,080 Bytes)
Used : 11.2 GB (11,975,733,248 Bytes)
Number of Files : 298,359
Number of Folders : 76,970
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 28 00:31:37: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 28 18:50:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 28 21:00:10: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Oct 29 19:55:10: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,921,976,320 Bytes)
Used : 11.2 GB (12,003,115,008 Bytes)
Number of Files : 299,521
Number of Folders : 77,045
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 29 20:22:20: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 17:14:49: Disk Utility started.
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,409,587,200 Bytes)
Used : 11.7 GB (12,515,504,128 Bytes)
Number of Files : 299,790
Number of Folders : 77,188
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 19:41:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 31 20:48:58: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,362,040,832 Bytes)
Used : 11.7 GB (12,563,050,496 Bytes)
Number of Files : 300,773
Number of Folders : 77,858
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 15:48:08: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,411,020,800 Bytes)
Used : 11.7 GB (12,514,070,528 Bytes)
Number of Files : 300,976
Number of Folders : 77,880
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 16:12:13: Disk Utility started.

Help!! My Power Mac G5 won't start up!!

I was working on my computer when all of a sudden everything froze. I tried all the key commands and no response. So, I held the start button until it shut down. Then when I tried to start it back up again after a few minutes, by pushing the start button, only the fan starts. No start up chime. Nothing on my screen. Then the fan starts getting louder and louder like it going to explode! I quickly held the start button again until it shut down. I read through the manual and tried everything it said and still the same thing. I read through alot of the questions and answers on this forum...found alot of similar questions, but no answers that I can use. I tried replacing the surge protector, but still nothing. My business & life is on this computer and stupid me, I didn't back up much! Help!!

Hi Jen:
See if this helps:
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1018.html
"Disk Utility 10.5 Help
Testing and repairing your startup disk
If you have problems with your startup disk, you can use Disk Utility to test and repair it. To do so, you must start up from another disk, such as your Install Mac OS X disc.
Start up your computer using another disk.
To use the Install Mac OS X disc, insert the disc and restart your computer holding down the"C" Key OR (Option key and then select the Install Mac OS X disc and click the arrow).
Open Disk Utility.
In the Mac OS X Installer, choose Utilities > Open Disk Utility.
Select the startup disk you want to repair in the list of disks and volumes, then click First Aid.
Click the button to verify or repair the disk or disk permissions.
Check the S.M.A.R.T. status of your hard disk at the bottom of the window. If it shows "Verified," the disk has nothing wrong at this time. If you see "About to Fail" in red letters, back up your files on the disk as soon as possible and replace the disk."
And:
http://docs.info.apple.com/article.html?artnum=300537
"Troubleshooting: My computer displays no video
If your computer won't display video, here's how to troubleshoot it. Please keep in mind that although your computer may display similar symptoms that prevent it from turning on, this article discusses what to do if the computer won't display video, meaning that when you press the power button:
You may hear a startup chime
You may hear fan or drive noise
You may see the power light on the computer light up
If your computer does not turn on, when you press the power button:
You won't hear a startup chime
You won't hear any fan or drive noise
The power indicator on the computer won't light up at all
If your computer is not responding at all, see the Troubleshooting: My computer won't turn on article instead.
If your computer won't display video but you can hear a startup chime, fans, drive noise, or you see the power light turn on, the first question is whether you have an external display attached (such as a Power Mac G4, Power Mac G5, Mac Pro or Mac mini) or if the display is built-in (such as an iMac, eMac, MacBook, MacBook Pro, iBook or PowerBook).
For external displays
Try these steps to resolve the issue:
Make sure that the monitor is turned on and has power. Make sure that the display's power cord is plugged into a working wall outlet, and that it's properly connected to the power adapter. (To check if the wall socket is working, plug in a lamp or other electrical device.)
Check that all video cable connections to the computer video port and to the monitor are properly connected.
Examine the pins on the video cable connector to make sure they are not bent or damaged in any way.
Connect a known working display (if you have an extra one available). If you see video after doing so, replace your old display.
Reset the computer's parameter RAM. (Click the link for instructions.)
On a Mac mini, reset the computer's PMU. (Click the link for instructions.) For Power Macintosh G3, Power Mac G4, or Power Mac G5 computers, check your user guide for the location of the PMU reset button on the logic board.
Next we're going to check to see if the computer has video when started up from a disc:
Find the Install or Restore disc that came with the computer. Insert the Software Install and Restore disc into your CD/DVD drive. The disc may look something like the picture below.
Shut down your computer.
Once it's off, hold down the C key on the keyboard and start up your computer. This will start up the computer from the Software Install and Restore disc instead of your hard drive.
If you see video when started up from disc, you may have corrupted software. You can use the Archive and Install feature of the Mac OS X installer to reinstall. This kind of installation gives you a fresh version of Mac OS X, but you don't lose any data from the computer as your old information is all archived.
If you tried all of the steps above and the computer still won't display video, contact Apple technical support (1-800-APL-CARE in the U.S.) or take your computer to your local Apple Store or Apple Authorized Service Provider (AASP) for diagnosis.
For built-in displays
Try these steps to resolve the issue:
Make sure that the power cord is plugged into a working wall outlet, and that it's properly connected to the power adapter. (To check if the wall socket is working, plug in a lamp or other electrical device.)
Make sure that the power adapter is properly connected to the power port on the back of the computer.
Reset the computer's parameter RAM. (Click the link for instructions.)
On an iBook or PowerBook, reset the computer's PMU. (Click the link for instructions.)
Next we're going to check to see if the computer has video when started up from a disc:
Find the Install or Restore disc that came with the computer. Insert the Software Install and Restore disc into your CD/DVD drive. The disc may look something like the picture below.
Shut down your computer.
Once it's off, hold down the C key on the keyboard and start up your computer. This will start up the computer from the Software Install and Restore disc instead of your hard drive.
If you see video when started up from disc, you may have corrupted software. You can use the Archive and Install feature of the Mac OS X installer to reinstall. This kind of installation gives you a fresh version of Mac OS X, but you don't lose any data from the computer as your old information is all archived.
If you tried all of the steps above and the computer still won't display video, contact Apple technical support (1-800-APL-CARE in the U.S.) or take your computer to your local Apple Store or Apple Authorized Service Provider (AASP) for diagnosis".
-Robert

Power Mac G5 won't restart after installing 10.4.10 update

Good Morning,
Last night I finally updated my Power Mac G5 to Tiger. That went just fine and I verified that everything was still functional and I could still connect to the web via my DSL. No problems yet...
I then downloaded the 10.4.10 update from Apple and installed it. When asked for Restart or Shutdown I chose Restart. The beginning of my problem. Upon restart I got the chime and the grey screen with the apple logo followed by the spinning stopwatch icon. It just kept spinning...for like 20 minutes. Then the fans started to wind up louder and louder and the spinning stopwatch icon stopped in it's tracks. I shut it down. It happened again.
Suggestions?
Trying to start from a disc (while holding down the "C" key) didn't seem to work any differently and wound up at the same result. Ironically, it just came out of the extended Applecare warranty this past February.
Thanks for any suggestions in advance,
Jim

So you can't use Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk? It won't get there? If it does, does your drive show up, and what is it's S.M.A.R.T. status please?
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
Cheers!
DALE

Power Mac G4 Won't Boot after Installing 2nd Hard Drive and Additional RAM

Hello. I am using a Power Mac G4 (PCI graphics) that I bought a few weeks ago. It was working perfectly fine until I tried to add an additional hard drive and add more RAM to the machine. After I closed the case and plugged it back in, it won't start up at all. No sound, no lights, nothing spinning, nothing. I removed the added hard drive and RAM, but it still refuses to start. I don't know what happened. Hopefully it's not a logic board failure or anything else equally bad.

Welcome to Apple Discussions!
The PowerMac G4 PCI forum is over here:
http://discussions.apple.com/forum.jspa?forumID=586
I'll ask a moderator to move your thread. Try replacing the clock battery, and hitting the CUDAS switch.

Power Mac G5 won' Start Up

Power Mac G5 (bought in 2005) won't start up. Power Cords and plugs have been checked,House fuse box is Ok because other computer on the same power strip goes on as well as my printer. Press the power button nfor the G5 and nothing happens. I was able to use it on 5/5/13 powered up and shut down normally. Need help in trouble shooting.

OOPs, you marked it answered/Solved, might repst to get more helpers looking at it.
Is there a Red LED lit on the logic board?
If not then there is no 5V DC to start up.
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Power Mac G5 Won't Connect to Linsys Router via PC

Greetings, I'm running a Windows XP Professional machine that is hard wired to a cable modem and connected to a Linksys Router (the WRT54G). I have a Power Mac G5 in the basement(running Panther) that recognizes the router but won't allow me to connect to the network, claiming I'm entering an invalid password. My original problem started without having the external airport antenna, but I received that today and still, no signal. The PC also recognizes an internal IP address beginning with 192... and the Mac recognizes one beginning with 169....anyone have any suggestions? I'm pulling my hair out of my head. Thanks.
Tonytee
Power Mac G5 Mac OS X (10.3.7)

sorry..you do have the configuration right. i think i'm having problems with both. i've been on the phone with Mac, Linksys and Microsoft for the last two weeks and no one can seem to figure out the problem. I took my G5 to an Apple Store, had the card tested and it worked. I've also connected the internet directly into the Mac and through the Router via Ehternet and that works.
I set the PC up with the Linksys software and created a Network---though, I can't seem to locate it on the PC. My Mac recognizes the Networks there when I click on the Airport Icon in the upper right hand corner, but tells me my password is invalid-same if I use Network Setup Assistant. If I Create a New Network through Airport and choose the Router's Channel, I get an Airport Window that shows full signal strength, but there are no lines in my Airport Icon in the upper right hand corner of my desktop, but rather a small box that looks like a mini TV inside the icon. Bizarre.
That is my dilemma in a nutshell. And as I said earlier, both machines still have Internal IP addresses. If I try and configure on the Mac Automatically, I get zilch. And the maddening thing is that I was actually able to get online about two weeks ago when this nightmare started..I didn't get past my Home Page, but I got on. Hope this clears it up a bit. Thanks.
Tonytee

Power Mac G4 won't come on

My husband has a Power Mac G4 running tiger 10.4.9. The computer itself is about 5 or 6 years old. All had been fine until last evening when he went to start it. It was plugged into a battery backup system. After that was turned on, he pushed the computers power button. The power button lights when he pushes it, then goes out as soon as he lets go. The computer won't come on. He unplugged it from the battery bar, let it sit for an hour then plugged it directly into a wall outlet, same problem. He then left it, the modem, the router, and the battery bar unplugged for the night. Plugging everything in again today he still can't get the computer to come on. Anyone know what his problem may be? Help would be greatly appreciated.
Thanks,
Kaye

Disconnect your external devices & cables; remove the battery; reset the PMU; depress and hold in the front power button for a few seconds; let the Mac sit for 30 minutes; reconnect only the power cord, keyboard, monitor and mouse; then attempt startup again without the battery. If it starts up, then shut down, disconnect the cables, re-insert the battery and power up again.
If it instead still doesn't start up, then disconnect the hard drive(s), reseat your internal cards and RAM, reset the PMU again and try booting to disc. If still no luck, disconnect the monitor and try again, listening for the startup chime. If still no luck, test the AGP's power supply. If the power supply checks out okay, then look to the front panel board or the logic board as potential problem sources.
The internal battery should read at least 3.3 volts DC when checked with a voltmeter. If it reads anything lower, definitely replace it. A fresh 3.6 volt replacement battery should read 3.6 to 3.9 volts.
Gary

Power mac G5 won't load OS

Similar Messages

Maybe you are looking for